@@ -86,8 +86,7 @@ static int vidioc_decoder_cmd(struct file *file, void *priv,
mtk_v4l2_debug(1, "Capture stream is off. No need to flush.");
return 0;
}
- v4l2_m2m_buf_queue(ctx->m2m_ctx,
- &ctx->empty_flush_buf->m2m_buf.vb);
+ v4l2_m2m_buf_queue(ctx->m2m_ctx, &ctx->empty_flush_buf.vb);
v4l2_m2m_try_schedule(ctx->m2m_ctx);
break;
@@ -779,8 +778,6 @@ int vb2ops_vdec_buf_init(struct vb2_buffer *vb)
if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
buf->used = false;
buf->queued_in_v4l2 = false;
- } else {
- buf->lastframe = false;
}
return 0;
@@ -807,9 +804,7 @@ void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
- struct mtk_video_dec_buf *buf_info = container_of(
- src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
- if (!buf_info->lastframe) {
+ if (src_buf != &ctx->empty_flush_buf.vb) {
struct media_request *req =
src_buf->vb2_buf.req_obj.req;
v4l2_m2m_buf_done(src_buf,
@@ -42,7 +42,6 @@ struct vdec_fb {
* @queued_in_vb2: Capture buffer is queue in vb2
* @queued_in_v4l2: Capture buffer is in v4l2 driver, but not in vb2
* queue yet
- * @lastframe: Intput buffer is last buffer - EOS
* @error: An unrecoverable error occurs on this buffer.
* @frame_buffer: Decode status, and buffer information of Capture buffer
* @bs_buffer: Output buffer info
@@ -55,7 +54,6 @@ struct mtk_video_dec_buf {
bool used;
bool queued_in_vb2;
bool queued_in_v4l2;
- bool lastframe;
bool error;
@@ -82,21 +82,14 @@ static int fops_vcodec_open(struct file *file)
{
struct mtk_vcodec_dev *dev = video_drvdata(file);
struct mtk_vcodec_ctx *ctx = NULL;
- struct mtk_video_dec_buf *mtk_buf = NULL;
int ret = 0;
struct vb2_queue *src_vq;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
- mtk_buf = kzalloc(sizeof(*mtk_buf), GFP_KERNEL);
- if (!mtk_buf) {
- kfree(ctx);
- return -ENOMEM;
- }
mutex_lock(&dev->dev_mutex);
- ctx->empty_flush_buf = mtk_buf;
ctx->id = dev->id_counter++;
v4l2_fh_init(&ctx->fh, video_devdata(file));
file->private_data = &ctx->fh;
@@ -122,8 +115,7 @@ static int fops_vcodec_open(struct file *file)
}
src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
- ctx->empty_flush_buf->m2m_buf.vb.vb2_buf.vb2_queue = src_vq;
- ctx->empty_flush_buf->lastframe = true;
+ ctx->empty_flush_buf.vb.vb2_buf.vb2_queue = src_vq;
mtk_vcodec_dec_set_default_params(ctx);
if (v4l2_fh_is_singular(&ctx->fh)) {
@@ -161,7 +153,6 @@ static int fops_vcodec_open(struct file *file)
err_ctrls_setup:
v4l2_fh_del(&ctx->fh);
v4l2_fh_exit(&ctx->fh);
- kfree(ctx->empty_flush_buf);
kfree(ctx);
mutex_unlock(&dev->dev_mutex);
@@ -192,7 +183,6 @@ static int fops_vcodec_release(struct file *file)
v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
list_del_init(&ctx->list);
- kfree(ctx->empty_flush_buf);
kfree(ctx);
mutex_unlock(&dev->dev_mutex);
return 0;
@@ -337,8 +337,6 @@ static void mtk_vdec_worker(struct work_struct *work)
return;
}
- src_buf_info = container_of(src_buf, struct mtk_video_dec_buf,
- m2m_buf.vb);
dst_buf_info = container_of(dst_buf, struct mtk_video_dec_buf,
m2m_buf.vb);
@@ -359,7 +357,7 @@ static void mtk_vdec_worker(struct work_struct *work)
pfb->base_y.va, &pfb->base_y.dma_addr,
&pfb->base_c.dma_addr, pfb->base_y.size);
- if (src_buf_info->lastframe) {
+ if (src_buf == &ctx->empty_flush_buf.vb) {
mtk_v4l2_debug(1, "Got empty flush input buffer.");
src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
@@ -380,6 +378,10 @@ static void mtk_vdec_worker(struct work_struct *work)
v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
return;
}
+
+ src_buf_info = container_of(src_buf, struct mtk_video_dec_buf,
+ m2m_buf.vb);
+
buf.va = vb2_plane_vaddr(&src_buf->vb2_buf, 0);
buf.dma_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
buf.size = (size_t)src_buf->vb2_buf.planes[0].bytesused;
@@ -459,7 +461,6 @@ static void vb2ops_vdec_stateful_buf_queue(struct vb2_buffer *vb)
unsigned int dpbsize = 1, i = 0;
struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
struct vb2_v4l2_buffer *vb2_v4l2 = NULL;
- struct mtk_video_dec_buf *buf = NULL;
struct mtk_q_data *dst_q_data;
mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
@@ -469,6 +470,8 @@ static void vb2ops_vdec_stateful_buf_queue(struct vb2_buffer *vb)
* check if this buffer is ready to be used after decode
*/
if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+ struct mtk_video_dec_buf *buf;
+
vb2_v4l2 = to_vb2_v4l2_buffer(vb);
buf = container_of(vb2_v4l2, struct mtk_video_dec_buf,
m2m_buf.vb);
@@ -498,8 +501,8 @@ static void vb2ops_vdec_stateful_buf_queue(struct vb2_buffer *vb)
mtk_v4l2_err("No src buffer");
return;
}
- buf = container_of(src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
- if (buf->lastframe) {
+
+ if (src_buf == &ctx->empty_flush_buf.vb) {
/* This shouldn't happen. Just in case. */
mtk_v4l2_err("Invalid flush buffer.");
v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
@@ -13,6 +13,7 @@
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mem2mem.h>
#include <media/videobuf2-core.h>
#include "mtk_vcodec_util.h"
@@ -250,7 +251,8 @@ struct vdec_pic_info {
* @decode_work: worker for the decoding
* @encode_work: worker for the encoding
* @last_decoded_picinfo: pic information get from latest decode
- * @empty_flush_buf: a fake size-0 capture buffer that indicates flush
+ * @empty_flush_buf: a fake size-0 capture buffer that indicates flush. Only
+ * to be used with encoder and stateful decoder.
* @current_codec: current set input codec, in V4L2 pixel format
*
* @colorspace: enum v4l2_colorspace; supplemental to pixelformat
@@ -289,7 +291,7 @@ struct mtk_vcodec_ctx {
struct work_struct decode_work;
struct work_struct encode_work;
struct vdec_pic_info last_decoded_picinfo;
- struct mtk_video_dec_buf *empty_flush_buf;
+ struct v4l2_m2m_buffer empty_flush_buf;
u32 current_codec;
The flush buffer is a special buffer that tells the decoder driver to send an empty CAPTURE frame to the client with V4L2_BUF_FLAG_LAST set. We need similar functionality for the encoder ; however currently the flush buffer depends on decoder-specific structures and thus cannot be reused with the encoder. Fix this by testing for this buffer by its VB2 address, and not through a dedicated flag stored in a higher-level decoder structure. This also allows us to remove said flag and simplify the code a bit. Since the flush buffer should never be used in the stateless decoder, also add safeguards to check against it. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> --- .../media/platform/mtk-vcodec/mtk_vcodec_dec.c | 9 ++------- .../media/platform/mtk-vcodec/mtk_vcodec_dec.h | 2 -- .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 12 +----------- .../platform/mtk-vcodec/mtk_vcodec_dec_stateful.c | 15 +++++++++------ .../media/platform/mtk-vcodec/mtk_vcodec_drv.h | 6 ++++-- 5 files changed, 16 insertions(+), 28 deletions(-)