| Message ID | 20201014142759.726823-4-rmfrfs@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: media: imx7 and ov2680 updates to yaml | expand |
Hi Rui, On Wed, Oct 14, 2020 at 03:27:59PM +0100, Rui Miguel Silva wrote: > Convert imx7 mipi csi2 bindings documentation to yaml schema, remove > the textual document and update MAINTAINERS entry. > > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> > --- > .../bindings/media/imx7-mipi-csi2.txt | 90 --------- > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 181 ++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 182 insertions(+), 91 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > deleted file mode 100644 > index 71fd74ed3ec8..000000000000 > --- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > +++ /dev/null > @@ -1,90 +0,0 @@ > -Freescale i.MX7 Mipi CSI2 > -========================= > - > -mipi_csi2 node > --------------- > - > -This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is > -compatible with previous version of Samsung D-phy. > - > -Required properties: > - > -- compatible : "fsl,imx7-mipi-csi2"; > -- reg : base address and length of the register set for the device; > -- interrupts : should contain MIPI CSIS interrupt; > -- clocks : list of clock specifiers, see > - Documentation/devicetree/bindings/clock/clock-bindings.txt for details; > -- clock-names : must contain "pclk", "wrap" and "phy" entries, matching > - entries in the clock property; > -- power-domains : a phandle to the power domain, see > - Documentation/devicetree/bindings/power/power_domain.txt for details. > -- reset-names : should include following entry "mrst"; > -- resets : a list of phandle, should contain reset entry of > - reset-names; > -- phy-supply : from the generic phy bindings, a phandle to a regulator that > - provides power to MIPI CSIS core; > - > -Optional properties: > - > -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default > - value when this property is not specified is 166 MHz; > -- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; > - > -The device node should contain two 'port' child nodes with one child 'endpoint' > -node, according to the bindings defined in: > - Documentation/devicetree/bindings/ media/video-interfaces.txt. > - The following are properties specific to those nodes. > - > -port node > ---------- > - > -- reg : (required) can take the values 0 or 1, where 0 shall be > - related to the sink port and port 1 shall be the source > - one; > - > -endpoint node > -------------- > - > -- data-lanes : (required) an array specifying active physical MIPI-CSI2 > - data input lanes and their mapping to logical lanes; this > - shall only be applied to port 0 (sink port), the array's > - content is unused only its length is meaningful, > - in this case the maximum length supported is 2; > - > -example: > - > - mipi_csi: mipi-csi@30750000 { > - #address-cells = <1>; > - #size-cells = <0>; > - > - compatible = "fsl,imx7-mipi-csi2"; > - reg = <0x30750000 0x10000>; > - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clks IMX7D_IPG_ROOT_CLK>, > - <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > - clock-names = "pclk", "wrap", "phy"; > - clock-frequency = <166000000>; > - power-domains = <&pgc_mipi_phy>; > - phy-supply = <®_1p0d>; > - resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > - reset-names = "mrst"; > - fsl,csis-hs-settle = <3>; > - > - port@0 { > - reg = <0>; > - > - mipi_from_sensor: endpoint { > - remote-endpoint = <&ov2680_to_mipi>; > - data-lanes = <1>; > - }; > - }; > - > - port@1 { > - reg = <1>; > - > - mipi_vc0_to_csi_mux: endpoint { > - remote-endpoint = <&csi_mux_from_mipi_vc0>; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > new file mode 100644 > index 000000000000..0438b28232ed > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > @@ -0,0 +1,181 @@ > +# SPDX-License-Identifier: GPL-2.0-only Same question about dual licensing > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP i.MX7 Mipi CSI2 > + > +maintainers: > + - Rui Miguel Silva <rmfrfs@gmail.com> > + > +description: | > + this is the device node for the mipi csi-2 receiver core in i.mx7 soc. it is > + compatible with previous version of samsung d-phy. nit: missing a few captial letters (beginning and after a full stop). > + > +properties: > + compatible: > + items: > + - enum: > + - fsl,imx7-mipi-csi2 Should enum with a single item be expressed as a const ? > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + minItems: 3 > + > + clock-names: > + items: > + - const: pclk > + - const: wrap > + - const: phy > + > + power-domains: > + maxItems: 1 > + > + phy-supply: > + description: > + Phandle to a regulator that provides power to the PHY. This > + regulator will be managed during the PHY power on/off sequence. > + > + resets: > + maxItems: 1 > + > + reset-names: > + const: mrst > + > + clock-frequency: This was here already, but shouldn't this property be assigned in the clock provider and you should have here a reference to it ? Otherwise, is this really a custom property hijacking a standard property name ? I see it is mentioned in the example-schema.yaml, so it's probably correct. > + description: > + The IP main (system bus) clock frequency in Hertz > + default: 166000000 > + > + fsl,csis-hs-settle: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + differential receiver (HS-RX) settle time You have used capital letters at the beginning of documentation blocks before. > + > + ports: > + type: object > + description: > + A node containing input and output port nodes with endpoint definitions > + as documented in > + Documentation/devicetree/bindings/media/video-interfaces.txt > + > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + port@0: > + type: object > + description: > + Input port node, single endpoint describing the CSI-2 transmitter. > + > + properties: > + reg: > + const: 0 > + > + endpoint: > + type: object > + > + properties: > + data-lanes: > + maxItems: 1 How many data lanes does this receiver supports ? I see in the txt bindingsd: data-lanes : (required) an array specifying active physical MIPI-CSI2 data input lanes and their mapping to logical lanes; this shall only be applied to port 0 (sink port), the array's content is unused only its length is meaningful, in this case the maximum length supported is 2; I'm not sure I fully get this. Does this mean up to 2 data lanes are supported ? > + > + remote-endpoint: true > + > + required: > + - data-lanes > + - remote-endpoint > + > + additionalProperties: false > + > + additionalProperties: false > + > + port@1: > + type: object > + description: > + Output port node, Rougue ',' at the end. You probably want a full stop or > + > + properties: > + reg: > + const: 1 > + > + endpoint: > + type: object > + > + properties: > + remote-endpoint: true > + > + required: > + - remote-endpoint > + > + additionalProperties: false As no other endpoint property is specified, the whole 'endpoint' block can probably be omitted ? > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names > + - power-domains > + - resets > + - reset-names > + - ports phy-supply was listed as required in the txt bindings > + > +unevaluatedProperties: false additionalProperties: false Thanks j > + > +examples: > + - | > + #include <dt-bindings/clock/imx7d-clock.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/reset/imx7-reset.h> > + > + mipi_csi: mipi-csi@30750000 { > + compatible = "fsl,imx7-mipi-csi2"; > + reg = <0x30750000 0x10000>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + > + clocks = <&clks IMX7D_IPG_ROOT_CLK>, > + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > + clock-names = "pclk", "wrap", "phy"; > + clock-frequency = <166000000>; > + > + power-domains = <&pgc_mipi_phy>; > + phy-supply = <®_1p0d>; > + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > + reset-names = "mrst"; > + fsl,csis-hs-settle = <3>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + mipi_from_sensor: endpoint { > + remote-endpoint = <&ov2680_to_mipi>; > + data-lanes = <1>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + mipi_vc0_to_csi_mux: endpoint { > + remote-endpoint = <&csi_mux_from_mipi_vc0>; > + }; > + }; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index b7f7f14cd85b..9da67222b0c7 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -10773,8 +10773,8 @@ L: linux-media@vger.kernel.org > S: Maintained > T: git git://linuxtv.org/media_tree.git > F: Documentation/admin-guide/media/imx7.rst > -F: Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml > +F: Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > F: drivers/staging/media/imx/imx7-media-csi.c > F: drivers/staging/media/imx/imx7-mipi-csis.c > > -- > 2.28.0 >
Hi again Jacopo, On Thu, Oct 15, 2020 at 05:52:51PM +0200, Jacopo Mondi wrote: > Hi Rui, > > On Wed, Oct 14, 2020 at 03:27:59PM +0100, Rui Miguel Silva wrote: > > Convert imx7 mipi csi2 bindings documentation to yaml schema, remove > > the textual document and update MAINTAINERS entry. > > > > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> > > --- > > .../bindings/media/imx7-mipi-csi2.txt | 90 --------- > > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 181 ++++++++++++++++++ > > MAINTAINERS | 2 +- > > 3 files changed, 182 insertions(+), 91 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > deleted file mode 100644 > > index 71fd74ed3ec8..000000000000 > > --- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > +++ /dev/null > > @@ -1,90 +0,0 @@ > > -Freescale i.MX7 Mipi CSI2 > > -========================= > > - > > -mipi_csi2 node > > --------------- > > - > > -This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is > > -compatible with previous version of Samsung D-phy. > > - > > -Required properties: > > - > > -- compatible : "fsl,imx7-mipi-csi2"; > > -- reg : base address and length of the register set for the device; > > -- interrupts : should contain MIPI CSIS interrupt; > > -- clocks : list of clock specifiers, see > > - Documentation/devicetree/bindings/clock/clock-bindings.txt for details; > > -- clock-names : must contain "pclk", "wrap" and "phy" entries, matching > > - entries in the clock property; > > -- power-domains : a phandle to the power domain, see > > - Documentation/devicetree/bindings/power/power_domain.txt for details. > > -- reset-names : should include following entry "mrst"; > > -- resets : a list of phandle, should contain reset entry of > > - reset-names; > > -- phy-supply : from the generic phy bindings, a phandle to a regulator that > > - provides power to MIPI CSIS core; > > - > > -Optional properties: > > - > > -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default > > - value when this property is not specified is 166 MHz; > > -- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; > > - > > -The device node should contain two 'port' child nodes with one child 'endpoint' > > -node, according to the bindings defined in: > > - Documentation/devicetree/bindings/ media/video-interfaces.txt. > > - The following are properties specific to those nodes. > > - > > -port node > > ---------- > > - > > -- reg : (required) can take the values 0 or 1, where 0 shall be > > - related to the sink port and port 1 shall be the source > > - one; > > - > > -endpoint node > > -------------- > > - > > -- data-lanes : (required) an array specifying active physical MIPI-CSI2 > > - data input lanes and their mapping to logical lanes; this > > - shall only be applied to port 0 (sink port), the array's > > - content is unused only its length is meaningful, > > - in this case the maximum length supported is 2; > > - > > -example: > > - > > - mipi_csi: mipi-csi@30750000 { > > - #address-cells = <1>; > > - #size-cells = <0>; > > - > > - compatible = "fsl,imx7-mipi-csi2"; > > - reg = <0x30750000 0x10000>; > > - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > > - clocks = <&clks IMX7D_IPG_ROOT_CLK>, > > - <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > > - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > > - clock-names = "pclk", "wrap", "phy"; > > - clock-frequency = <166000000>; > > - power-domains = <&pgc_mipi_phy>; > > - phy-supply = <®_1p0d>; > > - resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > > - reset-names = "mrst"; > > - fsl,csis-hs-settle = <3>; > > - > > - port@0 { > > - reg = <0>; > > - > > - mipi_from_sensor: endpoint { > > - remote-endpoint = <&ov2680_to_mipi>; > > - data-lanes = <1>; > > - }; > > - }; > > - > > - port@1 { > > - reg = <1>; > > - > > - mipi_vc0_to_csi_mux: endpoint { > > - remote-endpoint = <&csi_mux_from_mipi_vc0>; > > - }; > > - }; > > - }; > > diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > new file mode 100644 > > index 000000000000..0438b28232ed > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > @@ -0,0 +1,181 @@ > > +# SPDX-License-Identifier: GPL-2.0-only > > Same question about dual licensing > > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: NXP i.MX7 Mipi CSI2 > > + > > +maintainers: > > + - Rui Miguel Silva <rmfrfs@gmail.com> > > + > > +description: | > > + this is the device node for the mipi csi-2 receiver core in i.mx7 soc. it is > > + compatible with previous version of samsung d-phy. > > nit: missing a few captial letters (beginning and after a full stop). will fix along all document. > > + > > +properties: > > + compatible: > > + items: > > + - enum: > > + - fsl,imx7-mipi-csi2 > > Should enum with a single item be expressed as a const ? agree. > > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + clocks: > > + minItems: 3 > > + > > + clock-names: > > + items: > > + - const: pclk > > + - const: wrap > > + - const: phy > > + > > + power-domains: > > + maxItems: 1 > > + > > + phy-supply: > > + description: > > + Phandle to a regulator that provides power to the PHY. This > > + regulator will be managed during the PHY power on/off sequence. > > + > > + resets: > > + maxItems: 1 > > + > > + reset-names: > > + const: mrst > > + > > + clock-frequency: > > This was here already, but shouldn't this property be assigned in the > clock provider and you should have here a reference to it ? Otherwise, > is this really a custom property hijacking a standard property name ? > > I see it is mentioned in the example-schema.yaml, so it's probably > correct. I think limits and default can be assigned here. > > > + description: > > + The IP main (system bus) clock frequency in Hertz > > + default: 166000000 > > + > > + fsl,csis-hs-settle: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + differential receiver (HS-RX) settle time > > You have used capital letters at the beginning of documentation blocks > before. > > > + > > + ports: > > + type: object > > + description: > > + A node containing input and output port nodes with endpoint definitions > > + as documented in > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > + > > + properties: > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > + port@0: > > + type: object > > + description: > > + Input port node, single endpoint describing the CSI-2 transmitter. > > + > > + properties: > > + reg: > > + const: 0 > > + > > + endpoint: > > + type: object > > + > > + properties: > > + data-lanes: > > + maxItems: 1 > > How many data lanes does this receiver supports ? I see in the txt > bindingsd: > data-lanes : (required) an array specifying active physical MIPI-CSI2 > data input lanes and their mapping to logical lanes; this > shall only be applied to port 0 (sink port), the array's > content is unused only its length is meaningful, > in this case the maximum length supported is 2; > > I'm not sure I fully get this. Does this mean up to 2 data lanes are > supported ? yeah, it supports up to 2 data lanes. Will fix > > > + > > + remote-endpoint: true > > + > > + required: > > + - data-lanes > > + - remote-endpoint > > + > > + additionalProperties: false > > + > > + additionalProperties: false > > + > > + port@1: > > + type: object > > + description: > > + Output port node, > > Rougue ',' at the end. You probably want a full stop or > > + > > + properties: > > + reg: > > + const: 1 > > + > > + endpoint: > > + type: object > > + > > + properties: > > + remote-endpoint: true > > + > > + required: > > + - remote-endpoint > > + > > + additionalProperties: false > > As no other endpoint property is specified, the whole 'endpoint' block > can probably be omitted ? > > > + > > + additionalProperties: false > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - clocks > > + - clock-names > > + - power-domains > > + - resets > > + - reset-names > > + - ports > > phy-supply was listed as required in the txt bindings good catch. > > > + > > +unevaluatedProperties: false > > additionalProperties: false > Thanks again for your review. Cheers, Rui > Thanks > j > > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/imx7d-clock.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/reset/imx7-reset.h> > > + > > + mipi_csi: mipi-csi@30750000 { > > + compatible = "fsl,imx7-mipi-csi2"; > > + reg = <0x30750000 0x10000>; > > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > > + > > + clocks = <&clks IMX7D_IPG_ROOT_CLK>, > > + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > > + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > > + clock-names = "pclk", "wrap", "phy"; > > + clock-frequency = <166000000>; > > + > > + power-domains = <&pgc_mipi_phy>; > > + phy-supply = <®_1p0d>; > > + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > > + reset-names = "mrst"; > > + fsl,csis-hs-settle = <3>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + mipi_from_sensor: endpoint { > > + remote-endpoint = <&ov2680_to_mipi>; > > + data-lanes = <1>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + mipi_vc0_to_csi_mux: endpoint { > > + remote-endpoint = <&csi_mux_from_mipi_vc0>; > > + }; > > + }; > > + }; > > + }; > > diff --git a/MAINTAINERS b/MAINTAINERS > > index b7f7f14cd85b..9da67222b0c7 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -10773,8 +10773,8 @@ L: linux-media@vger.kernel.org > > S: Maintained > > T: git git://linuxtv.org/media_tree.git > > F: Documentation/admin-guide/media/imx7.rst > > -F: Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml > > +F: Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > F: drivers/staging/media/imx/imx7-media-csi.c > > F: drivers/staging/media/imx/imx7-mipi-csis.c > > > > -- > > 2.28.0 > >
On Wed, 14 Oct 2020 15:27:59 +0100, Rui Miguel Silva wrote: > Convert imx7 mipi csi2 bindings documentation to yaml schema, remove > the textual document and update MAINTAINERS entry. > > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> > --- > .../bindings/media/imx7-mipi-csi2.txt | 90 --------- > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 181 ++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 182 insertions(+), 91 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > My bot found errors running 'make dt_binding_check' on your patch: ./Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml:111:15: [warning] wrong indentation: expected 12 but found 14 (indentation) See https://patchwork.ozlabs.org/patch/1382165 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
Hi Rui, On Fri, Oct 16, 2020 at 03:51:09PM +0100, Rui Miguel Silva wrote: > Hi again Jacopo, > On Thu, Oct 15, 2020 at 05:52:51PM +0200, Jacopo Mondi wrote: > > Hi Rui, > > > > On Wed, Oct 14, 2020 at 03:27:59PM +0100, Rui Miguel Silva wrote: > > > Convert imx7 mipi csi2 bindings documentation to yaml schema, remove > > > the textual document and update MAINTAINERS entry. > > > > > > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> > > > --- > > > .../bindings/media/imx7-mipi-csi2.txt | 90 --------- > > > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 181 ++++++++++++++++++ > > > MAINTAINERS | 2 +- > > > 3 files changed, 182 insertions(+), 91 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > deleted file mode 100644 > > > index 71fd74ed3ec8..000000000000 > > > --- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > +++ /dev/null > > > @@ -1,90 +0,0 @@ > > > -Freescale i.MX7 Mipi CSI2 > > > -========================= > > > - > > > -mipi_csi2 node > > > --------------- > > > - > > > -This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is > > > -compatible with previous version of Samsung D-phy. > > > - > > > -Required properties: > > > - > > > -- compatible : "fsl,imx7-mipi-csi2"; > > > -- reg : base address and length of the register set for the device; > > > -- interrupts : should contain MIPI CSIS interrupt; > > > -- clocks : list of clock specifiers, see > > > - Documentation/devicetree/bindings/clock/clock-bindings.txt for details; > > > -- clock-names : must contain "pclk", "wrap" and "phy" entries, matching > > > - entries in the clock property; > > > -- power-domains : a phandle to the power domain, see > > > - Documentation/devicetree/bindings/power/power_domain.txt for details. > > > -- reset-names : should include following entry "mrst"; > > > -- resets : a list of phandle, should contain reset entry of > > > - reset-names; > > > -- phy-supply : from the generic phy bindings, a phandle to a regulator that > > > - provides power to MIPI CSIS core; > > > - > > > -Optional properties: > > > - > > > -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default > > > - value when this property is not specified is 166 MHz; > > > -- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; > > > - > > > -The device node should contain two 'port' child nodes with one child 'endpoint' > > > -node, according to the bindings defined in: > > > - Documentation/devicetree/bindings/ media/video-interfaces.txt. > > > - The following are properties specific to those nodes. > > > - > > > -port node > > > ---------- > > > - > > > -- reg : (required) can take the values 0 or 1, where 0 shall be > > > - related to the sink port and port 1 shall be the source > > > - one; > > > - > > > -endpoint node > > > -------------- > > > - > > > -- data-lanes : (required) an array specifying active physical MIPI-CSI2 > > > - data input lanes and their mapping to logical lanes; this > > > - shall only be applied to port 0 (sink port), the array's > > > - content is unused only its length is meaningful, > > > - in this case the maximum length supported is 2; > > > - > > > -example: > > > - > > > - mipi_csi: mipi-csi@30750000 { > > > - #address-cells = <1>; > > > - #size-cells = <0>; > > > - > > > - compatible = "fsl,imx7-mipi-csi2"; > > > - reg = <0x30750000 0x10000>; > > > - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > > > - clocks = <&clks IMX7D_IPG_ROOT_CLK>, > > > - <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > > > - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > > > - clock-names = "pclk", "wrap", "phy"; > > > - clock-frequency = <166000000>; > > > - power-domains = <&pgc_mipi_phy>; > > > - phy-supply = <®_1p0d>; > > > - resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > > > - reset-names = "mrst"; > > > - fsl,csis-hs-settle = <3>; > > > - > > > - port@0 { > > > - reg = <0>; > > > - > > > - mipi_from_sensor: endpoint { > > > - remote-endpoint = <&ov2680_to_mipi>; > > > - data-lanes = <1>; > > > - }; > > > - }; > > > - > > > - port@1 { > > > - reg = <1>; > > > - > > > - mipi_vc0_to_csi_mux: endpoint { > > > - remote-endpoint = <&csi_mux_from_mipi_vc0>; > > > - }; > > > - }; > > > - }; > > > diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > new file mode 100644 > > > index 000000000000..0438b28232ed > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > @@ -0,0 +1,181 @@ > > > +# SPDX-License-Identifier: GPL-2.0-only > > > > Same question about dual licensing > > > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: NXP i.MX7 Mipi CSI2 > > > + > > > +maintainers: > > > + - Rui Miguel Silva <rmfrfs@gmail.com> > > > + > > > +description: | > > > + this is the device node for the mipi csi-2 receiver core in i.mx7 soc. it is > > > + compatible with previous version of samsung d-phy. > > > > nit: missing a few captial letters (beginning and after a full stop). > > will fix along all document. > > > > + > > > +properties: > > > + compatible: > > > + items: > > > + - enum: > > > + - fsl,imx7-mipi-csi2 > > > > Should enum with a single item be expressed as a const ? > > agree. > > > > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + interrupts: > > > + maxItems: 1 > > > + > > > + clocks: > > > + minItems: 3 > > > + > > > + clock-names: > > > + items: > > > + - const: pclk > > > + - const: wrap > > > + - const: phy > > > + > > > + power-domains: > > > + maxItems: 1 > > > + > > > + phy-supply: > > > + description: > > > + Phandle to a regulator that provides power to the PHY. This > > > + regulator will be managed during the PHY power on/off sequence. > > > + > > > + resets: > > > + maxItems: 1 > > > + > > > + reset-names: > > > + const: mrst > > > + > > > + clock-frequency: > > > > This was here already, but shouldn't this property be assigned in the > > clock provider and you should have here a reference to it ? Otherwise, > > is this really a custom property hijacking a standard property name ? > > > > I see it is mentioned in the example-schema.yaml, so it's probably > > correct. > > I think limits and default can be assigned here. > > > > > > + description: > > > + The IP main (system bus) clock frequency in Hertz > > > + default: 166000000 > > > + > > > + fsl,csis-hs-settle: > > > + $ref: /schemas/types.yaml#/definitions/uint32 > > > + description: > > > + differential receiver (HS-RX) settle time > > > > You have used capital letters at the beginning of documentation blocks > > before. > > > > > + > > > + ports: > > > + type: object > > > + description: > > > + A node containing input and output port nodes with endpoint definitions > > > + as documented in > > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > > + > > > + properties: > > > + '#address-cells': > > > + const: 1 > > > + > > > + '#size-cells': > > > + const: 0 > > > + > > > + port@0: > > > + type: object > > > + description: > > > + Input port node, single endpoint describing the CSI-2 transmitter. > > > + > > > + properties: > > > + reg: > > > + const: 0 > > > + > > > + endpoint: > > > + type: object > > > + > > > + properties: > > > + data-lanes: > > > + maxItems: 1 > > > > How many data lanes does this receiver supports ? I see in the txt > > bindingsd: > > data-lanes : (required) an array specifying active physical MIPI-CSI2 > > data input lanes and their mapping to logical lanes; this > > shall only be applied to port 0 (sink port), the array's > > content is unused only its length is meaningful, > > in this case the maximum length supported is 2; > > > > I'm not sure I fully get this. Does this mean up to 2 data lanes are > > supported ? > > yeah, it supports up to 2 data lanes. Will fix > This one might get nasty then. For reference, this is what I've been suggested to use by Laurent and Rob in the imx214 conversion (not yet landed afaict) to express that <1 2> and <1 2 3 4> where allowed: + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: See ../video-interfaces.txt + anyOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 Hope it helps. Thanks j > > > > > + > > > + remote-endpoint: true > > > + > > > + required: > > > + - data-lanes > > > + - remote-endpoint > > > + > > > + additionalProperties: false > > > + > > > + additionalProperties: false > > > + > > > + port@1: > > > + type: object > > > + description: > > > + Output port node, > > > > Rougue ',' at the end. You probably want a full stop or > > > + > > > + properties: > > > + reg: > > > + const: 1 > > > + > > > + endpoint: > > > + type: object > > > + > > > + properties: > > > + remote-endpoint: true > > > + > > > + required: > > > + - remote-endpoint > > > + > > > + additionalProperties: false > > > > As no other endpoint property is specified, the whole 'endpoint' block > > can probably be omitted ? > > > > > + > > > + additionalProperties: false > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - interrupts > > > + - clocks > > > + - clock-names > > > + - power-domains > > > + - resets > > > + - reset-names > > > + - ports > > > > phy-supply was listed as required in the txt bindings > > good catch. > > > > > > + > > > +unevaluatedProperties: false > > > > additionalProperties: false > > > > Thanks again for your review. > > Cheers, > Rui > > > Thanks > > j > > > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/clock/imx7d-clock.h> > > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > > + #include <dt-bindings/interrupt-controller/irq.h> > > > + #include <dt-bindings/reset/imx7-reset.h> > > > + > > > + mipi_csi: mipi-csi@30750000 { > > > + compatible = "fsl,imx7-mipi-csi2"; > > > + reg = <0x30750000 0x10000>; > > > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > > > + > > > + clocks = <&clks IMX7D_IPG_ROOT_CLK>, > > > + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > > > + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > > > + clock-names = "pclk", "wrap", "phy"; > > > + clock-frequency = <166000000>; > > > + > > > + power-domains = <&pgc_mipi_phy>; > > > + phy-supply = <®_1p0d>; > > > + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > > > + reset-names = "mrst"; > > > + fsl,csis-hs-settle = <3>; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + reg = <0>; > > > + > > > + mipi_from_sensor: endpoint { > > > + remote-endpoint = <&ov2680_to_mipi>; > > > + data-lanes = <1>; > > > + }; > > > + }; > > > + > > > + port@1 { > > > + reg = <1>; > > > + > > > + mipi_vc0_to_csi_mux: endpoint { > > > + remote-endpoint = <&csi_mux_from_mipi_vc0>; > > > + }; > > > + }; > > > + }; > > > + }; > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > index b7f7f14cd85b..9da67222b0c7 100644 > > > --- a/MAINTAINERS > > > +++ b/MAINTAINERS > > > @@ -10773,8 +10773,8 @@ L: linux-media@vger.kernel.org > > > S: Maintained > > > T: git git://linuxtv.org/media_tree.git > > > F: Documentation/admin-guide/media/imx7.rst > > > -F: Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml > > > +F: Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > F: drivers/staging/media/imx/imx7-media-csi.c > > > F: drivers/staging/media/imx/imx7-mipi-csis.c > > > > > > -- > > > 2.28.0 > > >
Hi Jacopo, On Fri, Oct 16, 2020 at 08:02:13PM +0200, Jacopo Mondi wrote: > Hi Rui, > > On Fri, Oct 16, 2020 at 03:51:09PM +0100, Rui Miguel Silva wrote: > > Hi again Jacopo, > > On Thu, Oct 15, 2020 at 05:52:51PM +0200, Jacopo Mondi wrote: > > > Hi Rui, > > > > > > On Wed, Oct 14, 2020 at 03:27:59PM +0100, Rui Miguel Silva wrote: > > > > Convert imx7 mipi csi2 bindings documentation to yaml schema, remove > > > > the textual document and update MAINTAINERS entry. > > > > > > > > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> > > > > --- > > > > .../bindings/media/imx7-mipi-csi2.txt | 90 --------- > > > > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 181 ++++++++++++++++++ > > > > MAINTAINERS | 2 +- > > > > 3 files changed, 182 insertions(+), 91 deletions(-) > > > > delete mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > > create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > > deleted file mode 100644 > > > > index 71fd74ed3ec8..000000000000 > > > > --- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > > +++ /dev/null > > > > @@ -1,90 +0,0 @@ > > > > -Freescale i.MX7 Mipi CSI2 > > > > -========================= > > > > - > > > > -mipi_csi2 node > > > > --------------- > > > > - > > > > -This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is > > > > -compatible with previous version of Samsung D-phy. > > > > - > > > > -Required properties: > > > > - > > > > -- compatible : "fsl,imx7-mipi-csi2"; > > > > -- reg : base address and length of the register set for the device; > > > > -- interrupts : should contain MIPI CSIS interrupt; > > > > -- clocks : list of clock specifiers, see > > > > - Documentation/devicetree/bindings/clock/clock-bindings.txt for details; > > > > -- clock-names : must contain "pclk", "wrap" and "phy" entries, matching > > > > - entries in the clock property; > > > > -- power-domains : a phandle to the power domain, see > > > > - Documentation/devicetree/bindings/power/power_domain.txt for details. > > > > -- reset-names : should include following entry "mrst"; > > > > -- resets : a list of phandle, should contain reset entry of > > > > - reset-names; > > > > -- phy-supply : from the generic phy bindings, a phandle to a regulator that > > > > - provides power to MIPI CSIS core; > > > > - > > > > -Optional properties: > > > > - > > > > -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default > > > > - value when this property is not specified is 166 MHz; > > > > -- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; > > > > - > > > > -The device node should contain two 'port' child nodes with one child 'endpoint' > > > > -node, according to the bindings defined in: > > > > - Documentation/devicetree/bindings/ media/video-interfaces.txt. > > > > - The following are properties specific to those nodes. > > > > - > > > > -port node > > > > ---------- > > > > - > > > > -- reg : (required) can take the values 0 or 1, where 0 shall be > > > > - related to the sink port and port 1 shall be the source > > > > - one; > > > > - > > > > -endpoint node > > > > -------------- > > > > - > > > > -- data-lanes : (required) an array specifying active physical MIPI-CSI2 > > > > - data input lanes and their mapping to logical lanes; this > > > > - shall only be applied to port 0 (sink port), the array's > > > > - content is unused only its length is meaningful, > > > > - in this case the maximum length supported is 2; > > > > - > > > > -example: > > > > - > > > > - mipi_csi: mipi-csi@30750000 { > > > > - #address-cells = <1>; > > > > - #size-cells = <0>; > > > > - > > > > - compatible = "fsl,imx7-mipi-csi2"; > > > > - reg = <0x30750000 0x10000>; > > > > - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > > > > - clocks = <&clks IMX7D_IPG_ROOT_CLK>, > > > > - <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > > > > - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > > > > - clock-names = "pclk", "wrap", "phy"; > > > > - clock-frequency = <166000000>; > > > > - power-domains = <&pgc_mipi_phy>; > > > > - phy-supply = <®_1p0d>; > > > > - resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > > > > - reset-names = "mrst"; > > > > - fsl,csis-hs-settle = <3>; > > > > - > > > > - port@0 { > > > > - reg = <0>; > > > > - > > > > - mipi_from_sensor: endpoint { > > > > - remote-endpoint = <&ov2680_to_mipi>; > > > > - data-lanes = <1>; > > > > - }; > > > > - }; > > > > - > > > > - port@1 { > > > > - reg = <1>; > > > > - > > > > - mipi_vc0_to_csi_mux: endpoint { > > > > - remote-endpoint = <&csi_mux_from_mipi_vc0>; > > > > - }; > > > > - }; > > > > - }; > > > > diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > > new file mode 100644 > > > > index 000000000000..0438b28232ed > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > > @@ -0,0 +1,181 @@ > > > > +# SPDX-License-Identifier: GPL-2.0-only > > > > > > Same question about dual licensing > > > > > > > +%YAML 1.2 > > > > +--- > > > > +$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > + > > > > +title: NXP i.MX7 Mipi CSI2 > > > > + > > > > +maintainers: > > > > + - Rui Miguel Silva <rmfrfs@gmail.com> > > > > + > > > > +description: | > > > > + this is the device node for the mipi csi-2 receiver core in i.mx7 soc. it is > > > > + compatible with previous version of samsung d-phy. > > > > > > nit: missing a few captial letters (beginning and after a full stop). > > > > will fix along all document. > > > > > > + > > > > +properties: > > > > + compatible: > > > > + items: > > > > + - enum: > > > > + - fsl,imx7-mipi-csi2 > > > > > > Should enum with a single item be expressed as a const ? > > > > agree. > > > > > > > > > + > > > > + reg: > > > > + maxItems: 1 > > > > + > > > > + interrupts: > > > > + maxItems: 1 > > > > + > > > > + clocks: > > > > + minItems: 3 > > > > + > > > > + clock-names: > > > > + items: > > > > + - const: pclk > > > > + - const: wrap > > > > + - const: phy > > > > + > > > > + power-domains: > > > > + maxItems: 1 > > > > + > > > > + phy-supply: > > > > + description: > > > > + Phandle to a regulator that provides power to the PHY. This > > > > + regulator will be managed during the PHY power on/off sequence. > > > > + > > > > + resets: > > > > + maxItems: 1 > > > > + > > > > + reset-names: > > > > + const: mrst > > > > + > > > > + clock-frequency: > > > > > > This was here already, but shouldn't this property be assigned in the > > > clock provider and you should have here a reference to it ? Otherwise, > > > is this really a custom property hijacking a standard property name ? > > > > > > I see it is mentioned in the example-schema.yaml, so it's probably > > > correct. > > > > I think limits and default can be assigned here. > > > > > > > > > + description: > > > > + The IP main (system bus) clock frequency in Hertz > > > > + default: 166000000 > > > > + > > > > + fsl,csis-hs-settle: > > > > + $ref: /schemas/types.yaml#/definitions/uint32 > > > > + description: > > > > + differential receiver (HS-RX) settle time > > > > > > You have used capital letters at the beginning of documentation blocks > > > before. > > > > > > > + > > > > + ports: > > > > + type: object > > > > + description: > > > > + A node containing input and output port nodes with endpoint definitions > > > > + as documented in > > > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > > > + > > > > + properties: > > > > + '#address-cells': > > > > + const: 1 > > > > + > > > > + '#size-cells': > > > > + const: 0 > > > > + > > > > + port@0: > > > > + type: object > > > > + description: > > > > + Input port node, single endpoint describing the CSI-2 transmitter. > > > > + > > > > + properties: > > > > + reg: > > > > + const: 0 > > > > + > > > > + endpoint: > > > > + type: object > > > > + > > > > + properties: > > > > + data-lanes: > > > > + maxItems: 1 > > > > > > How many data lanes does this receiver supports ? I see in the txt > > > bindingsd: > > > data-lanes : (required) an array specifying active physical MIPI-CSI2 > > > data input lanes and their mapping to logical lanes; this > > > shall only be applied to port 0 (sink port), the array's > > > content is unused only its length is meaningful, > > > in this case the maximum length supported is 2; > > > > > > I'm not sure I fully get this. Does this mean up to 2 data lanes are > > > supported ? > > > > yeah, it supports up to 2 data lanes. Will fix > > > > This one might get nasty then. For reference, this is what I've been > suggested to use by Laurent and Rob in the imx214 conversion (not yet > landed afaict) to express that <1 2> and <1 2 3 4> where allowed: > > + properties: > + data-lanes: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: See ../video-interfaces.txt > + anyOf: > + - items: > + - const: 1 > + - const: 2 > + - items: > + - const: 1 > + - const: 2 > + - const: 3 > + - const: 4 > > Hope it helps. Sure it helped, thanks for the hint. ------ Cheers, Rui > > Thanks > j > > > > > > > > + > > > > + remote-endpoint: true > > > > + > > > > + required: > > > > + - data-lanes > > > > + - remote-endpoint > > > > + > > > > + additionalProperties: false > > > > + > > > > + additionalProperties: false > > > > + > > > > + port@1: > > > > + type: object > > > > + description: > > > > + Output port node, > > > > > > Rougue ',' at the end. You probably want a full stop or > > > > + > > > > + properties: > > > > + reg: > > > > + const: 1 > > > > + > > > > + endpoint: > > > > + type: object > > > > + > > > > + properties: > > > > + remote-endpoint: true > > > > + > > > > + required: > > > > + - remote-endpoint > > > > + > > > > + additionalProperties: false > > > > > > As no other endpoint property is specified, the whole 'endpoint' block > > > can probably be omitted ? > > > > > > > + > > > > + additionalProperties: false > > > > + > > > > +required: > > > > + - compatible > > > > + - reg > > > > + - interrupts > > > > + - clocks > > > > + - clock-names > > > > + - power-domains > > > > + - resets > > > > + - reset-names > > > > + - ports > > > > > > phy-supply was listed as required in the txt bindings > > > > good catch. > > > > > > > > > + > > > > +unevaluatedProperties: false > > > > > > additionalProperties: false > > > > > > > Thanks again for your review. > > > > Cheers, > > Rui > > > > > Thanks > > > j > > > > > > > + > > > > +examples: > > > > + - | > > > > + #include <dt-bindings/clock/imx7d-clock.h> > > > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > > > + #include <dt-bindings/interrupt-controller/irq.h> > > > > + #include <dt-bindings/reset/imx7-reset.h> > > > > + > > > > + mipi_csi: mipi-csi@30750000 { > > > > + compatible = "fsl,imx7-mipi-csi2"; > > > > + reg = <0x30750000 0x10000>; > > > > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > > > > + > > > > + clocks = <&clks IMX7D_IPG_ROOT_CLK>, > > > > + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > > > > + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > > > > + clock-names = "pclk", "wrap", "phy"; > > > > + clock-frequency = <166000000>; > > > > + > > > > + power-domains = <&pgc_mipi_phy>; > > > > + phy-supply = <®_1p0d>; > > > > + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > > > > + reset-names = "mrst"; > > > > + fsl,csis-hs-settle = <3>; > > > > + > > > > + ports { > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + > > > > + port@0 { > > > > + reg = <0>; > > > > + > > > > + mipi_from_sensor: endpoint { > > > > + remote-endpoint = <&ov2680_to_mipi>; > > > > + data-lanes = <1>; > > > > + }; > > > > + }; > > > > + > > > > + port@1 { > > > > + reg = <1>; > > > > + > > > > + mipi_vc0_to_csi_mux: endpoint { > > > > + remote-endpoint = <&csi_mux_from_mipi_vc0>; > > > > + }; > > > > + }; > > > > + }; > > > > + }; > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > > index b7f7f14cd85b..9da67222b0c7 100644 > > > > --- a/MAINTAINERS > > > > +++ b/MAINTAINERS > > > > @@ -10773,8 +10773,8 @@ L: linux-media@vger.kernel.org > > > > S: Maintained > > > > T: git git://linuxtv.org/media_tree.git > > > > F: Documentation/admin-guide/media/imx7.rst > > > > -F: Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > > F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml > > > > +F: Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > > F: drivers/staging/media/imx/imx7-media-csi.c > > > > F: drivers/staging/media/imx/imx7-mipi-csis.c > > > > > > > > -- > > > > 2.28.0 > > > >
diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt deleted file mode 100644 index 71fd74ed3ec8..000000000000 --- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt +++ /dev/null @@ -1,90 +0,0 @@ -Freescale i.MX7 Mipi CSI2 -========================= - -mipi_csi2 node --------------- - -This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is -compatible with previous version of Samsung D-phy. - -Required properties: - -- compatible : "fsl,imx7-mipi-csi2"; -- reg : base address and length of the register set for the device; -- interrupts : should contain MIPI CSIS interrupt; -- clocks : list of clock specifiers, see - Documentation/devicetree/bindings/clock/clock-bindings.txt for details; -- clock-names : must contain "pclk", "wrap" and "phy" entries, matching - entries in the clock property; -- power-domains : a phandle to the power domain, see - Documentation/devicetree/bindings/power/power_domain.txt for details. -- reset-names : should include following entry "mrst"; -- resets : a list of phandle, should contain reset entry of - reset-names; -- phy-supply : from the generic phy bindings, a phandle to a regulator that - provides power to MIPI CSIS core; - -Optional properties: - -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default - value when this property is not specified is 166 MHz; -- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; - -The device node should contain two 'port' child nodes with one child 'endpoint' -node, according to the bindings defined in: - Documentation/devicetree/bindings/ media/video-interfaces.txt. - The following are properties specific to those nodes. - -port node ---------- - -- reg : (required) can take the values 0 or 1, where 0 shall be - related to the sink port and port 1 shall be the source - one; - -endpoint node -------------- - -- data-lanes : (required) an array specifying active physical MIPI-CSI2 - data input lanes and their mapping to logical lanes; this - shall only be applied to port 0 (sink port), the array's - content is unused only its length is meaningful, - in this case the maximum length supported is 2; - -example: - - mipi_csi: mipi-csi@30750000 { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "fsl,imx7-mipi-csi2"; - reg = <0x30750000 0x10000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_IPG_ROOT_CLK>, - <&clks IMX7D_MIPI_CSI_ROOT_CLK>, - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; - clock-names = "pclk", "wrap", "phy"; - clock-frequency = <166000000>; - power-domains = <&pgc_mipi_phy>; - phy-supply = <®_1p0d>; - resets = <&src IMX7_RESET_MIPI_PHY_MRST>; - reset-names = "mrst"; - fsl,csis-hs-settle = <3>; - - port@0 { - reg = <0>; - - mipi_from_sensor: endpoint { - remote-endpoint = <&ov2680_to_mipi>; - data-lanes = <1>; - }; - }; - - port@1 { - reg = <1>; - - mipi_vc0_to_csi_mux: endpoint { - remote-endpoint = <&csi_mux_from_mipi_vc0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml new file mode 100644 index 000000000000..0438b28232ed --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX7 Mipi CSI2 + +maintainers: + - Rui Miguel Silva <rmfrfs@gmail.com> + +description: | + this is the device node for the mipi csi-2 receiver core in i.mx7 soc. it is + compatible with previous version of samsung d-phy. + +properties: + compatible: + items: + - enum: + - fsl,imx7-mipi-csi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + + clock-names: + items: + - const: pclk + - const: wrap + - const: phy + + power-domains: + maxItems: 1 + + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + + resets: + maxItems: 1 + + reset-names: + const: mrst + + clock-frequency: + description: + The IP main (system bus) clock frequency in Hertz + default: 166000000 + + fsl,csis-hs-settle: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + differential receiver (HS-RX) settle time + + ports: + type: object + description: + A node containing input and output port nodes with endpoint definitions + as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + data-lanes: + maxItems: 1 + + remote-endpoint: true + + required: + - data-lanes + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + + port@1: + type: object + description: + Output port node, + + properties: + reg: + const: 1 + + endpoint: + type: object + + properties: + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + - reset-names + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx7d-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/reset/imx7-reset.h> + + mipi_csi: mipi-csi@30750000 { + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + clock-frequency = <166000000>; + + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + reset-names = "mrst"; + fsl,csis-hs-settle = <3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index b7f7f14cd85b..9da67222b0c7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10773,8 +10773,8 @@ L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media_tree.git F: Documentation/admin-guide/media/imx7.rst -F: Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml +F: Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml F: drivers/staging/media/imx/imx7-media-csi.c F: drivers/staging/media/imx/imx7-mipi-csis.c
Convert imx7 mipi csi2 bindings documentation to yaml schema, remove the textual document and update MAINTAINERS entry. Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> --- .../bindings/media/imx7-mipi-csi2.txt | 90 --------- .../bindings/media/nxp,imx7-mipi-csi2.yaml | 181 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 182 insertions(+), 91 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml