@@ -55,6 +55,7 @@ struct vsp1_uif;
#define VSP1_HAS_HGT BIT(8)
#define VSP1_HAS_BRS BIT(9)
#define VSP1_HAS_EXT_DL BIT(10)
+#define VSP1_HAS_NON_ZERO_LBA BIT(11)
struct vsp1_device_info {
u32 version;
@@ -778,6 +778,7 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
}, {
.version = VI6_IP_VERSION_MODEL_VSPD_V3,
.model = "VSP2-D",
+ .soc = VI6_IP_VERSION_SOC_V3H,
.gen = 3,
.features = VSP1_HAS_BRS | VSP1_HAS_BRU,
.lif_count = 1,
@@ -785,6 +786,17 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.uif_count = 1,
.wpf_count = 1,
.num_bru_inputs = 5,
+ }, {
+ .version = VI6_IP_VERSION_MODEL_VSPD_V3,
+ .model = "VSP2-D",
+ .soc = VI6_IP_VERSION_SOC_V3M,
+ .gen = 3,
+ .features = VSP1_HAS_BRS | VSP1_HAS_BRU | VSP1_HAS_NON_ZERO_LBA,
+ .lif_count = 1,
+ .rpf_count = 5,
+ .uif_count = 1,
+ .wpf_count = 1,
+ .num_bru_inputs = 5,
}, {
.version = VI6_IP_VERSION_MODEL_VSPDL_GEN3,
.model = "VSP2-DL",
@@ -828,8 +840,12 @@ static const struct vsp1_device_info *vsp1_lookup_info(struct vsp1_device *vsp1)
for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) {
info = &vsp1_device_infos[i];
- if ((vsp1->version & VI6_IP_VERSION_MODEL_MASK) == info->version)
+ if ((vsp1->version & VI6_IP_VERSION_MODEL_MASK) == info->version) {
+ if (info->soc &&
+ ((vsp1->version & VI6_IP_VERSION_SOC_MASK) != info->soc))
+ continue;
return info;
+ }
}
dev_err(vsp1->dev, "unsupported IP version 0x%08x\n", vsp1->version);
@@ -135,8 +135,7 @@ static void lif_configure_stream(struct vsp1_entity *entity,
* may appear on the output). The value required by the manual is not
* explained but is likely a buffer size or threshold.
*/
- if ((entity->vsp1->version & VI6_IP_VERSION_MASK) ==
- (VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M))
+ if (vsp1_feature(entity->vsp1, VSP1_HAS_NON_ZERO_LBA))
vsp1_lif_write(lif, dlb, VI6_LIF_LBA,
VI6_LIF_LBA_LBA0 |
(1536 << VI6_LIF_LBA_LBA1_SHIFT));
As per HW manual V3M and RZ/G2L SoCs has nonzero LIF buffer attributes. So, introduce a feature bit for handling the same. This patch also adds separate device info structure for V3M and V3H SoCs, as both these SoCs share the same model ID, but V3H does not have VSP1_HAS_NON_ZERO_LBA feature bit. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v9->v10: * No change v8->v9: * Used generic check for matching SoCs with LBA feature. v8: * New patch --- drivers/media/platform/renesas/vsp1/vsp1.h | 1 + drivers/media/platform/renesas/vsp1/vsp1_drv.c | 18 +++++++++++++++++- drivers/media/platform/renesas/vsp1/vsp1_lif.c | 3 +-- 3 files changed, 19 insertions(+), 3 deletions(-)