| Message ID | 20210522211055.15988-3-mirela.rabulea@oss.nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add dts and bindings update for i.MX8QM/QXP JPEG codec | expand |
> From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com> > Sent: Sunday, May 23, 2021 5:11 AM > Subject: [PATCH v13 2/2] arm64: dts: imx: Add jpeg encoder/decoder nodes > s/imx/imx8 > > Add dts for imaging subsytem, include jpeg nodes here. > Tested on imx8qxp/qm. > > Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> > --- > Changes in v13: > Adress feedback from Aisheng Dong and update the commit message: > - Move jpeg compatibles from imx8-ss-img.dtsi to imx8qxp-ss-img.dtsi > - Add imx8qm-ss-img.dtsi for i.MX8QM > > .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 80 +++++++++++++++++++ > .../boot/dts/freescale/imx8qm-ss-img.dtsi | 12 +++ > arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 + > .../boot/dts/freescale/imx8qxp-ss-img.dtsi | 13 +++ > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 + > 5 files changed, 109 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi > b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi > new file mode 100644 > index 000000000000..4b8456bb4712 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi > @@ -0,0 +1,80 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2019-2021 NXP > + * Zhou Guoniu <guoniu.zhou@nxp.com> > + */ > +img_subsys: bus@58000000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x58000000 0x0 0x58000000 0x1000000>; > + > + img_ipg_clk: clock-img-ipg { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <200000000>; > + clock-output-names = "img_ipg_clk"; > + }; > + > + jpegdec: jpegdec@58400000 { Node should be disabled by default. And enable it in board dts including LPCG. > + reg = <0x58400000 0x00050000 >; > + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, > + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; > + clock-names = "per", "ipg"; > + assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, > + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; > + assigned-clock-rates = <200000000>, <200000000>; > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, > + <&pd IMX_SC_R_MJPEG_DEC_S0>, > + <&pd IMX_SC_R_MJPEG_DEC_S1>, > + <&pd IMX_SC_R_MJPEG_DEC_S2>, > + <&pd IMX_SC_R_MJPEG_DEC_S3>; > + }; > + > + jpegenc: jpegenc@58450000 { Ditto > + reg = <0x58450000 0x00050000 >; > + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, > + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; > + clock-names = "per", "ipg"; > + assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, > + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; > + assigned-clock-rates = <200000000>, <200000000>; > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, > + <&pd IMX_SC_R_MJPEG_ENC_S0>, > + <&pd IMX_SC_R_MJPEG_ENC_S1>, > + <&pd IMX_SC_R_MJPEG_ENC_S2>, > + <&pd IMX_SC_R_MJPEG_ENC_S3>; > + }; > + > + img_jpeg_dec_lpcg: clock-controller@585d0000 { Ditto > + compatible = "fsl,imx8qxp-lpcg"; > + reg = <0x585d0000 0x10000>; > + #clock-cells = <1>; > + clocks = <&img_ipg_clk>, <&img_ipg_clk>; > + clock-indices = <IMX_LPCG_CLK_0>, > + <IMX_LPCG_CLK_4>; > + clock-output-names = "img_jpeg_dec_lpcg_clk", > + "img_jpeg_dec_lpcg_ipg_clk"; > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>; > + }; > + > + img_jpeg_enc_lpcg: clock-controller@585f0000 { > + compatible = "fsl,imx8qxp-lpcg"; Ditto Otherwise, I'm fine with this patch. > + reg = <0x585f0000 0x10000>; > + #clock-cells = <1>; > + clocks = <&img_ipg_clk>, <&img_ipg_clk>; > + clock-indices = <IMX_LPCG_CLK_0>, > + <IMX_LPCG_CLK_4>; > + clock-output-names = "img_jpeg_enc_lpcg_clk", > + "img_jpeg_enc_lpcg_ipg_clk"; > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > new file mode 100644 > index 000000000000..7764b4146e0a > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > @@ -0,0 +1,12 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2021 NXP > + */ > + > +&jpegdec { > + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec"; }; > + > +&jpegenc { > + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc"; }; > diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi > b/arch/arm64/boot/dts/freescale/imx8qm.dtsi > index 12cd059b339b..aebbe2b84aa1 100644 > --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi > @@ -166,11 +166,13 @@ > }; > > /* sorted in register address */ > + #include "imx8-ss-img.dtsi" > #include "imx8-ss-dma.dtsi" > #include "imx8-ss-conn.dtsi" > #include "imx8-ss-lsio.dtsi" > }; > > +#include "imx8qm-ss-img.dtsi" > #include "imx8qm-ss-dma.dtsi" > #include "imx8qm-ss-conn.dtsi" > #include "imx8qm-ss-lsio.dtsi" > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > new file mode 100644 > index 000000000000..3a087317591d > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > @@ -0,0 +1,13 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2021 NXP > + * Dong Aisheng <aisheng.dong@nxp.com> > + */ > + > +&jpegdec { > + compatible = "nxp,imx8qxp-jpgdec"; > +}; > + > +&jpegenc { > + compatible = "nxp,imx8qxp-jpgenc"; > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > index 1e6b4995091e..a625fb6bdc62 100644 > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > @@ -258,12 +258,14 @@ > }; > > /* sorted in register address */ > + #include "imx8-ss-img.dtsi" > #include "imx8-ss-adma.dtsi" > #include "imx8-ss-conn.dtsi" > #include "imx8-ss-ddr.dtsi" > #include "imx8-ss-lsio.dtsi" > }; > > +#include "imx8qxp-ss-img.dtsi" > #include "imx8qxp-ss-adma.dtsi" > #include "imx8qxp-ss-conn.dtsi" > #include "imx8qxp-ss-lsio.dtsi" > -- > 2.17.1
Hi Aisheng, Ezequiel, On Mon, 2021-05-24 at 03:28 +0000, Aisheng Dong wrote: > > From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com> > > Sent: Sunday, May 23, 2021 5:11 AM > > Subject: [PATCH v13 2/2] arm64: dts: imx: Add jpeg encoder/decoder > > nodes > > > > s/imx/imx8 Ok, I'll use imx8 in patch subject. > > > > > Add dts for imaging subsytem, include jpeg nodes here. > > Tested on imx8qxp/qm. > > > > Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> > > --- > > Changes in v13: > > Adress feedback from Aisheng Dong and update the commit message: > > - Move jpeg compatibles from imx8-ss-img.dtsi to imx8qxp-ss- > > img.dtsi > > - Add imx8qm-ss-img.dtsi for i.MX8QM > > > > .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 80 > > +++++++++++++++++++ > > .../boot/dts/freescale/imx8qm-ss-img.dtsi | 12 +++ > > arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 + > > .../boot/dts/freescale/imx8qxp-ss-img.dtsi | 13 +++ > > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 + > > 5 files changed, 109 insertions(+) > > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi > > create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss- > > img.dtsi > > create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss- > > img.dtsi > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi > > b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi > > new file mode 100644 > > index 000000000000..4b8456bb4712 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi > > @@ -0,0 +1,80 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright 2019-2021 NXP > > + * Zhou Guoniu <guoniu.zhou@nxp.com> > > + */ > > +img_subsys: bus@58000000 { > > + compatible = "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0x58000000 0x0 0x58000000 0x1000000>; > > + > > + img_ipg_clk: clock-img-ipg { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <200000000>; > > + clock-output-names = "img_ipg_clk"; > > + }; > > + > > + jpegdec: jpegdec@58400000 { > > Node should be disabled by default. > And enable it in board dts including LPCG. At version v5 of this patch, the node was disabled by default, and I received this feedback from Ezequiel Garcia: "Pure memory-to-memory are typically not enabled per-board, but just per-platform. So you can drop the disabled status here." So, in v6 I made it enabled by default. Any strong reasons for enabled/disabled per platform? Thanks, Mirela > > > + reg = <0x58400000 0x00050000 >; > > + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, > > + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; > > + clock-names = "per", "ipg"; > > + assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, > > + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; > > + assigned-clock-rates = <200000000>, <200000000>; > > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, > > + <&pd IMX_SC_R_MJPEG_DEC_S0>, > > + <&pd IMX_SC_R_MJPEG_DEC_S1>, > > + <&pd IMX_SC_R_MJPEG_DEC_S2>, > > + <&pd IMX_SC_R_MJPEG_DEC_S3>; > > + }; > > + > > + jpegenc: jpegenc@58450000 { > > Ditto > > > + reg = <0x58450000 0x00050000 >; > > + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, > > + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; > > + clock-names = "per", "ipg"; > > + assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, > > + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; > > + assigned-clock-rates = <200000000>, <200000000>; > > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, > > + <&pd IMX_SC_R_MJPEG_ENC_S0>, > > + <&pd IMX_SC_R_MJPEG_ENC_S1>, > > + <&pd IMX_SC_R_MJPEG_ENC_S2>, > > + <&pd IMX_SC_R_MJPEG_ENC_S3>; > > + }; > > + > > + img_jpeg_dec_lpcg: clock-controller@585d0000 { > > Ditto > > > + compatible = "fsl,imx8qxp-lpcg"; > > + reg = <0x585d0000 0x10000>; > > + #clock-cells = <1>; > > + clocks = <&img_ipg_clk>, <&img_ipg_clk>; > > + clock-indices = <IMX_LPCG_CLK_0>, > > + <IMX_LPCG_CLK_4>; > > + clock-output-names = "img_jpeg_dec_lpcg_clk", > > + "img_jpeg_dec_lpcg_ipg_clk"; > > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>; > > + }; > > + > > + img_jpeg_enc_lpcg: clock-controller@585f0000 { > > + compatible = "fsl,imx8qxp-lpcg"; > > Ditto > > Otherwise, I'm fine with this patch. > > > + reg = <0x585f0000 0x10000>; > > + #clock-cells = <1>; > > + clocks = <&img_ipg_clk>, <&img_ipg_clk>; > > + clock-indices = <IMX_LPCG_CLK_0>, > > + <IMX_LPCG_CLK_4>; > > + clock-output-names = "img_jpeg_enc_lpcg_clk", > > + "img_jpeg_enc_lpcg_ipg_clk"; > > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>; > > + }; > > +}; > > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > > b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > > new file mode 100644 > > index 000000000000..7764b4146e0a > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > > @@ -0,0 +1,12 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright 2021 NXP > > + */ > > + > > +&jpegdec { > > + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec"; }; > > + > > +&jpegenc { > > + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc"; }; > > diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi > > b/arch/arm64/boot/dts/freescale/imx8qm.dtsi > > index 12cd059b339b..aebbe2b84aa1 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi > > @@ -166,11 +166,13 @@ > > }; > > > > /* sorted in register address */ > > + #include "imx8-ss-img.dtsi" > > #include "imx8-ss-dma.dtsi" > > #include "imx8-ss-conn.dtsi" > > #include "imx8-ss-lsio.dtsi" > > }; > > > > +#include "imx8qm-ss-img.dtsi" > > #include "imx8qm-ss-dma.dtsi" > > #include "imx8qm-ss-conn.dtsi" > > #include "imx8qm-ss-lsio.dtsi" > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > > b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > > new file mode 100644 > > index 000000000000..3a087317591d > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > > @@ -0,0 +1,13 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright 2021 NXP > > + * Dong Aisheng <aisheng.dong@nxp.com> > > + */ > > + > > +&jpegdec { > > + compatible = "nxp,imx8qxp-jpgdec"; > > +}; > > + > > +&jpegenc { > > + compatible = "nxp,imx8qxp-jpgenc"; > > +}; > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > index 1e6b4995091e..a625fb6bdc62 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > @@ -258,12 +258,14 @@ > > }; > > > > /* sorted in register address */ > > + #include "imx8-ss-img.dtsi" > > #include "imx8-ss-adma.dtsi" > > #include "imx8-ss-conn.dtsi" > > #include "imx8-ss-ddr.dtsi" > > #include "imx8-ss-lsio.dtsi" > > }; > > > > +#include "imx8qxp-ss-img.dtsi" > > #include "imx8qxp-ss-adma.dtsi" > > #include "imx8qxp-ss-conn.dtsi" > > #include "imx8qxp-ss-lsio.dtsi" > > -- > > 2.17.1 > >
[...] > > > +img_subsys: bus@58000000 { > > > + compatible = "simple-bus"; > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + ranges = <0x58000000 0x0 0x58000000 0x1000000>; > > > + > > > + img_ipg_clk: clock-img-ipg { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <200000000>; > > > + clock-output-names = "img_ipg_clk"; > > > + }; > > > + > > > + jpegdec: jpegdec@58400000 { > > > > Node should be disabled by default. > > And enable it in board dts including LPCG. > > At version v5 of this patch, the node was disabled by default, and I > received this feedback from Ezequiel Garcia: > > "Pure memory-to-memory are typically not enabled per-board, but just > per-platform. > So you can drop the disabled status here." > > So, in v6 I made it enabled by default. > > Any strong reasons for enabled/disabled per platform? AFAIK we usually only enable system basic features and let other user selectable features disabled by default in dts. Even for device LPCG clocks, if it's enabled by default and later enter runtime suspend if no users, it still consumes power. Regards Aisheng > > Thanks, > Mirela > > > > > > + reg = <0x58400000 0x00050000 >; > > > + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, > > > + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, > > > + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, > > > + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; > > > + clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, > > > + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; > > > + clock-names = "per", "ipg"; > > > + assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, > > > + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; > > > + assigned-clock-rates = <200000000>, <200000000>; > > > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, > > > + <&pd IMX_SC_R_MJPEG_DEC_S0>, > > > + <&pd IMX_SC_R_MJPEG_DEC_S1>, > > > + <&pd IMX_SC_R_MJPEG_DEC_S2>, > > > + <&pd IMX_SC_R_MJPEG_DEC_S3>; > > > + }; > > > + > > > + jpegenc: jpegenc@58450000 { > > > > Ditto > > > > > + reg = <0x58450000 0x00050000 >; > > > + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, > > > + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, > > > + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, > > > + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; > > > + clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, > > > + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; > > > + clock-names = "per", "ipg"; > > > + assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, > > > + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; > > > + assigned-clock-rates = <200000000>, <200000000>; > > > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, > > > + <&pd IMX_SC_R_MJPEG_ENC_S0>, > > > + <&pd IMX_SC_R_MJPEG_ENC_S1>, > > > + <&pd IMX_SC_R_MJPEG_ENC_S2>, > > > + <&pd IMX_SC_R_MJPEG_ENC_S3>; > > > + }; > > > + > > > + img_jpeg_dec_lpcg: clock-controller@585d0000 { > > > > Ditto > > > > > + compatible = "fsl,imx8qxp-lpcg"; > > > + reg = <0x585d0000 0x10000>; > > > + #clock-cells = <1>; > > > + clocks = <&img_ipg_clk>, <&img_ipg_clk>; > > > + clock-indices = <IMX_LPCG_CLK_0>, > > > + <IMX_LPCG_CLK_4>; > > > + clock-output-names = "img_jpeg_dec_lpcg_clk", > > > + "img_jpeg_dec_lpcg_ipg_clk"; > > > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>; > > > + }; > > > + > > > + img_jpeg_enc_lpcg: clock-controller@585f0000 { > > > + compatible = "fsl,imx8qxp-lpcg"; > > > > Ditto > > > > Otherwise, I'm fine with this patch. > > > > > + reg = <0x585f0000 0x10000>; > > > + #clock-cells = <1>; > > > + clocks = <&img_ipg_clk>, <&img_ipg_clk>; > > > + clock-indices = <IMX_LPCG_CLK_0>, > > > + <IMX_LPCG_CLK_4>; > > > + clock-output-names = "img_jpeg_enc_lpcg_clk", > > > + "img_jpeg_enc_lpcg_ipg_clk"; > > > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>; > > > + }; > > > +}; > > > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > > > b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > > > new file mode 100644 > > > index 000000000000..7764b4146e0a > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi > > > @@ -0,0 +1,12 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > +/* > > > + * Copyright 2021 NXP > > > + */ > > > + > > > +&jpegdec { > > > + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec"; }; > > > + > > > +&jpegenc { > > > + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc"; }; > > > diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi > > > b/arch/arm64/boot/dts/freescale/imx8qm.dtsi > > > index 12cd059b339b..aebbe2b84aa1 100644 > > > --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi > > > +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi > > > @@ -166,11 +166,13 @@ > > > }; > > > > > > /* sorted in register address */ > > > + #include "imx8-ss-img.dtsi" > > > #include "imx8-ss-dma.dtsi" > > > #include "imx8-ss-conn.dtsi" > > > #include "imx8-ss-lsio.dtsi" > > > }; > > > > > > +#include "imx8qm-ss-img.dtsi" > > > #include "imx8qm-ss-dma.dtsi" > > > #include "imx8qm-ss-conn.dtsi" > > > #include "imx8qm-ss-lsio.dtsi" > > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > > > b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > > > new file mode 100644 > > > index 000000000000..3a087317591d > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi > > > @@ -0,0 +1,13 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > +/* > > > + * Copyright 2021 NXP > > > + * Dong Aisheng <aisheng.dong@nxp.com> > > > + */ > > > + > > > +&jpegdec { > > > + compatible = "nxp,imx8qxp-jpgdec"; > > > +}; > > > + > > > +&jpegenc { > > > + compatible = "nxp,imx8qxp-jpgenc"; > > > +}; > > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > > index 1e6b4995091e..a625fb6bdc62 100644 > > > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > > @@ -258,12 +258,14 @@ > > > }; > > > > > > /* sorted in register address */ > > > + #include "imx8-ss-img.dtsi" > > > #include "imx8-ss-adma.dtsi" > > > #include "imx8-ss-conn.dtsi" > > > #include "imx8-ss-ddr.dtsi" > > > #include "imx8-ss-lsio.dtsi" > > > }; > > > > > > +#include "imx8qxp-ss-img.dtsi" > > > #include "imx8qxp-ss-adma.dtsi" > > > #include "imx8qxp-ss-conn.dtsi" > > > #include "imx8qxp-ss-lsio.dtsi" > > > -- > > > 2.17.1 > > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Fri, 2021-06-11 at 21:33 +0800, Dong Aisheng wrote: > [...] > > > > > +img_subsys: bus@58000000 { > > > > + compatible = "simple-bus"; > > > > + #address-cells = <1>; > > > > + #size-cells = <1>; > > > > + ranges = <0x58000000 0x0 0x58000000 0x1000000>; > > > > + > > > > + img_ipg_clk: clock-img-ipg { > > > > + compatible = "fixed-clock"; > > > > + #clock-cells = <0>; > > > > + clock-frequency = <200000000>; > > > > + clock-output-names = "img_ipg_clk"; > > > > + }; > > > > + > > > > + jpegdec: jpegdec@58400000 { > > > > > > Node should be disabled by default. > > > And enable it in board dts including LPCG. > > > > At version v5 of this patch, the node was disabled by default, and I > > received this feedback from Ezequiel Garcia: > > > > "Pure memory-to-memory are typically not enabled per-board, but just > > per-platform. > > So you can drop the disabled status here." > > > > So, in v6 I made it enabled by default. > > > > Any strong reasons for enabled/disabled per platform? > > AFAIK we usually only enable system basic features and let other > user selectable features disabled by default in dts. > Even for device LPCG clocks, if it's enabled by default and later > enter runtime suspend if no users, it still consumes power. > Well-written drivers shouldn't draw any power if not used. And DT is about hardware-description, not about usage-description. Which means, at the soc.dtsi level you disable devices that need some board-level hardware thing to be enabled (e.g. a physical connected, a regulator, etc.). A pure memory-to-memory should be enabled by default, because in practice you can't predict what the users a board will want to use, nor the DT is the place for that. Sticking to hardware description is the best way to get DT right :-) Cheers, Ezequiel
On Fri, Jun 11, 2021 at 11:01 PM Ezequiel Garcia <ezequiel@collabora.com> wrote: > > On Fri, 2021-06-11 at 21:33 +0800, Dong Aisheng wrote: > > [...] > > > > > > > +img_subsys: bus@58000000 { > > > > > + compatible = "simple-bus"; > > > > > + #address-cells = <1>; > > > > > + #size-cells = <1>; > > > > > + ranges = <0x58000000 0x0 0x58000000 0x1000000>; > > > > > + > > > > > + img_ipg_clk: clock-img-ipg { > > > > > + compatible = "fixed-clock"; > > > > > + #clock-cells = <0>; > > > > > + clock-frequency = <200000000>; > > > > > + clock-output-names = "img_ipg_clk"; > > > > > + }; > > > > > + > > > > > + jpegdec: jpegdec@58400000 { > > > > > > > > Node should be disabled by default. > > > > And enable it in board dts including LPCG. > > > > > > At version v5 of this patch, the node was disabled by default, and I > > > received this feedback from Ezequiel Garcia: > > > > > > "Pure memory-to-memory are typically not enabled per-board, but just > > > per-platform. > > > So you can drop the disabled status here." > > > > > > So, in v6 I made it enabled by default. > > > > > > Any strong reasons for enabled/disabled per platform? > > > > AFAIK we usually only enable system basic features and let other > > user selectable features disabled by default in dts. > > Even for device LPCG clocks, if it's enabled by default and later > > enter runtime suspend if no users, it still consumes power. > > > > Well-written drivers shouldn't draw any power if not used. > LPCG won't draw power when not used. But the power domain used by LPCG will still draw power when enter idle state. > And DT is about hardware-description, not about usage-description. > Which means, at the soc.dtsi level you disable devices that need > some board-level hardware thing to be enabled (e.g. a physical > connected, a regulator, etc.). > A pure memory-to-memory should be enabled by default, because > in practice you can't predict what the users a board will want > to use, nor the DT is the place for that. It makes sense to me. Thanks Mirela, Please follow up with Ezequiel's suggestion. For LPCGS used by jpeg, you can keep it enabled by default. Regards Aisheng > > Sticking to hardware description is the best way to get DT right :-) > > Cheers, > Ezequiel >
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi new file mode 100644 index 000000000000..4b8456bb4712 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 NXP + * Zhou Guoniu <guoniu.zhou@nxp.com> + */ +img_subsys: bus@58000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x58000000 0x0 0x58000000 0x1000000>; + + img_ipg_clk: clock-img-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "img_ipg_clk"; + }; + + jpegdec: jpegdec@58400000 { + reg = <0x58400000 0x00050000 >; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <200000000>, <200000000>; + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, + <&pd IMX_SC_R_MJPEG_DEC_S0>, + <&pd IMX_SC_R_MJPEG_DEC_S1>, + <&pd IMX_SC_R_MJPEG_DEC_S2>, + <&pd IMX_SC_R_MJPEG_DEC_S3>; + }; + + jpegenc: jpegenc@58450000 { + reg = <0x58450000 0x00050000 >; + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <200000000>, <200000000>; + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, + <&pd IMX_SC_R_MJPEG_ENC_S0>, + <&pd IMX_SC_R_MJPEG_ENC_S1>, + <&pd IMX_SC_R_MJPEG_ENC_S2>, + <&pd IMX_SC_R_MJPEG_ENC_S3>; + }; + + img_jpeg_dec_lpcg: clock-controller@585d0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x585d0000 0x10000>; + #clock-cells = <1>; + clocks = <&img_ipg_clk>, <&img_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, + <IMX_LPCG_CLK_4>; + clock-output-names = "img_jpeg_dec_lpcg_clk", + "img_jpeg_dec_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>; + }; + + img_jpeg_enc_lpcg: clock-controller@585f0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x585f0000 0x10000>; + #clock-cells = <1>; + clocks = <&img_ipg_clk>, <&img_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, + <IMX_LPCG_CLK_4>; + clock-output-names = "img_jpeg_enc_lpcg_clk", + "img_jpeg_enc_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi new file mode 100644 index 000000000000..7764b4146e0a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + */ + +&jpegdec { + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec"; +}; + +&jpegenc { + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 12cd059b339b..aebbe2b84aa1 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -166,11 +166,13 @@ }; /* sorted in register address */ + #include "imx8-ss-img.dtsi" #include "imx8-ss-dma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-lsio.dtsi" }; +#include "imx8qm-ss-img.dtsi" #include "imx8qm-ss-dma.dtsi" #include "imx8qm-ss-conn.dtsi" #include "imx8qm-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi new file mode 100644 index 000000000000..3a087317591d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&jpegdec { + compatible = "nxp,imx8qxp-jpgdec"; +}; + +&jpegenc { + compatible = "nxp,imx8qxp-jpgenc"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 1e6b4995091e..a625fb6bdc62 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -258,12 +258,14 @@ }; /* sorted in register address */ + #include "imx8-ss-img.dtsi" #include "imx8-ss-adma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-ddr.dtsi" #include "imx8-ss-lsio.dtsi" }; +#include "imx8qxp-ss-img.dtsi" #include "imx8qxp-ss-adma.dtsi" #include "imx8qxp-ss-conn.dtsi" #include "imx8qxp-ss-lsio.dtsi"