diff mbox series

[v5,4/6] media: i2c: imx319: Support probe while the device is off

Message ID 20200810142747.12400-5-sakari.ailus@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series Support running driver's probe for a device powered off | expand

Commit Message

Sakari Ailus Aug. 10, 2020, 2:27 p.m. UTC 
From: Rajmohan Mani <rajmohan.mani@intel.com>

Tell ACPI device PM code that the driver supports the device being powered
off when the driver's probe function is entered.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/imx319.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c
index 17c2e4b41221e..dc5ebff6a85a3 100644
--- a/drivers/media/i2c/imx319.c
+++ b/drivers/media/i2c/imx319.c
@@ -2424,6 +2424,7 @@  static struct imx319_hwcfg *imx319_get_hwcfg(struct device *dev)
 static int imx319_probe(struct i2c_client *client)
 {
 	struct imx319 *imx319;
+	bool low_power;
 	int ret;
 	u32 i;
 
@@ -2436,11 +2437,14 @@  static int imx319_probe(struct i2c_client *client)
 	/* Initialize subdev */
 	v4l2_i2c_subdev_init(&imx319->sd, client, &imx319_subdev_ops);
 
-	/* Check module identity */
-	ret = imx319_identify_module(imx319);
-	if (ret) {
-		dev_err(&client->dev, "failed to find sensor: %d", ret);
-		goto error_probe;
+	low_power = acpi_dev_state_low_power(&client->dev);
+	if (!low_power) {
+		/* Check module identity */
+		ret = imx319_identify_module(imx319);
+		if (ret) {
+			dev_err(&client->dev, "failed to find sensor: %d", ret);
+			goto error_probe;
+		}
 	}
 
 	imx319->hwcfg = imx319_get_hwcfg(&client->dev);
@@ -2493,10 +2497,10 @@  static int imx319_probe(struct i2c_client *client)
 		goto error_media_entity;
 
 	/*
-	 * Device is already turned on by i2c-core with ACPI domain PM.
-	 * Enable runtime PM and turn off the device.
+	 * Don't set the device's state to active if it's in a low power state.
 	 */
-	pm_runtime_set_active(&client->dev);
+	if (!low_power)
+		pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
 	pm_runtime_idle(&client->dev);
 
@@ -2536,7 +2540,7 @@  static const struct dev_pm_ops imx319_pm_ops = {
 };
 
 static const struct acpi_device_id imx319_acpi_ids[] = {
-	{ "SONY319A" },
+	{ "SONY319A", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(acpi, imx319_acpi_ids);
@@ -2549,6 +2553,7 @@  static struct i2c_driver imx319_i2c_driver = {
 	},
 	.probe_new = imx319_probe,
 	.remove = imx319_remove,
+	.flags = I2C_DRV_FL_ALLOW_LOW_POWER_PROBE,
 };
 module_i2c_driver(imx319_i2c_driver);