diff mbox series

[v7,1/3] media: imx6-mipi-csi2: use pre_streamon callback to set sensor into LP11

Message ID 20211021160308.1962585-2-m.tretter@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series media: i2c: isl7998x: Add driver for Intersil ISL7998x | expand

Commit Message

Michael Tretter Oct. 21, 2021, 4:03 p.m. UTC 
Step 5 expects that the sensor is in LP11 mode. Use the new
pre_streamon callback to signal the sensor that it should switch into
LP11.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changelog:

v7: none

v6: none

v5:

- ignore -ENOIOCTLCMD of pre_streamon for backwards compatibility

v4:

- new patch
---
 drivers/staging/media/imx/imx6-mipi-csi2.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/staging/media/imx/imx6-mipi-csi2.c b/drivers/staging/media/imx/imx6-mipi-csi2.c
index a0941fc2907b..558b256ac935 100644
--- a/drivers/staging/media/imx/imx6-mipi-csi2.c
+++ b/drivers/staging/media/imx/imx6-mipi-csi2.c
@@ -382,13 +382,17 @@  static int csi2_start(struct csi2_dev *csi2)
 	csi2_enable(csi2, true);
 
 	/* Step 5 */
+	ret = v4l2_subdev_call(csi2->src_sd, video, pre_streamon,
+			       V4L2_SUBDEV_PRE_STREAMON_FL_MANUAL_LP);
+	if (ret && ret != -ENOIOCTLCMD)
+		goto err_assert_reset;
 	csi2_dphy_wait_stopstate(csi2, lanes);
 
 	/* Step 6 */
 	ret = v4l2_subdev_call(csi2->src_sd, video, s_stream, 1);
 	ret = (ret && ret != -ENOIOCTLCMD) ? ret : 0;
 	if (ret)
-		goto err_assert_reset;
+		goto err_stop_lp11;
 
 	/* Step 7 */
 	ret = csi2_dphy_wait_clock_lane(csi2);
@@ -399,6 +403,8 @@  static int csi2_start(struct csi2_dev *csi2)
 
 err_stop_upstream:
 	v4l2_subdev_call(csi2->src_sd, video, s_stream, 0);
+err_stop_lp11:
+	v4l2_subdev_call(csi2->src_sd, video, post_streamoff);
 err_assert_reset:
 	csi2_enable(csi2, false);
 err_disable_clk:
@@ -410,6 +416,7 @@  static void csi2_stop(struct csi2_dev *csi2)
 {
 	/* stop upstream */
 	v4l2_subdev_call(csi2->src_sd, video, s_stream, 0);
+	v4l2_subdev_call(csi2->src_sd, video, post_streamoff);
 
 	csi2_enable(csi2, false);
 	clk_disable_unprepare(csi2->pix_clk);