diff mbox series

[v2,15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding

Message ID 20210120134357.1522254-15-robert.foss@linaro.org (mailing list archive)
State New, archived
Headers show
Series [v2,01/22] media: camss: Fix vfe_isr_comp_done() documentation | expand

Commit Message

Robert Foss Jan. 20, 2021, 1:43 p.m. UTC
Add bindings for qcom,sdm660-camss in order to support the camera
subsystem on SDM630/660 and SDA variants.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---

Changes since v1:
 - Laurent: Reworked driver to use dtschema


 .../bindings/media/qcom,sdm660-camss.yaml     | 416 ++++++++++++++++++
 1 file changed, 416 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml

Comments

Robert Foss Jan. 21, 2021, 10:35 a.m. UTC | #1
Due to the dt-bindings supporting sdm660-camss, this patch depends
the sdm660 clock driver being upstreamed.

SDM630/660 Multimedia and GPU clock controllers
https://lkml.org/lkml/2020/9/26/166

On Wed, 20 Jan 2021 at 14:44, Robert Foss <robert.foss@linaro.org> wrote:
>
> Add bindings for qcom,sdm660-camss in order to support the camera
> subsystem on SDM630/660 and SDA variants.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>
> Changes since v1:
>  - Laurent: Reworked driver to use dtschema
>
>
>  .../bindings/media/qcom,sdm660-camss.yaml     | 416 ++++++++++++++++++
>  1 file changed, 416 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> new file mode 100644
> index 000000000000..105ce84f9b71
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> @@ -0,0 +1,416 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm CAMSS ISP
> +
> +maintainers:
> +  - Robert Foss <robert.foss@linaro.org>
> +  - Todor Tomov <todor.too@gmail.com>
> +
> +description: |
> +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> +  compatible:
> +    const: qcom,sdm660-camss
> +
> +  clocks:
> +    description:
> +      Input clocks for the hardware block.
> +    minItems: 42
> +    maxItems: 42
> +
> +  clock-names:
> +    description:
> +      Names of input clocks for the hardware block.
> +    items:
> +      - const: ahb
> +      - const: cphy_csid0
> +      - const: cphy_csid1
> +      - const: cphy_csid2
> +      - const: cphy_csid3
> +      - const: csi0_ahb
> +      - const: csi0
> +      - const: csi0_phy
> +      - const: csi0_pix
> +      - const: csi0_rdi
> +      - const: csi1_ahb
> +      - const: csi1
> +      - const: csi1_phy
> +      - const: csi1_pix
> +      - const: csi1_rdi
> +      - const: csi2_ahb
> +      - const: csi2
> +      - const: csi2_phy
> +      - const: csi2_pix
> +      - const: csi2_rdi
> +      - const: csi3_ahb
> +      - const: csi3
> +      - const: csi3_phy
> +      - const: csi3_pix
> +      - const: csi3_rdi
> +      - const: csiphy0_timer
> +      - const: csiphy1_timer
> +      - const: csiphy2_timer
> +      - const: csiphy_ahb2crif
> +      - const: csi_vfe0
> +      - const: csi_vfe1
> +      - const: ispif_ahb
> +      - const: throttle_axi
> +      - const: top_ahb
> +      - const: vfe0_ahb
> +      - const: vfe0
> +      - const: vfe0_stream
> +      - const: vfe1_ahb
> +      - const: vfe1
> +      - const: vfe1_stream
> +      - const: vfe_ahb
> +      - const: vfe_axi
> +
> +  interrupts:
> +    description:
> +      IRQs for the hardware block.
> +    minItems: 10
> +    maxItems: 10
> +
> +  interrupt-names:
> +    description:
> +      Names of IRQs for the hardware block.
> +    items:
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csid3
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: ispif
> +      - const: vfe0
> +      - const: vfe1
> +
> +  iommus:
> +    maxItems: 4
> +
> +  power-domains:
> +    maxItems: 2
> +
> +  ports:
> +    description:
> +      The CSI data input ports.
> +
> +    type: object
> +
> +    properties:
> +      port@0:
> +        type: object
> +        description: Input node for receiving CSI data.
> +        properties:
> +          endpoint:
> +            type: object
> +
> +            properties:
> +              clock-lanes:
> +                description: |-
> +                  The physical clock lane index.
> +
> +              data-lanes:
> +                description: |-
> +                  An array of physical data lanes indexes.
> +                  Position of an entry determines the logical
> +                  lane number, while the value of an entry
> +                  indicates physical lane index.
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +        required:
> +          - endpoint
> +          - reg
> +
> +      port@1:
> +        type: object
> +        description: Input node for receiving CSI data.
> +        properties:
> +          endpoint:
> +            type: object
> +
> +            properties:
> +              clock-lanes:
> +                description: |-
> +                  The physical clock lane index.
> +
> +              data-lanes:
> +                description: |-
> +                  An array of physical data lanes indexes.
> +                  Position of an entry determines the logical
> +                  lane number, while the value of an entry
> +                  indicates physical lane index.
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +        required:
> +          - endpoint
> +          - reg
> +
> +      port@2:
> +        type: object
> +        description: Input node for receiving CSI data.
> +        properties:
> +          endpoint:
> +            type: object
> +
> +            properties:
> +              clock-lanes:
> +                description: |-
> +                  The physical clock lane index.
> +
> +              data-lanes:
> +                description: |-
> +                  An array of physical data lanes indexes.
> +                  Position of an entry determines the logical
> +                  lane number, while the value of an entry
> +                  indicates physical lane index.
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +        required:
> +          - endpoint
> +          - reg
> +
> +      port@3:
> +        type: object
> +        description: Input node for receiving CSI data.
> +        properties:
> +          endpoint:
> +            type: object
> +
> +            properties:
> +              clock-lanes:
> +                description: |-
> +                  The physical clock lane index.
> +
> +              data-lanes:
> +                description: |-
> +                  An array of physical data lanes indexes.
> +                  Position of an entry determines the logical
> +                  lane number, while the value of an entry
> +                  indicates physical lane index.
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +        required:
> +          - endpoint
> +          - reg
> +
> +  reg:
> +    minItems: 14
> +    maxItems: 14
> +
> +  reg-names:
> +    items:
> +      - const: csi_clk_mux
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csid3
> +      - const: csiphy0
> +      - const: csiphy0_clk_mux
> +      - const: csiphy1
> +      - const: csiphy1_clk_mux
> +      - const: csiphy2
> +      - const: csiphy2_clk_mux
> +      - const: ispif
> +      - const: vfe0
> +      - const: vfe1
> +
> +  vdda-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.
> +
> +required:
> +  - clock-names
> +  - clocks
> +  - compatible
> +  - interrupt-names
> +  - interrupts
> +  - iommus
> +  - power-domains
> +  - reg
> +  - reg-names
> +  - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
> +    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
> +
> +    camss: camss@ca00000 {
> +      compatible = "qcom,sdm660-camss";
> +
> +      clocks = <&mmcc CAMSS_AHB_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID0_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID1_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID2_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID3_CLK>,
> +        <&mmcc CAMSS_CSI0_AHB_CLK>,
> +        <&mmcc CAMSS_CSI0_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID0_CLK>,
> +        <&mmcc CAMSS_CSI0PIX_CLK>,
> +        <&mmcc CAMSS_CSI0RDI_CLK>,
> +        <&mmcc CAMSS_CSI1_AHB_CLK>,
> +        <&mmcc CAMSS_CSI1_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID1_CLK>,
> +        <&mmcc CAMSS_CSI1PIX_CLK>,
> +        <&mmcc CAMSS_CSI1RDI_CLK>,
> +        <&mmcc CAMSS_CSI2_AHB_CLK>,
> +        <&mmcc CAMSS_CSI2_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID2_CLK>,
> +        <&mmcc CAMSS_CSI2PIX_CLK>,
> +        <&mmcc CAMSS_CSI2RDI_CLK>,
> +        <&mmcc CAMSS_CSI3_AHB_CLK>,
> +        <&mmcc CAMSS_CSI3_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID3_CLK>,
> +        <&mmcc CAMSS_CSI3PIX_CLK>,
> +        <&mmcc CAMSS_CSI3RDI_CLK>,
> +        <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
> +        <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
> +        <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
> +        <&mmcc CSIPHY_AHB2CRIF_CLK>,
> +        <&mmcc CAMSS_CSI_VFE0_CLK>,
> +        <&mmcc CAMSS_CSI_VFE1_CLK>,
> +        <&mmcc CAMSS_ISPIF_AHB_CLK>,
> +        <&mmcc THROTTLE_CAMSS_AXI_CLK>,
> +        <&mmcc CAMSS_TOP_AHB_CLK>,
> +        <&mmcc CAMSS_VFE0_AHB_CLK>,
> +        <&mmcc CAMSS_VFE0_CLK>,
> +        <&mmcc CAMSS_VFE0_STREAM_CLK>,
> +        <&mmcc CAMSS_VFE1_AHB_CLK>,
> +        <&mmcc CAMSS_VFE1_CLK>,
> +        <&mmcc CAMSS_VFE1_STREAM_CLK>,
> +        <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
> +        <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
> +
> +      clock-names = "ahb",
> +        "cphy_csid0",
> +        "cphy_csid1",
> +        "cphy_csid2",
> +        "cphy_csid3",
> +        "csi0_ahb",
> +        "csi0",
> +        "csi0_phy",
> +        "csi0_pix",
> +        "csi0_rdi",
> +        "csi1_ahb",
> +        "csi1",
> +        "csi1_phy",
> +        "csi1_pix",
> +        "csi1_rdi",
> +        "csi2_ahb",
> +        "csi2",
> +        "csi2_phy",
> +        "csi2_pix",
> +        "csi2_rdi",
> +        "csi3_ahb",
> +        "csi3",
> +        "csi3_phy",
> +        "csi3_pix",
> +        "csi3_rdi",
> +        "csiphy0_timer",
> +        "csiphy1_timer",
> +        "csiphy2_timer",
> +        "csiphy_ahb2crif",
> +        "csi_vfe0",
> +        "csi_vfe1",
> +        "ispif_ahb",
> +        "throttle_axi",
> +        "top_ahb",
> +        "vfe0_ahb",
> +        "vfe0",
> +        "vfe0_stream",
> +        "vfe1_ahb",
> +        "vfe1",
> +        "vfe1_stream",
> +        "vfe_ahb",
> +        "vfe_axi";
> +
> +      interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
> +
> +      interrupt-names = "csid0",
> +        "csid1",
> +        "csid2",
> +        "csid3",
> +        "csiphy0",
> +        "csiphy1",
> +        "csiphy2",
> +        "ispif",
> +        "vfe0",
> +        "vfe1";
> +
> +      iommus = <&mmss_smmu 0xc00>,
> +        <&mmss_smmu 0xc01>,
> +        <&mmss_smmu 0xc02>,
> +        <&mmss_smmu 0xc03>;
> +
> +      power-domains = <&mmcc CAMSS_VFE0_GDSC>,
> +        <&mmcc CAMSS_VFE1_GDSC>;
> +
> +      reg = <0x0ca00020 0x10>,
> +        <0x0ca30000 0x100>,
> +        <0x0ca30400 0x100>,
> +        <0x0ca30800 0x100>,
> +        <0x0ca30c00 0x100>,
> +        <0x0c824000 0x1000>,
> +        <0x0ca00120 0x4>,
> +        <0x0c825000 0x1000>,
> +        <0x0ca00124 0x4>,
> +        <0x0c826000 0x1000>,
> +        <0x0ca00128 0x4>,
> +        <0x0ca31000 0x500>,
> +        <0x0ca10000 0x1000>,
> +        <0x0ca14000 0x1000>;
> +
> +      reg-names = "csi_clk_mux",
> +        "csid0",
> +        "csid1",
> +        "csid2",
> +        "csid3",
> +        "csiphy0",
> +        "csiphy0_clk_mux",
> +        "csiphy1",
> +        "csiphy1_clk_mux",
> +        "csiphy2",
> +        "csiphy2_clk_mux",
> +        "ispif",
> +        "vfe0",
> +        "vfe1";
> +
> +      vdda-supply = <&reg_2v8>;
> +
> +      ports {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +      };
> +    };
> --
> 2.27.0
>
Robert Foss Jan. 21, 2021, 10:40 a.m. UTC | #2
Hey Angelo,

On Wed, 20 Jan 2021 at 17:17, AngeloGioacchino Del Regno
<kholk11@gmail.com> wrote:
>
> Il giorno mer 20 gen 2021 alle ore 14:44 Robert Foss
> <robert.foss@linaro.org> ha scritto:
> >
> > Add bindings for qcom,sdm660-camss in order to support the camera
> > subsystem on SDM630/660 and SDA variants.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
>
> Hey Robert!
>
> > ---
> >
> > Changes since v1:
> >  - Laurent: Reworked driver to use dtschema
> >
> >
> >  .../bindings/media/qcom,sdm660-camss.yaml     | 416 ++++++++++++++++++
> >  1 file changed, 416 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> > new file mode 100644
> > index 000000000000..105ce84f9b71
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> > @@ -0,0 +1,416 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm CAMSS ISP
> > +
> > +maintainers:
>
> If you want, feel free to add me to the maintainers list for SDM660 CAMSS
> - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

Alright, I'll add you right away :)

>
> > +  - Robert Foss <robert.foss@linaro.org>
> > +  - Todor Tomov <todor.too@gmail.com>
> > +
> > +description: |
> > +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,sdm660-camss
> > +
> > +  clocks:
> > +    description:
> > +      Input clocks for the hardware block.
> > +    minItems: 42
> > +    maxItems: 42
> > +
> > +  clock-names:
> > +    description:
> > +      Names of input clocks for the hardware block.
> > +    items:
> > +      - const: ahb
> > +      - const: cphy_csid0
> > +      - const: cphy_csid1
> > +      - const: cphy_csid2
> > +      - const: cphy_csid3
> > +      - const: csi0_ahb
> > +      - const: csi0
> > +      - const: csi0_phy
> > +      - const: csi0_pix
> > +      - const: csi0_rdi
> > +      - const: csi1_ahb
> > +      - const: csi1
> > +      - const: csi1_phy
> > +      - const: csi1_pix
> > +      - const: csi1_rdi
> > +      - const: csi2_ahb
> > +      - const: csi2
> > +      - const: csi2_phy
> > +      - const: csi2_pix
> > +      - const: csi2_rdi
> > +      - const: csi3_ahb
> > +      - const: csi3
> > +      - const: csi3_phy
> > +      - const: csi3_pix
> > +      - const: csi3_rdi
> > +      - const: csiphy0_timer
> > +      - const: csiphy1_timer
> > +      - const: csiphy2_timer
> > +      - const: csiphy_ahb2crif
> > +      - const: csi_vfe0
> > +      - const: csi_vfe1
> > +      - const: ispif_ahb
> > +      - const: throttle_axi
> > +      - const: top_ahb
> > +      - const: vfe0_ahb
> > +      - const: vfe0
> > +      - const: vfe0_stream
> > +      - const: vfe1_ahb
> > +      - const: vfe1
> > +      - const: vfe1_stream
> > +      - const: vfe_ahb
> > +      - const: vfe_axi
> > +
> > +  interrupts:
> > +    description:
> > +      IRQs for the hardware block.
> > +    minItems: 10
> > +    maxItems: 10
> > +
> > +  interrupt-names:
> > +    description:
> > +      Names of IRQs for the hardware block.
> > +    items:
> > +      - const: csid0
> > +      - const: csid1
> > +      - const: csid2
> > +      - const: csid3
> > +      - const: csiphy0
> > +      - const: csiphy1
> > +      - const: csiphy2
> > +      - const: ispif
> > +      - const: vfe0
> > +      - const: vfe1
> > +
> > +  iommus:
> > +    maxItems: 4
> > +
> > +  power-domains:
> > +    maxItems: 2
> > +
> > +  ports:
> > +    description:
> > +      The CSI data input ports.
> > +
> > +    type: object
> > +
> > +    properties:
> > +      port@0:
> > +        type: object
> > +        description: Input node for receiving CSI data.
> > +        properties:
> > +          endpoint:
> > +            type: object
> > +
> > +            properties:
> > +              clock-lanes:
> > +                description: |-
> > +                  The physical clock lane index.
> > +
> > +              data-lanes:
> > +                description: |-
> > +                  An array of physical data lanes indexes.
> > +                  Position of an entry determines the logical
> > +                  lane number, while the value of an entry
> > +                  indicates physical lane index.
> > +
> > +            required:
> > +              - clock-lanes
> > +              - data-lanes
> > +
> > +        required:
> > +          - endpoint
> > +          - reg
> > +
> > +      port@1:
> > +        type: object
> > +        description: Input node for receiving CSI data.
> > +        properties:
> > +          endpoint:
> > +            type: object
> > +
> > +            properties:
> > +              clock-lanes:
> > +                description: |-
> > +                  The physical clock lane index.
> > +
> > +              data-lanes:
> > +                description: |-
> > +                  An array of physical data lanes indexes.
> > +                  Position of an entry determines the logical
> > +                  lane number, while the value of an entry
> > +                  indicates physical lane index.
> > +
> > +            required:
> > +              - clock-lanes
> > +              - data-lanes
> > +
> > +        required:
> > +          - endpoint
> > +          - reg
> > +
> > +      port@2:
> > +        type: object
> > +        description: Input node for receiving CSI data.
> > +        properties:
> > +          endpoint:
> > +            type: object
> > +
> > +            properties:
> > +              clock-lanes:
> > +                description: |-
> > +                  The physical clock lane index.
> > +
> > +              data-lanes:
> > +                description: |-
> > +                  An array of physical data lanes indexes.
> > +                  Position of an entry determines the logical
> > +                  lane number, while the value of an entry
> > +                  indicates physical lane index.
> > +
> > +            required:
> > +              - clock-lanes
> > +              - data-lanes
> > +
> > +        required:
> > +          - endpoint
> > +          - reg
> > +
> > +      port@3:
> > +        type: object
> > +        description: Input node for receiving CSI data.
> > +        properties:
> > +          endpoint:
> > +            type: object
> > +
> > +            properties:
> > +              clock-lanes:
> > +                description: |-
> > +                  The physical clock lane index.
> > +
> > +              data-lanes:
> > +                description: |-
> > +                  An array of physical data lanes indexes.
> > +                  Position of an entry determines the logical
> > +                  lane number, while the value of an entry
> > +                  indicates physical lane index.
> > +
> > +            required:
> > +              - clock-lanes
> > +              - data-lanes
> > +
> > +        required:
> > +          - endpoint
> > +          - reg
> > +
> > +  reg:
> > +    minItems: 14
> > +    maxItems: 14
> > +
> > +  reg-names:
> > +    items:
> > +      - const: csi_clk_mux
> > +      - const: csid0
> > +      - const: csid1
> > +      - const: csid2
> > +      - const: csid3
> > +      - const: csiphy0
> > +      - const: csiphy0_clk_mux
> > +      - const: csiphy1
> > +      - const: csiphy1_clk_mux
> > +      - const: csiphy2
> > +      - const: csiphy2_clk_mux
> > +      - const: ispif
> > +      - const: vfe0
> > +      - const: vfe1
> > +
> > +  vdda-supply:
> > +    description:
> > +      Definition of the regulator used as analog power supply.
> > +
> > +required:
> > +  - clock-names
> > +  - clocks
> > +  - compatible
> > +  - interrupt-names
> > +  - interrupts
> > +  - iommus
> > +  - power-domains
> > +  - reg
> > +  - reg-names
> > +  - vdda-supply
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
> > +    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
> > +
> > +    camss: camss@ca00000 {
> > +      compatible = "qcom,sdm660-camss";
> > +
> > +      clocks = <&mmcc CAMSS_AHB_CLK>,
> > +        <&mmcc CAMSS_CPHY_CSID0_CLK>,
> > +        <&mmcc CAMSS_CPHY_CSID1_CLK>,
> > +        <&mmcc CAMSS_CPHY_CSID2_CLK>,
> > +        <&mmcc CAMSS_CPHY_CSID3_CLK>,
> > +        <&mmcc CAMSS_CSI0_AHB_CLK>,
> > +        <&mmcc CAMSS_CSI0_CLK>,
> > +        <&mmcc CAMSS_CPHY_CSID0_CLK>,
> > +        <&mmcc CAMSS_CSI0PIX_CLK>,
> > +        <&mmcc CAMSS_CSI0RDI_CLK>,
> > +        <&mmcc CAMSS_CSI1_AHB_CLK>,
> > +        <&mmcc CAMSS_CSI1_CLK>,
> > +        <&mmcc CAMSS_CPHY_CSID1_CLK>,
> > +        <&mmcc CAMSS_CSI1PIX_CLK>,
> > +        <&mmcc CAMSS_CSI1RDI_CLK>,
> > +        <&mmcc CAMSS_CSI2_AHB_CLK>,
> > +        <&mmcc CAMSS_CSI2_CLK>,
> > +        <&mmcc CAMSS_CPHY_CSID2_CLK>,
> > +        <&mmcc CAMSS_CSI2PIX_CLK>,
> > +        <&mmcc CAMSS_CSI2RDI_CLK>,
> > +        <&mmcc CAMSS_CSI3_AHB_CLK>,
> > +        <&mmcc CAMSS_CSI3_CLK>,
> > +        <&mmcc CAMSS_CPHY_CSID3_CLK>,
> > +        <&mmcc CAMSS_CSI3PIX_CLK>,
> > +        <&mmcc CAMSS_CSI3RDI_CLK>,
> > +        <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
> > +        <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
> > +        <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
> > +        <&mmcc CSIPHY_AHB2CRIF_CLK>,
> > +        <&mmcc CAMSS_CSI_VFE0_CLK>,
> > +        <&mmcc CAMSS_CSI_VFE1_CLK>,
> > +        <&mmcc CAMSS_ISPIF_AHB_CLK>,
> > +        <&mmcc THROTTLE_CAMSS_AXI_CLK>,
> > +        <&mmcc CAMSS_TOP_AHB_CLK>,
> > +        <&mmcc CAMSS_VFE0_AHB_CLK>,
> > +        <&mmcc CAMSS_VFE0_CLK>,
> > +        <&mmcc CAMSS_VFE0_STREAM_CLK>,
> > +        <&mmcc CAMSS_VFE1_AHB_CLK>,
> > +        <&mmcc CAMSS_VFE1_CLK>,
> > +        <&mmcc CAMSS_VFE1_STREAM_CLK>,
> > +        <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
> > +        <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
> > +
> > +      clock-names = "ahb",
> > +        "cphy_csid0",
> > +        "cphy_csid1",
> > +        "cphy_csid2",
> > +        "cphy_csid3",
> > +        "csi0_ahb",
> > +        "csi0",
> > +        "csi0_phy",
> > +        "csi0_pix",
> > +        "csi0_rdi",
> > +        "csi1_ahb",
> > +        "csi1",
> > +        "csi1_phy",
> > +        "csi1_pix",
> > +        "csi1_rdi",
> > +        "csi2_ahb",
> > +        "csi2",
> > +        "csi2_phy",
> > +        "csi2_pix",
> > +        "csi2_rdi",
> > +        "csi3_ahb",
> > +        "csi3",
> > +        "csi3_phy",
> > +        "csi3_pix",
> > +        "csi3_rdi",
> > +        "csiphy0_timer",
> > +        "csiphy1_timer",
> > +        "csiphy2_timer",
> > +        "csiphy_ahb2crif",
> > +        "csi_vfe0",
> > +        "csi_vfe1",
> > +        "ispif_ahb",
> > +        "throttle_axi",
> > +        "top_ahb",
> > +        "vfe0_ahb",
> > +        "vfe0",
> > +        "vfe0_stream",
> > +        "vfe1_ahb",
> > +        "vfe1",
> > +        "vfe1_stream",
> > +        "vfe_ahb",
> > +        "vfe_axi";
> > +
> > +      interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
> > +        <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
> > +        <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
> > +        <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
> > +        <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> > +        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> > +        <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
> > +        <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
> > +        <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
> > +        <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
> > +
> > +      interrupt-names = "csid0",
> > +        "csid1",
> > +        "csid2",
> > +        "csid3",
> > +        "csiphy0",
> > +        "csiphy1",
> > +        "csiphy2",
> > +        "ispif",
> > +        "vfe0",
> > +        "vfe1";
> > +
> > +      iommus = <&mmss_smmu 0xc00>,
> > +        <&mmss_smmu 0xc01>,
> > +        <&mmss_smmu 0xc02>,
> > +        <&mmss_smmu 0xc03>;
> > +
> > +      power-domains = <&mmcc CAMSS_VFE0_GDSC>,
> > +        <&mmcc CAMSS_VFE1_GDSC>;
> > +
> > +      reg = <0x0ca00020 0x10>,
> > +        <0x0ca30000 0x100>,
> > +        <0x0ca30400 0x100>,
> > +        <0x0ca30800 0x100>,
> > +        <0x0ca30c00 0x100>,
> > +        <0x0c824000 0x1000>,
> > +        <0x0ca00120 0x4>,
> > +        <0x0c825000 0x1000>,
> > +        <0x0ca00124 0x4>,
> > +        <0x0c826000 0x1000>,
> > +        <0x0ca00128 0x4>,
> > +        <0x0ca31000 0x500>,
> > +        <0x0ca10000 0x1000>,
> > +        <0x0ca14000 0x1000>;
> > +
> > +      reg-names = "csi_clk_mux",
> > +        "csid0",
> > +        "csid1",
> > +        "csid2",
> > +        "csid3",
> > +        "csiphy0",
> > +        "csiphy0_clk_mux",
> > +        "csiphy1",
> > +        "csiphy1_clk_mux",
> > +        "csiphy2",
> > +        "csiphy2_clk_mux",
> > +        "ispif",
> > +        "vfe0",
> > +        "vfe1";
> > +
> > +      vdda-supply = <&reg_2v8>;
> > +
> > +      ports {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +      };
> > +    };
> > --
> > 2.27.0
> >
Rob Herring (Arm) Jan. 21, 2021, 4:01 p.m. UTC | #3
On Wed, 20 Jan 2021 14:43:50 +0100, Robert Foss wrote:
> Add bindings for qcom,sdm660-camss in order to support the camera
> subsystem on SDM630/660 and SDA variants.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
> 
> Changes since v1:
>  - Laurent: Reworked driver to use dtschema
> 
> 
>  .../bindings/media/qcom,sdm660-camss.yaml     | 416 ++++++++++++++++++
>  1 file changed, 416 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,sdm660-camss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,mmcc-sdm660.h: No such file or directory
   21 |         #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:344: Documentation/devicetree/bindings/media/qcom,sdm660-camss.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1370: dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1429447

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring (Arm) Jan. 22, 2021, 4:34 p.m. UTC | #4
On Wed, Jan 20, 2021 at 02:43:50PM +0100, Robert Foss wrote:
> Add bindings for qcom,sdm660-camss in order to support the camera
> subsystem on SDM630/660 and SDA variants.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
> 
> Changes since v1:
>  - Laurent: Reworked driver to use dtschema

Same comments on this one.
Robert Foss Jan. 26, 2021, 3:51 p.m. UTC | #5
Thanks Rob!

On Fri, 22 Jan 2021 at 17:34, Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Jan 20, 2021 at 02:43:50PM +0100, Robert Foss wrote:
> > Add bindings for qcom,sdm660-camss in order to support the camera
> > subsystem on SDM630/660 and SDA variants.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> >
> > Changes since v1:
> >  - Laurent: Reworked driver to use dtschema
>
> Same comments on this one.

I applied the same feedback to msm8916, msm8996, sdm660 & sdm845
bindings in this series.
Thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
new file mode 100644
index 000000000000..105ce84f9b71
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -0,0 +1,416 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+  - Todor Tomov <todor.too@gmail.com>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm660-camss
+
+  clocks:
+    description:
+      Input clocks for the hardware block.
+    minItems: 42
+    maxItems: 42
+
+  clock-names:
+    description:
+      Names of input clocks for the hardware block.
+    items:
+      - const: ahb
+      - const: cphy_csid0
+      - const: cphy_csid1
+      - const: cphy_csid2
+      - const: cphy_csid3
+      - const: csi0_ahb
+      - const: csi0
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1_ahb
+      - const: csi1
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: csi2_ahb
+      - const: csi2
+      - const: csi2_phy
+      - const: csi2_pix
+      - const: csi2_rdi
+      - const: csi3_ahb
+      - const: csi3
+      - const: csi3_phy
+      - const: csi3_pix
+      - const: csi3_rdi
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csiphy2_timer
+      - const: csiphy_ahb2crif
+      - const: csi_vfe0
+      - const: csi_vfe1
+      - const: ispif_ahb
+      - const: throttle_axi
+      - const: top_ahb
+      - const: vfe0_ahb
+      - const: vfe0
+      - const: vfe0_stream
+      - const: vfe1_ahb
+      - const: vfe1
+      - const: vfe1_stream
+      - const: vfe_ahb
+      - const: vfe_axi
+
+  interrupts:
+    description:
+      IRQs for the hardware block.
+    minItems: 10
+    maxItems: 10
+
+  interrupt-names:
+    description:
+      Names of IRQs for the hardware block.
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 2
+
+  ports:
+    description:
+      The CSI data input ports.
+
+    type: object
+
+    properties:
+      port@0:
+        type: object
+        description: Input node for receiving CSI data.
+        properties:
+          endpoint:
+            type: object
+
+            properties:
+              clock-lanes:
+                description: |-
+                  The physical clock lane index.
+
+              data-lanes:
+                description: |-
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index.
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+        required:
+          - endpoint
+          - reg
+
+      port@1:
+        type: object
+        description: Input node for receiving CSI data.
+        properties:
+          endpoint:
+            type: object
+
+            properties:
+              clock-lanes:
+                description: |-
+                  The physical clock lane index.
+
+              data-lanes:
+                description: |-
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index.
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+        required:
+          - endpoint
+          - reg
+
+      port@2:
+        type: object
+        description: Input node for receiving CSI data.
+        properties:
+          endpoint:
+            type: object
+
+            properties:
+              clock-lanes:
+                description: |-
+                  The physical clock lane index.
+
+              data-lanes:
+                description: |-
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index.
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+        required:
+          - endpoint
+          - reg
+
+      port@3:
+        type: object
+        description: Input node for receiving CSI data.
+        properties:
+          endpoint:
+            type: object
+
+            properties:
+              clock-lanes:
+                description: |-
+                  The physical clock lane index.
+
+              data-lanes:
+                description: |-
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index.
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+        required:
+          - endpoint
+          - reg
+
+  reg:
+    minItems: 14
+    maxItems: 14
+
+  reg-names:
+    items:
+      - const: csi_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csiphy2
+      - const: csiphy2_clk_mux
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+
+    camss: camss@ca00000 {
+      compatible = "qcom,sdm660-camss";
+
+      clocks = <&mmcc CAMSS_AHB_CLK>,
+        <&mmcc CAMSS_CPHY_CSID0_CLK>,
+        <&mmcc CAMSS_CPHY_CSID1_CLK>,
+        <&mmcc CAMSS_CPHY_CSID2_CLK>,
+        <&mmcc CAMSS_CPHY_CSID3_CLK>,
+        <&mmcc CAMSS_CSI0_AHB_CLK>,
+        <&mmcc CAMSS_CSI0_CLK>,
+        <&mmcc CAMSS_CPHY_CSID0_CLK>,
+        <&mmcc CAMSS_CSI0PIX_CLK>,
+        <&mmcc CAMSS_CSI0RDI_CLK>,
+        <&mmcc CAMSS_CSI1_AHB_CLK>,
+        <&mmcc CAMSS_CSI1_CLK>,
+        <&mmcc CAMSS_CPHY_CSID1_CLK>,
+        <&mmcc CAMSS_CSI1PIX_CLK>,
+        <&mmcc CAMSS_CSI1RDI_CLK>,
+        <&mmcc CAMSS_CSI2_AHB_CLK>,
+        <&mmcc CAMSS_CSI2_CLK>,
+        <&mmcc CAMSS_CPHY_CSID2_CLK>,
+        <&mmcc CAMSS_CSI2PIX_CLK>,
+        <&mmcc CAMSS_CSI2RDI_CLK>,
+        <&mmcc CAMSS_CSI3_AHB_CLK>,
+        <&mmcc CAMSS_CSI3_CLK>,
+        <&mmcc CAMSS_CPHY_CSID3_CLK>,
+        <&mmcc CAMSS_CSI3PIX_CLK>,
+        <&mmcc CAMSS_CSI3RDI_CLK>,
+        <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+        <&mmcc CSIPHY_AHB2CRIF_CLK>,
+        <&mmcc CAMSS_CSI_VFE0_CLK>,
+        <&mmcc CAMSS_CSI_VFE1_CLK>,
+        <&mmcc CAMSS_ISPIF_AHB_CLK>,
+        <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+        <&mmcc CAMSS_TOP_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_CLK>,
+        <&mmcc CAMSS_VFE0_STREAM_CLK>,
+        <&mmcc CAMSS_VFE1_AHB_CLK>,
+        <&mmcc CAMSS_VFE1_CLK>,
+        <&mmcc CAMSS_VFE1_STREAM_CLK>,
+        <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+        <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
+
+      clock-names = "ahb",
+        "cphy_csid0",
+        "cphy_csid1",
+        "cphy_csid2",
+        "cphy_csid3",
+        "csi0_ahb",
+        "csi0",
+        "csi0_phy",
+        "csi0_pix",
+        "csi0_rdi",
+        "csi1_ahb",
+        "csi1",
+        "csi1_phy",
+        "csi1_pix",
+        "csi1_rdi",
+        "csi2_ahb",
+        "csi2",
+        "csi2_phy",
+        "csi2_pix",
+        "csi2_rdi",
+        "csi3_ahb",
+        "csi3",
+        "csi3_phy",
+        "csi3_pix",
+        "csi3_rdi",
+        "csiphy0_timer",
+        "csiphy1_timer",
+        "csiphy2_timer",
+        "csiphy_ahb2crif",
+        "csi_vfe0",
+        "csi_vfe1",
+        "ispif_ahb",
+        "throttle_axi",
+        "top_ahb",
+        "vfe0_ahb",
+        "vfe0",
+        "vfe0_stream",
+        "vfe1_ahb",
+        "vfe1",
+        "vfe1_stream",
+        "vfe_ahb",
+        "vfe_axi";
+
+      interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+
+      interrupt-names = "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "csiphy0",
+        "csiphy1",
+        "csiphy2",
+        "ispif",
+        "vfe0",
+        "vfe1";
+
+      iommus = <&mmss_smmu 0xc00>,
+        <&mmss_smmu 0xc01>,
+        <&mmss_smmu 0xc02>,
+        <&mmss_smmu 0xc03>;
+
+      power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+        <&mmcc CAMSS_VFE1_GDSC>;
+
+      reg = <0x0ca00020 0x10>,
+        <0x0ca30000 0x100>,
+        <0x0ca30400 0x100>,
+        <0x0ca30800 0x100>,
+        <0x0ca30c00 0x100>,
+        <0x0c824000 0x1000>,
+        <0x0ca00120 0x4>,
+        <0x0c825000 0x1000>,
+        <0x0ca00124 0x4>,
+        <0x0c826000 0x1000>,
+        <0x0ca00128 0x4>,
+        <0x0ca31000 0x500>,
+        <0x0ca10000 0x1000>,
+        <0x0ca14000 0x1000>;
+
+      reg-names = "csi_clk_mux",
+        "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "csiphy0",
+        "csiphy0_clk_mux",
+        "csiphy1",
+        "csiphy1_clk_mux",
+        "csiphy2",
+        "csiphy2_clk_mux",
+        "ispif",
+        "vfe0",
+        "vfe1";
+
+      vdda-supply = <&reg_2v8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };