@@ -311,6 +311,9 @@ struct vdec_pic_info {
* @q_mutex: src & dst vb2_queue mutex
* @enc_idx: used to record encoded frame count
* @core_id: used to reoord used core
+ * @pfrm_buf: used to store current ctx's frame buffer
+ * @pbs_buf: used to store current ctx's bitstream buffer
+ * @hdr_size: used to store prepend header size
*/
struct mtk_vcodec_ctx {
enum mtk_instance_type type;
@@ -363,6 +366,9 @@ struct mtk_vcodec_ctx {
struct mutex q_mutex;
int enc_idx;
int core_id;
+ struct vb2_v4l2_buffer *pfrm_buf[MTK_VENC_CORE_MAX];
+ struct vb2_v4l2_buffer *pbs_buf[MTK_VENC_CORE_MAX];
+ unsigned int hdr_size;
};
/*
@@ -924,6 +924,8 @@ static void vb2ops_venc_stop_streaming(struct vb2_queue *q)
mtk_v4l2_debug(2, "[%d]-> type=%d", ctx->id, q->type);
+ mtk_venc_lock_all(ctx);
+
if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
while ((dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx))) {
vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
@@ -1103,10 +1105,13 @@ static int mtk_venc_param_change(struct mtk_vcodec_ctx *ctx)
ctx->id,
vb2_v4l2->vb2_buf.index,
mtk_buf->enc_params.force_intra);
- if (mtk_buf->enc_params.force_intra)
+ if (mtk_buf->enc_params.force_intra) {
ret |= venc_if_set_param(ctx,
VENC_SET_PARAM_FORCE_INTRA,
NULL);
+
+ ctx->enc_idx = 0;
+ }
}
mtk_buf->param_change = MTK_ENCODE_PARAM_NONE;
@@ -1157,6 +1162,7 @@ static void mtk_venc_worker(struct work_struct *work)
* is dequeued.
*/
if (src_buf == &ctx->empty_flush_buf.vb) {
+ mtk_venc_lock_all(ctx);
vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
dst_buf->flags |= V4L2_BUF_FLAG_LAST;
v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
@@ -1171,9 +1177,12 @@ static void mtk_venc_worker(struct work_struct *work)
frm_buf.fb_addr[i].size =
(size_t)src_buf->vb2_buf.planes[i].length;
}
+ frm_buf.src_addr = src_buf;
+
bs_buf.va = vb2_plane_vaddr(&dst_buf->vb2_buf, 0);
bs_buf.dma_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
bs_buf.size = (size_t)dst_buf->vb2_buf.planes[0].length;
+ bs_buf.buf = dst_buf;
mtk_v4l2_debug(2,
"Framebuf PA=%llx Size=0x%zx;PA=0x%llx Size=0x%zx;PA=0x%llx Size=%zu",
@@ -1220,6 +1229,8 @@ static void m2mops_venc_device_run(void *priv)
{
struct mtk_vcodec_ctx *ctx = priv;
+ mtk_venc_param_change(ctx);
+
if ((ctx->q_data[MTK_Q_DATA_DST].fmt->fourcc == V4L2_PIX_FMT_H264) &&
(ctx->state != MTK_STATE_HEADER)) {
/* encode h264 sps/pps header */
@@ -1228,7 +1239,6 @@ static void m2mops_venc_device_run(void *priv)
return;
}
- mtk_venc_param_change(ctx);
queue_work(ctx->dev->encode_workqueue, &ctx->encode_work);
}
@@ -1414,6 +1424,34 @@ int mtk_vcodec_enc_queue_init(void *priv, struct vb2_queue *src_vq,
return vb2_queue_init(dst_vq);
}
+void mtk_venc_buf_done(struct mtk_vcodec_ctx *ctx, int core_id,
+ unsigned int bs_size, bool time_out, bool key_frame)
+{
+ struct vb2_v4l2_buffer *src_vb2_v4l2 = NULL;
+ struct vb2_v4l2_buffer *dst_vb2_v4l2 = NULL;
+
+ /*
+ * the frm_buf(src_buf) and bs_buf(dst_buf) can be obtained from ctx,
+ * then put them to done list, user can get them by dqbuf call
+ */
+ src_vb2_v4l2 = ctx->pfrm_buf[core_id];
+ dst_vb2_v4l2 = ctx->pbs_buf[core_id];
+
+ if (src_vb2_v4l2 && dst_vb2_v4l2) {
+ dst_vb2_v4l2->vb2_buf.timestamp =
+ src_vb2_v4l2->vb2_buf.timestamp;
+ dst_vb2_v4l2->timecode = src_vb2_v4l2->timecode;
+
+ if (key_frame)
+ dst_vb2_v4l2->flags |= V4L2_BUF_FLAG_KEYFRAME;
+
+ v4l2_m2m_buf_done(src_vb2_v4l2, VB2_BUF_STATE_DONE);
+ vb2_set_plane_payload(&dst_vb2_v4l2->vb2_buf, 0, bs_size);
+ v4l2_m2m_buf_done(dst_vb2_v4l2, VB2_BUF_STATE_DONE);
+ }
+}
+EXPORT_SYMBOL_GPL(mtk_venc_buf_done);
+
int mtk_venc_unlock(struct mtk_vcodec_ctx *ctx, int core_id)
{
struct mtk_vcodec_dev *dev = ctx->dev;
@@ -1441,3 +1479,25 @@ void mtk_vcodec_enc_release(struct mtk_vcodec_ctx *ctx)
ctx->state = MTK_STATE_FREE;
}
+
+void mtk_venc_lock_all(struct mtk_vcodec_ctx *ctx)
+{
+ unsigned int i;
+ struct mtk_vcodec_dev *dev = ctx->dev;
+
+ /*
+ * For frame-racing mode encoding, there are may be bufs being encoded
+ * when get the empty flush buffer or stop streaming, for example, the
+ * buffer with LAST flag will return to client before the encoding
+ * buffers, which will cause frame lost.
+ * The encoder device mutex will be locked during encoding process,
+ * when encode done, the mutex unlocked. So if all encoder device mutex
+ * can be locked, which means there are no bufs being encoded at this
+ * time, then the buffer with LAST flag can return to client properly.
+ */
+ for (i = 0; i < MTK_VENC_CORE_MAX; i++) {
+ mutex_lock(&dev->enc_mutex[i]);
+ mutex_unlock(&dev->enc_mutex[i]);
+ }
+}
+EXPORT_SYMBOL_GPL(mtk_venc_lock_all);
@@ -46,5 +46,8 @@ int mtk_vcodec_enc_queue_init(void *priv, struct vb2_queue *src_vq,
void mtk_vcodec_enc_release(struct mtk_vcodec_ctx *ctx);
int mtk_vcodec_enc_ctrls_setup(struct mtk_vcodec_ctx *ctx);
void mtk_vcodec_enc_set_default_params(struct mtk_vcodec_ctx *ctx);
+void mtk_venc_buf_done(struct mtk_vcodec_ctx *ctx, int core_id,
+ unsigned int bs_size, bool time_out, bool key_frame);
+void mtk_venc_lock_all(struct mtk_vcodec_ctx *ctx);
#endif /* _MTK_VCODEC_ENC_H_ */
@@ -14,6 +14,11 @@
#include "mtk_vcodec_enc.h"
#include "mtk_vcodec_enc_core.h"
#include "mtk_vcodec_enc_pm.h"
+#include "mtk_vcodec_intr.h"
+
+#define VENC_PIC_BITSTREAM_BYTE_CNT 0x0098
+#define VENC_PIC_FRM_TYPE 0x0010
+#define VENC_PIC_KEY_FRM 0x2
static const struct of_device_id mtk_venc_core_ids[] = {
{
@@ -47,6 +52,7 @@ static void clean_irq_status(unsigned int irq_status, void __iomem *addr)
if (irq_status & MTK_VENC_IRQ_STATUS_FRM)
writel(MTK_VENC_IRQ_STATUS_FRM, addr);
+
}
static irqreturn_t mtk_enc_core_irq_handler(int irq, void *priv)
@@ -55,6 +61,9 @@ static irqreturn_t mtk_enc_core_irq_handler(int irq, void *priv)
struct mtk_vcodec_ctx *ctx;
unsigned long flags;
void __iomem *addr;
+ unsigned int bs_size;
+ unsigned int frm_type;
+ bool is_key_frame = 0;
spin_lock_irqsave(&core->main_dev->irqlock, flags);
ctx = core->curr_ctx;
@@ -66,9 +75,25 @@ static irqreturn_t mtk_enc_core_irq_handler(int irq, void *priv)
addr = core->reg_base + MTK_VENC_IRQ_ACK_OFFSET;
ctx->irq_status = readl(core->reg_base + MTK_VENC_IRQ_STATUS_OFFSET);
+ bs_size = readl(core->reg_base + VENC_PIC_BITSTREAM_BYTE_CNT);
+ frm_type = readl(core->reg_base + VENC_PIC_FRM_TYPE);
clean_irq_status(ctx->irq_status, addr);
- wake_up_ctx(ctx, MTK_INST_IRQ_RECEIVED, 0);
+ if (ctx->irq_status & MTK_VENC_IRQ_STATUS_FRM) {
+ if (ctx->hdr_size != 0) {
+ bs_size += ctx->hdr_size;
+ ctx->hdr_size = 0;
+ }
+ if (frm_type & VENC_PIC_KEY_FRM)
+ is_key_frame = 1;
+
+ mtk_venc_buf_done(ctx, core->core_id, bs_size, 0, is_key_frame);
+ mtk_vcodec_enc_clock_off(core->main_dev, core->core_id);
+ mtk_venc_unlock(ctx, core->core_id);
+ } else {
+ wake_up_ctx(ctx, MTK_INST_IRQ_RECEIVED, 0);
+ }
+
return IRQ_HANDLED;
}
@@ -15,6 +15,7 @@ struct mtk_vcodec_mem {
size_t size;
void *va;
dma_addr_t dma_addr;
+ void *buf;
};
struct mtk_vcodec_fb {
@@ -558,6 +558,12 @@ static int h264_encode_frame(struct venc_h264_inst *inst,
return ret;
}
+ if (is_dual_core) {
+ ++inst->frm_cnt;
+ mtk_vcodec_debug(inst, "dual core : frm %d <-", inst->frm_cnt);
+ return ret;
+ }
+
irq_status = h264_enc_wait_venc_done(inst);
if (irq_status != MTK_VENC_IRQ_STATUS_FRM) {
mtk_vcodec_err(inst, "irq_status=%d failed", irq_status);
@@ -639,10 +645,12 @@ static int h264_enc_encode(void *handle,
int ret = 0;
struct venc_h264_inst *inst = (struct venc_h264_inst *)handle;
struct mtk_vcodec_ctx *ctx = inst->ctx;
+ bool is_single_core = (MTK_ENC_CORE_MODE(ctx) == VENC_SINGLE_CORE_MODE);
mtk_vcodec_debug(inst, "opt %d ->", opt);
- enable_irq(ctx->dev->enc_irq);
+ if (is_single_core)
+ enable_irq(ctx->dev->enc_irq);
switch (opt) {
case VENC_START_OPT_ENCODE_SEQUENCE_HEADER: {
@@ -666,6 +674,13 @@ static int h264_enc_encode(void *handle,
unsigned int bs_size_hdr;
unsigned int bs_size_frm;
+ /*
+ * the frm_buf and bs_buf need to be recorded into ctx,
+ * when encoding done, the target buffer can be obtained
+ */
+ ctx->pfrm_buf[ctx->core_id] = frm_buf->src_addr;
+ ctx->pbs_buf[ctx->core_id] = bs_buf->buf;
+
if (!inst->prepend_hdr) {
ret = h264_encode_frame(inst, frm_buf, bs_buf,
&result->bs_size, ctx->core_id);
@@ -702,6 +717,8 @@ static int h264_enc_encode(void *handle,
result->bs_size = hdr_sz + filler_sz + bs_size_frm;
+ ctx->hdr_size = hdr_sz + filler_sz;
+
mtk_vcodec_debug(inst, "hdr %d filler %d frame %d bs %d",
hdr_sz, filler_sz, bs_size_frm,
result->bs_size);
@@ -718,8 +735,9 @@ static int h264_enc_encode(void *handle,
}
encode_err:
+ if (is_single_core)
+ disable_irq(ctx->dev->enc_irq);
- disable_irq(ctx->dev->enc_irq);
mtk_vcodec_debug(inst, "opt %d <-", opt);
return ret;
@@ -108,9 +108,11 @@ struct venc_frame_info {
/*
* struct venc_frm_buf - frame buffer information used in venc_if_encode()
* @fb_addr: plane frame buffer addresses
+ * @src_addr: vb2_v4l2_buffer src buffer address
*/
struct venc_frm_buf {
struct mtk_vcodec_fb fb_addr[MTK_VCODEC_MAX_PLANES];
+ void *src_addr;
};
/*
When enable dual core mode encoding, the wait IRQ done synchronous function should not be called, so the encode result can't return to client in device_run. device_run called to trigger encoding process, finish it, so another scheduled job can be ran. When encoding done, done the encode result to client in IRQ handler. Signed-off-by: Irui Wang <irui.wang@mediatek.com> --- .../platform/mtk-vcodec/mtk_vcodec_drv.h | 6 ++ .../platform/mtk-vcodec/mtk_vcodec_enc.c | 64 ++++++++++++++++++- .../platform/mtk-vcodec/mtk_vcodec_enc.h | 3 + .../platform/mtk-vcodec/mtk_vcodec_enc_core.c | 27 +++++++- .../platform/mtk-vcodec/mtk_vcodec_util.h | 1 + .../platform/mtk-vcodec/venc/venc_h264_if.c | 22 ++++++- .../media/platform/mtk-vcodec/venc_drv_if.h | 2 + 7 files changed, 120 insertions(+), 5 deletions(-)