diff mbox series

[v2,02/15] drm/vc4: hdmi: Move hdmi reset to bind

Message ID 20210111142309.193441-3-maxime@cerno.tech (mailing list archive)
State New, archived
Headers show
Series drm/vc4: hdmi: Add CEC support for the BCM2711 | expand

Commit Message

Maxime Ripard Jan. 11, 2021, 2:22 p.m. UTC 
From: Dom Cobley <popcornmix@gmail.com>

The hdmi reset got moved to a later point in the commit 9045e91a476b
("drm/vc4: hdmi: Add reset callback").

However, the reset now occurs after vc4_hdmi_cec_init and so tramples
the setup of registers like HDMI_CEC_CNTRL_1

This only affects pi0-3 as on pi4 the cec registers are in a separate
block

Fixes: 9045e91a476b ("drm/vc4: hdmi: Add reset callback")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 2e5449b25ce4..cb4594e7df6f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -779,9 +779,6 @@  static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 		return;
 	}
 
-	if (vc4_hdmi->variant->reset)
-		vc4_hdmi->variant->reset(vc4_hdmi);
-
 	if (vc4_hdmi->variant->phy_init)
 		vc4_hdmi->variant->phy_init(vc4_hdmi, vc4_conn_state);
 
@@ -1874,6 +1871,9 @@  static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	vc4_hdmi->disable_wifi_frequencies =
 		of_property_read_bool(dev->of_node, "wifi-2.4ghz-coexistence");
 
+	if (vc4_hdmi->variant->reset)
+		vc4_hdmi->variant->reset(vc4_hdmi);
+
 	pm_runtime_enable(dev);
 
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);