diff mbox series

[v3,2/5] media: dt-bindings: media: renesas,drif: Convert to json-schema

Message ID 20201013150150.14801-3-fabrizio.castro.jz@renesas.com (mailing list archive)
State New, archived
Headers show
Series Add r8a77965 DRIF support | expand

Commit Message

Fabrizio Castro Oct. 13, 2020, 3:01 p.m. UTC
Convert the Renesas DRIF bindings to DT schema and update
MAINTAINERS accordingly.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2->3:
* Removed the definition of pinctrl-0 and pinctrl-names, as
  suggested by Geert
* Added "power-domains" to the list of required properties,
  as suggested by Geert
* Reworked the conditional requirements, Geert, what do you
  think?
v1->v2:
* s/controller/Controller/ in the title of renesas,drif.yaml
  as suggested by Laurent.

 .../bindings/media/renesas,drif.txt           | 177 -----------
 .../bindings/media/renesas,drif.yaml          | 282 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 283 insertions(+), 178 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt
 create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml

Comments

Geert Uytterhoeven Oct. 14, 2020, 1:39 p.m. UTC | #1
Hi Fabrizio,

On Tue, Oct 13, 2020 at 5:02 PM Fabrizio Castro
<fabrizio.castro.jz@renesas.com> wrote:
> Convert the Renesas DRIF bindings to DT schema and update
> MAINTAINERS accordingly.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> v2->3:
> * Removed the definition of pinctrl-0 and pinctrl-names, as
>   suggested by Geert
> * Added "power-domains" to the list of required properties,
>   as suggested by Geert
> * Reworked the conditional requirements, Geert, what do you
>   think?

Thanks for the update!


> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml

> +allOf:
> +  - if:
> +      required:
> +        - renesas,primary-bond
> +    then:
> +      required:
> +        - pinctrl-0
> +        - pinctrl-names
> +        - port
> +
> +  - if:
> +      required:
> +        - port
> +    then:
> +      required:
> +        - pinctrl-0
> +        - pinctrl-names
> +
> +  - if:
> +      not:
> +        required:
> +          - port
> +    then:

This can just be an "else" branch for the previous "if" statement?

> +      properties:
> +        pinctrl-0: false
> +        pinctrl-names: false

With the above fixed/clarified:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
Fabrizio Castro Oct. 14, 2020, 3:10 p.m. UTC | #2
Hi Geert,

Thank you for your feedback!

> From: Geert Uytterhoeven <geert@linux-m68k.org>
> Sent: 14 October 2020 14:40
> Subject: Re: [PATCH v3 2/5] media: dt-bindings: media: renesas,drif: Convert
> to json-schema
>
> Hi Fabrizio,
>
> On Tue, Oct 13, 2020 at 5:02 PM Fabrizio Castro
> <fabrizio.castro.jz@renesas.com> wrote:
> > Convert the Renesas DRIF bindings to DT schema and update
> > MAINTAINERS accordingly.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-
> lad.rj@bp.renesas.com>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > v2->3:
> > * Removed the definition of pinctrl-0 and pinctrl-names, as
> >   suggested by Geert
> > * Added "power-domains" to the list of required properties,
> >   as suggested by Geert
> > * Reworked the conditional requirements, Geert, what do you
> >   think?
>
> Thanks for the update!
>
>
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
>
> > +allOf:
> > +  - if:
> > +      required:
> > +        - renesas,primary-bond
> > +    then:
> > +      required:
> > +        - pinctrl-0
> > +        - pinctrl-names
> > +        - port
> > +
> > +  - if:
> > +      required:
> > +        - port
> > +    then:
> > +      required:
> > +        - pinctrl-0
> > +        - pinctrl-names
> > +
> > +  - if:
> > +      not:
> > +        required:
> > +          - port
> > +    then:
>
> This can just be an "else" branch for the previous "if" statement?

Yes, it's equivalent. I'll send out v4 to tackle this.

Thanks,
Fab

>
> > +      properties:
> > +        pinctrl-0: false
> > +        pinctrl-names: false
>
> With the above fixed/clarified:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds


Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt
deleted file mode 100644
index 0d8974aa8b38..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,drif.txt
+++ /dev/null
@@ -1,177 +0,0 @@ 
-Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
-------------------------------------------------------------
-
-R-Car Gen3 DRIF is a SPI like receive only slave device. A general
-representation of DRIF interfacing with a master device is shown below.
-
-+---------------------+                +---------------------+
-|                     |-----SCK------->|CLK                  |
-|       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
-|                     |-----SD0------->|D0                   |
-|                     |-----SD1------->|D1                   |
-+---------------------+                +---------------------+
-
-As per datasheet, each DRIF channel (drifn) is made up of two internal
-channels (drifn0 & drifn1). These two internal channels share the common
-CLK & SYNC. Each internal channel has its own dedicated resources like
-irq, dma channels, address space & clock. This internal split is not
-visible to the external master device.
-
-The device tree model represents each internal channel as a separate node.
-The internal channels sharing the CLK & SYNC are tied together by their
-phandles using a property called "renesas,bonding". For the rest of
-the documentation, unless explicitly stated, the word channel implies an
-internal channel.
-
-When both internal channels are enabled they need to be managed together
-as one (i.e.) they cannot operate alone as independent devices. Out of the
-two, one of them needs to act as a primary device that accepts common
-properties of both the internal channels. This channel is identified by a
-property called "renesas,primary-bond".
-
-To summarize,
-   - When both the internal channels that are bonded together are enabled,
-     the zeroth channel is selected as primary-bond. This channels accepts
-     properties common to all the members of the bond.
-   - When only one of the bonded channels need to be enabled, the property
-     "renesas,bonding" or "renesas,primary-bond" will have no effect. That
-     enabled channel can act alone as any other independent device.
-
-Required properties of an internal channel:
--------------------------------------------
-- compatible:	"renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC.
-		"renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC.
-		"renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device.
-
-		When compatible with the generic version, nodes must list the
-		SoC-specific version corresponding to the platform first
-		followed by the generic version.
-
-- reg: offset and length of that channel.
-- interrupts: associated with that channel.
-- clocks: phandle and clock specifier of that channel.
-- clock-names: clock input name string: "fck".
-- dmas: phandles to the DMA channels.
-- dma-names: names of the DMA channel: "rx".
-- renesas,bonding: phandle to the other channel.
-
-Optional properties of an internal channel:
--------------------------------------------
-- power-domains: phandle to the respective power domain.
-
-Required properties of an internal channel when:
-	- It is the only enabled channel of the bond (or)
-	- If it acts as primary among enabled bonds
---------------------------------------------------------
-- pinctrl-0: pin control group to be used for this channel.
-- pinctrl-names: must be "default".
-- renesas,primary-bond: empty property indicating the channel acts as primary
-			among the bonded channels.
-- port: child port node corresponding to the data input, in accordance with
-	the video interface bindings defined in
-	Documentation/devicetree/bindings/media/video-interfaces.txt. The port
-	node must contain at least one endpoint.
-
-Optional endpoint property:
----------------------------
-- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
-	       This property maps to SYNCAC bit in the hardware manual. The
-	       default is 1 (active high).
-
-Example:
---------
-
-(1) Both internal channels enabled:
------------------------------------
-
-When interfacing with a third party tuner device with two data pins as shown
-below.
-
-+---------------------+                +---------------------+
-|                     |-----SCK------->|CLK                  |
-|       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
-|                     |-----SD0------->|D0                   |
-|                     |-----SD1------->|D1                   |
-+---------------------+                +---------------------+
-
-	drif00: rif@e6f40000 {
-		compatible = "renesas,r8a7795-drif",
-			     "renesas,rcar-gen3-drif";
-		reg = <0 0xe6f40000 0 0x64>;
-		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 515>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x20>, <&dmac2 0x20>;
-		dma-names = "rx", "rx";
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		renesas,bonding = <&drif01>;
-		renesas,primary-bond;
-		pinctrl-0 = <&drif0_pins>;
-		pinctrl-names = "default";
-		port {
-			drif0_ep: endpoint {
-			     remote-endpoint = <&tuner_ep>;
-			};
-		};
-	};
-
-	drif01: rif@e6f50000 {
-		compatible = "renesas,r8a7795-drif",
-			     "renesas,rcar-gen3-drif";
-		reg = <0 0xe6f50000 0 0x64>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 514>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x22>, <&dmac2 0x22>;
-		dma-names = "rx", "rx";
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		renesas,bonding = <&drif00>;
-	};
-
-
-(2) Internal channel 1 alone is enabled:
-----------------------------------------
-
-When interfacing with a third party tuner device with one data pin as shown
-below.
-
-+---------------------+                +---------------------+
-|                     |-----SCK------->|CLK                  |
-|       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
-|                     |                |D0 (unused)          |
-|                     |-----SD-------->|D1                   |
-+---------------------+                +---------------------+
-
-	drif00: rif@e6f40000 {
-		compatible = "renesas,r8a7795-drif",
-			     "renesas,rcar-gen3-drif";
-		reg = <0 0xe6f40000 0 0x64>;
-		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 515>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x20>, <&dmac2 0x20>;
-		dma-names = "rx", "rx";
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		renesas,bonding = <&drif01>;
-	};
-
-	drif01: rif@e6f50000 {
-		compatible = "renesas,r8a7795-drif",
-			     "renesas,rcar-gen3-drif";
-		reg = <0 0xe6f50000 0 0x64>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 514>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x22>, <&dmac2 0x22>;
-		dma-names = "rx", "rx";
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		renesas,bonding = <&drif00>;
-		pinctrl-0 = <&drif0_pins>;
-		pinctrl-names = "default";
-		port {
-			drif0_ep: endpoint {
-			     remote-endpoint = <&tuner_ep>;
-			     sync-active = <0>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
new file mode 100644
index 000000000000..e260cb4f169e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -0,0 +1,282 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF)
+
+maintainers:
+  - Ramesh Shanmugasundaram <rashanmu@gmail.com>
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+description: |
+  R-Car Gen3 DRIF is a SPI like receive only slave device. A general
+  representation of DRIF interfacing with a master device is shown below.
+
+  +---------------------+                +---------------------+
+  |                     |-----SCK------->|CLK                  |
+  |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  |                     |-----SD0------->|D0                   |
+  |                     |-----SD1------->|D1                   |
+  +---------------------+                +---------------------+
+
+  As per datasheet, each DRIF channel (drifn) is made up of two internal
+  channels (drifn0 & drifn1). These two internal channels share the common
+  CLK & SYNC. Each internal channel has its own dedicated resources like
+  irq, dma channels, address space & clock. This internal split is not
+  visible to the external master device.
+
+  The device tree model represents each internal channel as a separate node.
+  The internal channels sharing the CLK & SYNC are tied together by their
+  phandles using a property called "renesas,bonding". For the rest of
+  the documentation, unless explicitly stated, the word channel implies an
+  internal channel.
+
+  When both internal channels are enabled they need to be managed together
+  as one (i.e.) they cannot operate alone as independent devices. Out of the
+  two, one of them needs to act as a primary device that accepts common
+  properties of both the internal channels. This channel is identified by a
+  property called "renesas,primary-bond".
+
+  To summarize,
+     * When both the internal channels that are bonded together are enabled,
+       the zeroth channel is selected as primary-bond. This channels accepts
+       properties common to all the members of the bond.
+     * When only one of the bonded channels need to be enabled, the property
+       "renesas,bonding" or "renesas,primary-bond" will have no effect. That
+       enabled channel can act alone as any other independent device.
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - renesas,r8a7795-drif        # R-Car H3
+        - renesas,r8a7796-drif        # R-Car M3-W
+      - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+    items:
+      - const: fck
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: rx
+      - const: rx
+
+  renesas,bonding:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to the other internal channel of DRIF
+
+  power-domains:
+    maxItems: 1
+
+  renesas,primary-bond:
+    type: boolean
+    description:
+      Indicates that the channel acts as primary among the bonded channels.
+
+  port:
+    type: object
+    description:
+      Child port node corresponding to the data input, in accordance with the
+      video interface bindings defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      The port node must contain at least one endpoint.
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          remote-endpoint:
+            description:
+              A phandle to the remote tuner endpoint subnode in remote node
+              port.
+
+          sync-active:
+            enum: [0, 1]
+            description:
+              Indicates sync signal polarity, 0/1 for low/high respectively.
+              This property maps to SYNCAC bit in the hardware manual. The
+              default is 1 (active high).
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+  - renesas,bonding
+  - power-domains
+
+allOf:
+  - if:
+      required:
+        - renesas,primary-bond
+    then:
+      required:
+        - pinctrl-0
+        - pinctrl-names
+        - port
+
+  - if:
+      required:
+        - port
+    then:
+      required:
+        - pinctrl-0
+        - pinctrl-names
+
+  - if:
+      not:
+        required:
+          - port
+    then:
+      properties:
+        pinctrl-0: false
+        pinctrl-names: false
+
+additionalProperties: false
+
+examples:
+  # Example with both internal channels enabled.
+  #
+  # When interfacing with a third party tuner device with two data pins as shown
+  # below.
+  #
+  # +---------------------+                +---------------------+
+  # |                     |-----SCK------->|CLK                  |
+  # |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  # |                     |-----SD0------->|D0                   |
+  # |                     |-----SD1------->|D1                   |
+  # +---------------------+                +---------------------+
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            drif00: rif@e6f40000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f40000 0 0x64>;
+                    interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 515>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    renesas,bonding = <&drif01>;
+                    resets = <&cpg 515>;
+                    renesas,primary-bond;
+                    pinctrl-0 = <&drif0_pins>;
+                    pinctrl-names = "default";
+                    port {
+                            drif0_ep: endpoint {
+                                 remote-endpoint = <&tuner_ep>;
+                            };
+                    };
+            };
+
+            drif01: rif@e6f50000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f50000 0 0x64>;
+                    interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 514>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    renesas,bonding = <&drif00>;
+                    resets = <&cpg 514>;
+            };
+    };
+
+  # Example with internal channel 1 alone enabled.
+  #
+  # When interfacing with a third party tuner device with one data pin as shown
+  # below.
+  #
+  # +---------------------+                +---------------------+
+  # |                     |-----SCK------->|CLK                  |
+  # |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  # |                     |                |D0 (unused)          |
+  # |                     |-----SD-------->|D1                   |
+  # +---------------------+                +---------------------+
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            drif10: rif@e6f60000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f60000 0 0x64>;
+                    interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 513>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    resets = <&cpg 513>;
+                    renesas,bonding = <&drif11>;
+                    status = "disabled";
+            };
+
+            drif11: rif@e6f70000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f70000 0 0x64>;
+                    interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 512>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    resets = <&cpg 512>;
+                    renesas,bonding = <&drif10>;
+                    pinctrl-0 = <&drif1_pins>;
+                    pinctrl-names = "default";
+                    port {
+                            drif1_ep: endpoint {
+                                 remote-endpoint = <&tuner_ep1>;
+                                 sync-active = <0>;
+                            };
+                    };
+            };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 4ff8e65df4e7..797718391b38 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10840,7 +10840,7 @@  L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/renesas,drif.txt
+F:	Documentation/devicetree/bindings/media/renesas,drif.yaml
 F:	drivers/media/platform/rcar_drif.c
 
 MEDIA DRIVERS FOR RENESAS - FCP