diff mbox series

[v2,29/29] ccs: Request for "reset" GPIO

Message ID 20201127103325.29814-30-sakari.ailus@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series Linux CCS driver preparation | expand

Commit Message

Sakari Ailus Nov. 27, 2020, 10:33 a.m. UTC 
The DT bindings documented "reset-gpios" property but the driver never
made use of it. Instead it used a GPIO called "xshutdown", with apprently
wrong polarity.

Fix this by requesting "reset" GPIO with the right polarity first, and if
that fails, then request "xshutdown" GPIO with the old polarity. This way
it works for new users as expected while if someone, somewhere, depended
on "xshutdown" GPIO, that continues to work as well.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/ccs/ccs-core.c | 14 ++++++++++++--
 drivers/media/i2c/ccs/ccs.h      |  1 +
 2 files changed, 13 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index bddfee637f33..69e7990c65f3 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -1295,6 +1295,7 @@  static int ccs_power_on(struct device *dev)
 	}
 	usleep_range(1000, 1000);
 
+	gpiod_set_value(sensor->reset, 0);
 	gpiod_set_value(sensor->xshutdown, 1);
 
 	sleep = SMIAPP_RESET_DELAY(sensor->hwcfg->ext_clk);
@@ -1381,6 +1382,7 @@  static int ccs_power_on(struct device *dev)
 	return 0;
 
 out_cci_addr_fail:
+	gpiod_set_value(sensor->reset, 1);
 	gpiod_set_value(sensor->xshutdown, 0);
 	clk_disable_unprepare(sensor->ext_clk);
 
@@ -1407,6 +1409,7 @@  static int ccs_power_off(struct device *dev)
 	if (sensor->hwcfg->i2c_addr_alt)
 		ccs_write(sensor, SOFTWARE_RESET, CCS_SOFTWARE_RESET_ON);
 
+	gpiod_set_value(sensor->reset, 1);
 	gpiod_set_value(sensor->xshutdown, 0);
 	clk_disable_unprepare(sensor->ext_clk);
 	usleep_range(5000, 5000);
@@ -3008,8 +3011,15 @@  static int ccs_probe(struct i2c_client *client)
 		return -EINVAL;
 	}
 
-	sensor->xshutdown = devm_gpiod_get_optional(&client->dev, "xshutdown",
-						    GPIOD_OUT_LOW);
+	sensor->reset = devm_gpiod_get_optional(&client->dev, "reset",
+						GPIOD_OUT_HIGH);
+	if (IS_ERR(sensor->reset))
+		return PTR_ERR(sensor->reset);
+	/* Support old users that may have used "xshutdown" property. */
+	if (!sensor->reset)
+		sensor->xshutdown = devm_gpiod_get_optional(&client->dev,
+							    "xshutdown",
+							    GPIOD_OUT_LOW);
 	if (IS_ERR(sensor->xshutdown))
 		return PTR_ERR(sensor->xshutdown);
 
diff --git a/drivers/media/i2c/ccs/ccs.h b/drivers/media/i2c/ccs/ccs.h
index 8933f3d40fa5..bfe39e02f5e9 100644
--- a/drivers/media/i2c/ccs/ccs.h
+++ b/drivers/media/i2c/ccs/ccs.h
@@ -219,6 +219,7 @@  struct ccs_sensor {
 	struct regulator *vana;
 	struct clk *ext_clk;
 	struct gpio_desc *xshutdown;
+	struct gpio_desc *reset;
 	void *ccs_limits;
 	u8 nbinning_subtypes;
 	struct ccs_binning_subtype binning_subtypes[CCS_LIM_BINNING_SUB_TYPE_MAX_N + 1];