diff mbox series

[v5,04/24] v4l: mc: Start walk from a specific pad in use count calculation

Message ID 20210415130450.421168-5-tomi.valkeinen@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series v4l: subdev internal routing | expand

Commit Message

Tomi Valkeinen April 15, 2021, 1:04 p.m. UTC
From: Sakari Ailus <sakari.ailus@linux.intel.com>

With the addition of the recent has_route() media entity op, the pads of a
media entity are no longer all interconnected. This has to be taken into
account in power management.

Prepare for the addition of a helper function supporting S_ROUTING.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/v4l2-core/v4l2-mc.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/v4l2-core/v4l2-mc.c b/drivers/media/v4l2-core/v4l2-mc.c
index cbeb580c6754..35d18ed89fa5 100644
--- a/drivers/media/v4l2-core/v4l2-mc.c
+++ b/drivers/media/v4l2-core/v4l2-mc.c
@@ -427,17 +427,16 @@  EXPORT_SYMBOL_GPL(v4l2_create_fwnode_links);
 
 /*
  * pipeline_pm_use_count - Count the number of users of a pipeline
- * @entity: The entity
+ * @pad: Any pad along the pipeline
  *
  * Return the total number of users of all video device nodes in the pipeline.
  */
-static int pipeline_pm_use_count(struct media_entity *entity,
-	struct media_graph *graph)
+static int pipeline_pm_use_count(struct media_pad *pad,
+				 struct media_graph *graph)
 {
-	struct media_pad *pad;
 	int use = 0;
 
-	media_graph_walk_start(graph, entity->pads);
+	media_graph_walk_start(graph, pad);
 
 	while ((pad = media_graph_walk_next(graph))) {
 		if (is_media_entity_v4l2_video_device(pad->entity))
@@ -483,7 +482,7 @@  static int pipeline_pm_power_one(struct media_entity *entity, int change)
 
 /*
  * pipeline_pm_power - Apply power change to all entities in a pipeline
- * @entity: The entity
+ * @pad: Any pad along the pipeline
  * @change: Use count change
  *
  * Walk the pipeline to update the use count and the power state of all non-node
@@ -491,16 +490,16 @@  static int pipeline_pm_power_one(struct media_entity *entity, int change)
  *
  * Return 0 on success or a negative error code on failure.
  */
-static int pipeline_pm_power(struct media_entity *entity, int change,
-	struct media_graph *graph)
+static int pipeline_pm_power(struct media_pad *pad, int change,
+			     struct media_graph *graph)
 {
-	struct media_pad *tmp_pad, *pad;
+	struct media_pad *tmp_pad, *first = pad;
 	int ret = 0;
 
 	if (!change)
 		return 0;
 
-	media_graph_walk_start(graph, entity->pads);
+	media_graph_walk_start(graph, pad);
 
 	while (!ret && (pad = media_graph_walk_next(graph)))
 		if (is_media_entity_v4l2_subdev(pad->entity))
@@ -509,7 +508,7 @@  static int pipeline_pm_power(struct media_entity *entity, int change,
 	if (!ret)
 		return ret;
 
-	media_graph_walk_start(graph, entity->pads);
+	media_graph_walk_start(graph, first);
 
 	while ((tmp_pad = media_graph_walk_next(graph)) && tmp_pad != pad)
 		if (is_media_entity_v4l2_subdev(tmp_pad->entity))
@@ -531,7 +530,7 @@  static int v4l2_pipeline_pm_use(struct media_entity *entity, unsigned int use)
 	WARN_ON(entity->use_count < 0);
 
 	/* Apply power change to connected non-nodes. */
-	ret = pipeline_pm_power(entity, change, &mdev->pm_count_walk);
+	ret = pipeline_pm_power(entity->pads, change, &mdev->pm_count_walk);
 	if (ret < 0)
 		entity->use_count -= change;
 
@@ -557,8 +556,8 @@  int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
 			      unsigned int notification)
 {
 	struct media_graph *graph = &link->graph_obj.mdev->pm_count_walk;
-	struct media_entity *source = link->source->entity;
-	struct media_entity *sink = link->sink->entity;
+	struct media_pad *source = link->source;
+	struct media_pad *sink = link->sink;
 	int source_use;
 	int sink_use;
 	int ret = 0;