Message ID | 20211217095403.2618-3-jammy_huang@aspeedtech.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Correct timing report | expand |
On Fri, 17 Dec 2021 at 09:53, Jammy Huang <jammy_huang@aspeedtech.com> wrote: > > Use the bitfield macro FIELD_GET, and GENMASK to do the shift and mask in > one go for reg values. > > Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> > --- > drivers/media/platform/aspeed-video.c | 35 ++++++++++++--------------- > 1 file changed, 16 insertions(+), 19 deletions(-) > > diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c > index d5f77b205175..581a4261f9b7 100644 > --- a/drivers/media/platform/aspeed-video.c > +++ b/drivers/media/platform/aspeed-video.c > @@ -156,26 +156,22 @@ > #define VE_SRC_LR_EDGE_DET_NO_H BIT(13) > #define VE_SRC_LR_EDGE_DET_NO_DISP BIT(14) > #define VE_SRC_LR_EDGE_DET_NO_CLK BIT(15) > -#define VE_SRC_LR_EDGE_DET_RT_SHF 16 > -#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, VE_SRC_LR_EDGE_DET_RT_SHF) > +#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, 16) > #define VE_SRC_LR_EDGE_DET_INTERLACE BIT(31) > > #define VE_SRC_TB_EDGE_DET 0x094 > #define VE_SRC_TB_EDGE_DET_TOP GENMASK(12, 0) > -#define VE_SRC_TB_EDGE_DET_BOT_SHF 16 > -#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF) > +#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, 16) > > #define VE_MODE_DETECT_STATUS 0x098 > #define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0) > -#define VE_MODE_DETECT_V_LINES_SHF 16 > -#define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF) > +#define VE_MODE_DETECT_V_LINES GENMASK(27, 16) > #define VE_MODE_DETECT_STATUS_VSYNC BIT(28) > #define VE_MODE_DETECT_STATUS_HSYNC BIT(29) > > #define VE_SYNC_STATUS 0x09c > #define VE_SYNC_STATUS_HSYNC GENMASK(11, 0) > -#define VE_SYNC_STATUS_VSYNC_SHF 16 > -#define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF) > +#define VE_SYNC_STATUS_VSYNC GENMASK(27, 16) > > #define VE_H_TOTAL_PIXELS 0x0A0 > > @@ -988,23 +984,24 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) > sync = aspeed_video_read(video, VE_SYNC_STATUS); > htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS); > > - video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >> > - VE_SRC_TB_EDGE_DET_BOT_SHF; > - video->frame_top = src_tb_edge & VE_SRC_TB_EDGE_DET_TOP; > + video->frame_bottom = FIELD_GET(VE_SRC_TB_EDGE_DET_BOT, > + src_tb_edge); > + video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP, > + src_tb_edge); > det->vfrontporch = video->frame_top; > - det->vbackporch = ((mds & VE_MODE_DETECT_V_LINES) >> > - VE_MODE_DETECT_V_LINES_SHF) - video->frame_bottom; > - det->vsync = (sync & VE_SYNC_STATUS_VSYNC) >> > - VE_SYNC_STATUS_VSYNC_SHF; > + det->vbackporch = FIELD_GET(VE_MODE_DETECT_V_LINES, mds) - > + video->frame_bottom; > + det->vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync); > if (video->frame_top > video->frame_bottom) > continue; > > - video->frame_right = (src_lr_edge & VE_SRC_LR_EDGE_DET_RT) >> > - VE_SRC_LR_EDGE_DET_RT_SHF; > - video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT; > + video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, > + src_lr_edge); > + video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, > + src_lr_edge); I suggest putting these on one line to further improve readability: video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, src_lr_edge); video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, src_lr_edge); The same for the other lines you've changed above. And then add: Reviewed-by: Joel Stanley <joel@jms.id.au> > det->hfrontporch = video->frame_left; > det->hbackporch = htotal - video->frame_right; > - det->hsync = sync & VE_SYNC_STATUS_HSYNC; > + det->hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync); > if (video->frame_left > video->frame_right) > continue; > > -- > 2.25.1 >
Hi Joel, OK, I will update in next patch as you advised. Thanks for your review. On 2021/12/22 上午 08:59, Joel Stanley wrote: > On Fri, 17 Dec 2021 at 09:53, Jammy Huang <jammy_huang@aspeedtech.com> wrote: >> Use the bitfield macro FIELD_GET, and GENMASK to do the shift and mask in >> one go for reg values. >> >> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> >> --- >> drivers/media/platform/aspeed-video.c | 35 ++++++++++++--------------- >> 1 file changed, 16 insertions(+), 19 deletions(-) >> >> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c >> index d5f77b205175..581a4261f9b7 100644 >> --- a/drivers/media/platform/aspeed-video.c >> +++ b/drivers/media/platform/aspeed-video.c >> @@ -156,26 +156,22 @@ >> #define VE_SRC_LR_EDGE_DET_NO_H BIT(13) >> #define VE_SRC_LR_EDGE_DET_NO_DISP BIT(14) >> #define VE_SRC_LR_EDGE_DET_NO_CLK BIT(15) >> -#define VE_SRC_LR_EDGE_DET_RT_SHF 16 >> -#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, VE_SRC_LR_EDGE_DET_RT_SHF) >> +#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, 16) >> #define VE_SRC_LR_EDGE_DET_INTERLACE BIT(31) >> >> #define VE_SRC_TB_EDGE_DET 0x094 >> #define VE_SRC_TB_EDGE_DET_TOP GENMASK(12, 0) >> -#define VE_SRC_TB_EDGE_DET_BOT_SHF 16 >> -#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF) >> +#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, 16) >> >> #define VE_MODE_DETECT_STATUS 0x098 >> #define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0) >> -#define VE_MODE_DETECT_V_LINES_SHF 16 >> -#define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF) >> +#define VE_MODE_DETECT_V_LINES GENMASK(27, 16) >> #define VE_MODE_DETECT_STATUS_VSYNC BIT(28) >> #define VE_MODE_DETECT_STATUS_HSYNC BIT(29) >> >> #define VE_SYNC_STATUS 0x09c >> #define VE_SYNC_STATUS_HSYNC GENMASK(11, 0) >> -#define VE_SYNC_STATUS_VSYNC_SHF 16 >> -#define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF) >> +#define VE_SYNC_STATUS_VSYNC GENMASK(27, 16) >> >> #define VE_H_TOTAL_PIXELS 0x0A0 >> >> @@ -988,23 +984,24 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) >> sync = aspeed_video_read(video, VE_SYNC_STATUS); >> htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS); >> >> - video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >> >> - VE_SRC_TB_EDGE_DET_BOT_SHF; >> - video->frame_top = src_tb_edge & VE_SRC_TB_EDGE_DET_TOP; >> + video->frame_bottom = FIELD_GET(VE_SRC_TB_EDGE_DET_BOT, >> + src_tb_edge); >> + video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP, >> + src_tb_edge); >> det->vfrontporch = video->frame_top; >> - det->vbackporch = ((mds & VE_MODE_DETECT_V_LINES) >> >> - VE_MODE_DETECT_V_LINES_SHF) - video->frame_bottom; >> - det->vsync = (sync & VE_SYNC_STATUS_VSYNC) >> >> - VE_SYNC_STATUS_VSYNC_SHF; >> + det->vbackporch = FIELD_GET(VE_MODE_DETECT_V_LINES, mds) - >> + video->frame_bottom; >> + det->vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync); >> if (video->frame_top > video->frame_bottom) >> continue; >> >> - video->frame_right = (src_lr_edge & VE_SRC_LR_EDGE_DET_RT) >> >> - VE_SRC_LR_EDGE_DET_RT_SHF; >> - video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT; >> + video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, >> + src_lr_edge); >> + video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, >> + src_lr_edge); > I suggest putting these on one line to further improve readability: > > video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, > src_lr_edge); > video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, > src_lr_edge); > > The same for the other lines you've changed above. > > And then add: > > Reviewed-by: Joel Stanley <joel@jms.id.au> > >> det->hfrontporch = video->frame_left; >> det->hbackporch = htotal - video->frame_right; >> - det->hsync = sync & VE_SYNC_STATUS_HSYNC; >> + det->hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync); >> if (video->frame_left > video->frame_right) >> continue; >> >> -- >> 2.25.1 >>
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c index d5f77b205175..581a4261f9b7 100644 --- a/drivers/media/platform/aspeed-video.c +++ b/drivers/media/platform/aspeed-video.c @@ -156,26 +156,22 @@ #define VE_SRC_LR_EDGE_DET_NO_H BIT(13) #define VE_SRC_LR_EDGE_DET_NO_DISP BIT(14) #define VE_SRC_LR_EDGE_DET_NO_CLK BIT(15) -#define VE_SRC_LR_EDGE_DET_RT_SHF 16 -#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, VE_SRC_LR_EDGE_DET_RT_SHF) +#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, 16) #define VE_SRC_LR_EDGE_DET_INTERLACE BIT(31) #define VE_SRC_TB_EDGE_DET 0x094 #define VE_SRC_TB_EDGE_DET_TOP GENMASK(12, 0) -#define VE_SRC_TB_EDGE_DET_BOT_SHF 16 -#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF) +#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, 16) #define VE_MODE_DETECT_STATUS 0x098 #define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0) -#define VE_MODE_DETECT_V_LINES_SHF 16 -#define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF) +#define VE_MODE_DETECT_V_LINES GENMASK(27, 16) #define VE_MODE_DETECT_STATUS_VSYNC BIT(28) #define VE_MODE_DETECT_STATUS_HSYNC BIT(29) #define VE_SYNC_STATUS 0x09c #define VE_SYNC_STATUS_HSYNC GENMASK(11, 0) -#define VE_SYNC_STATUS_VSYNC_SHF 16 -#define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF) +#define VE_SYNC_STATUS_VSYNC GENMASK(27, 16) #define VE_H_TOTAL_PIXELS 0x0A0 @@ -988,23 +984,24 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) sync = aspeed_video_read(video, VE_SYNC_STATUS); htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS); - video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >> - VE_SRC_TB_EDGE_DET_BOT_SHF; - video->frame_top = src_tb_edge & VE_SRC_TB_EDGE_DET_TOP; + video->frame_bottom = FIELD_GET(VE_SRC_TB_EDGE_DET_BOT, + src_tb_edge); + video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP, + src_tb_edge); det->vfrontporch = video->frame_top; - det->vbackporch = ((mds & VE_MODE_DETECT_V_LINES) >> - VE_MODE_DETECT_V_LINES_SHF) - video->frame_bottom; - det->vsync = (sync & VE_SYNC_STATUS_VSYNC) >> - VE_SYNC_STATUS_VSYNC_SHF; + det->vbackporch = FIELD_GET(VE_MODE_DETECT_V_LINES, mds) - + video->frame_bottom; + det->vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync); if (video->frame_top > video->frame_bottom) continue; - video->frame_right = (src_lr_edge & VE_SRC_LR_EDGE_DET_RT) >> - VE_SRC_LR_EDGE_DET_RT_SHF; - video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT; + video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, + src_lr_edge); + video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, + src_lr_edge); det->hfrontporch = video->frame_left; det->hbackporch = htotal - video->frame_right; - det->hsync = sync & VE_SYNC_STATUS_HSYNC; + det->hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync); if (video->frame_left > video->frame_right) continue;
Use the bitfield macro FIELD_GET, and GENMASK to do the shift and mask in one go for reg values. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> --- drivers/media/platform/aspeed-video.c | 35 ++++++++++++--------------- 1 file changed, 16 insertions(+), 19 deletions(-)