diff mbox series

[2/2] media: i2c: adv7180: fix adv7280 BT.656-4 compatibility

Message ID 20210527173209.3874124-2-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/2] dt-bindings: adv7180: Introduce adv,adv7182-force-bt656-4 | expand

Commit Message

Fabio Estevam May 27, 2021, 5:32 p.m. UTC 
From: Matthew Michilot <matthew.michilot@gmail.com>

Captured video would be out of sync when using the adv7280 with
the BT.656-4 protocol. Certain registers (0x04, 0x31, 0xE6) had to
be configured properly to ensure BT.656-4 compatibility.

An error in the adv7280 reference manual suggested that EAV/SAV mode
was enabled by default, however upon inspecting register 0x31, it was
determined to be disabled by default.

Signed-off-by: Matthew Michilot <matthew.michilot@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
[fabio: Introduce "adv,adv7182-force-bt656-4"]
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Only force BT656-4 when the DT property is present.
 drivers/media/i2c/adv7180.c | 30 ++++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 44bb6fe85644..a532df813d74 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -94,6 +94,7 @@ 
 #define ADV7180_REG_SHAP_FILTER_CTL_1	0x0017
 #define ADV7180_REG_CTRL_2		0x001d
 #define ADV7180_REG_VSYNC_FIELD_CTL_1	0x0031
+#define ADV7180_VSYNC_FIELD_CTL_1_NEWAV 0x12
 #define ADV7180_REG_MANUAL_WIN_CTL_1	0x003d
 #define ADV7180_REG_MANUAL_WIN_CTL_2	0x003e
 #define ADV7180_REG_MANUAL_WIN_CTL_3	0x003f
@@ -216,6 +217,7 @@  struct adv7180_state {
 	struct i2c_client	*vpp_client;
 	const struct adv7180_chip_info *chip_info;
 	enum v4l2_field		field;
+	bool			force_bt656_4;
 };
 #define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler,		\
 					    struct adv7180_state,	\
@@ -963,10 +965,26 @@  static int adv7182_init(struct adv7180_state *state)
 		adv7180_write(state, ADV7180_REG_EXTENDED_OUTPUT_CONTROL, 0x57);
 		adv7180_write(state, ADV7180_REG_CTRL_2, 0xc0);
 	} else {
-		if (state->chip_info->flags & ADV7180_FLAG_V2)
-			adv7180_write(state,
-				      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
-				      0x17);
+		if (state->chip_info->flags & ADV7180_FLAG_V2) {
+			if (state->force_bt656_4) {
+				/* ITU-R BT.656-4 compatible */
+				adv7180_write(state,
+					      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
+					      ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
+				/* Manually set NEWAVMODE */
+				adv7180_write(state,
+					      ADV7180_REG_VSYNC_FIELD_CTL_1,
+					      ADV7180_VSYNC_FIELD_CTL_1_NEWAV);
+				/* Manually set V bit end position in NTSC mode */
+				adv7180_write(state,
+					     ADV7180_REG_NTSC_V_BIT_END,
+					     ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+			} else {
+				adv7180_write(state,
+					      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
+					      0x17);
+			}
+		}
 		else
 			adv7180_write(state,
 				      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
@@ -1314,6 +1332,7 @@  static int init_device(struct adv7180_state *state)
 static int adv7180_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct device_node *np = client->dev.of_node;
 	struct adv7180_state *state;
 	struct v4l2_subdev *sd;
 	int ret;
@@ -1338,6 +1357,9 @@  static int adv7180_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	if (of_property_read_bool(np, "adv,adv7182-force-bt656-4"))
+		state->force_bt656_4 = true;
+
 	if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
 		state->csi_client = i2c_new_dummy_device(client->adapter,
 				ADV7180_DEFAULT_CSI_I2C_ADDR);