diff mbox series

[v3,3/4] arm64: dts: qcom: apq8016-sbc: Remove clock-lanes property from &camss node

Message ID 20211118124819.1902427-4-robert.foss@linaro.org (mailing list archive)
State New, archived
Headers show
Series Remove clock-lanes DT property from CAMSS | expand

Commit Message

Robert Foss Nov. 18, 2021, 12:48 p.m. UTC
The clock-lanes property is no longer used as it is not programmable by
the CSIPHY hardware block of Qcom ISPs and should be removed.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 --
 1 file changed, 2 deletions(-)

Comments

Bjorn Andersson Dec. 6, 2021, 3:06 p.m. UTC | #1
On Thu 18 Nov 04:48 PST 2021, Robert Foss wrote:

> The clock-lanes property is no longer used as it is not programmable by
> the CSIPHY hardware block of Qcom ISPs and should be removed.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Although I'd be happy to take the two dts patches through the Qualcomm
tree, once the driver changes has landed.

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> index a5320d6d30e7..b7a578aafcbb 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> @@ -253,7 +253,6 @@ ports {
>  		port@0 {
>  			reg = <0>;
>  			csiphy0_ep: endpoint {
> -				clock-lanes = <1>;
>  				data-lanes = <0 2>;
>  				remote-endpoint = <&ov5640_ep>;
>  				status = "okay";
> @@ -289,7 +288,6 @@ camera_rear@3b {
>  
>  		port {
>  			ov5640_ep: endpoint {
> -				clock-lanes = <1>;
>  				data-lanes = <0 2>;
>  				remote-endpoint = <&csiphy0_ep>;
>  			};
> -- 
> 2.32.0
>
Robert Foss Dec. 6, 2021, 3:13 p.m. UTC | #2
On Mon, 6 Dec 2021 at 16:05, Bjorn Andersson <bjorn.andersson@linaro.org> wrote:
>
> On Thu 18 Nov 04:48 PST 2021, Robert Foss wrote:
>
> > The clock-lanes property is no longer used as it is not programmable by
> > the CSIPHY hardware block of Qcom ISPs and should be removed.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Although I'd be happy to take the two dts patches through the Qualcomm
> tree, once the driver changes has landed.

Thanks Bjorn. I'll split the series and submit two fully reviewed v4 series.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index a5320d6d30e7..b7a578aafcbb 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -253,7 +253,6 @@  ports {
 		port@0 {
 			reg = <0>;
 			csiphy0_ep: endpoint {
-				clock-lanes = <1>;
 				data-lanes = <0 2>;
 				remote-endpoint = <&ov5640_ep>;
 				status = "okay";
@@ -289,7 +288,6 @@  camera_rear@3b {
 
 		port {
 			ov5640_ep: endpoint {
-				clock-lanes = <1>;
 				data-lanes = <0 2>;
 				remote-endpoint = <&csiphy0_ep>;
 			};