@@ -659,8 +659,6 @@ struct ov8865_mode {
unsigned int blc_anchor_right_start;
unsigned int blc_anchor_right_end;
- struct v4l2_fract frame_interval;
-
bool pll2_binning;
const struct ov8865_register_value *register_values;
@@ -964,7 +962,7 @@ static const struct ov8865_mode ov8865_modes[] = {
{
/* Horizontal */
.output_size_x = 3264,
- .hts = 1944,
+ .hts = 3888,
/* Vertical */
.output_size_y = 2448,
@@ -1003,9 +1001,6 @@ static const struct ov8865_mode ov8865_modes[] = {
.blc_anchor_right_start = 1984,
.blc_anchor_right_end = 2239,
- /* Frame Interval */
- .frame_interval = { 1, 30 },
-
/* PLL */
.pll2_binning = false,
@@ -1018,11 +1013,11 @@ static const struct ov8865_mode ov8865_modes[] = {
{
/* Horizontal */
.output_size_x = 3264,
- .hts = 2582,
+ .hts = 3888,
/* Vertical */
.output_size_y = 1836,
- .vts = 2002,
+ .vts = 2470,
.size_auto = true,
.size_auto_boundary_x = 8,
@@ -1057,9 +1052,6 @@ static const struct ov8865_mode ov8865_modes[] = {
.blc_anchor_right_start = 1984,
.blc_anchor_right_end = 2239,
- /* Frame Interval */
- .frame_interval = { 1, 30 },
-
/* PLL */
.pll2_binning = false,
@@ -1115,9 +1107,6 @@ static const struct ov8865_mode ov8865_modes[] = {
.blc_anchor_right_start = 992,
.blc_anchor_right_end = 1119,
- /* Frame Interval */
- .frame_interval = { 1, 30 },
-
/* PLL */
.pll2_binning = true,
@@ -1179,9 +1168,6 @@ static const struct ov8865_mode ov8865_modes[] = {
.blc_anchor_right_start = 992,
.blc_anchor_right_end = 1119,
- /* Frame Interval */
- .frame_interval = { 1, 90 },
-
/* PLL */
.pll2_binning = true,
@@ -2628,11 +2614,18 @@ static int ov8865_g_frame_interval(struct v4l2_subdev *subdev,
{
struct ov8865_sensor *sensor = ov8865_subdev_sensor(subdev);
const struct ov8865_mode *mode;
+ unsigned int framesize;
+ unsigned int fps;
mutex_lock(&sensor->mutex);
mode = sensor->state.mode;
- interval->interval = mode->frame_interval;
+ framesize = mode->hts * (mode->output_size_y +
+ sensor->ctrls.vblank->val);
+ fps = DIV_ROUND_CLOSEST(sensor->ctrls.pixel_rate->val, framesize);
+
+ interval->interval.numerator = 1;
+ interval->interval.denominator = fps;
mutex_unlock(&sensor->mutex);
@@ -2777,41 +2770,6 @@ static int ov8865_enum_frame_size(struct v4l2_subdev *subdev,
return 0;
}
-static int ov8865_enum_frame_interval(struct v4l2_subdev *subdev,
- struct v4l2_subdev_state *sd_state,
- struct v4l2_subdev_frame_interval_enum *interval_enum)
-{
- const struct ov8865_mode *mode = NULL;
- unsigned int mode_index;
- unsigned int interval_index;
-
- if (interval_enum->index > 0)
- return -EINVAL;
- /*
- * Multiple modes with the same dimensions may have different frame
- * intervals, so look up each relevant mode.
- */
- for (mode_index = 0, interval_index = 0;
- mode_index < ARRAY_SIZE(ov8865_modes); mode_index++) {
- mode = &ov8865_modes[mode_index];
-
- if (mode->output_size_x == interval_enum->width &&
- mode->output_size_y == interval_enum->height) {
- if (interval_index == interval_enum->index)
- break;
-
- interval_index++;
- }
- }
-
- if (mode_index == ARRAY_SIZE(ov8865_modes))
- return -EINVAL;
-
- interval_enum->interval = mode->frame_interval;
-
- return 0;
-}
-
static void
__ov8865_get_pad_crop(struct ov8865_sensor *sensor,
struct v4l2_subdev_state *state, unsigned int pad,
@@ -2870,7 +2828,6 @@ static const struct v4l2_subdev_pad_ops ov8865_subdev_pad_ops = {
.get_fmt = ov8865_get_fmt,
.set_fmt = ov8865_set_fmt,
.enum_frame_size = ov8865_enum_frame_size,
- .enum_frame_interval = ov8865_enum_frame_interval,
.get_selection = ov8865_get_selection,
.set_selection = ov8865_get_selection,
};
The HTS values for some of the modes in the ov8865 driver are a bit unusual, coming in lower than the output_size_x is set to. It seems like they might be calculated to fit the desired framerate into a configuration with just two data lanes. To bring this more in line with expected behaviour, raise the HTS values above the output_size_x. The corollary of that change is that the hardcoded frame intervals against the modes no longer make sense, so remove those entirely. Update the .g/s_frame_interval() callbacks to calculate the frame interval based on the current mode and the vblank and hblank settings plus the number of data lanes detected from firmware. The implementation of the .enum_frame_interval() callback is no longer suitable since the possible frame rate is now a continuous range depending on the vblank control setting, so remove that callback entirely. Signed-off-by: Daniel Scally <djrscally@gmail.com> --- Changes in v3: - Patch introduced drivers/media/i2c/ov8865.c | 65 +++++++------------------------------- 1 file changed, 11 insertions(+), 54 deletions(-)