diff mbox series

[V2,04/10] dt-bindings: media: nxp,imx8mq-vpu: Split G1 and G2 nodes

Message ID 20211216111256.2362683-5-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series media: hantro: imx8mq/imx8mm: Let VPU decoders get controlled by vpu-blk-ctrl | expand

Commit Message

Adam Ford Dec. 16, 2021, 11:12 a.m. UTC
The G1 and G2 are separate decoder blocks that are enabled by the
vpu-blk-ctrl power-domain controller, which now has a proper driver.
Update the bindings to support separate nodes for the G1 and G2
decoders with vpu-blk-ctrl power-domain support.

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Rob Herring (Arm) Dec. 16, 2021, 1:53 p.m. UTC | #1
On Thu, 16 Dec 2021 05:12:49 -0600, Adam Ford wrote:
> The G1 and G2 are separate decoder blocks that are enabled by the
> vpu-blk-ctrl power-domain controller, which now has a proper driver.
> Update the bindings to support separate nodes for the G1 and G2
> decoders with vpu-blk-ctrl power-domain support.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml:18:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
./Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml:19:7: [warning] wrong indentation: expected 7 but found 6 (indentation)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1569050

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring (Arm) Dec. 16, 2021, 5:29 p.m. UTC | #2
On Thu, Dec 16, 2021 at 05:12:49AM -0600, Adam Ford wrote:
> The G1 and G2 are separate decoder blocks that are enabled by the
> vpu-blk-ctrl power-domain controller, which now has a proper driver.
> Update the bindings to support separate nodes for the G1 and G2
> decoders with vpu-blk-ctrl power-domain support.

You could expand this a bit more with Lucas' explanation and being 
explicit on the compatibility implications.

Otherwise, with that and indentation fixed:

Reviewed-by: Rob Herring <robh@kernel.org>

> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
> index 762be3f96ce9..c1e157251de7 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
> @@ -15,33 +15,20 @@ description:
>  
>  properties:
>    compatible:
> -    const: nxp,imx8mq-vpu
> +     oneOf:
> +      - const: nxp,imx8mq-vpu
> +        deprecated: true
> +      - const: nxp,imx8mq-vpu-g1
> +      - const: nxp,imx8mq-vpu-g2
>  
>    reg:
> -    maxItems: 3
> -
> -  reg-names:
> -    items:
> -      - const: g1
> -      - const: g2
> -      - const: ctrl
> +    maxItems: 1
>  
>    interrupts:
> -    maxItems: 2
> -
> -  interrupt-names:
> -    items:
> -      - const: g1
> -      - const: g2
> +    maxItems: 1
>  
>    clocks:
> -    maxItems: 3
> -
> -  clock-names:
> -    items:
> -      - const: g1
> -      - const: g2
> -      - const: bus
> +    maxItems: 1
>  
>    power-domains:
>      maxItems: 1
> @@ -49,31 +36,33 @@ properties:
>  required:
>    - compatible
>    - reg
> -  - reg-names
>    - interrupts
> -  - interrupt-names
>    - clocks
> -  - clock-names
>  
>  additionalProperties: false
>  
>  examples:
>    - |
>          #include <dt-bindings/clock/imx8mq-clock.h>
> +        #include <dt-bindings/power/imx8mq-power.h>
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +        vpu_g1: video-codec@38300000 {
> +                compatible = "nxp,imx8mq-vpu-g1";
> +                reg = <0x38300000 0x10000>;
> +                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
> +                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
> +        };
> +  - |
> +        #include <dt-bindings/clock/imx8mq-clock.h>
> +        #include <dt-bindings/power/imx8mq-power.h>
>          #include <dt-bindings/interrupt-controller/arm-gic.h>
>  
> -        vpu: video-codec@38300000 {
> -                compatible = "nxp,imx8mq-vpu";
> -                reg = <0x38300000 0x10000>,
> -                      <0x38310000 0x10000>,
> -                      <0x38320000 0x10000>;
> -                reg-names = "g1", "g2", "ctrl";
> -                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> -                             <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> -                interrupt-names = "g1", "g2";
> -                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> -                         <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> -                         <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> -                clock-names = "g1", "g2", "bus";
> -                power-domains = <&pgc_vpu>;
> +        vpu_g2: video-codec@38300000 {
> +                compatible = "nxp,imx8mq-vpu-g2";
> +                reg = <0x38310000 0x10000>;
> +                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> +                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
>          };
> -- 
> 2.32.0
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
index 762be3f96ce9..c1e157251de7 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
@@ -15,33 +15,20 @@  description:
 
 properties:
   compatible:
-    const: nxp,imx8mq-vpu
+     oneOf:
+      - const: nxp,imx8mq-vpu
+        deprecated: true
+      - const: nxp,imx8mq-vpu-g1
+      - const: nxp,imx8mq-vpu-g2
 
   reg:
-    maxItems: 3
-
-  reg-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: ctrl
+    maxItems: 1
 
   interrupts:
-    maxItems: 2
-
-  interrupt-names:
-    items:
-      - const: g1
-      - const: g2
+    maxItems: 1
 
   clocks:
-    maxItems: 3
-
-  clock-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: bus
+    maxItems: 1
 
   power-domains:
     maxItems: 1
@@ -49,31 +36,33 @@  properties:
 required:
   - compatible
   - reg
-  - reg-names
   - interrupts
-  - interrupt-names
   - clocks
-  - clock-names
 
 additionalProperties: false
 
 examples:
   - |
         #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        vpu_g1: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g1";
+                reg = <0x38300000 0x10000>;
+                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+        };
+  - |
+        #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
         #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        vpu: video-codec@38300000 {
-                compatible = "nxp,imx8mq-vpu";
-                reg = <0x38300000 0x10000>,
-                      <0x38310000 0x10000>,
-                      <0x38320000 0x10000>;
-                reg-names = "g1", "g2", "ctrl";
-                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-                             <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-                interrupt-names = "g1", "g2";
-                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
-                         <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
-                         <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
-                clock-names = "g1", "g2", "bus";
-                power-domains = <&pgc_vpu>;
+        vpu_g2: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g2";
+                reg = <0x38310000 0x10000>;
+                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
         };