diff mbox series

[v2,2/3] dt-bindings: imx7-csi: convert bindings to yaml

Message ID 20201014142759.726823-3-rmfrfs@gmail.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: media: imx7 and ov2680 updates to yaml | expand

Commit Message

Rui Miguel Silva Oct. 14, 2020, 2:27 p.m. UTC
Convert imx7-csi bindings documentation to yaml schema, remove the
textual bindings document and update MAINTAINERS entry.

Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
---
 .../devicetree/bindings/media/imx7-csi.txt    | 42 ----------
 .../bindings/media/nxp,imx7-csi.yaml          | 84 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 85 insertions(+), 43 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/imx7-csi.txt
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml

Comments

Jacopo Mondi Oct. 15, 2020, 3:25 p.m. UTC | #1
Hi Rui,

On Wed, Oct 14, 2020 at 03:27:58PM +0100, Rui Miguel Silva wrote:
> Convert imx7-csi bindings documentation to yaml schema, remove the
> textual bindings document and update MAINTAINERS entry.
>
> Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
> ---
>  .../devicetree/bindings/media/imx7-csi.txt    | 42 ----------
>  .../bindings/media/nxp,imx7-csi.yaml          | 84 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 85 insertions(+), 43 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/imx7-csi.txt
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt
> deleted file mode 100644
> index d80ceefa0c00..000000000000
> --- a/Documentation/devicetree/bindings/media/imx7-csi.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -Freescale i.MX7 CMOS Sensor Interface
> -=====================================
> -
> -csi node
> ---------
> -
> -This is device node for the CMOS Sensor Interface (CSI) which enables the chip
> -to connect directly to external CMOS image sensors.
> -
> -Required properties:
> -
> -- compatible    : "fsl,imx7-csi" or "fsl,imx6ul-csi";
> -- reg           : base address and length of the register set for the device;
> -- interrupts    : should contain CSI interrupt;
> -- clocks        : list of clock specifiers, see
> -        Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
> -- clock-names   : must contain "mclk";
> -
> -The device node shall contain one 'port' child node with one child 'endpoint'
> -node, according to the bindings defined in:
> -Documentation/devicetree/bindings/media/video-interfaces.txt.
> -
> -In the following example a remote endpoint is a video multiplexer.
> -
> -example:
> -
> -                csi: csi@30710000 {
> -                        #address-cells = <1>;
> -                        #size-cells = <0>;
> -
> -                        compatible = "fsl,imx7-csi";
> -                        reg = <0x30710000 0x10000>;
> -                        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> -                        clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
> -                        clock-names = "mclk";
> -
> -                        port {
> -                                csi_from_csi_mux: endpoint {
> -                                        remote-endpoint = <&csi_mux_to_csi>;
> -                                };
> -                        };
> -                };
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> new file mode 100644
> index 000000000000..9fe064dd5ba3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: GPL-2.0

Shouldn't bindings be dual licensed ?

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX7 CMOS Sensor Interface
> +
> +maintainers:
> +  - Rui Miguel Silva <rmfrfs@gmail.com>
> +
> +description: |
> +  This is device node for the CMOS Sensor Interface (CSI) which enables the
> +  chip to connect directly to external CMOS image sensors.

Pretty cryptic, not your fault as it was there already. Is NXP using
CSI as a name but it's not really MIPI CSI-2 ? This seems to be a
bridge, right ?

> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx7-csi
> +      - fsl,imx6ul-csi
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: mclk
> +
> +  port:
> +    type: object
> +    additionalProperties: false
> +    description:
> +      A node containing input port nodes with endpoint definitions as documented
> +      in Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +    properties:
> +      endpoint:
> +        type: object
> +        additionalProperties: false
> +
> +        properties:
> +          remote-endpoint: true
> +
> +        required:
> +          - remote-endpoint
> +
> +    required:
> +      - endpoint

As per the comment on ov2680, this last part can be removed

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - port
> +
> +unevaluatedProperties: false

additionalProperties: false ?

This apart
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Thanks
  j

> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx7d-clock.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    csi: csi@30710000 {
> +            compatible = "fsl,imx7-csi";
> +            reg = <0x30710000 0x10000>;
> +            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
> +            clock-names = "mclk";
> +
> +            port {
> +                    csi_from_csi_mux: endpoint {
> +                            remote-endpoint = <&csi_mux_to_csi>;
> +                    };
> +            };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 926dcdc4794c..b7f7f14cd85b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10773,8 +10773,8 @@ L:	linux-media@vger.kernel.org
>  S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/admin-guide/media/imx7.rst
> -F:	Documentation/devicetree/bindings/media/imx7-csi.txt
>  F:	Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
> +F:	Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
>  F:	drivers/staging/media/imx/imx7-media-csi.c
>  F:	drivers/staging/media/imx/imx7-mipi-csis.c
>
> --
> 2.28.0
>
Rui Miguel Silva Oct. 16, 2020, 2:44 p.m. UTC | #2
Hi Jacopo,

On Thu, Oct 15, 2020 at 05:25:46PM +0200, Jacopo Mondi wrote:
> Hi Rui,
> 
> On Wed, Oct 14, 2020 at 03:27:58PM +0100, Rui Miguel Silva wrote:
> > Convert imx7-csi bindings documentation to yaml schema, remove the
> > textual bindings document and update MAINTAINERS entry.
> >
> > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
> > ---
> >  .../devicetree/bindings/media/imx7-csi.txt    | 42 ----------
> >  .../bindings/media/nxp,imx7-csi.yaml          | 84 +++++++++++++++++++
> >  MAINTAINERS                                   |  2 +-
> >  3 files changed, 85 insertions(+), 43 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/media/imx7-csi.txt
> >  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt
> > deleted file mode 100644
> > index d80ceefa0c00..000000000000
> > --- a/Documentation/devicetree/bindings/media/imx7-csi.txt
> > +++ /dev/null
> > @@ -1,42 +0,0 @@
> > -Freescale i.MX7 CMOS Sensor Interface
> > -=====================================
> > -
> > -csi node
> > ---------
> > -
> > -This is device node for the CMOS Sensor Interface (CSI) which enables the chip
> > -to connect directly to external CMOS image sensors.
> > -
> > -Required properties:
> > -
> > -- compatible    : "fsl,imx7-csi" or "fsl,imx6ul-csi";
> > -- reg           : base address and length of the register set for the device;
> > -- interrupts    : should contain CSI interrupt;
> > -- clocks        : list of clock specifiers, see
> > -        Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
> > -- clock-names   : must contain "mclk";
> > -
> > -The device node shall contain one 'port' child node with one child 'endpoint'
> > -node, according to the bindings defined in:
> > -Documentation/devicetree/bindings/media/video-interfaces.txt.
> > -
> > -In the following example a remote endpoint is a video multiplexer.
> > -
> > -example:
> > -
> > -                csi: csi@30710000 {
> > -                        #address-cells = <1>;
> > -                        #size-cells = <0>;
> > -
> > -                        compatible = "fsl,imx7-csi";
> > -                        reg = <0x30710000 0x10000>;
> > -                        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> > -                        clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
> > -                        clock-names = "mclk";
> > -
> > -                        port {
> > -                                csi_from_csi_mux: endpoint {
> > -                                        remote-endpoint = <&csi_mux_to_csi>;
> > -                                };
> > -                        };
> > -                };
> > diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> > new file mode 100644
> > index 000000000000..9fe064dd5ba3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> > @@ -0,0 +1,84 @@
> > +# SPDX-License-Identifier: GPL-2.0
> 
> Shouldn't bindings be dual licensed ?

right.

> 
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: i.MX7 CMOS Sensor Interface
> > +
> > +maintainers:
> > +  - Rui Miguel Silva <rmfrfs@gmail.com>
> > +
> > +description: |
> > +  This is device node for the CMOS Sensor Interface (CSI) which enables the
> > +  chip to connect directly to external CMOS image sensors.
> 
> Pretty cryptic, not your fault as it was there already. Is NXP using
> CSI as a name but it's not really MIPI CSI-2 ? This seems to be a
> bridge, right ?

Correct, original naming issues.

> 
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - fsl,imx7-csi
> > +      - fsl,imx6ul-csi
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: mclk
> > +
> > +  port:
> > +    type: object
> > +    additionalProperties: false
> > +    description:
> > +      A node containing input port nodes with endpoint definitions as documented
> > +      in Documentation/devicetree/bindings/media/video-interfaces.txt
> > +
> > +    properties:
> > +      endpoint:
> > +        type: object
> > +        additionalProperties: false
> > +
> > +        properties:
> > +          remote-endpoint: true
> > +
> > +        required:
> > +          - remote-endpoint
> > +
> > +    required:
> > +      - endpoint
> 
> As per the comment on ov2680, this last part can be removed
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - port
> > +
> > +unevaluatedProperties: false
> 
> additionalProperties: false ?
> 
> This apart
> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Thanks,
Cheers,
   Rui
> 
> Thanks
>   j
> 
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/imx7d-clock.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    csi: csi@30710000 {
> > +            compatible = "fsl,imx7-csi";
> > +            reg = <0x30710000 0x10000>;
> > +            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> > +            clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
> > +            clock-names = "mclk";
> > +
> > +            port {
> > +                    csi_from_csi_mux: endpoint {
> > +                            remote-endpoint = <&csi_mux_to_csi>;
> > +                    };
> > +            };
> > +    };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 926dcdc4794c..b7f7f14cd85b 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -10773,8 +10773,8 @@ L:	linux-media@vger.kernel.org
> >  S:	Maintained
> >  T:	git git://linuxtv.org/media_tree.git
> >  F:	Documentation/admin-guide/media/imx7.rst
> > -F:	Documentation/devicetree/bindings/media/imx7-csi.txt
> >  F:	Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
> > +F:	Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> >  F:	drivers/staging/media/imx/imx7-media-csi.c
> >  F:	drivers/staging/media/imx/imx7-mipi-csis.c
> >
> > --
> > 2.28.0
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt
deleted file mode 100644
index d80ceefa0c00..000000000000
--- a/Documentation/devicetree/bindings/media/imx7-csi.txt
+++ /dev/null
@@ -1,42 +0,0 @@ 
-Freescale i.MX7 CMOS Sensor Interface
-=====================================
-
-csi node
---------
-
-This is device node for the CMOS Sensor Interface (CSI) which enables the chip
-to connect directly to external CMOS image sensors.
-
-Required properties:
-
-- compatible    : "fsl,imx7-csi" or "fsl,imx6ul-csi";
-- reg           : base address and length of the register set for the device;
-- interrupts    : should contain CSI interrupt;
-- clocks        : list of clock specifiers, see
-        Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
-- clock-names   : must contain "mclk";
-
-The device node shall contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in:
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-In the following example a remote endpoint is a video multiplexer.
-
-example:
-
-                csi: csi@30710000 {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        compatible = "fsl,imx7-csi";
-                        reg = <0x30710000 0x10000>;
-                        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-                        clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
-                        clock-names = "mclk";
-
-                        port {
-                                csi_from_csi_mux: endpoint {
-                                        remote-endpoint = <&csi_mux_to_csi>;
-                                };
-                        };
-                };
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
new file mode 100644
index 000000000000..9fe064dd5ba3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -0,0 +1,84 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX7 CMOS Sensor Interface
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |
+  This is device node for the CMOS Sensor Interface (CSI) which enables the
+  chip to connect directly to external CMOS image sensors.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx7-csi
+      - fsl,imx6ul-csi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  port:
+    type: object
+    additionalProperties: false
+    description:
+      A node containing input port nodes with endpoint definitions as documented
+      in Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      endpoint:
+        type: object
+        additionalProperties: false
+
+        properties:
+          remote-endpoint: true
+
+        required:
+          - remote-endpoint
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    csi: csi@30710000 {
+            compatible = "fsl,imx7-csi";
+            reg = <0x30710000 0x10000>;
+            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
+            clock-names = "mclk";
+
+            port {
+                    csi_from_csi_mux: endpoint {
+                            remote-endpoint = <&csi_mux_to_csi>;
+                    };
+            };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 926dcdc4794c..b7f7f14cd85b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10773,8 +10773,8 @@  L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/admin-guide/media/imx7.rst
-F:	Documentation/devicetree/bindings/media/imx7-csi.txt
 F:	Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
+F:	Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
 F:	drivers/staging/media/imx/imx7-media-csi.c
 F:	drivers/staging/media/imx/imx7-mipi-csis.c