@@ -20,6 +20,16 @@
#define CCS_PLL_FLAG_OP_PIX_CLOCK_PER_LANE (1 << 0)
#define CCS_PLL_FLAG_NO_OP_CLOCKS (1 << 1)
+/**
+ * struct ccs_pll_branch_fr - CCS PLL configuration (front)
+ *
+ * A single branch front-end of the CCS PLL tree.
+ *
+ * @pre_pll_clk_div: Pre-PLL clock divisor
+ * @pll_multiplier: PLL multiplier
+ * @pll_ip_clk_freq_hz: PLL input clock frequency
+ * @pll_op_clk_freq_hz: PLL output clock frequency
+ */
struct ccs_pll_branch_fr {
uint16_t pre_pll_clk_div;
uint16_t pll_multiplier;
@@ -27,6 +37,16 @@ struct ccs_pll_branch_fr {
uint32_t pll_op_clk_freq_hz;
};
+/**
+ * struct ccs_pll_branch_bk - CCS PLL configuration (back)
+ *
+ * A single branch back-end of the CCS PLL tree.
+ *
+ * @sys_clk_div: System clock divider
+ * @pix_clk_div: Pixel clock divider
+ * @sys_clk_freq_hz: System clock frequency
+ * @pix_clk_freq_hz: Pixel clock frequency
+ */
struct ccs_pll_branch_bk {
uint16_t sys_clk_div;
uint16_t pix_clk_div;
@@ -34,6 +54,30 @@ struct ccs_pll_branch_bk {
uint32_t pix_clk_freq_hz;
};
+/**
+ * struct ccs_pll - Full CCS PLL configuration
+ *
+ * All information required to calculate CCS PLL configuration.
+ *
+ * @bus_type: Type of the data bus, CCS_PLL_BUS_TYPE_* (input)
+ * @csi2: CSI-2 related parameters
+ * @csi2.lanes: The number of the CSI-2 data lanes (input)
+ * @binning_vertical: Vertical binning factor (input)
+ * @binning_horizontal: Horizontal binning factor (input)
+ * @scale_m: Downscaling factor, M component, [16, max] (input)
+ * @scale_n: Downscaling factor, N component, typically 16 (input)
+ * @bits_per_pixel: Bits per pixel on the output data bus (input)
+ * @flags: CCS_PLL_FLAG_* (input)
+ * @link_freq: Chosen link frequency (input)
+ * @ext_clk_freq_hz: External clock frequency, i.e. the sensor's input clock
+ * (input)
+ * @vt_fr: Video timing front-end configuration (output)
+ * @vt_bk: Video timing back-end configuration (output)
+ * @op_bk: Operational timing back-end configuration (output)
+ * @pixel_rate_csi: Pixel rate on the output data bus (output)
+ * @pixel_rate_pixel_array: Nominal pixel rate in the sensor's pixel array
+ * (output)
+ */
struct ccs_pll {
/* input values */
uint8_t bus_type;
@@ -58,6 +102,18 @@ struct ccs_pll {
uint32_t pixel_rate_pixel_array;
};
+/**
+ * struct ccs_pll_branch_limits_fr - CCS PLL front-end limits
+ *
+ * @min_pre_pll_clk_div: Minimum pre-PLL clock divider
+ * @max_pre_pll_clk_div: Maximum pre-PLL clock divider
+ * @min_pll_ip_clk_freq_hz: Minimum PLL input clock frequency
+ * @max_pll_ip_clk_freq_hz: Maximum PLL input clock frequency
+ * @min_pll_multiplier: Minimum PLL multiplier
+ * @max_pll_multiplier: Maximum PLL multiplier
+ * @min_pll_op_clk_freq_hz: Minimum PLL output clock frequency
+ * @max_pll_op_clk_freq_hz: Maximum PLL output clock frequency
+ */
struct ccs_pll_branch_limits_fr {
uint16_t min_pre_pll_clk_div;
uint16_t max_pre_pll_clk_div;
@@ -69,6 +125,18 @@ struct ccs_pll_branch_limits_fr {
uint32_t max_pll_op_clk_freq_hz;
};
+/**
+ * struct ccs_pll_branch_limits_bk - CCS PLL back-end limits
+ *
+ * @min_sys_clk_div: Minimum system clock divider
+ * @max_sys_clk_div: Maximum system clock divider
+ * @min_sys_clk_freq_hz: Minimum system clock frequency
+ * @max_sys_clk_freq_hz: Maximum system clock frequency
+ * @min_pix_clk_div: Minimum pixel clock divider
+ * @max_pix_clk_div: Maximum pixel clock divider
+ * @min_pix_clk_freq_hz: Minimum pixel clock frequency
+ * @max_pix_clk_freq_hz: Maximum pixel clock frequency
+ */
struct ccs_pll_branch_limits_bk {
uint16_t min_sys_clk_div;
uint16_t max_sys_clk_div;
@@ -80,6 +148,17 @@ struct ccs_pll_branch_limits_bk {
uint32_t max_pix_clk_freq_hz;
};
+/**
+ * struct ccs_pll_limits - CCS PLL limits
+ *
+ * @min_ext_clk_freq_hz: Minimum external clock frequency
+ * @max_ext_clk_freq_hz: Maximum external clock frequency
+ * @vt_fr: Video timing front-end limits
+ * @vt_bk: Video timing back-end limits
+ * @op_bk: Operational timing back-end limits
+ * @min_line_length_pck_bin: Minimum line length in pixels, with binning
+ * @min_line_length_pck: Minimum line length in pixels without binning
+ */
struct ccs_pll_limits {
/* Strict PLL limits */
uint32_t min_ext_clk_freq_hz;
@@ -96,6 +175,16 @@ struct ccs_pll_limits {
struct device;
+/**
+ * ccs_pll_calculate - Calculate CCS PLL configuration based on input parameters
+ *
+ * @dev: Device pointer, used for printing messages
+ * @limits: Limits specific to the sensor
+ * @pll: Given PLL configuration
+ *
+ * Calculate the CCS PLL configuration based on the limits as well as given
+ * device specific, system specific or user configured input data.
+ */
int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *limits,
struct ccs_pll *pll);
The CCS pll is used by the CCS driver at the moment, but documenting the interface makes sense. It's non-trivial and the calculator could be used elsewhere. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> --- drivers/media/i2c/ccs-pll.h | 89 +++++++++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+)