| Message ID | 20210622113958.809173-3-stanimir.varbanov@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Intra-refresh period control | expand |
On 22/06/2021 13:39, Stanimir Varbanov wrote: > Add a control to set intra-refresh period. > > Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Thanks! Hans > --- > .../userspace-api/media/v4l/ext-ctrls-codec.rst | 17 ++++++++++++++++- > drivers/media/v4l2-core/v4l2-ctrls-defs.c | 2 ++ > include/uapi/linux/v4l2-controls.h | 1 + > 3 files changed, 19 insertions(+), 1 deletion(-) > > diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > index addf44b99dfa..64c76a3a1205 100644 > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > @@ -1175,9 +1175,24 @@ enum v4l2_mpeg_video_h264_entropy_mode - > macroblocks refreshed every frame. Each frame a successive set of > macroblocks is refreshed until the cycle completes and starts from > the top of the frame. Setting this control to zero means that > - macroblocks will not be refreshed. > + macroblocks will not be refreshed. Note that this control will not > + take effect when ``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD`` control > + is set to non zero value. > Applicable to H264, H263 and MPEG4 encoder. > > +``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)`` > + Intra macroblock refresh period. This sets the period to refresh > + the whole frame. In other words, this defines the number of frames > + for which the whole frame will be intra-refreshed. An example: > + setting period to 1 means that the whole frame will be refreshed, > + setting period to 2 means that the half of macroblocks will be > + intra-refreshed on frameX and the other half of macroblocks > + will be refreshed in frameX + 1 and so on. Setting the period to > + zero means no period is specified. > + Note that if the client sets this control to non zero value the > + ``V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB`` control shall be > + ignored. Applicable to H264 and HEVC encoders. > + > ``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)`` > Frame level rate control enable. If this control is disabled then > the quantization parameter for each frame type is constant and set > diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c > index b6344bbf1e00..421300e13a41 100644 > --- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c > +++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c > @@ -833,6 +833,7 @@ const char *v4l2_ctrl_get_name(u32 id) > case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE: return "Decoder Slice Interface"; > case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER: return "MPEG4 Loop Filter Enable"; > case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB: return "Number of Intra Refresh MBs"; > + case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD: return "Intra Refresh Period"; > case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE: return "Frame Level Rate Control Enable"; > case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE: return "H264 MB Level Rate Control"; > case V4L2_CID_MPEG_VIDEO_HEADER_MODE: return "Sequence Header Mode"; > @@ -1258,6 +1259,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, > case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE: > case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE: > case V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY: > + case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD: > *type = V4L2_CTRL_TYPE_INTEGER; > break; > case V4L2_CID_MPEG_VIDEO_LTR_COUNT: > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h > index fdf97a6d7d18..5532b5f68493 100644 > --- a/include/uapi/linux/v4l2-controls.h > +++ b/include/uapi/linux/v4l2-controls.h > @@ -435,6 +435,7 @@ enum v4l2_mpeg_video_multi_slice_mode { > #define V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (V4L2_CID_CODEC_BASE+233) > #define V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (V4L2_CID_CODEC_BASE+234) > #define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+235) > +#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (V4L2_CID_CODEC_BASE+236) > > /* CIDs for the MPEG-2 Part 2 (H.262) codec */ > #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270) >
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index addf44b99dfa..64c76a3a1205 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -1175,9 +1175,24 @@ enum v4l2_mpeg_video_h264_entropy_mode - macroblocks refreshed every frame. Each frame a successive set of macroblocks is refreshed until the cycle completes and starts from the top of the frame. Setting this control to zero means that - macroblocks will not be refreshed. + macroblocks will not be refreshed. Note that this control will not + take effect when ``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD`` control + is set to non zero value. Applicable to H264, H263 and MPEG4 encoder. +``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)`` + Intra macroblock refresh period. This sets the period to refresh + the whole frame. In other words, this defines the number of frames + for which the whole frame will be intra-refreshed. An example: + setting period to 1 means that the whole frame will be refreshed, + setting period to 2 means that the half of macroblocks will be + intra-refreshed on frameX and the other half of macroblocks + will be refreshed in frameX + 1 and so on. Setting the period to + zero means no period is specified. + Note that if the client sets this control to non zero value the + ``V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB`` control shall be + ignored. Applicable to H264 and HEVC encoders. + ``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)`` Frame level rate control enable. If this control is disabled then the quantization parameter for each frame type is constant and set diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c index b6344bbf1e00..421300e13a41 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c +++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c @@ -833,6 +833,7 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE: return "Decoder Slice Interface"; case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER: return "MPEG4 Loop Filter Enable"; case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB: return "Number of Intra Refresh MBs"; + case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD: return "Intra Refresh Period"; case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE: return "Frame Level Rate Control Enable"; case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE: return "H264 MB Level Rate Control"; case V4L2_CID_MPEG_VIDEO_HEADER_MODE: return "Sequence Header Mode"; @@ -1258,6 +1259,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE: case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE: case V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY: + case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD: *type = V4L2_CTRL_TYPE_INTEGER; break; case V4L2_CID_MPEG_VIDEO_LTR_COUNT: diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index fdf97a6d7d18..5532b5f68493 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -435,6 +435,7 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (V4L2_CID_CODEC_BASE+233) #define V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (V4L2_CID_CODEC_BASE+234) #define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+235) +#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (V4L2_CID_CODEC_BASE+236) /* CIDs for the MPEG-2 Part 2 (H.262) codec */ #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270)
Add a control to set intra-refresh period. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> --- .../userspace-api/media/v4l/ext-ctrls-codec.rst | 17 ++++++++++++++++- drivers/media/v4l2-core/v4l2-ctrls-defs.c | 2 ++ include/uapi/linux/v4l2-controls.h | 1 + 3 files changed, 19 insertions(+), 1 deletion(-)