diff mbox series

[v5,6/9] media: uapi: Add a control for DW100 driver

Message ID 20220503093925.876640-7-xavier.roumegue@oss.nxp.com (mailing list archive)
State New, archived
Headers show
Series i.MX8MP DW100 dewarper driver | expand

Commit Message

Xavier Roumegue (OSS) May 3, 2022, 9:39 a.m. UTC 
The DW100 driver gets the dewarping mapping as a binary blob from the
userspace application through a custom control.
The blob format is hardware specific so create a dedicated control for
this purpose.

Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
---
 .../userspace-api/media/drivers/dw100.rst          | 13 +++++++++++++
 include/uapi/linux/dw100.h                         | 14 ++++++++++++++
 2 files changed, 27 insertions(+)
 create mode 100644 include/uapi/linux/dw100.h

Comments

Laurent Pinchart June 14, 2022, 9:07 p.m. UTC | #1 
Hi Xavier,

Thank you for the patch.

On Tue, May 03, 2022 at 11:39:22AM +0200, Xavier Roumegue wrote:
> The DW100 driver gets the dewarping mapping as a binary blob from the
> userspace application through a custom control.
> The blob format is hardware specific so create a dedicated control for
> this purpose.
> 
> Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  .../userspace-api/media/drivers/dw100.rst          | 13 +++++++++++++
>  include/uapi/linux/dw100.h                         | 14 ++++++++++++++
>  2 files changed, 27 insertions(+)
>  create mode 100644 include/uapi/linux/dw100.h
> 
> diff --git a/Documentation/userspace-api/media/drivers/dw100.rst b/Documentation/userspace-api/media/drivers/dw100.rst
> index 1e606459cf47..1ea727698ea1 100644
> --- a/Documentation/userspace-api/media/drivers/dw100.rst
> +++ b/Documentation/userspace-api/media/drivers/dw100.rst
> @@ -87,4 +87,17 @@ an identity map.
>  More details on the DW100 hardware operations can be found in
>  *chapter 13.15 DeWarp* of IMX8MP_ reference manual.
>  
> +The Vivante DW100 m2m driver implements the following driver-specific control:
> +
> +``V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (__u32 array)``
> +    Specifies to DW100 driver its dewarping map (aka LUT) blob as described in
> +    *chapter 13.15.2.3 Dewarping Remap* of IMX8MP_ reference manual as an U32
> +    dynamic array. The image is divided into many small 16x16 blocks. If the
> +    width/height of the image is not divisible by 16, the size of the
> +    rightmost/bottommost block is the remainder. The dewarping map only saves
> +    the vertex coordinates of the block. The dewarping grid map is comprised of
> +    vertex coordinates for x and y. Each x, y coordinate register uses 16 bits
> +    (UQ12.4) to record the coordinate address, with the Y coordinate in the
> +    upper bits and X in the lower bits.
> +
>  .. _IMX8MP: https://www.nxp.com/webapp/Download?colCode=IMX8MPRM
> diff --git a/include/uapi/linux/dw100.h b/include/uapi/linux/dw100.h
> new file mode 100644
> index 000000000000..3356496edd6b
> --- /dev/null
> +++ b/include/uapi/linux/dw100.h
> @@ -0,0 +1,14 @@
> +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
> +/* Copyright 2022 NXP */
> +
> +#ifndef __UAPI_DW100_H__
> +#define __UAPI_DW100_H__
> +
> +#include <linux/v4l2-controls.h>
> +
> +/*
> + * Check Documentation/userspace-api/media/drivers/dw100.rst for control details.
> + */
> +#define V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (V4L2_CID_USER_DW100_BASE + 1)
> +
> +#endif
diff mbox series

Patch

diff --git a/Documentation/userspace-api/media/drivers/dw100.rst b/Documentation/userspace-api/media/drivers/dw100.rst
index 1e606459cf47..1ea727698ea1 100644
--- a/Documentation/userspace-api/media/drivers/dw100.rst
+++ b/Documentation/userspace-api/media/drivers/dw100.rst
@@ -87,4 +87,17 @@  an identity map.
 More details on the DW100 hardware operations can be found in
 *chapter 13.15 DeWarp* of IMX8MP_ reference manual.
 
+The Vivante DW100 m2m driver implements the following driver-specific control:
+
+``V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (__u32 array)``
+    Specifies to DW100 driver its dewarping map (aka LUT) blob as described in
+    *chapter 13.15.2.3 Dewarping Remap* of IMX8MP_ reference manual as an U32
+    dynamic array. The image is divided into many small 16x16 blocks. If the
+    width/height of the image is not divisible by 16, the size of the
+    rightmost/bottommost block is the remainder. The dewarping map only saves
+    the vertex coordinates of the block. The dewarping grid map is comprised of
+    vertex coordinates for x and y. Each x, y coordinate register uses 16 bits
+    (UQ12.4) to record the coordinate address, with the Y coordinate in the
+    upper bits and X in the lower bits.
+
 .. _IMX8MP: https://www.nxp.com/webapp/Download?colCode=IMX8MPRM
diff --git a/include/uapi/linux/dw100.h b/include/uapi/linux/dw100.h
new file mode 100644
index 000000000000..3356496edd6b
--- /dev/null
+++ b/include/uapi/linux/dw100.h
@@ -0,0 +1,14 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+/* Copyright 2022 NXP */
+
+#ifndef __UAPI_DW100_H__
+#define __UAPI_DW100_H__
+
+#include <linux/v4l2-controls.h>
+
+/*
+ * Check Documentation/userspace-api/media/drivers/dw100.rst for control details.
+ */
+#define V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (V4L2_CID_USER_DW100_BASE + 1)
+
+#endif