@@ -527,6 +527,10 @@ static const struct venus_resources sdm845_res_v2 = {
.vmem_size = 0,
.vmem_addr = 0,
.dma_mask = 0xe0000000 - 1,
+ .cp_start = 0,
+ .cp_size = 0x70800000,
+ .cp_nonpixel_start = 0x1000000,
+ .cp_nonpixel_size = 0x24800000,
.fwname = "qcom/venus-5.2/venus.mdt",
};
@@ -68,6 +68,10 @@ struct venus_resources {
unsigned int vmem_id;
u32 vmem_size;
u32 vmem_addr;
+ u32 cp_start;
+ u32 cp_size;
+ u32 cp_nonpixel_start;
+ u32 cp_nonpixel_size;
const char *fwname;
};
@@ -181,6 +181,7 @@ static int venus_shutdown_no_tz(struct venus_core *core)
int venus_boot(struct venus_core *core)
{
struct device *dev = core->dev;
+ const struct venus_resources *res = core->res;
phys_addr_t mem_phys;
size_t mem_size;
int ret;
@@ -200,7 +201,22 @@ int venus_boot(struct venus_core *core)
else
ret = venus_boot_no_tz(core, mem_phys, mem_size);
- return ret;
+ if (ret)
+ return ret;
+
+ if (core->use_tz && res->cp_size) {
+ ret = qcom_scm_mem_protect_video_var(res->cp_start,
+ res->cp_size,
+ res->cp_nonpixel_start,
+ res->cp_nonpixel_size);
+ if (ret) {
+ dev_err(dev, "set virtual address ranges fail (%d)\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
}
int venus_shutdown(struct venus_core *core)
In order to boot some of the new Venus firmware versions TZ call to set virtual address ranges is needed. Add virtual address ranges for CP and CP_NONPIX in resource structure and use them when loading and booting the firmware on remote processor. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> --- drivers/media/platform/qcom/venus/core.c | 4 ++++ drivers/media/platform/qcom/venus/core.h | 4 ++++ drivers/media/platform/qcom/venus/firmware.c | 18 +++++++++++++++++- 3 files changed, 25 insertions(+), 1 deletion(-)