@@ -1197,6 +1197,47 @@ gpu_2d: gpu@38008000 {
power-domains = <&pgc_gpu>;
};
+ vpu_g1: video-codec@38300000 {
+ compatible = "nxp,imx8mm-vpu";
+ reg = <0x38300000 0x10000>;
+ reg-names = "g1";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "g1";
+ clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+ <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+ clock-names = "g1", "bus";
+ assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+ <&clk IMX8MM_CLK_VPU_BUS>,
+ <&clk IMX8MM_VPU_PLL_BYPASS>;
+ assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+ <&clk IMX8MM_SYS_PLL1_800M>,
+ <&clk IMX8MM_VPU_PLL>;
+ assigned-clock-rates = <600000000>,
+ <800000000>,
+ <0>;
+ power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+ };
+
+ vpu_g2: video-codec@38310000 {
+ compatible = "nxp,imx8mm-vpu-g2";
+ reg = <0x38310000 0x10000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "g2";
+ clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+ <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+ clock-names = "g2", "bus";
+ assigned-clocks = <&clk IMX8MM_CLK_VPU_G2>,
+ <&clk IMX8MM_CLK_VPU_BUS>,
+ <&clk IMX8MM_VPU_PLL_BYPASS>;
+ assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+ <&clk IMX8MM_SYS_PLL1_800M>,
+ <&clk IMX8MM_VPU_PLL>;
+ assigned-clock-rates = <600000000>,
+ <800000000>,
+ <0>;
+ power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+ };
+
vpu_blk_ctrl: blk-ctrl@38330000 {
compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
reg = <0x38330000 0x100>;
Enable two hardware Hantro decoders called G1 and G2. Signed-off-by: Adam Ford <aford173@gmail.com>