@@ -678,12 +678,13 @@ static void isc_set_histogram(struct isc_device *isc, bool enable)
struct isc_ctrls *ctrls = &isc->ctrls;
if (enable) {
- regmap_write(regmap, ISC_HIS_CFG,
+ regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his,
ISC_HIS_CFG_MODE_GR |
(isc->config.sd_format->cfa_baycfg
<< ISC_HIS_CFG_BAYSEL_SHIFT) |
ISC_HIS_CFG_RAR);
- regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_EN);
+ regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his,
+ ISC_HIS_CTRL_EN);
regmap_write(regmap, ISC_INTEN, ISC_INT_HISDONE);
ctrls->hist_id = ISC_HIS_CFG_MODE_GR;
isc_update_profile(isc);
@@ -692,7 +693,8 @@ static void isc_set_histogram(struct isc_device *isc, bool enable)
ctrls->hist_stat = HIST_ENABLED;
} else {
regmap_write(regmap, ISC_INTDIS, ISC_INT_HISDONE);
- regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_DIS);
+ regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his,
+ ISC_HIS_CTRL_DIS);
ctrls->hist_stat = HIST_DISABLED;
}
@@ -1821,7 +1823,8 @@ static void isc_awb_work(struct work_struct *w)
ctrls->awb = ISC_WB_NONE;
}
}
- regmap_write(regmap, ISC_HIS_CFG, hist_id | baysel | ISC_HIS_CFG_RAR);
+ regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his,
+ hist_id | baysel | ISC_HIS_CFG_RAR);
isc_update_profile(isc);
/* if awb has been disabled, we don't need to start another histogram */
if (ctrls->awb)
@@ -224,6 +224,8 @@
#define ISC_RLP_CFG_MODE_YYCC_LIMITED 0xc
#define ISC_RLP_CFG_MODE_MASK GENMASK(3, 0)
+/* Offset for HIS register specific to sama5d2 product */
+#define ISC_SAMA5D2_HIS_OFFSET 0
/* Histogram Control Register */
#define ISC_HIS_CTRL 0x000003d4
@@ -151,6 +151,7 @@ struct isc_ctrls {
* @sub422: Offset for the SUB422 register
* @sub420: Offset for the SUB420 register
* @rlp: Offset for the RLP register
+ * @his: Offset for the HIS related registers
*/
struct isc_reg_offsets {
u32 csc;
@@ -158,6 +159,7 @@ struct isc_reg_offsets {
u32 sub422;
u32 sub420;
u32 rlp;
+ u32 his;
};
/*
@@ -238,6 +238,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET;
isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET;
isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET;
+ isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET;
/* sama5d2-isc - 8 bits per beat */
isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
The HIS submodule is a part of the atmel-isc pipeline, and stands for Histogram. This module performs a color histogram that can be read and used by the main processor. Add his to the reg offsets struct. This will allow different products to have a different reg offset for this particular module. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- Changes in v3: - added module description in commit message drivers/media/platform/atmel/atmel-isc-base.c | 11 +++++++---- drivers/media/platform/atmel/atmel-isc-regs.h | 2 ++ drivers/media/platform/atmel/atmel-isc.h | 2 ++ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 1 + 4 files changed, 12 insertions(+), 4 deletions(-)