diff mbox series

[v5,1/3] usb: gadget: add Aspeed ast2600 udc driver

Message ID 20220523030134.2977116-2-neal_liu@aspeedtech.com (mailing list archive)
State New
Headers show
Series add Aspeed udc driver for ast2600 | expand

Commit Message

Neal Liu May 23, 2022, 3:01 a.m. UTC
Aspeed udc is compliant with USB2.0, supports USB High Speed
and Full Speed, backward compatible with USB1.1.

Supports independent DMA channel for each generic endpoint.
Supports 32/256 stages descriptor mode for all generic endpoints.

This driver supports full functionality including single/multiple
stages descriptor mode, and exposes 1 UDC gadget driver.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
---
 MAINTAINERS                         |    7 +
 drivers/usb/gadget/udc/Kconfig      |   13 +
 drivers/usb/gadget/udc/Makefile     |    1 +
 drivers/usb/gadget/udc/aspeed_udc.c | 1596 +++++++++++++++++++++++++++
 4 files changed, 1617 insertions(+)
 create mode 100644 drivers/usb/gadget/udc/aspeed_udc.c

Comments

Neal Liu May 30, 2022, 1:27 a.m. UTC | #1
Gentle ping on this path, thanks.

> -----Original Message-----
> From: Neal Liu <neal_liu@aspeedtech.com>
> Sent: Monday, May 23, 2022 11:02 AM
> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Rob Herring
> <robh+dt@kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; Joel Stanley <joel@jms.id.au>; Andrew
> Jeffery <andrew@aj.id.au>; Felipe Balbi <balbi@kernel.org>; Sumit Semwal
> <sumit.semwal@linaro.org>; Christian K├Ânig <christian.koenig@amd.com>;
> Geert Uytterhoeven <geert@linux-m68k.org>; Li Yang <leoyang.li@nxp.com>
> Cc: Neal Liu <neal_liu@aspeedtech.com>; linux-aspeed@lists.ozlabs.org;
> linux-usb@vger.kernel.org; devicetree@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: [PATCH v5 1/3] usb: gadget: add Aspeed ast2600 udc driver
> 
> Aspeed udc is compliant with USB2.0, supports USB High Speed and Full Speed,
> backward compatible with USB1.1.
> 
> Supports independent DMA channel for each generic endpoint.
> Supports 32/256 stages descriptor mode for all generic endpoints.
> 
> This driver supports full functionality including single/multiple stages
> descriptor mode, and exposes 1 UDC gadget driver.
> 
> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
> ---
>  MAINTAINERS                         |    7 +
>  drivers/usb/gadget/udc/Kconfig      |   13 +
>  drivers/usb/gadget/udc/Makefile     |    1 +
>  drivers/usb/gadget/udc/aspeed_udc.c | 1596
> +++++++++++++++++++++++++++
>  4 files changed, 1617 insertions(+)
>  create mode 100644 drivers/usb/gadget/udc/aspeed_udc.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e8c52d0192a6..784d8d8e7b22 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3109,6 +3109,13 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/media/aspeed-video.txt
>  F:	drivers/media/platform/aspeed/
> 
> +ASPEED USB UDC DRIVER
> +M:	Neal Liu <neal_liu@aspeedtech.com>
> +L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/usb/aspeed,udc.yaml
> +F:	drivers/usb/gadget/udc/aspeed_udc.c
> +
>  ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
>  M:	Corentin Chary <corentin.chary@gmail.com>
>  L:	acpi4asus-user@lists.sourceforge.net
> diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
> index 69394dc1cdfb..03535f33511b 100644
> --- a/drivers/usb/gadget/udc/Kconfig
> +++ b/drivers/usb/gadget/udc/Kconfig
> @@ -463,6 +463,19 @@ config USB_TEGRA_XUDC
>  	 dynamically linked module called "tegra_xudc" and force all
>  	 gadget drivers to also be dynamically linked.
> 
> +config USB_ASPEED_UDC
> +	tristate "Aspeed UDC driver support"
> +	depends on ARCH_ASPEED || COMPILE_TEST
> +	depends on USB_LIBCOMPOSITE
> +	help
> +	  Enables Aspeed USB2.0 Device Controller driver for AST260x
> +	  family SoCs. The controller supports 1 control endpoint and
> +	  4 programmable endpoints.
> +
> +	  Say "y" to link the driver statically, or "m" to build a
> +	  dynamically linked module called "aspeed_udc" and force all
> +	  gadget drivers to also be dynamically linked.
> +
>  source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
> 
>  #
> diff --git a/drivers/usb/gadget/udc/Makefile
> b/drivers/usb/gadget/udc/Makefile index a21f2224e7eb..12f9e4c9eb0c
> 100644
> --- a/drivers/usb/gadget/udc/Makefile
> +++ b/drivers/usb/gadget/udc/Makefile
> @@ -40,5 +40,6 @@ obj-$(CONFIG_USB_GR_UDC)	+= gr_udc.o
>  obj-$(CONFIG_USB_GADGET_XILINX)	+= udc-xilinx.o
>  obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o
>  obj-$(CONFIG_USB_ASPEED_VHUB)	+= aspeed-vhub/
> +obj-$(CONFIG_USB_ASPEED_UDC)	+= aspeed_udc.o
>  obj-$(CONFIG_USB_BDC_UDC)	+= bdc/
>  obj-$(CONFIG_USB_MAX3420_UDC)	+= max3420_udc.o
> diff --git a/drivers/usb/gadget/udc/aspeed_udc.c
> b/drivers/usb/gadget/udc/aspeed_udc.c
> new file mode 100644
> index 000000000000..1fc15228ff15
> --- /dev/null
> +++ b/drivers/usb/gadget/udc/aspeed_udc.c
> @@ -0,0 +1,1596 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2021 Aspeed Technology Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/prefetch.h>
> +#include <linux/usb/ch9.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/slab.h>
> +
> +#define AST_UDC_NUM_ENDPOINTS		(1 + 4)
> +#define AST_UDC_EP0_MAX_PACKET		64	/* EP0's max packet size */
> +#define AST_UDC_EPn_MAX_PACKET		1024	/* Generic EPs max
> packet size */
> +#define AST_UDC_DESCS_COUNT		256	/* Use 256 stages descriptor
> mode (32/256) */
> +#define AST_UDC_DESC_MODE		1	/* Single/Multiple Stage(s)
> Descriptor Mode */
> +
> +#define AST_UDC_EP_DMA_SIZE		(AST_UDC_EPn_MAX_PACKET + 8 *
> AST_UDC_DESCS_COUNT)
> +
> +/*****************************
> + *                           *
> + * UDC register definitions  *
> + *                           *
> + *****************************/
> +
> +#define AST_UDC_FUNC_CTRL		0x00	/* Root Function Control &
> Status Register */
> +#define AST_UDC_CONFIG			0x04	/* Root Configuration Setting
> Register */
> +#define AST_UDC_IER			0x08	/* Interrupt Control Register */
> +#define AST_UDC_ISR			0x0C	/* Interrupt Status Register */
> +#define AST_UDC_EP_ACK_IER		0x10	/* Programmable ep Pool
> ACK Interrupt Enable Reg */
> +#define AST_UDC_EP_NAK_IER		0x14	/* Programmable ep Pool
> NAK Interrupt Enable Reg */
> +#define AST_UDC_EP_ACK_ISR		0x18	/* Programmable ep Pool
> ACK Interrupt Status Reg */
> +#define AST_UDC_EP_NAK_ISR		0x1C	/* Programmable ep Pool
> NAK Interrupt Status Reg */
> +#define AST_UDC_DEV_RESET		0x20	/* Device Controller Soft
> Reset Enable Register */
> +#define AST_UDC_STS			0x24	/* USB Status Register */
> +#define AST_VHUB_EP_DATA		0x28	/* Programmable ep Pool
> Data Toggle Value Set */
> +#define AST_VHUB_ISO_TX_FAIL		0x2C	/* Isochronous Transaction
> Fail Accumulator */
> +#define AST_UDC_EP0_CTRL		0x30	/* Endpoint 0 Control/Status
> Register */
> +#define AST_UDC_EP0_DATA_BUFF		0x34	/* Base Address of ep0
> IN/OUT Data Buffer Reg */
> +#define AST_UDC_SETUP0			0x80    /* Root Device Setup Data
> Buffer0 */
> +#define AST_UDC_SETUP1			0x84    /* Root Device Setup Data
> Buffer1 */
> +
> +
> +/* Main control reg */
> +#define USB_PHY_CLK_EN			BIT(31)
> +#define USB_FIFO_DYN_PWRD_EN		BIT(19)
> +#define USB_EP_LONG_DESC		BIT(18)
> +#define USB_BIST_TEST_PASS		BIT(13)
> +#define USB_BIST_TURN_ON		BIT(12)
> +#define USB_PHY_RESET_DIS		BIT(11)
> +#define USB_TEST_MODE(x)		((x) << 8)
> +#define USB_FORCE_TIMER_HS		BIT(7)
> +#define USB_FORCE_HS			BIT(6)
> +#define USB_REMOTE_WAKEUP_12MS		BIT(5)
> +#define USB_REMOTE_WAKEUP_EN		BIT(4)
> +#define USB_AUTO_REMOTE_WAKEUP_EN	BIT(3)
> +#define USB_STOP_CLK_IN_SUPEND		BIT(2)
> +#define USB_UPSTREAM_FS			BIT(1)
> +#define USB_UPSTREAM_EN			BIT(0)
> +
> +/* Main config reg */
> +#define UDC_CFG_SET_ADDR(x)		((x) & 0x3f)
> +#define UDC_CFG_ADDR_MASK		(0x3f)
> +
> +/* Interrupt ctrl & status reg */
> +#define UDC_IRQ_EP_POOL_NAK		BIT(17)
> +#define UDC_IRQ_EP_POOL_ACK_STALL	BIT(16)
> +#define UDC_IRQ_BUS_RESUME		BIT(8)
> +#define UDC_IRQ_BUS_SUSPEND		BIT(7)
> +#define UDC_IRQ_BUS_RESET		BIT(6)
> +#define UDC_IRQ_EP0_IN_DATA_NAK		BIT(4)
> +#define UDC_IRQ_EP0_IN_ACK_STALL	BIT(3)
> +#define UDC_IRQ_EP0_OUT_NAK		BIT(2)
> +#define UDC_IRQ_EP0_OUT_ACK_STALL	BIT(1)
> +#define UDC_IRQ_EP0_SETUP		BIT(0)
> +#define UDC_IRQ_ACK_ALL			(0x1ff)
> +
> +/* EP isr reg */
> +#define USB_EP3_ISR			BIT(3)
> +#define USB_EP2_ISR			BIT(2)
> +#define USB_EP1_ISR			BIT(1)
> +#define USB_EP0_ISR			BIT(0)
> +#define UDC_IRQ_EP_ACK_ALL		(0xf)
> +
> +/*Soft reset reg */
> +#define ROOT_UDC_SOFT_RESET		BIT(0)
> +
> +/* USB status reg */
> +#define UDC_STS_HIGHSPEED		BIT(27)
> +
> +/* Programmable EP data toggle */
> +#define EP_TOGGLE_SET_EPNUM(x)		((x) & 0x3)
> +
> +/* EP0 ctrl reg */
> +#define EP0_GET_RX_LEN(x)		((x >> 16) & 0x7f)
> +#define EP0_TX_LEN(x)			((x & 0x7f) << 8)
> +#define EP0_RX_BUFF_RDY			BIT(2)
> +#define EP0_TX_BUFF_RDY			BIT(1)
> +#define EP0_STALL			BIT(0)
> +
> +/*************************************
> + *                                   *
> + * per-endpoint register definitions *
> + *                                   *
> + *************************************/
> +
> +#define AST_UDC_EP_CONFIG		0x00	/* Endpoint Configuration
> Register */
> +#define AST_UDC_EP_DMA_CTRL		0x04	/* DMA Descriptor List
> Control/Status Register */
> +#define AST_UDC_EP_DMA_BUFF		0x08	/* DMA
> Descriptor/Buffer Base Address */
> +#define AST_UDC_EP_DMA_STS		0x0C	/* DMA Descriptor List R/W
> Pointer and Status */
> +
> +#define AST_UDC_EP_BASE			0x200
> +#define AST_UDC_EP_OFFSET		0x10
> +
> +/* EP config reg */
> +#define EP_SET_MAX_PKT(x)		((x & 0x3ff) << 16)
> +#define EP_DATA_FETCH_CTRL(x)		((x & 0x3) << 14)
> +#define EP_AUTO_DATA_DISABLE		(0x1 << 13)
> +#define EP_SET_EP_STALL			(0x1 << 12)
> +#define EP_SET_EP_NUM(x)		((x & 0xf) << 8)
> +#define EP_SET_TYPE_MASK(x)		((x) << 5)
> +#define EP_TYPE_BULK			(0x1)
> +#define EP_TYPE_INT			(0x2)
> +#define EP_TYPE_ISO			(0x3)
> +#define EP_DIR_OUT			(0x1 << 4)
> +#define EP_ALLOCATED_MASK		(0x7 << 1)
> +#define EP_ENABLE			BIT(0)
> +
> +/* EP DMA ctrl reg */
> +#define EP_DMA_CTRL_GET_PROC_STS(x)	((x >> 4) & 0xf)
> +#define EP_DMA_CTRL_STS_RX_IDLE		0x0
> +#define EP_DMA_CTRL_STS_TX_IDLE		0x8
> +#define EP_DMA_CTRL_IN_LONG_MODE	(0x1 << 3)
> +#define EP_DMA_CTRL_RESET		(0x1 << 2)
> +#define EP_DMA_SINGLE_STAGE		(0x1 << 1)
> +#define EP_DMA_DESC_MODE		(0x1 << 0)
> +
> +/* EP DMA status reg */
> +#define EP_DMA_SET_TX_SIZE(x)		((x & 0x7ff) << 16)
> +#define EP_DMA_GET_TX_SIZE(x)		(((x) >> 16) & 0x7ff)
> +#define EP_DMA_GET_RPTR(x)		(((x) >> 8) & 0xff)
> +#define EP_DMA_GET_WPTR(x)		((x) & 0xff)
> +#define EP_DMA_SINGLE_KICK		(1 << 0) /* WPTR = 1 for single mode
> */
> +
> +/* EP desc reg */
> +#define AST_EP_DMA_DESC_INTR_ENABLE	BIT(31)
> +#define AST_EP_DMA_DESC_PID_DATA0	(0 << 14)
> +#define AST_EP_DMA_DESC_PID_DATA2	BIT(14)
> +#define AST_EP_DMA_DESC_PID_DATA1	(2 << 14)
> +#define AST_EP_DMA_DESC_PID_MDATA	(3 << 14)
> +#define EP_DESC1_IN_LEN(x)		((x) & 0x1fff)
> +#define AST_EP_DMA_DESC_MAX_LEN		(7680) /* Max packet length
> for trasmit in 1 desc */
> +
> +struct ast_udc_request {
> +	struct usb_request	req;
> +	struct list_head	queue;
> +	unsigned		mapped:1;
> +	unsigned int		actual_dma_length;
> +	u32			saved_dma_wptr;
> +};
> +
> +#define to_ast_req(__req) container_of(__req, struct ast_udc_request,
> +req)
> +
> +struct ast_dma_desc {
> +	u32	des_0;
> +	u32	des_1;
> +};
> +
> +struct ast_udc_ep {
> +	struct usb_ep			ep;
> +
> +	/* Request queue */
> +	struct list_head		queue;
> +
> +	struct ast_udc_dev		*udc;
> +	void __iomem			*ep_reg;
> +	void				*epn_buf;
> +	dma_addr_t			epn_buf_dma;
> +	const struct usb_endpoint_descriptor	*desc;
> +
> +	/* DMA Descriptors */
> +	struct ast_dma_desc		*descs;
> +	dma_addr_t			descs_dma;
> +	u32				descs_wptr;
> +	u32				chunk_max;
> +
> +	bool				dir_in:1;
> +	unsigned			stopped:1;
> +	bool				desc_mode:1;
> +};
> +
> +#define to_ast_ep(__ep) container_of(__ep, struct ast_udc_ep, ep)
> +
> +struct ast_udc_dev {
> +	struct platform_device		*pdev;
> +	void __iomem			*reg;
> +	int				irq;
> +	spinlock_t			lock;
> +	struct clk			*clk;
> +	struct work_struct		wake_work;
> +
> +	/* EP0 DMA buffers allocated in one chunk */
> +	void				*ep0_buf;
> +	dma_addr_t			ep0_buf_dma;
> +	struct ast_udc_ep		ep[AST_UDC_NUM_ENDPOINTS];
> +
> +	struct usb_gadget		gadget;
> +	struct usb_gadget_driver	*driver;
> +	void __iomem			*creq;
> +	enum usb_device_state		suspended_from;
> +	int				desc_mode;
> +
> +	/* Force full speed only */
> +	bool				force_usb1:1;
> +	unsigned			is_control_tx:1;
> +	bool				wakeup_en:1;
> +};
> +
> +#define to_ast_dev(__g) container_of(__g, struct ast_udc_dev, gadget)
> +
> +static const char * const ast_ep_name[] = {
> +	"ep0", "ep1", "ep2", "ep3", "ep4"
> +};
> +
> +#ifdef AST_UDC_DEBUG_ALL
> +#define AST_UDC_DEBUG
> +#define AST_SETUP_DEBUG
> +#define AST_EP_DEBUG
> +#define AST_ISR_DEBUG
> +#endif
> +
> +#ifdef AST_SETUP_DEBUG
> +#define SETUP_DBG(u, fmt, ...)	\
> +	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__) #else
> +#define SETUP_DBG(u, fmt, ...) #endif
> +
> +#ifdef AST_EP_DEBUG
> +#define EP_DBG(e, fmt, ...)	\
> +	dev_dbg(&(e)->udc->pdev->dev, "%s():%s " fmt, __func__,	\
> +		 (e)->ep.name, ##__VA_ARGS__)
> +#else
> +#define EP_DBG(ep, fmt, ...)	((void)(ep))
> +#endif
> +
> +#ifdef AST_UDC_DEBUG
> +#define UDC_DBG(u, fmt, ...)	\
> +	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__) #else
> +#define UDC_DBG(u, fmt, ...) #endif
> +
> +#ifdef AST_ISR_DEBUG
> +#define ISR_DBG(u, fmt, ...)	\
> +	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__) #else
> +#define ISR_DBG(u, fmt, ...) #endif
> +
> +/*---------------------------------------------------------------------
> +----*/
> +#define ast_udc_read(udc, offset) \
> +	readl((udc)->reg + (offset))
> +#define ast_udc_write(udc, val, offset) \
> +	writel((val), (udc)->reg + (offset))
> +
> +#define ast_ep_read(ep, reg) \
> +	readl((ep)->ep_reg + (reg))
> +#define ast_ep_write(ep, val, reg) \
> +	writel((val), (ep)->ep_reg + (reg))
> +
> +/*---------------------------------------------------------------------
> +----*/
> +
> +static void ast_udc_done(struct ast_udc_ep *ep, struct ast_udc_request *req,
> +			 int status)
> +{
> +	struct ast_udc_dev *udc = ep->udc;
> +
> +	EP_DBG(ep, "req @%p, len (%d/%d), buf:0x%x, dir:0x%x\n",
> +	       req, req->req.actual, req->req.length,
> +	       (u32)req->req.buf, ep->dir_in);
> +
> +	list_del(&req->queue);
> +
> +	if (req->req.status == -EINPROGRESS)
> +		req->req.status = status;
> +	else
> +		status = req->req.status;
> +
> +	if (status && status != -ESHUTDOWN)
> +		EP_DBG(ep, "done req:%p, status:%d\n", req, status);
> +
> +	spin_unlock(&udc->lock);
> +	usb_gadget_giveback_request(&ep->ep, &req->req);
> +	spin_lock(&udc->lock);
> +}
> +
> +static void ast_udc_nuke(struct ast_udc_ep *ep, int status) {
> +	int count = 0;
> +
> +	while (!list_empty(&ep->queue)) {
> +		struct ast_udc_request *req;
> +
> +		req = list_entry(ep->queue.next, struct ast_udc_request,
> +				 queue);
> +		ast_udc_done(ep, req, status);
> +		count++;
> +	}
> +
> +	if (count)
> +		EP_DBG(ep, "Nuked %d request(s)\n", count); }
> +
> +/*
> + * Stop activity on all endpoints.
> + * Device controller for which EP activity is to be stopped.
> + *
> + * All the endpoints are stopped and any pending transfer requests if
> +any on
> + * the endpoint are terminated.
> + */
> +static void ast_udc_stop_activity(struct ast_udc_dev *udc) {
> +	struct ast_udc_ep *ep;
> +	int i;
> +
> +	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
> +		ep = &udc->ep[i];
> +		ep->stopped = 1;
> +		ast_udc_nuke(ep, -ESHUTDOWN);
> +	}
> +}
> +
> +static int ast_udc_ep_enable(struct usb_ep *_ep,
> +			     const struct usb_endpoint_descriptor *desc) {
> +	u16 maxpacket = usb_endpoint_maxp(desc);
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	u8 epnum = usb_endpoint_num(desc);
> +	unsigned long flags;
> +	u32 ep_conf = 0;
> +	u8 dir_in;
> +	u8 type;
> +
> +	if (!_ep || !ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT
> ||
> +	    maxpacket == 0 || maxpacket > ep->ep.maxpacket) {
> +		EP_DBG(ep, "Failed, invalid EP enable param\n");
> +		return -EINVAL;
> +	}
> +
> +	if (!udc->driver) {
> +		EP_DBG(ep, "bogus device state\n");
> +		return -ESHUTDOWN;
> +	}
> +
> +	EP_DBG(ep, "maxpacket:0x%x\n", maxpacket);
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	ep->desc = desc;
> +	ep->stopped = 0;
> +	ep->ep.maxpacket = maxpacket;
> +	ep->chunk_max = AST_EP_DMA_DESC_MAX_LEN;
> +
> +	if (maxpacket < AST_UDC_EPn_MAX_PACKET)
> +		ep_conf = EP_SET_MAX_PKT(maxpacket);
> +
> +	ep_conf |= EP_SET_EP_NUM(epnum);
> +
> +	type = usb_endpoint_type(desc);
> +	dir_in = usb_endpoint_dir_in(desc);
> +	ep->dir_in = dir_in;
> +	if (!ep->dir_in)
> +		ep_conf |= EP_DIR_OUT;
> +
> +	EP_DBG(ep, "type %d, dir_in %d\n", type, dir_in);
> +	switch (type) {
> +	case USB_ENDPOINT_XFER_ISOC:
> +		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_ISO);
> +		break;
> +
> +	case USB_ENDPOINT_XFER_BULK:
> +		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_BULK);
> +		break;
> +
> +	case USB_ENDPOINT_XFER_INT:
> +		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_INT);
> +		break;
> +	}
> +
> +	ep->desc_mode = udc->desc_mode && ep->descs_dma && ep->dir_in;
> +	if (ep->desc_mode) {
> +		ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL);
> +		ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS);
> +		ast_ep_write(ep, ep->descs_dma, AST_UDC_EP_DMA_BUFF);
> +
> +		/* Enable Long Descriptor Mode */
> +		ast_ep_write(ep, EP_DMA_CTRL_IN_LONG_MODE |
> EP_DMA_DESC_MODE,
> +			     AST_UDC_EP_DMA_CTRL);
> +
> +		ep->descs_wptr = 0;
> +
> +	} else {
> +		ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL);
> +		ast_ep_write(ep, EP_DMA_SINGLE_STAGE,
> AST_UDC_EP_DMA_CTRL);
> +		ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS);
> +	}
> +
> +	/* Cleanup data toggle just in case */
> +	ast_udc_write(udc, EP_TOGGLE_SET_EPNUM(epnum),
> AST_VHUB_EP_DATA);
> +
> +	/* Enable EP */
> +	ast_ep_write(ep, ep_conf | EP_ENABLE, AST_UDC_EP_CONFIG);
> +
> +	EP_DBG(ep, "ep_config: 0x%x\n", ast_ep_read(ep,
> AST_UDC_EP_CONFIG));
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int ast_udc_ep_disable(struct usb_ep *_ep) {
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	ep->ep.desc = NULL;
> +	ep->stopped = 1;
> +
> +	ast_udc_nuke(ep, -ESHUTDOWN);
> +	ast_ep_write(ep, 0, AST_UDC_EP_CONFIG);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static struct usb_request *ast_udc_ep_alloc_request(struct usb_ep *_ep,
> +						    gfp_t gfp_flags)
> +{
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_request *req;
> +
> +	req = kzalloc(sizeof(struct ast_udc_request), gfp_flags);
> +	if (!req) {
> +		EP_DBG(ep, "request allocation failed\n");
> +		return NULL;
> +	}
> +
> +	INIT_LIST_HEAD(&req->queue);
> +
> +	return &req->req;
> +}
> +
> +static void ast_udc_ep_free_request(struct usb_ep *_ep,
> +				    struct usb_request *_req)
> +{
> +	struct ast_udc_request *req = to_ast_req(_req);
> +
> +	kfree(req);
> +}
> +
> +static int ast_dma_descriptor_setup(struct ast_udc_ep *ep, u32 dma_buf,
> +				    u16 tx_len, struct ast_udc_request *req) {
> +	struct ast_udc_dev *udc = ep->udc;
> +	struct device *dev = &udc->pdev->dev;
> +	u32 offset, chunk;
> +	int count, last;
> +
> +	if (!ep->descs) {
> +		dev_warn(dev, "%s: Empty DMA descs list failure\n",
> +			 ep->ep.name);
> +		return -EINVAL;
> +	}
> +
> +	chunk = tx_len;
> +	offset = count = last = 0;
> +
> +	EP_DBG(ep, "req @%p, %s:%d, %s:0x%x, %s:0x%x\n", req,
> +	       "wptr", ep->descs_wptr, "dma_buf", dma_buf,
> +	       "tx_len", tx_len);
> +
> +	/* Create Descriptor Lists */
> +	while (chunk >= 0 && !last && count < AST_UDC_DESCS_COUNT) {
> +
> +		ep->descs[ep->descs_wptr].des_0 = dma_buf + offset;
> +
> +		if (chunk <= ep->chunk_max) {
> +			ep->descs[ep->descs_wptr].des_1 = chunk;
> +			last = 1;
> +		} else {
> +			ep->descs[ep->descs_wptr].des_1 = ep->chunk_max;
> +			chunk -= ep->chunk_max;
> +		}
> +
> +		EP_DBG(ep, "descs[%d]: 0x%x 0x%x, last:%d\n",
> +		       ep->descs_wptr,
> +		       ep->descs[ep->descs_wptr].des_0,
> +		       ep->descs[ep->descs_wptr].des_1,
> +		       last);
> +
> +		if (count == 0)
> +			req->saved_dma_wptr = ep->descs_wptr;
> +
> +		ep->descs_wptr++;
> +		count++;
> +
> +		if (ep->descs_wptr >= AST_UDC_DESCS_COUNT)
> +			ep->descs_wptr = 0;
> +
> +		offset = ep->chunk_max * count;
> +	}
> +
> +	return 0;
> +}
> +
> +static void ast_udc_epn_kick(struct ast_udc_ep *ep, struct
> +ast_udc_request *req) {
> +	u32 tx_len;
> +	u32 last;
> +
> +	last = req->req.length - req->req.actual;
> +	tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last;
> +
> +	EP_DBG(ep, "kick req @%p, len:%d, dir:%d\n",
> +	       req, tx_len, ep->dir_in);
> +
> +	ast_ep_write(ep, req->req.dma + req->req.actual,
> AST_UDC_EP_DMA_BUFF);
> +
> +	/* Start DMA */
> +	ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len),
> AST_UDC_EP_DMA_STS);
> +	ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len) | EP_DMA_SINGLE_KICK,
> +		     AST_UDC_EP_DMA_STS);
> +}
> +
> +static void ast_udc_epn_kick_desc(struct ast_udc_ep *ep,
> +				  struct ast_udc_request *req)
> +{
> +	u32 descs_max_size;
> +	u32 tx_len;
> +	u32 last;
> +
> +	descs_max_size = AST_EP_DMA_DESC_MAX_LEN *
> AST_UDC_DESCS_COUNT;
> +
> +	last = req->req.length - req->req.actual;
> +	tx_len = last > descs_max_size ? descs_max_size : last;
> +
> +	EP_DBG(ep, "kick req @%p, %s:%d, %s:0x%x, %s:0x%x (%d/%d),
> %s:0x%x\n",
> +	       req, "tx_len", tx_len, "dir_in", ep->dir_in,
> +	       "dma", req->req.dma + req->req.actual,
> +	       req->req.actual, req->req.length,
> +	       "descs_max_size", descs_max_size);
> +
> +	if (!ast_dma_descriptor_setup(ep, req->req.dma + req->req.actual,
> +				      tx_len, req))
> +		req->actual_dma_length += tx_len;
> +
> +	/* make sure CPU done everything before triggering DMA */
> +	mb();
> +
> +	ast_ep_write(ep, ep->descs_wptr, AST_UDC_EP_DMA_STS);
> +
> +	EP_DBG(ep, "descs_wptr:%d, dstat:0x%x, dctrl:0x%x\n",
> +	       ep->descs_wptr,
> +	       ast_ep_read(ep, AST_UDC_EP_DMA_STS),
> +	       ast_ep_read(ep, AST_UDC_EP_DMA_CTRL)); }
> +
> +static void ast_udc_ep0_queue(struct ast_udc_ep *ep,
> +			      struct ast_udc_request *req)
> +{
> +	struct ast_udc_dev *udc = ep->udc;
> +	u32 tx_len;
> +	u32 last;
> +
> +	last = req->req.length - req->req.actual;
> +	tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last;
> +
> +	ast_udc_write(udc, req->req.dma + req->req.actual,
> +		      AST_UDC_EP0_DATA_BUFF);
> +
> +	if (ep->dir_in) {
> +		/* IN requests, send data */
> +		SETUP_DBG(udc, "IN: %s:0x%x, %s:0x%x, %s:%d (%d/%d), %s:%d\n",
> +			  "buf", (u32)req->req.buf,
> +			  "dma", req->req.dma + req->req.actual,
> +			  "tx_len", tx_len,
> +			  req->req.actual, req->req.length,
> +			  "dir_in", ep->dir_in);
> +
> +		req->req.actual += tx_len;
> +		ast_udc_write(udc, EP0_TX_LEN(tx_len), AST_UDC_EP0_CTRL);
> +		ast_udc_write(udc, EP0_TX_LEN(tx_len) | EP0_TX_BUFF_RDY,
> +			      AST_UDC_EP0_CTRL);
> +
> +	} else {
> +		/* OUT requests, receive data */
> +		SETUP_DBG(udc, "OUT: %s:%x, %s:%x, %s:(%d/%d), %s:%d\n",
> +			  "buf", (u32)req->req.buf,
> +			  "dma", req->req.dma + req->req.actual,
> +			  "len", req->req.actual, req->req.length,
> +			  "dir_in", ep->dir_in);
> +
> +		if (!req->req.length) {
> +			/* 0 len request, send tx as completion */
> +			ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
> +			ep->dir_in = 0x1;
> +		} else
> +			ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL);
> +	}
> +}
> +
> +static int ast_udc_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
> +			    gfp_t gfp_flags)
> +{
> +	struct ast_udc_request *req = to_ast_req(_req);
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	struct device *dev = &udc->pdev->dev;
> +	unsigned long flags;
> +	int rc;
> +
> +	if (unlikely(!_req || !_req->complete || !_req->buf || !_ep)) {
> +		dev_warn(dev, "Invalid EP request !\n");
> +		return -EINVAL;
> +	}
> +
> +	if (ep->stopped) {
> +		dev_warn(dev, "%s is already stopped !\n", _ep->name);
> +		return -ESHUTDOWN;
> +	}
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	list_add_tail(&req->queue, &ep->queue);
> +
> +	req->req.actual = 0;
> +	req->req.status = -EINPROGRESS;
> +	req->actual_dma_length = 0;
> +
> +	rc = usb_gadget_map_request(&udc->gadget, &req->req, ep->dir_in);
> +	if (rc) {
> +		EP_DBG(ep, "Request mapping failure %d\n", rc);
> +		dev_warn(dev, "Request mapping failure %d\n", rc);
> +		goto end;
> +	}
> +
> +	EP_DBG(ep, "enqueue req @%p\n", req);
> +	EP_DBG(ep, "l=%d, dma:0x%x, zero:%d, is_in:%d\n",
> +		_req->length, _req->dma, _req->zero, ep->dir_in);
> +
> +	/* EP0 request enqueue */
> +	if (ep->ep.desc == NULL) {
> +		if ((req->req.dma % 4) != 0) {
> +			dev_warn(dev, "EP0 req dma alignment error\n");
> +			return -ESHUTDOWN;
> +		}
> +
> +		ast_udc_ep0_queue(ep, req);
> +		goto end;
> +	}
> +
> +	/* EPn request enqueue */
> +	if (list_is_singular(&ep->queue)) {
> +		if (ep->desc_mode)
> +			ast_udc_epn_kick_desc(ep, req);
> +		else
> +			ast_udc_epn_kick(ep, req);
> +	}
> +
> +end:
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return rc;
> +}
> +
> +static int ast_udc_ep_dequeue(struct usb_ep *_ep, struct usb_request
> +*_req) {
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	struct ast_udc_request *req;
> +	unsigned long flags;
> +	int rc = 0;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	/* make sure it's actually queued on this endpoint */
> +	list_for_each_entry(req, &ep->queue, queue) {
> +		if (&req->req == _req) {
> +			list_del_init(&req->queue);
> +			ast_udc_done(ep, req, -ESHUTDOWN);
> +			_req->status = -ECONNRESET;
> +			break;
> +		}
> +	}
> +
> +	/* dequeue request not found */
> +	if (&req->req != _req)
> +		rc = -EINVAL;
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return rc;
> +}
> +
> +static int ast_udc_ep_set_halt(struct usb_ep *_ep, int value) {
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	unsigned long flags;
> +	int epnum;
> +	u32 ctrl;
> +
> +	EP_DBG(ep, "val:%d\n", value);
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	epnum = usb_endpoint_num(ep->desc);
> +
> +	/* EP0 */
> +	if (epnum == 0) {
> +		ctrl = ast_udc_read(udc, AST_UDC_EP0_CTRL);
> +		if (value)
> +			ctrl |= EP0_STALL;
> +		else
> +			ctrl &= ~EP0_STALL;
> +
> +		ast_udc_write(udc, ctrl, AST_UDC_EP0_CTRL);
> +
> +	} else {
> +	/* EPn */
> +		ctrl = ast_udc_read(udc, AST_UDC_EP_CONFIG);
> +		if (value)
> +			ctrl |= EP_SET_EP_STALL;
> +		else
> +			ctrl &= ~EP_SET_EP_STALL;
> +
> +		ast_ep_write(ep, ctrl, AST_UDC_EP_CONFIG);
> +
> +		/* only epn is stopped and waits for clear */
> +		ep->stopped = value ? 1 : 0;
> +	}
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static const struct usb_ep_ops ast_udc_ep_ops = {
> +	.enable		= ast_udc_ep_enable,
> +	.disable	= ast_udc_ep_disable,
> +	.alloc_request	= ast_udc_ep_alloc_request,
> +	.free_request	= ast_udc_ep_free_request,
> +	.queue		= ast_udc_ep_queue,
> +	.dequeue	= ast_udc_ep_dequeue,
> +	.set_halt	= ast_udc_ep_set_halt,
> +	/* there's only imprecise fifo status reporting */ };
> +
> +static void ast_udc_ep0_rx(struct ast_udc_dev *udc) {
> +	ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
> +	ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL); }
> +
> +static void ast_udc_ep0_tx(struct ast_udc_dev *udc) {
> +	ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
> +	ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); }
> +
> +static void ast_udc_ep0_out(struct ast_udc_dev *udc) {
> +	struct device *dev = &udc->pdev->dev;
> +	struct ast_udc_ep *ep = &udc->ep[0];
> +	struct ast_udc_request *req;
> +	u16 rx_len;
> +
> +	if (list_empty(&ep->queue))
> +		return;
> +
> +	req = list_entry(ep->queue.next, struct ast_udc_request, queue);
> +
> +	rx_len = EP0_GET_RX_LEN(ast_udc_read(udc, AST_UDC_EP0_CTRL));
> +	req->req.actual += rx_len;
> +
> +	SETUP_DBG(udc, "req %p (%d/%d)\n", req,
> +		  req->req.actual, req->req.length);
> +
> +	if ((rx_len < ep->ep.maxpacket) ||
> +	    (req->req.actual == req->req.length)) {
> +		ast_udc_ep0_tx(udc);
> +		if (!ep->dir_in)
> +			ast_udc_done(ep, req, 0);
> +
> +	} else {
> +		if (rx_len > req->req.length) {
> +			// Issue Fix
> +			dev_warn(dev, "Something wrong (%d/%d)\n",
> +				 req->req.actual, req->req.length);
> +			ast_udc_ep0_tx(udc);
> +			ast_udc_done(ep, req, 0);
> +			return;
> +		}
> +
> +		ep->dir_in = 0;
> +
> +		/* More works */
> +		ast_udc_ep0_queue(ep, req);
> +	}
> +}
> +
> +static void ast_udc_ep0_in(struct ast_udc_dev *udc) {
> +	struct ast_udc_ep *ep = &udc->ep[0];
> +	struct ast_udc_request *req;
> +
> +	if (list_empty(&ep->queue)) {
> +		if (udc->is_control_tx) {
> +			ast_udc_ep0_rx(udc);
> +			udc->is_control_tx = 0;
> +		}
> +
> +		return;
> +	}
> +
> +	req = list_entry(ep->queue.next, struct ast_udc_request, queue);
> +
> +	SETUP_DBG(udc, "req %p (%d/%d)\n", req,
> +		  req->req.actual, req->req.length);
> +
> +	if (req->req.length == req->req.actual) {
> +		if (req->req.length)
> +			ast_udc_ep0_rx(udc);
> +
> +		if (ep->dir_in)
> +			ast_udc_done(ep, req, 0);
> +
> +	} else {
> +		/* More works */
> +		ast_udc_ep0_queue(ep, req);
> +	}
> +}
> +
> +static void ast_udc_epn_handle(struct ast_udc_dev *udc, u16 ep_num) {
> +	struct ast_udc_ep *ep = &udc->ep[ep_num];
> +	struct ast_udc_request *req;
> +	u16 len = 0;
> +
> +	if (list_empty(&ep->queue))
> +		return;
> +
> +	req = list_first_entry(&ep->queue, struct ast_udc_request, queue);
> +
> +	len = EP_DMA_GET_TX_SIZE(ast_ep_read(ep, AST_UDC_EP_DMA_STS));
> +	req->req.actual += len;
> +
> +	EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req,
> +		req->req.actual, req->req.length, "len", len);
> +
> +	/* Done this request */
> +	if (req->req.length == req->req.actual) {
> +		ast_udc_done(ep, req, 0);
> +		req = list_first_entry_or_null(&ep->queue,
> +					       struct ast_udc_request,
> +					       queue);
> +
> +	} else {
> +		/* Check for short packet */
> +		if (len < ep->ep.maxpacket) {
> +			ast_udc_done(ep, req, 0);
> +			req = list_first_entry_or_null(&ep->queue,
> +						       struct ast_udc_request,
> +						       queue);
> +		}
> +	}
> +
> +	/* More requests */
> +	if (req)
> +		ast_udc_epn_kick(ep, req);
> +}
> +
> +static void ast_udc_epn_handle_desc(struct ast_udc_dev *udc, u16
> +ep_num) {
> +	struct ast_udc_ep *ep = &udc->ep[ep_num];
> +	struct device *dev = &udc->pdev->dev;
> +	struct ast_udc_request *req;
> +	u32 proc_sts, wr_ptr, rd_ptr;
> +	u32 len_in_desc, ctrl;
> +	u16 total_len = 0;
> +	int i;
> +
> +	if (list_empty(&ep->queue)) {
> +		dev_warn(dev, "%s reqest queue empty !\n", ep->ep.name);
> +		return;
> +	}
> +
> +	req = list_first_entry(&ep->queue, struct ast_udc_request, queue);
> +
> +	ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_CTRL);
> +	proc_sts = EP_DMA_CTRL_GET_PROC_STS(ctrl);
> +
> +	/* Check processing status is idle */
> +	if (proc_sts != EP_DMA_CTRL_STS_RX_IDLE &&
> +	    proc_sts != EP_DMA_CTRL_STS_TX_IDLE) {
> +		dev_warn(dev, "EP DMA CTRL: 0x%x, PS:0x%x\n",
> +			 ast_ep_read(ep, AST_UDC_EP_DMA_CTRL),
> +			 proc_sts);
> +		return;
> +	}
> +
> +	ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_STS);
> +	rd_ptr = EP_DMA_GET_RPTR(ctrl);
> +	wr_ptr = EP_DMA_GET_WPTR(ctrl);
> +
> +	if (rd_ptr != wr_ptr) {
> +		dev_warn(dev, "desc list is not empty ! %s:%d, %s:%d\n",
> +		"rptr", rd_ptr, "wptr", wr_ptr);
> +		return;
> +	}
> +
> +	EP_DBG(ep, "rd_ptr:%d, wr_ptr:%d\n", rd_ptr, wr_ptr);
> +	i = req->saved_dma_wptr;
> +
> +	do {
> +		len_in_desc = EP_DESC1_IN_LEN(ep->descs[i].des_1);
> +		EP_DBG(ep, "desc[%d] len: %d\n", i, len_in_desc);
> +		total_len += len_in_desc;
> +		i++;
> +		if (i >= AST_UDC_DESCS_COUNT)
> +			i = 0;
> +
> +	} while (i != wr_ptr);
> +
> +	req->req.actual += total_len;
> +
> +	EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req,
> +		req->req.actual, req->req.length, "len", total_len);
> +
> +	/* Done this request */
> +	if (req->req.length == req->req.actual) {
> +		ast_udc_done(ep, req, 0);
> +		req = list_first_entry_or_null(&ep->queue,
> +					       struct ast_udc_request,
> +					       queue);
> +
> +	} else {
> +		/* Check for short packet */
> +		if (total_len < ep->ep.maxpacket) {
> +			ast_udc_done(ep, req, 0);
> +			req = list_first_entry_or_null(&ep->queue,
> +						       struct ast_udc_request,
> +						       queue);
> +		}
> +	}
> +
> +	/* More requests & dma descs not setup yet */
> +	if (req && (req->actual_dma_length == req->req.actual)) {
> +		EP_DBG(ep, "More requests\n");
> +		ast_udc_epn_kick_desc(ep, req);
> +	}
> +}
> +
> +static void ast_udc_ep0_data_tx(struct ast_udc_dev *udc, u8 *tx_data,
> +u32 len) {
> +	if (len) {
> +		memcpy(udc->ep0_buf, tx_data, len);
> +
> +		ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
> +		ast_udc_write(udc, EP0_TX_LEN(len), AST_UDC_EP0_CTRL);
> +		ast_udc_write(udc, EP0_TX_LEN(len) | EP0_TX_BUFF_RDY,
> +			      AST_UDC_EP0_CTRL);
> +		udc->is_control_tx = 1;
> +
> +	} else
> +		ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); }
> +
> +static void ast_udc_getstatus(struct ast_udc_dev *udc) {
> +	struct usb_ctrlrequest crq;
> +	struct ast_udc_ep *ep;
> +	u16 status = 0;
> +	u16 epnum = 0;
> +
> +	memcpy_fromio(&crq, udc->creq, sizeof(crq));
> +
> +	switch (crq.bRequestType & USB_RECIP_MASK) {
> +	case USB_RECIP_DEVICE:
> +		/* Get device status */
> +		status = 1 << USB_DEVICE_SELF_POWERED;
> +		break;
> +	case USB_RECIP_INTERFACE:
> +		break;
> +	case USB_RECIP_ENDPOINT:
> +		epnum = crq.wIndex & USB_ENDPOINT_NUMBER_MASK;
> +		status = udc->ep[epnum].stopped;
> +		break;
> +	default:
> +		goto stall;
> +	}
> +
> +	ep = &udc->ep[epnum];
> +	EP_DBG(ep, "status: 0x%x\n", status);
> +	ast_udc_ep0_data_tx(udc, (u8 *)&status, sizeof(status));
> +
> +	return;
> +
> +stall:
> +	EP_DBG(ep, "Can't respond request\n");
> +	ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL,
> +		      AST_UDC_EP0_CTRL);
> +}
> +
> +static void ast_udc_ep0_handle_setup(struct ast_udc_dev *udc) {
> +	struct ast_udc_ep *ep = &udc->ep[0];
> +	struct ast_udc_request *req;
> +	struct usb_ctrlrequest crq;
> +	int req_num = 0;
> +	int rc = 0;
> +	u32 reg;
> +
> +	memcpy_fromio(&crq, udc->creq, sizeof(crq));
> +
> +	SETUP_DBG(udc, "SETEUP packet: %02x/%02x/%04x/%04x/%04x\n",
> +		  crq.bRequestType, crq.bRequest, le16_to_cpu(crq.wValue),
> +		  le16_to_cpu(crq.wIndex), le16_to_cpu(crq.wLength));
> +
> +	/*
> +	 * Cleanup ep0 request(s) in queue because
> +	 * there is a new control setup comes.
> +	 */
> +	list_for_each_entry(req, &udc->ep[0].queue, queue) {
> +		req_num++;
> +		EP_DBG(ep, "there is req %p in ep0 queue !\n", req);
> +	}
> +
> +	if (req_num)
> +		ast_udc_nuke(&udc->ep[0], -ETIMEDOUT);
> +
> +	udc->ep[0].dir_in = crq.bRequestType & USB_DIR_IN;
> +
> +	if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
> +		switch (crq.bRequest) {
> +		case USB_REQ_SET_ADDRESS:
> +			if (ast_udc_read(udc, AST_UDC_STS) & UDC_STS_HIGHSPEED)
> +				udc->gadget.speed = USB_SPEED_HIGH;
> +			else
> +				udc->gadget.speed = USB_SPEED_FULL;
> +
> +			SETUP_DBG(udc, "set addr: 0x%x\n", crq.wValue);
> +			reg = ast_udc_read(udc, AST_UDC_CONFIG);
> +			reg &= ~UDC_CFG_ADDR_MASK;
> +			reg |= UDC_CFG_SET_ADDR(crq.wValue);
> +			ast_udc_write(udc, reg, AST_UDC_CONFIG);
> +			goto req_complete;
> +
> +		case USB_REQ_CLEAR_FEATURE:
> +			SETUP_DBG(udc, "ep0: CLEAR FEATURE\n");
> +			goto req_driver;
> +
> +		case USB_REQ_SET_FEATURE:
> +			SETUP_DBG(udc, "ep0: SET FEATURE\n");
> +			goto req_driver;
> +
> +		case USB_REQ_GET_STATUS:
> +			ast_udc_getstatus(udc);
> +			return;
> +
> +		default:
> +			goto req_driver;
> +		}
> +
> +	}
> +
> +req_driver:
> +	if (udc->driver) {
> +		SETUP_DBG(udc, "Forwarding %s to gadget...\n",
> +			  udc->gadget.name);
> +
> +		spin_unlock(&udc->lock);
> +		rc = udc->driver->setup(&udc->gadget, &crq);
> +		spin_lock(&udc->lock);
> +
> +	} else {
> +		SETUP_DBG(udc, "No gadget for request !\n");
> +	}
> +
> +	if (rc >= 0)
> +		return;
> +
> +	/* Stall if gadget failed */
> +	SETUP_DBG(udc, "Stalling, rc:0x%x\n", rc);
> +	ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL,
> +		      AST_UDC_EP0_CTRL);
> +	return;
> +
> +req_complete:
> +	SETUP_DBG(udc, "ep0: Sending IN status without data\n");
> +	ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); }
> +
> +static irqreturn_t ast_udc_isr(int irq, void *data) {
> +	struct ast_udc_dev *udc = (struct ast_udc_dev *)data;
> +	struct ast_udc_ep *ep;
> +	u32 isr, ep_isr;
> +	int i;
> +
> +	spin_lock(&udc->lock);
> +
> +	isr = ast_udc_read(udc, AST_UDC_ISR);
> +	if (!isr)
> +		goto done;
> +
> +	/* Ack interrupts */
> +	ast_udc_write(udc, isr, AST_UDC_ISR);
> +
> +	if (isr & UDC_IRQ_BUS_RESET) {
> +		ISR_DBG(udc, "UDC_IRQ_BUS_RESET\n");
> +		udc->gadget.speed = USB_SPEED_UNKNOWN;
> +
> +		ep = &udc->ep[1];
> +		EP_DBG(ep, "dctrl:0x%x\n",
> +		       ast_ep_read(ep, AST_UDC_EP_DMA_CTRL));
> +
> +		if (udc->driver && udc->driver->reset) {
> +			spin_unlock(&udc->lock);
> +			udc->driver->reset(&udc->gadget);
> +			spin_lock(&udc->lock);
> +		}
> +	}
> +
> +	if (isr & UDC_IRQ_BUS_SUSPEND) {
> +		ISR_DBG(udc, "UDC_IRQ_BUS_SUSPEND\n");
> +		udc->suspended_from = udc->gadget.state;
> +		usb_gadget_set_state(&udc->gadget, USB_STATE_SUSPENDED);
> +
> +		if (udc->driver && udc->driver->suspend) {
> +			spin_unlock(&udc->lock);
> +			udc->driver->suspend(&udc->gadget);
> +			spin_lock(&udc->lock);
> +		}
> +	}
> +
> +	if (isr & UDC_IRQ_BUS_RESUME) {
> +		ISR_DBG(udc, "UDC_IRQ_BUS_RESUME\n");
> +		usb_gadget_set_state(&udc->gadget, udc->suspended_from);
> +
> +		if (udc->driver && udc->driver->resume) {
> +			spin_unlock(&udc->lock);
> +			udc->driver->resume(&udc->gadget);
> +			spin_lock(&udc->lock);
> +		}
> +	}
> +
> +	if (isr & UDC_IRQ_EP0_IN_ACK_STALL) {
> +		ISR_DBG(udc, "UDC_IRQ_EP0_IN_ACK_STALL\n");
> +		ast_udc_ep0_in(udc);
> +	}
> +
> +	if (isr & UDC_IRQ_EP0_OUT_ACK_STALL) {
> +		ISR_DBG(udc, "UDC_IRQ_EP0_OUT_ACK_STALL\n");
> +		ast_udc_ep0_out(udc);
> +	}
> +
> +	if (isr & UDC_IRQ_EP0_SETUP) {
> +		ISR_DBG(udc, "UDC_IRQ_EP0_SETUP\n");
> +		ast_udc_ep0_handle_setup(udc);
> +	}
> +
> +	if (isr & UDC_IRQ_EP_POOL_ACK_STALL) {
> +		ISR_DBG(udc, "UDC_IRQ_EP_POOL_ACK_STALL\n");
> +		ep_isr = ast_udc_read(udc, AST_UDC_EP_ACK_ISR);
> +
> +		/* Ack EP interrupts */
> +		ast_udc_write(udc, ep_isr, AST_UDC_EP_ACK_ISR);
> +
> +		/* Handle each EP */
> +		for (i = 0; i < AST_UDC_NUM_ENDPOINTS - 1; i++) {
> +			if (ep_isr & (0x1 << i)) {
> +				ep = &udc->ep[i + 1];
> +				if (ep->desc_mode)
> +					ast_udc_epn_handle_desc(udc, i + 1);
> +				else
> +					ast_udc_epn_handle(udc, i + 1);
> +			}
> +		}
> +	}
> +
> +done:
> +	spin_unlock(&udc->lock);
> +	return IRQ_HANDLED;
> +}
> +
> +static int ast_udc_gadget_getframe(struct usb_gadget *gadget) {
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +
> +	return (ast_udc_read(udc, AST_UDC_STS) >> 16) & 0x7ff; }
> +
> +static void ast_udc_wake_work(struct work_struct *work) {
> +	struct ast_udc_dev *udc = container_of(work, struct ast_udc_dev,
> +					       wake_work);
> +	unsigned long flags;
> +	u32 ctrl;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	UDC_DBG(udc, "Wakeup Host !\n");
> +	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL);
> +	ast_udc_write(udc, ctrl | USB_REMOTE_WAKEUP_EN,
> AST_UDC_FUNC_CTRL);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags); }
> +
> +static void ast_udc_wakeup_all(struct ast_udc_dev *udc) {
> +	/*
> +	 * A device is trying to wake the world, because this
> +	 * can recurse into the device, we break the call chain
> +	 * using a work queue
> +	 */
> +	schedule_work(&udc->wake_work);
> +}
> +
> +static int ast_udc_wakeup(struct usb_gadget *gadget) {
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +	unsigned long flags;
> +	int rc = 0;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	if (!udc->wakeup_en) {
> +		UDC_DBG(udc, "Remote Wakeup is disabled\n");
> +		rc = -EINVAL;
> +		goto err;
> +	}
> +
> +	UDC_DBG(udc, "Device initiated wakeup\n");
> +	ast_udc_wakeup_all(udc);
> +
> +err:
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +	return rc;
> +}
> +
> +/*
> + * Activate/Deactivate link with host
> + */
> +static int ast_udc_pullup(struct usb_gadget *gadget, int is_on) {
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +	unsigned long flags;
> +	u32 ctrl;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	UDC_DBG(udc, "is_on: %d\n", is_on);
> +	if (is_on)
> +		ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) |
> USB_UPSTREAM_EN;
> +	else
> +		ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) &
> ~USB_UPSTREAM_EN;
> +
> +	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int ast_udc_start(struct usb_gadget *gadget,
> +			 struct usb_gadget_driver *driver)
> +{
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +	struct ast_udc_ep *ep;
> +	unsigned long flags;
> +	int i;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	UDC_DBG(udc, "\n");
> +	udc->driver = driver;
> +	udc->gadget.dev.of_node = udc->pdev->dev.of_node;
> +
> +	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
> +		ep = &udc->ep[i];
> +		ep->stopped = 0;
> +	}
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int ast_udc_stop(struct usb_gadget *gadget) {
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +	unsigned long flags;
> +	u32 ctrl;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	UDC_DBG(udc, "\n");
> +	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
> +	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +
> +	udc->gadget.speed = USB_SPEED_UNKNOWN;
> +	udc->driver = NULL;
> +
> +	ast_udc_stop_activity(udc);
> +	usb_gadget_set_state(&udc->gadget, USB_STATE_NOTATTACHED);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static const struct usb_gadget_ops ast_udc_ops = {
> +	.get_frame		= ast_udc_gadget_getframe,
> +	.wakeup			= ast_udc_wakeup,
> +	.pullup			= ast_udc_pullup,
> +	.udc_start		= ast_udc_start,
> +	.udc_stop		= ast_udc_stop,
> +};
> +
> +/*
> + * Support 1 Control Endpoint.
> + * Support multiple programmable endpoints that can be configured to
> + * Bulk IN/OUT, Interrupt IN/OUT, and Isochronous IN/OUT type endpoint.
> + */
> +static void ast_udc_init_ep(struct ast_udc_dev *udc) {
> +	struct ast_udc_ep *ep;
> +	int i;
> +
> +	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
> +		ep = &udc->ep[i];
> +		ep->ep.name = ast_ep_name[i];
> +		if (i == 0) {
> +			ep->ep.caps.type_control = true;
> +		} else {
> +			ep->ep.caps.type_iso = true;
> +			ep->ep.caps.type_bulk = true;
> +			ep->ep.caps.type_int = true;
> +		}
> +		ep->ep.caps.dir_in = true;
> +		ep->ep.caps.dir_out = true;
> +
> +		ep->ep.ops = &ast_udc_ep_ops;
> +		ep->udc = udc;
> +
> +		INIT_LIST_HEAD(&ep->queue);
> +
> +		if (i == 0) {
> +			usb_ep_set_maxpacket_limit(&ep->ep,
> +						   AST_UDC_EP0_MAX_PACKET);
> +			continue;
> +		}
> +
> +		ep->ep_reg = udc->reg + AST_UDC_EP_BASE +
> +				(AST_UDC_EP_OFFSET * (i - 1));
> +
> +		ep->epn_buf = udc->ep0_buf + (i * AST_UDC_EP_DMA_SIZE);
> +		ep->epn_buf_dma = udc->ep0_buf_dma + (i *
> AST_UDC_EP_DMA_SIZE);
> +		usb_ep_set_maxpacket_limit(&ep->ep,
> AST_UDC_EPn_MAX_PACKET);
> +
> +		ep->descs = ep->epn_buf + AST_UDC_EPn_MAX_PACKET;
> +		ep->descs_dma = ep->epn_buf_dma + AST_UDC_EPn_MAX_PACKET;
> +		ep->descs_wptr = 0;
> +
> +		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
> +	}
> +}
> +
> +static void ast_udc_init_dev(struct ast_udc_dev *udc) {
> +	INIT_WORK(&udc->wake_work, ast_udc_wake_work); }
> +
> +static void ast_udc_init_hw(struct ast_udc_dev *udc) {
> +	u32 ctrl;
> +
> +	/* Enable PHY */
> +	ctrl = USB_PHY_CLK_EN | USB_PHY_RESET_DIS;
> +	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +
> +	udelay(1);
> +	ast_udc_write(udc, 0, AST_UDC_DEV_RESET);
> +
> +	/* Set descriptor ring size */
> +	if (AST_UDC_DESCS_COUNT == 256) {
> +		ctrl |= USB_EP_LONG_DESC;
> +		ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +	}
> +
> +	/* Mask & ack all interrupts before installing the handler */
> +	ast_udc_write(udc, 0, AST_UDC_IER);
> +	ast_udc_write(udc, UDC_IRQ_ACK_ALL, AST_UDC_ISR);
> +
> +	/* Enable some interrupts */
> +	ctrl = UDC_IRQ_EP_POOL_ACK_STALL | UDC_IRQ_BUS_RESUME |
> +	       UDC_IRQ_BUS_SUSPEND | UDC_IRQ_BUS_RESET |
> +	       UDC_IRQ_EP0_IN_ACK_STALL | UDC_IRQ_EP0_OUT_ACK_STALL
> |
> +	       UDC_IRQ_EP0_SETUP;
> +	ast_udc_write(udc, ctrl, AST_UDC_IER);
> +
> +	/* Cleanup and enable ep ACK interrupts */
> +	ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_IER);
> +	ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_ISR);
> +
> +	ast_udc_write(udc, 0, AST_UDC_EP0_CTRL); }
> +
> +static int ast_udc_remove(struct platform_device *pdev) {
> +	struct ast_udc_dev *udc = platform_get_drvdata(pdev);
> +	unsigned long flags;
> +	u32 ctrl;
> +
> +	usb_del_gadget_udc(&udc->gadget);
> +	if (udc->driver)
> +		return -EBUSY;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	/* Disable upstream port connection */
> +	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
> +	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +
> +	clk_disable_unprepare(udc->clk);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	if (udc->ep0_buf)
> +		dma_free_coherent(&pdev->dev,
> +				  AST_UDC_EP_DMA_SIZE * AST_UDC_NUM_ENDPOINTS,
> +				  udc->ep0_buf,
> +				  udc->ep0_buf_dma);
> +
> +	udc->ep0_buf = NULL;
> +
> +	return 0;
> +}
> +
> +static int ast_udc_probe(struct platform_device *pdev) {
> +	enum usb_device_speed max_speed;
> +	struct device *dev = &pdev->dev;
> +	struct ast_udc_dev *udc;
> +	struct resource *res;
> +	int rc;
> +
> +	udc = devm_kzalloc(&pdev->dev, sizeof(struct ast_udc_dev),
> GFP_KERNEL);
> +	if (!udc)
> +		return -ENOMEM;
> +
> +	udc->gadget.dev.parent = dev;
> +	udc->pdev = pdev;
> +	spin_lock_init(&udc->lock);
> +
> +	udc->gadget.ops = &ast_udc_ops;
> +	udc->gadget.ep0 = &udc->ep[0].ep;
> +	udc->gadget.name = "aspeed-udc";
> +	udc->gadget.dev.init_name = "gadget";
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	udc->reg = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(udc->reg)) {
> +		dev_err(&pdev->dev, "Failed to map resources\n");
> +		return PTR_ERR(udc->reg);
> +	}
> +
> +	platform_set_drvdata(pdev, udc);
> +
> +	udc->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(udc->clk)) {
> +		rc = PTR_ERR(udc->clk);
> +		goto err;
> +	}
> +	rc = clk_prepare_enable(udc->clk);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Failed to enable clock (0x%x)\n", rc);
> +		goto err;
> +	}
> +
> +	/* Check if we need to limit the HW to USB1 */
> +	max_speed = usb_get_maximum_speed(&pdev->dev);
> +	if (max_speed != USB_SPEED_UNKNOWN && max_speed <
> USB_SPEED_HIGH)
> +		udc->force_usb1 = true;
> +
> +	/*
> +	 * Allocate DMA buffers for all EPs in one chunk
> +	 */
> +	udc->ep0_buf = dma_alloc_coherent(&pdev->dev,
> +					  AST_UDC_EP_DMA_SIZE *
> +					  AST_UDC_NUM_ENDPOINTS,
> +					  &udc->ep0_buf_dma, GFP_KERNEL);
> +
> +	udc->gadget.speed = USB_SPEED_UNKNOWN;
> +	udc->gadget.max_speed = USB_SPEED_HIGH;
> +	udc->creq = udc->reg + AST_UDC_SETUP0;
> +
> +	/*
> +	 * Support single stage mode or 32/256 stages descriptor mode.
> +	 * Set default as Descriptor Mode.
> +	 */
> +	udc->desc_mode = AST_UDC_DESC_MODE;
> +
> +	dev_info(&pdev->dev, "DMA %s\n", udc->desc_mode ?
> +		 "descriptor mode" : "single mode");
> +
> +	INIT_LIST_HEAD(&udc->gadget.ep_list);
> +	INIT_LIST_HEAD(&udc->gadget.ep0->ep_list);
> +
> +	/* Initialized udc ep */
> +	ast_udc_init_ep(udc);
> +
> +	/* Initialized udc device */
> +	ast_udc_init_dev(udc);
> +
> +	/* Initialized udc hardware */
> +	ast_udc_init_hw(udc);
> +
> +	/* Find interrupt and install handler */
> +	udc->irq = platform_get_irq(pdev, 0);
> +	if (udc->irq < 0) {
> +		dev_err(&pdev->dev, "Failed to get interrupt\n");
> +		rc = udc->irq;
> +		goto err;
> +	}
> +
> +	rc = devm_request_irq(&pdev->dev, udc->irq, ast_udc_isr, 0,
> +			      KBUILD_MODNAME, udc);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Failed to request interrupt\n");
> +		goto err;
> +	}
> +
> +	rc = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Failed to add gadget udc\n");
> +		goto err;
> +	}
> +
> +	dev_info(&pdev->dev, "Initialized udc in USB%s mode\n",
> +		 udc->force_usb1 ? "1" : "2");
> +
> +	return 0;
> +
> +err:
> +	dev_err(&pdev->dev, "Failed to udc probe, rc:0x%x\n", rc);
> +	ast_udc_remove(pdev);
> +
> +	return rc;
> +}
> +
> +static const struct of_device_id ast_udc_of_dt_ids[] = {
> +	{ .compatible = "aspeed,ast2600-udc", },
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(of, ast_udc_of_dt_ids);
> +
> +static struct platform_driver ast_udc_driver = {
> +	.probe			= ast_udc_probe,
> +	.remove			= ast_udc_remove,
> +	.driver			= {
> +		.name			= KBUILD_MODNAME,
> +		.of_match_table		= ast_udc_of_dt_ids,
> +	},
> +};
> +
> +module_platform_driver(ast_udc_driver);
> +
> +MODULE_DESCRIPTION("ASPEED UDC driver"); MODULE_AUTHOR("Neal Liu
> +<neal_liu@aspeedtech.com>"); MODULE_LICENSE("GPL");
> --
> 2.25.1
Greg Kroah-Hartman May 30, 2022, 6:24 a.m. UTC | #2
On Mon, May 30, 2022 at 01:27:16AM +0000, Neal Liu wrote:
> Gentle ping on this path, thanks.

Please never top-post.

Also, it is the middle of the merge window and we can not do anything
with new submissions.  Please wait until next week at the earliest
before we can even start to look at stuff like this.

What is the rush?

thanks,

greg k-h
Neal Liu May 30, 2022, 6:30 a.m. UTC | #3
> On Mon, May 30, 2022 at 01:27:16AM +0000, Neal Liu wrote:
> > Gentle ping on this path, thanks.
> 
> Please never top-post.
> 
> Also, it is the middle of the merge window and we can not do anything with
> new submissions.  Please wait until next week at the earliest before we can
> even start to look at stuff like this.
> 
> What is the rush?
> 
> thanks,
> 
> greg k-h

No rush, just kindly reminder. Thanks for the notice.
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index e8c52d0192a6..784d8d8e7b22 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3109,6 +3109,13 @@  S:	Maintained
 F:	Documentation/devicetree/bindings/media/aspeed-video.txt
 F:	drivers/media/platform/aspeed/
 
+ASPEED USB UDC DRIVER
+M:	Neal Liu <neal_liu@aspeedtech.com>
+L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/usb/aspeed,udc.yaml
+F:	drivers/usb/gadget/udc/aspeed_udc.c
+
 ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
 M:	Corentin Chary <corentin.chary@gmail.com>
 L:	acpi4asus-user@lists.sourceforge.net
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 69394dc1cdfb..03535f33511b 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -463,6 +463,19 @@  config USB_TEGRA_XUDC
 	 dynamically linked module called "tegra_xudc" and force all
 	 gadget drivers to also be dynamically linked.
 
+config USB_ASPEED_UDC
+	tristate "Aspeed UDC driver support"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	depends on USB_LIBCOMPOSITE
+	help
+	  Enables Aspeed USB2.0 Device Controller driver for AST260x
+	  family SoCs. The controller supports 1 control endpoint and
+	  4 programmable endpoints.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "aspeed_udc" and force all
+	  gadget drivers to also be dynamically linked.
+
 source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
 
 #
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index a21f2224e7eb..12f9e4c9eb0c 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -40,5 +40,6 @@  obj-$(CONFIG_USB_GR_UDC)	+= gr_udc.o
 obj-$(CONFIG_USB_GADGET_XILINX)	+= udc-xilinx.o
 obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o
 obj-$(CONFIG_USB_ASPEED_VHUB)	+= aspeed-vhub/
+obj-$(CONFIG_USB_ASPEED_UDC)	+= aspeed_udc.o
 obj-$(CONFIG_USB_BDC_UDC)	+= bdc/
 obj-$(CONFIG_USB_MAX3420_UDC)	+= max3420_udc.o
diff --git a/drivers/usb/gadget/udc/aspeed_udc.c b/drivers/usb/gadget/udc/aspeed_udc.c
new file mode 100644
index 000000000000..1fc15228ff15
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed_udc.c
@@ -0,0 +1,1596 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Aspeed Technology Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/prefetch.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/slab.h>
+
+#define AST_UDC_NUM_ENDPOINTS		(1 + 4)
+#define AST_UDC_EP0_MAX_PACKET		64	/* EP0's max packet size */
+#define AST_UDC_EPn_MAX_PACKET		1024	/* Generic EPs max packet size */
+#define AST_UDC_DESCS_COUNT		256	/* Use 256 stages descriptor mode (32/256) */
+#define AST_UDC_DESC_MODE		1	/* Single/Multiple Stage(s) Descriptor Mode */
+
+#define AST_UDC_EP_DMA_SIZE		(AST_UDC_EPn_MAX_PACKET + 8 * AST_UDC_DESCS_COUNT)
+
+/*****************************
+ *                           *
+ * UDC register definitions  *
+ *                           *
+ *****************************/
+
+#define AST_UDC_FUNC_CTRL		0x00	/* Root Function Control & Status Register */
+#define AST_UDC_CONFIG			0x04	/* Root Configuration Setting Register */
+#define AST_UDC_IER			0x08	/* Interrupt Control Register */
+#define AST_UDC_ISR			0x0C	/* Interrupt Status Register */
+#define AST_UDC_EP_ACK_IER		0x10	/* Programmable ep Pool ACK Interrupt Enable Reg */
+#define AST_UDC_EP_NAK_IER		0x14	/* Programmable ep Pool NAK Interrupt Enable Reg */
+#define AST_UDC_EP_ACK_ISR		0x18	/* Programmable ep Pool ACK Interrupt Status Reg */
+#define AST_UDC_EP_NAK_ISR		0x1C	/* Programmable ep Pool NAK Interrupt Status Reg */
+#define AST_UDC_DEV_RESET		0x20	/* Device Controller Soft Reset Enable Register */
+#define AST_UDC_STS			0x24	/* USB Status Register */
+#define AST_VHUB_EP_DATA		0x28	/* Programmable ep Pool Data Toggle Value Set */
+#define AST_VHUB_ISO_TX_FAIL		0x2C	/* Isochronous Transaction Fail Accumulator */
+#define AST_UDC_EP0_CTRL		0x30	/* Endpoint 0 Control/Status Register */
+#define AST_UDC_EP0_DATA_BUFF		0x34	/* Base Address of ep0 IN/OUT Data Buffer Reg */
+#define AST_UDC_SETUP0			0x80    /* Root Device Setup Data Buffer0 */
+#define AST_UDC_SETUP1			0x84    /* Root Device Setup Data Buffer1 */
+
+
+/* Main control reg */
+#define USB_PHY_CLK_EN			BIT(31)
+#define USB_FIFO_DYN_PWRD_EN		BIT(19)
+#define USB_EP_LONG_DESC		BIT(18)
+#define USB_BIST_TEST_PASS		BIT(13)
+#define USB_BIST_TURN_ON		BIT(12)
+#define USB_PHY_RESET_DIS		BIT(11)
+#define USB_TEST_MODE(x)		((x) << 8)
+#define USB_FORCE_TIMER_HS		BIT(7)
+#define USB_FORCE_HS			BIT(6)
+#define USB_REMOTE_WAKEUP_12MS		BIT(5)
+#define USB_REMOTE_WAKEUP_EN		BIT(4)
+#define USB_AUTO_REMOTE_WAKEUP_EN	BIT(3)
+#define USB_STOP_CLK_IN_SUPEND		BIT(2)
+#define USB_UPSTREAM_FS			BIT(1)
+#define USB_UPSTREAM_EN			BIT(0)
+
+/* Main config reg */
+#define UDC_CFG_SET_ADDR(x)		((x) & 0x3f)
+#define UDC_CFG_ADDR_MASK		(0x3f)
+
+/* Interrupt ctrl & status reg */
+#define UDC_IRQ_EP_POOL_NAK		BIT(17)
+#define UDC_IRQ_EP_POOL_ACK_STALL	BIT(16)
+#define UDC_IRQ_BUS_RESUME		BIT(8)
+#define UDC_IRQ_BUS_SUSPEND		BIT(7)
+#define UDC_IRQ_BUS_RESET		BIT(6)
+#define UDC_IRQ_EP0_IN_DATA_NAK		BIT(4)
+#define UDC_IRQ_EP0_IN_ACK_STALL	BIT(3)
+#define UDC_IRQ_EP0_OUT_NAK		BIT(2)
+#define UDC_IRQ_EP0_OUT_ACK_STALL	BIT(1)
+#define UDC_IRQ_EP0_SETUP		BIT(0)
+#define UDC_IRQ_ACK_ALL			(0x1ff)
+
+/* EP isr reg */
+#define USB_EP3_ISR			BIT(3)
+#define USB_EP2_ISR			BIT(2)
+#define USB_EP1_ISR			BIT(1)
+#define USB_EP0_ISR			BIT(0)
+#define UDC_IRQ_EP_ACK_ALL		(0xf)
+
+/*Soft reset reg */
+#define ROOT_UDC_SOFT_RESET		BIT(0)
+
+/* USB status reg */
+#define UDC_STS_HIGHSPEED		BIT(27)
+
+/* Programmable EP data toggle */
+#define EP_TOGGLE_SET_EPNUM(x)		((x) & 0x3)
+
+/* EP0 ctrl reg */
+#define EP0_GET_RX_LEN(x)		((x >> 16) & 0x7f)
+#define EP0_TX_LEN(x)			((x & 0x7f) << 8)
+#define EP0_RX_BUFF_RDY			BIT(2)
+#define EP0_TX_BUFF_RDY			BIT(1)
+#define EP0_STALL			BIT(0)
+
+/*************************************
+ *                                   *
+ * per-endpoint register definitions *
+ *                                   *
+ *************************************/
+
+#define AST_UDC_EP_CONFIG		0x00	/* Endpoint Configuration Register */
+#define AST_UDC_EP_DMA_CTRL		0x04	/* DMA Descriptor List Control/Status Register */
+#define AST_UDC_EP_DMA_BUFF		0x08	/* DMA Descriptor/Buffer Base Address */
+#define AST_UDC_EP_DMA_STS		0x0C	/* DMA Descriptor List R/W Pointer and Status */
+
+#define AST_UDC_EP_BASE			0x200
+#define AST_UDC_EP_OFFSET		0x10
+
+/* EP config reg */
+#define EP_SET_MAX_PKT(x)		((x & 0x3ff) << 16)
+#define EP_DATA_FETCH_CTRL(x)		((x & 0x3) << 14)
+#define EP_AUTO_DATA_DISABLE		(0x1 << 13)
+#define EP_SET_EP_STALL			(0x1 << 12)
+#define EP_SET_EP_NUM(x)		((x & 0xf) << 8)
+#define EP_SET_TYPE_MASK(x)		((x) << 5)
+#define EP_TYPE_BULK			(0x1)
+#define EP_TYPE_INT			(0x2)
+#define EP_TYPE_ISO			(0x3)
+#define EP_DIR_OUT			(0x1 << 4)
+#define EP_ALLOCATED_MASK		(0x7 << 1)
+#define EP_ENABLE			BIT(0)
+
+/* EP DMA ctrl reg */
+#define EP_DMA_CTRL_GET_PROC_STS(x)	((x >> 4) & 0xf)
+#define EP_DMA_CTRL_STS_RX_IDLE		0x0
+#define EP_DMA_CTRL_STS_TX_IDLE		0x8
+#define EP_DMA_CTRL_IN_LONG_MODE	(0x1 << 3)
+#define EP_DMA_CTRL_RESET		(0x1 << 2)
+#define EP_DMA_SINGLE_STAGE		(0x1 << 1)
+#define EP_DMA_DESC_MODE		(0x1 << 0)
+
+/* EP DMA status reg */
+#define EP_DMA_SET_TX_SIZE(x)		((x & 0x7ff) << 16)
+#define EP_DMA_GET_TX_SIZE(x)		(((x) >> 16) & 0x7ff)
+#define EP_DMA_GET_RPTR(x)		(((x) >> 8) & 0xff)
+#define EP_DMA_GET_WPTR(x)		((x) & 0xff)
+#define EP_DMA_SINGLE_KICK		(1 << 0) /* WPTR = 1 for single mode */
+
+/* EP desc reg */
+#define AST_EP_DMA_DESC_INTR_ENABLE	BIT(31)
+#define AST_EP_DMA_DESC_PID_DATA0	(0 << 14)
+#define AST_EP_DMA_DESC_PID_DATA2	BIT(14)
+#define AST_EP_DMA_DESC_PID_DATA1	(2 << 14)
+#define AST_EP_DMA_DESC_PID_MDATA	(3 << 14)
+#define EP_DESC1_IN_LEN(x)		((x) & 0x1fff)
+#define AST_EP_DMA_DESC_MAX_LEN		(7680) /* Max packet length for trasmit in 1 desc */
+
+struct ast_udc_request {
+	struct usb_request	req;
+	struct list_head	queue;
+	unsigned		mapped:1;
+	unsigned int		actual_dma_length;
+	u32			saved_dma_wptr;
+};
+
+#define to_ast_req(__req) container_of(__req, struct ast_udc_request, req)
+
+struct ast_dma_desc {
+	u32	des_0;
+	u32	des_1;
+};
+
+struct ast_udc_ep {
+	struct usb_ep			ep;
+
+	/* Request queue */
+	struct list_head		queue;
+
+	struct ast_udc_dev		*udc;
+	void __iomem			*ep_reg;
+	void				*epn_buf;
+	dma_addr_t			epn_buf_dma;
+	const struct usb_endpoint_descriptor	*desc;
+
+	/* DMA Descriptors */
+	struct ast_dma_desc		*descs;
+	dma_addr_t			descs_dma;
+	u32				descs_wptr;
+	u32				chunk_max;
+
+	bool				dir_in:1;
+	unsigned			stopped:1;
+	bool				desc_mode:1;
+};
+
+#define to_ast_ep(__ep) container_of(__ep, struct ast_udc_ep, ep)
+
+struct ast_udc_dev {
+	struct platform_device		*pdev;
+	void __iomem			*reg;
+	int				irq;
+	spinlock_t			lock;
+	struct clk			*clk;
+	struct work_struct		wake_work;
+
+	/* EP0 DMA buffers allocated in one chunk */
+	void				*ep0_buf;
+	dma_addr_t			ep0_buf_dma;
+	struct ast_udc_ep		ep[AST_UDC_NUM_ENDPOINTS];
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	void __iomem			*creq;
+	enum usb_device_state		suspended_from;
+	int				desc_mode;
+
+	/* Force full speed only */
+	bool				force_usb1:1;
+	unsigned			is_control_tx:1;
+	bool				wakeup_en:1;
+};
+
+#define to_ast_dev(__g) container_of(__g, struct ast_udc_dev, gadget)
+
+static const char * const ast_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4"
+};
+
+#ifdef AST_UDC_DEBUG_ALL
+#define AST_UDC_DEBUG
+#define AST_SETUP_DEBUG
+#define AST_EP_DEBUG
+#define AST_ISR_DEBUG
+#endif
+
+#ifdef AST_SETUP_DEBUG
+#define SETUP_DBG(u, fmt, ...)	\
+	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__)
+#else
+#define SETUP_DBG(u, fmt, ...)
+#endif
+
+#ifdef AST_EP_DEBUG
+#define EP_DBG(e, fmt, ...)	\
+	dev_dbg(&(e)->udc->pdev->dev, "%s():%s " fmt, __func__,	\
+		 (e)->ep.name, ##__VA_ARGS__)
+#else
+#define EP_DBG(ep, fmt, ...)	((void)(ep))
+#endif
+
+#ifdef AST_UDC_DEBUG
+#define UDC_DBG(u, fmt, ...)	\
+	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__)
+#else
+#define UDC_DBG(u, fmt, ...)
+#endif
+
+#ifdef AST_ISR_DEBUG
+#define ISR_DBG(u, fmt, ...)	\
+	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__)
+#else
+#define ISR_DBG(u, fmt, ...)
+#endif
+
+/*-------------------------------------------------------------------------*/
+#define ast_udc_read(udc, offset) \
+	readl((udc)->reg + (offset))
+#define ast_udc_write(udc, val, offset) \
+	writel((val), (udc)->reg + (offset))
+
+#define ast_ep_read(ep, reg) \
+	readl((ep)->ep_reg + (reg))
+#define ast_ep_write(ep, val, reg) \
+	writel((val), (ep)->ep_reg + (reg))
+
+/*-------------------------------------------------------------------------*/
+
+static void ast_udc_done(struct ast_udc_ep *ep, struct ast_udc_request *req,
+			 int status)
+{
+	struct ast_udc_dev *udc = ep->udc;
+
+	EP_DBG(ep, "req @%p, len (%d/%d), buf:0x%x, dir:0x%x\n",
+	       req, req->req.actual, req->req.length,
+	       (u32)req->req.buf, ep->dir_in);
+
+	list_del(&req->queue);
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (status && status != -ESHUTDOWN)
+		EP_DBG(ep, "done req:%p, status:%d\n", req, status);
+
+	spin_unlock(&udc->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&udc->lock);
+}
+
+static void ast_udc_nuke(struct ast_udc_ep *ep, int status)
+{
+	int count = 0;
+
+	while (!list_empty(&ep->queue)) {
+		struct ast_udc_request *req;
+
+		req = list_entry(ep->queue.next, struct ast_udc_request,
+				 queue);
+		ast_udc_done(ep, req, status);
+		count++;
+	}
+
+	if (count)
+		EP_DBG(ep, "Nuked %d request(s)\n", count);
+}
+
+/*
+ * Stop activity on all endpoints.
+ * Device controller for which EP activity is to be stopped.
+ *
+ * All the endpoints are stopped and any pending transfer requests if any on
+ * the endpoint are terminated.
+ */
+static void ast_udc_stop_activity(struct ast_udc_dev *udc)
+{
+	struct ast_udc_ep *ep;
+	int i;
+
+	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		ep->stopped = 1;
+		ast_udc_nuke(ep, -ESHUTDOWN);
+	}
+}
+
+static int ast_udc_ep_enable(struct usb_ep *_ep,
+			     const struct usb_endpoint_descriptor *desc)
+{
+	u16 maxpacket = usb_endpoint_maxp(desc);
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	u8 epnum = usb_endpoint_num(desc);
+	unsigned long flags;
+	u32 ep_conf = 0;
+	u8 dir_in;
+	u8 type;
+
+	if (!_ep || !ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT ||
+	    maxpacket == 0 || maxpacket > ep->ep.maxpacket) {
+		EP_DBG(ep, "Failed, invalid EP enable param\n");
+		return -EINVAL;
+	}
+
+	if (!udc->driver) {
+		EP_DBG(ep, "bogus device state\n");
+		return -ESHUTDOWN;
+	}
+
+	EP_DBG(ep, "maxpacket:0x%x\n", maxpacket);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	ep->desc = desc;
+	ep->stopped = 0;
+	ep->ep.maxpacket = maxpacket;
+	ep->chunk_max = AST_EP_DMA_DESC_MAX_LEN;
+
+	if (maxpacket < AST_UDC_EPn_MAX_PACKET)
+		ep_conf = EP_SET_MAX_PKT(maxpacket);
+
+	ep_conf |= EP_SET_EP_NUM(epnum);
+
+	type = usb_endpoint_type(desc);
+	dir_in = usb_endpoint_dir_in(desc);
+	ep->dir_in = dir_in;
+	if (!ep->dir_in)
+		ep_conf |= EP_DIR_OUT;
+
+	EP_DBG(ep, "type %d, dir_in %d\n", type, dir_in);
+	switch (type) {
+	case USB_ENDPOINT_XFER_ISOC:
+		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_ISO);
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_BULK);
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_INT);
+		break;
+	}
+
+	ep->desc_mode = udc->desc_mode && ep->descs_dma && ep->dir_in;
+	if (ep->desc_mode) {
+		ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL);
+		ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS);
+		ast_ep_write(ep, ep->descs_dma, AST_UDC_EP_DMA_BUFF);
+
+		/* Enable Long Descriptor Mode */
+		ast_ep_write(ep, EP_DMA_CTRL_IN_LONG_MODE | EP_DMA_DESC_MODE,
+			     AST_UDC_EP_DMA_CTRL);
+
+		ep->descs_wptr = 0;
+
+	} else {
+		ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL);
+		ast_ep_write(ep, EP_DMA_SINGLE_STAGE, AST_UDC_EP_DMA_CTRL);
+		ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS);
+	}
+
+	/* Cleanup data toggle just in case */
+	ast_udc_write(udc, EP_TOGGLE_SET_EPNUM(epnum), AST_VHUB_EP_DATA);
+
+	/* Enable EP */
+	ast_ep_write(ep, ep_conf | EP_ENABLE, AST_UDC_EP_CONFIG);
+
+	EP_DBG(ep, "ep_config: 0x%x\n", ast_ep_read(ep, AST_UDC_EP_CONFIG));
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int ast_udc_ep_disable(struct usb_ep *_ep)
+{
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	ep->ep.desc = NULL;
+	ep->stopped = 1;
+
+	ast_udc_nuke(ep, -ESHUTDOWN);
+	ast_ep_write(ep, 0, AST_UDC_EP_CONFIG);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static struct usb_request *ast_udc_ep_alloc_request(struct usb_ep *_ep,
+						    gfp_t gfp_flags)
+{
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_request *req;
+
+	req = kzalloc(sizeof(struct ast_udc_request), gfp_flags);
+	if (!req) {
+		EP_DBG(ep, "request allocation failed\n");
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void ast_udc_ep_free_request(struct usb_ep *_ep,
+				    struct usb_request *_req)
+{
+	struct ast_udc_request *req = to_ast_req(_req);
+
+	kfree(req);
+}
+
+static int ast_dma_descriptor_setup(struct ast_udc_ep *ep, u32 dma_buf,
+				    u16 tx_len, struct ast_udc_request *req)
+{
+	struct ast_udc_dev *udc = ep->udc;
+	struct device *dev = &udc->pdev->dev;
+	u32 offset, chunk;
+	int count, last;
+
+	if (!ep->descs) {
+		dev_warn(dev, "%s: Empty DMA descs list failure\n",
+			 ep->ep.name);
+		return -EINVAL;
+	}
+
+	chunk = tx_len;
+	offset = count = last = 0;
+
+	EP_DBG(ep, "req @%p, %s:%d, %s:0x%x, %s:0x%x\n", req,
+	       "wptr", ep->descs_wptr, "dma_buf", dma_buf,
+	       "tx_len", tx_len);
+
+	/* Create Descriptor Lists */
+	while (chunk >= 0 && !last && count < AST_UDC_DESCS_COUNT) {
+
+		ep->descs[ep->descs_wptr].des_0 = dma_buf + offset;
+
+		if (chunk <= ep->chunk_max) {
+			ep->descs[ep->descs_wptr].des_1 = chunk;
+			last = 1;
+		} else {
+			ep->descs[ep->descs_wptr].des_1 = ep->chunk_max;
+			chunk -= ep->chunk_max;
+		}
+
+		EP_DBG(ep, "descs[%d]: 0x%x 0x%x, last:%d\n",
+		       ep->descs_wptr,
+		       ep->descs[ep->descs_wptr].des_0,
+		       ep->descs[ep->descs_wptr].des_1,
+		       last);
+
+		if (count == 0)
+			req->saved_dma_wptr = ep->descs_wptr;
+
+		ep->descs_wptr++;
+		count++;
+
+		if (ep->descs_wptr >= AST_UDC_DESCS_COUNT)
+			ep->descs_wptr = 0;
+
+		offset = ep->chunk_max * count;
+	}
+
+	return 0;
+}
+
+static void ast_udc_epn_kick(struct ast_udc_ep *ep, struct ast_udc_request *req)
+{
+	u32 tx_len;
+	u32 last;
+
+	last = req->req.length - req->req.actual;
+	tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last;
+
+	EP_DBG(ep, "kick req @%p, len:%d, dir:%d\n",
+	       req, tx_len, ep->dir_in);
+
+	ast_ep_write(ep, req->req.dma + req->req.actual, AST_UDC_EP_DMA_BUFF);
+
+	/* Start DMA */
+	ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len), AST_UDC_EP_DMA_STS);
+	ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len) | EP_DMA_SINGLE_KICK,
+		     AST_UDC_EP_DMA_STS);
+}
+
+static void ast_udc_epn_kick_desc(struct ast_udc_ep *ep,
+				  struct ast_udc_request *req)
+{
+	u32 descs_max_size;
+	u32 tx_len;
+	u32 last;
+
+	descs_max_size = AST_EP_DMA_DESC_MAX_LEN * AST_UDC_DESCS_COUNT;
+
+	last = req->req.length - req->req.actual;
+	tx_len = last > descs_max_size ? descs_max_size : last;
+
+	EP_DBG(ep, "kick req @%p, %s:%d, %s:0x%x, %s:0x%x (%d/%d), %s:0x%x\n",
+	       req, "tx_len", tx_len, "dir_in", ep->dir_in,
+	       "dma", req->req.dma + req->req.actual,
+	       req->req.actual, req->req.length,
+	       "descs_max_size", descs_max_size);
+
+	if (!ast_dma_descriptor_setup(ep, req->req.dma + req->req.actual,
+				      tx_len, req))
+		req->actual_dma_length += tx_len;
+
+	/* make sure CPU done everything before triggering DMA */
+	mb();
+
+	ast_ep_write(ep, ep->descs_wptr, AST_UDC_EP_DMA_STS);
+
+	EP_DBG(ep, "descs_wptr:%d, dstat:0x%x, dctrl:0x%x\n",
+	       ep->descs_wptr,
+	       ast_ep_read(ep, AST_UDC_EP_DMA_STS),
+	       ast_ep_read(ep, AST_UDC_EP_DMA_CTRL));
+}
+
+static void ast_udc_ep0_queue(struct ast_udc_ep *ep,
+			      struct ast_udc_request *req)
+{
+	struct ast_udc_dev *udc = ep->udc;
+	u32 tx_len;
+	u32 last;
+
+	last = req->req.length - req->req.actual;
+	tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last;
+
+	ast_udc_write(udc, req->req.dma + req->req.actual,
+		      AST_UDC_EP0_DATA_BUFF);
+
+	if (ep->dir_in) {
+		/* IN requests, send data */
+		SETUP_DBG(udc, "IN: %s:0x%x, %s:0x%x, %s:%d (%d/%d), %s:%d\n",
+			  "buf", (u32)req->req.buf,
+			  "dma", req->req.dma + req->req.actual,
+			  "tx_len", tx_len,
+			  req->req.actual, req->req.length,
+			  "dir_in", ep->dir_in);
+
+		req->req.actual += tx_len;
+		ast_udc_write(udc, EP0_TX_LEN(tx_len), AST_UDC_EP0_CTRL);
+		ast_udc_write(udc, EP0_TX_LEN(tx_len) | EP0_TX_BUFF_RDY,
+			      AST_UDC_EP0_CTRL);
+
+	} else {
+		/* OUT requests, receive data */
+		SETUP_DBG(udc, "OUT: %s:%x, %s:%x, %s:(%d/%d), %s:%d\n",
+			  "buf", (u32)req->req.buf,
+			  "dma", req->req.dma + req->req.actual,
+			  "len", req->req.actual, req->req.length,
+			  "dir_in", ep->dir_in);
+
+		if (!req->req.length) {
+			/* 0 len request, send tx as completion */
+			ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
+			ep->dir_in = 0x1;
+		} else
+			ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL);
+	}
+}
+
+static int ast_udc_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+			    gfp_t gfp_flags)
+{
+	struct ast_udc_request *req = to_ast_req(_req);
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	struct device *dev = &udc->pdev->dev;
+	unsigned long flags;
+	int rc;
+
+	if (unlikely(!_req || !_req->complete || !_req->buf || !_ep)) {
+		dev_warn(dev, "Invalid EP request !\n");
+		return -EINVAL;
+	}
+
+	if (ep->stopped) {
+		dev_warn(dev, "%s is already stopped !\n", _ep->name);
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+	req->actual_dma_length = 0;
+
+	rc = usb_gadget_map_request(&udc->gadget, &req->req, ep->dir_in);
+	if (rc) {
+		EP_DBG(ep, "Request mapping failure %d\n", rc);
+		dev_warn(dev, "Request mapping failure %d\n", rc);
+		goto end;
+	}
+
+	EP_DBG(ep, "enqueue req @%p\n", req);
+	EP_DBG(ep, "l=%d, dma:0x%x, zero:%d, is_in:%d\n",
+		_req->length, _req->dma, _req->zero, ep->dir_in);
+
+	/* EP0 request enqueue */
+	if (ep->ep.desc == NULL) {
+		if ((req->req.dma % 4) != 0) {
+			dev_warn(dev, "EP0 req dma alignment error\n");
+			return -ESHUTDOWN;
+		}
+
+		ast_udc_ep0_queue(ep, req);
+		goto end;
+	}
+
+	/* EPn request enqueue */
+	if (list_is_singular(&ep->queue)) {
+		if (ep->desc_mode)
+			ast_udc_epn_kick_desc(ep, req);
+		else
+			ast_udc_epn_kick(ep, req);
+	}
+
+end:
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return rc;
+}
+
+static int ast_udc_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	struct ast_udc_request *req;
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req) {
+			list_del_init(&req->queue);
+			ast_udc_done(ep, req, -ESHUTDOWN);
+			_req->status = -ECONNRESET;
+			break;
+		}
+	}
+
+	/* dequeue request not found */
+	if (&req->req != _req)
+		rc = -EINVAL;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return rc;
+}
+
+static int ast_udc_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	unsigned long flags;
+	int epnum;
+	u32 ctrl;
+
+	EP_DBG(ep, "val:%d\n", value);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	epnum = usb_endpoint_num(ep->desc);
+
+	/* EP0 */
+	if (epnum == 0) {
+		ctrl = ast_udc_read(udc, AST_UDC_EP0_CTRL);
+		if (value)
+			ctrl |= EP0_STALL;
+		else
+			ctrl &= ~EP0_STALL;
+
+		ast_udc_write(udc, ctrl, AST_UDC_EP0_CTRL);
+
+	} else {
+	/* EPn */
+		ctrl = ast_udc_read(udc, AST_UDC_EP_CONFIG);
+		if (value)
+			ctrl |= EP_SET_EP_STALL;
+		else
+			ctrl &= ~EP_SET_EP_STALL;
+
+		ast_ep_write(ep, ctrl, AST_UDC_EP_CONFIG);
+
+		/* only epn is stopped and waits for clear */
+		ep->stopped = value ? 1 : 0;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_ep_ops ast_udc_ep_ops = {
+	.enable		= ast_udc_ep_enable,
+	.disable	= ast_udc_ep_disable,
+	.alloc_request	= ast_udc_ep_alloc_request,
+	.free_request	= ast_udc_ep_free_request,
+	.queue		= ast_udc_ep_queue,
+	.dequeue	= ast_udc_ep_dequeue,
+	.set_halt	= ast_udc_ep_set_halt,
+	/* there's only imprecise fifo status reporting */
+};
+
+static void ast_udc_ep0_rx(struct ast_udc_dev *udc)
+{
+	ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
+	ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL);
+}
+
+static void ast_udc_ep0_tx(struct ast_udc_dev *udc)
+{
+	ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
+	ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
+}
+
+static void ast_udc_ep0_out(struct ast_udc_dev *udc)
+{
+	struct device *dev = &udc->pdev->dev;
+	struct ast_udc_ep *ep = &udc->ep[0];
+	struct ast_udc_request *req;
+	u16 rx_len;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	req = list_entry(ep->queue.next, struct ast_udc_request, queue);
+
+	rx_len = EP0_GET_RX_LEN(ast_udc_read(udc, AST_UDC_EP0_CTRL));
+	req->req.actual += rx_len;
+
+	SETUP_DBG(udc, "req %p (%d/%d)\n", req,
+		  req->req.actual, req->req.length);
+
+	if ((rx_len < ep->ep.maxpacket) ||
+	    (req->req.actual == req->req.length)) {
+		ast_udc_ep0_tx(udc);
+		if (!ep->dir_in)
+			ast_udc_done(ep, req, 0);
+
+	} else {
+		if (rx_len > req->req.length) {
+			// Issue Fix
+			dev_warn(dev, "Something wrong (%d/%d)\n",
+				 req->req.actual, req->req.length);
+			ast_udc_ep0_tx(udc);
+			ast_udc_done(ep, req, 0);
+			return;
+		}
+
+		ep->dir_in = 0;
+
+		/* More works */
+		ast_udc_ep0_queue(ep, req);
+	}
+}
+
+static void ast_udc_ep0_in(struct ast_udc_dev *udc)
+{
+	struct ast_udc_ep *ep = &udc->ep[0];
+	struct ast_udc_request *req;
+
+	if (list_empty(&ep->queue)) {
+		if (udc->is_control_tx) {
+			ast_udc_ep0_rx(udc);
+			udc->is_control_tx = 0;
+		}
+
+		return;
+	}
+
+	req = list_entry(ep->queue.next, struct ast_udc_request, queue);
+
+	SETUP_DBG(udc, "req %p (%d/%d)\n", req,
+		  req->req.actual, req->req.length);
+
+	if (req->req.length == req->req.actual) {
+		if (req->req.length)
+			ast_udc_ep0_rx(udc);
+
+		if (ep->dir_in)
+			ast_udc_done(ep, req, 0);
+
+	} else {
+		/* More works */
+		ast_udc_ep0_queue(ep, req);
+	}
+}
+
+static void ast_udc_epn_handle(struct ast_udc_dev *udc, u16 ep_num)
+{
+	struct ast_udc_ep *ep = &udc->ep[ep_num];
+	struct ast_udc_request *req;
+	u16 len = 0;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	req = list_first_entry(&ep->queue, struct ast_udc_request, queue);
+
+	len = EP_DMA_GET_TX_SIZE(ast_ep_read(ep, AST_UDC_EP_DMA_STS));
+	req->req.actual += len;
+
+	EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req,
+		req->req.actual, req->req.length, "len", len);
+
+	/* Done this request */
+	if (req->req.length == req->req.actual) {
+		ast_udc_done(ep, req, 0);
+		req = list_first_entry_or_null(&ep->queue,
+					       struct ast_udc_request,
+					       queue);
+
+	} else {
+		/* Check for short packet */
+		if (len < ep->ep.maxpacket) {
+			ast_udc_done(ep, req, 0);
+			req = list_first_entry_or_null(&ep->queue,
+						       struct ast_udc_request,
+						       queue);
+		}
+	}
+
+	/* More requests */
+	if (req)
+		ast_udc_epn_kick(ep, req);
+}
+
+static void ast_udc_epn_handle_desc(struct ast_udc_dev *udc, u16 ep_num)
+{
+	struct ast_udc_ep *ep = &udc->ep[ep_num];
+	struct device *dev = &udc->pdev->dev;
+	struct ast_udc_request *req;
+	u32 proc_sts, wr_ptr, rd_ptr;
+	u32 len_in_desc, ctrl;
+	u16 total_len = 0;
+	int i;
+
+	if (list_empty(&ep->queue)) {
+		dev_warn(dev, "%s reqest queue empty !\n", ep->ep.name);
+		return;
+	}
+
+	req = list_first_entry(&ep->queue, struct ast_udc_request, queue);
+
+	ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_CTRL);
+	proc_sts = EP_DMA_CTRL_GET_PROC_STS(ctrl);
+
+	/* Check processing status is idle */
+	if (proc_sts != EP_DMA_CTRL_STS_RX_IDLE &&
+	    proc_sts != EP_DMA_CTRL_STS_TX_IDLE) {
+		dev_warn(dev, "EP DMA CTRL: 0x%x, PS:0x%x\n",
+			 ast_ep_read(ep, AST_UDC_EP_DMA_CTRL),
+			 proc_sts);
+		return;
+	}
+
+	ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_STS);
+	rd_ptr = EP_DMA_GET_RPTR(ctrl);
+	wr_ptr = EP_DMA_GET_WPTR(ctrl);
+
+	if (rd_ptr != wr_ptr) {
+		dev_warn(dev, "desc list is not empty ! %s:%d, %s:%d\n",
+		"rptr", rd_ptr, "wptr", wr_ptr);
+		return;
+	}
+
+	EP_DBG(ep, "rd_ptr:%d, wr_ptr:%d\n", rd_ptr, wr_ptr);
+	i = req->saved_dma_wptr;
+
+	do {
+		len_in_desc = EP_DESC1_IN_LEN(ep->descs[i].des_1);
+		EP_DBG(ep, "desc[%d] len: %d\n", i, len_in_desc);
+		total_len += len_in_desc;
+		i++;
+		if (i >= AST_UDC_DESCS_COUNT)
+			i = 0;
+
+	} while (i != wr_ptr);
+
+	req->req.actual += total_len;
+
+	EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req,
+		req->req.actual, req->req.length, "len", total_len);
+
+	/* Done this request */
+	if (req->req.length == req->req.actual) {
+		ast_udc_done(ep, req, 0);
+		req = list_first_entry_or_null(&ep->queue,
+					       struct ast_udc_request,
+					       queue);
+
+	} else {
+		/* Check for short packet */
+		if (total_len < ep->ep.maxpacket) {
+			ast_udc_done(ep, req, 0);
+			req = list_first_entry_or_null(&ep->queue,
+						       struct ast_udc_request,
+						       queue);
+		}
+	}
+
+	/* More requests & dma descs not setup yet */
+	if (req && (req->actual_dma_length == req->req.actual)) {
+		EP_DBG(ep, "More requests\n");
+		ast_udc_epn_kick_desc(ep, req);
+	}
+}
+
+static void ast_udc_ep0_data_tx(struct ast_udc_dev *udc, u8 *tx_data, u32 len)
+{
+	if (len) {
+		memcpy(udc->ep0_buf, tx_data, len);
+
+		ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
+		ast_udc_write(udc, EP0_TX_LEN(len), AST_UDC_EP0_CTRL);
+		ast_udc_write(udc, EP0_TX_LEN(len) | EP0_TX_BUFF_RDY,
+			      AST_UDC_EP0_CTRL);
+		udc->is_control_tx = 1;
+
+	} else
+		ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
+}
+
+static void ast_udc_getstatus(struct ast_udc_dev *udc)
+{
+	struct usb_ctrlrequest crq;
+	struct ast_udc_ep *ep;
+	u16 status = 0;
+	u16 epnum = 0;
+
+	memcpy_fromio(&crq, udc->creq, sizeof(crq));
+
+	switch (crq.bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		/* Get device status */
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		break;
+	case USB_RECIP_INTERFACE:
+		break;
+	case USB_RECIP_ENDPOINT:
+		epnum = crq.wIndex & USB_ENDPOINT_NUMBER_MASK;
+		status = udc->ep[epnum].stopped;
+		break;
+	default:
+		goto stall;
+	}
+
+	ep = &udc->ep[epnum];
+	EP_DBG(ep, "status: 0x%x\n", status);
+	ast_udc_ep0_data_tx(udc, (u8 *)&status, sizeof(status));
+
+	return;
+
+stall:
+	EP_DBG(ep, "Can't respond request\n");
+	ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL,
+		      AST_UDC_EP0_CTRL);
+}
+
+static void ast_udc_ep0_handle_setup(struct ast_udc_dev *udc)
+{
+	struct ast_udc_ep *ep = &udc->ep[0];
+	struct ast_udc_request *req;
+	struct usb_ctrlrequest crq;
+	int req_num = 0;
+	int rc = 0;
+	u32 reg;
+
+	memcpy_fromio(&crq, udc->creq, sizeof(crq));
+
+	SETUP_DBG(udc, "SETEUP packet: %02x/%02x/%04x/%04x/%04x\n",
+		  crq.bRequestType, crq.bRequest, le16_to_cpu(crq.wValue),
+		  le16_to_cpu(crq.wIndex), le16_to_cpu(crq.wLength));
+
+	/*
+	 * Cleanup ep0 request(s) in queue because
+	 * there is a new control setup comes.
+	 */
+	list_for_each_entry(req, &udc->ep[0].queue, queue) {
+		req_num++;
+		EP_DBG(ep, "there is req %p in ep0 queue !\n", req);
+	}
+
+	if (req_num)
+		ast_udc_nuke(&udc->ep[0], -ETIMEDOUT);
+
+	udc->ep[0].dir_in = crq.bRequestType & USB_DIR_IN;
+
+	if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (crq.bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			if (ast_udc_read(udc, AST_UDC_STS) & UDC_STS_HIGHSPEED)
+				udc->gadget.speed = USB_SPEED_HIGH;
+			else
+				udc->gadget.speed = USB_SPEED_FULL;
+
+			SETUP_DBG(udc, "set addr: 0x%x\n", crq.wValue);
+			reg = ast_udc_read(udc, AST_UDC_CONFIG);
+			reg &= ~UDC_CFG_ADDR_MASK;
+			reg |= UDC_CFG_SET_ADDR(crq.wValue);
+			ast_udc_write(udc, reg, AST_UDC_CONFIG);
+			goto req_complete;
+
+		case USB_REQ_CLEAR_FEATURE:
+			SETUP_DBG(udc, "ep0: CLEAR FEATURE\n");
+			goto req_driver;
+
+		case USB_REQ_SET_FEATURE:
+			SETUP_DBG(udc, "ep0: SET FEATURE\n");
+			goto req_driver;
+
+		case USB_REQ_GET_STATUS:
+			ast_udc_getstatus(udc);
+			return;
+
+		default:
+			goto req_driver;
+		}
+
+	}
+
+req_driver:
+	if (udc->driver) {
+		SETUP_DBG(udc, "Forwarding %s to gadget...\n",
+			  udc->gadget.name);
+
+		spin_unlock(&udc->lock);
+		rc = udc->driver->setup(&udc->gadget, &crq);
+		spin_lock(&udc->lock);
+
+	} else {
+		SETUP_DBG(udc, "No gadget for request !\n");
+	}
+
+	if (rc >= 0)
+		return;
+
+	/* Stall if gadget failed */
+	SETUP_DBG(udc, "Stalling, rc:0x%x\n", rc);
+	ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL,
+		      AST_UDC_EP0_CTRL);
+	return;
+
+req_complete:
+	SETUP_DBG(udc, "ep0: Sending IN status without data\n");
+	ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
+}
+
+static irqreturn_t ast_udc_isr(int irq, void *data)
+{
+	struct ast_udc_dev *udc = (struct ast_udc_dev *)data;
+	struct ast_udc_ep *ep;
+	u32 isr, ep_isr;
+	int i;
+
+	spin_lock(&udc->lock);
+
+	isr = ast_udc_read(udc, AST_UDC_ISR);
+	if (!isr)
+		goto done;
+
+	/* Ack interrupts */
+	ast_udc_write(udc, isr, AST_UDC_ISR);
+
+	if (isr & UDC_IRQ_BUS_RESET) {
+		ISR_DBG(udc, "UDC_IRQ_BUS_RESET\n");
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+		ep = &udc->ep[1];
+		EP_DBG(ep, "dctrl:0x%x\n",
+		       ast_ep_read(ep, AST_UDC_EP_DMA_CTRL));
+
+		if (udc->driver && udc->driver->reset) {
+			spin_unlock(&udc->lock);
+			udc->driver->reset(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (isr & UDC_IRQ_BUS_SUSPEND) {
+		ISR_DBG(udc, "UDC_IRQ_BUS_SUSPEND\n");
+		udc->suspended_from = udc->gadget.state;
+		usb_gadget_set_state(&udc->gadget, USB_STATE_SUSPENDED);
+
+		if (udc->driver && udc->driver->suspend) {
+			spin_unlock(&udc->lock);
+			udc->driver->suspend(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (isr & UDC_IRQ_BUS_RESUME) {
+		ISR_DBG(udc, "UDC_IRQ_BUS_RESUME\n");
+		usb_gadget_set_state(&udc->gadget, udc->suspended_from);
+
+		if (udc->driver && udc->driver->resume) {
+			spin_unlock(&udc->lock);
+			udc->driver->resume(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (isr & UDC_IRQ_EP0_IN_ACK_STALL) {
+		ISR_DBG(udc, "UDC_IRQ_EP0_IN_ACK_STALL\n");
+		ast_udc_ep0_in(udc);
+	}
+
+	if (isr & UDC_IRQ_EP0_OUT_ACK_STALL) {
+		ISR_DBG(udc, "UDC_IRQ_EP0_OUT_ACK_STALL\n");
+		ast_udc_ep0_out(udc);
+	}
+
+	if (isr & UDC_IRQ_EP0_SETUP) {
+		ISR_DBG(udc, "UDC_IRQ_EP0_SETUP\n");
+		ast_udc_ep0_handle_setup(udc);
+	}
+
+	if (isr & UDC_IRQ_EP_POOL_ACK_STALL) {
+		ISR_DBG(udc, "UDC_IRQ_EP_POOL_ACK_STALL\n");
+		ep_isr = ast_udc_read(udc, AST_UDC_EP_ACK_ISR);
+
+		/* Ack EP interrupts */
+		ast_udc_write(udc, ep_isr, AST_UDC_EP_ACK_ISR);
+
+		/* Handle each EP */
+		for (i = 0; i < AST_UDC_NUM_ENDPOINTS - 1; i++) {
+			if (ep_isr & (0x1 << i)) {
+				ep = &udc->ep[i + 1];
+				if (ep->desc_mode)
+					ast_udc_epn_handle_desc(udc, i + 1);
+				else
+					ast_udc_epn_handle(udc, i + 1);
+			}
+		}
+	}
+
+done:
+	spin_unlock(&udc->lock);
+	return IRQ_HANDLED;
+}
+
+static int ast_udc_gadget_getframe(struct usb_gadget *gadget)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+
+	return (ast_udc_read(udc, AST_UDC_STS) >> 16) & 0x7ff;
+}
+
+static void ast_udc_wake_work(struct work_struct *work)
+{
+	struct ast_udc_dev *udc = container_of(work, struct ast_udc_dev,
+					       wake_work);
+	unsigned long flags;
+	u32 ctrl;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	UDC_DBG(udc, "Wakeup Host !\n");
+	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL);
+	ast_udc_write(udc, ctrl | USB_REMOTE_WAKEUP_EN, AST_UDC_FUNC_CTRL);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static void ast_udc_wakeup_all(struct ast_udc_dev *udc)
+{
+	/*
+	 * A device is trying to wake the world, because this
+	 * can recurse into the device, we break the call chain
+	 * using a work queue
+	 */
+	schedule_work(&udc->wake_work);
+}
+
+static int ast_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!udc->wakeup_en) {
+		UDC_DBG(udc, "Remote Wakeup is disabled\n");
+		rc = -EINVAL;
+		goto err;
+	}
+
+	UDC_DBG(udc, "Device initiated wakeup\n");
+	ast_udc_wakeup_all(udc);
+
+err:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return rc;
+}
+
+/*
+ * Activate/Deactivate link with host
+ */
+static int ast_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+	unsigned long flags;
+	u32 ctrl;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	UDC_DBG(udc, "is_on: %d\n", is_on);
+	if (is_on)
+		ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) | USB_UPSTREAM_EN;
+	else
+		ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
+
+	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int ast_udc_start(struct usb_gadget *gadget,
+			 struct usb_gadget_driver *driver)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+	struct ast_udc_ep *ep;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	UDC_DBG(udc, "\n");
+	udc->driver = driver;
+	udc->gadget.dev.of_node = udc->pdev->dev.of_node;
+
+	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		ep->stopped = 0;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int ast_udc_stop(struct usb_gadget *gadget)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+	unsigned long flags;
+	u32 ctrl;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	UDC_DBG(udc, "\n");
+	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
+	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->driver = NULL;
+
+	ast_udc_stop_activity(udc);
+	usb_gadget_set_state(&udc->gadget, USB_STATE_NOTATTACHED);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops ast_udc_ops = {
+	.get_frame		= ast_udc_gadget_getframe,
+	.wakeup			= ast_udc_wakeup,
+	.pullup			= ast_udc_pullup,
+	.udc_start		= ast_udc_start,
+	.udc_stop		= ast_udc_stop,
+};
+
+/*
+ * Support 1 Control Endpoint.
+ * Support multiple programmable endpoints that can be configured to
+ * Bulk IN/OUT, Interrupt IN/OUT, and Isochronous IN/OUT type endpoint.
+ */
+static void ast_udc_init_ep(struct ast_udc_dev *udc)
+{
+	struct ast_udc_ep *ep;
+	int i;
+
+	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		ep->ep.name = ast_ep_name[i];
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+
+		ep->ep.ops = &ast_udc_ep_ops;
+		ep->udc = udc;
+
+		INIT_LIST_HEAD(&ep->queue);
+
+		if (i == 0) {
+			usb_ep_set_maxpacket_limit(&ep->ep,
+						   AST_UDC_EP0_MAX_PACKET);
+			continue;
+		}
+
+		ep->ep_reg = udc->reg + AST_UDC_EP_BASE +
+				(AST_UDC_EP_OFFSET * (i - 1));
+
+		ep->epn_buf = udc->ep0_buf + (i * AST_UDC_EP_DMA_SIZE);
+		ep->epn_buf_dma = udc->ep0_buf_dma + (i * AST_UDC_EP_DMA_SIZE);
+		usb_ep_set_maxpacket_limit(&ep->ep, AST_UDC_EPn_MAX_PACKET);
+
+		ep->descs = ep->epn_buf + AST_UDC_EPn_MAX_PACKET;
+		ep->descs_dma = ep->epn_buf_dma + AST_UDC_EPn_MAX_PACKET;
+		ep->descs_wptr = 0;
+
+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+	}
+}
+
+static void ast_udc_init_dev(struct ast_udc_dev *udc)
+{
+	INIT_WORK(&udc->wake_work, ast_udc_wake_work);
+}
+
+static void ast_udc_init_hw(struct ast_udc_dev *udc)
+{
+	u32 ctrl;
+
+	/* Enable PHY */
+	ctrl = USB_PHY_CLK_EN | USB_PHY_RESET_DIS;
+	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+
+	udelay(1);
+	ast_udc_write(udc, 0, AST_UDC_DEV_RESET);
+
+	/* Set descriptor ring size */
+	if (AST_UDC_DESCS_COUNT == 256) {
+		ctrl |= USB_EP_LONG_DESC;
+		ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+	}
+
+	/* Mask & ack all interrupts before installing the handler */
+	ast_udc_write(udc, 0, AST_UDC_IER);
+	ast_udc_write(udc, UDC_IRQ_ACK_ALL, AST_UDC_ISR);
+
+	/* Enable some interrupts */
+	ctrl = UDC_IRQ_EP_POOL_ACK_STALL | UDC_IRQ_BUS_RESUME |
+	       UDC_IRQ_BUS_SUSPEND | UDC_IRQ_BUS_RESET |
+	       UDC_IRQ_EP0_IN_ACK_STALL | UDC_IRQ_EP0_OUT_ACK_STALL |
+	       UDC_IRQ_EP0_SETUP;
+	ast_udc_write(udc, ctrl, AST_UDC_IER);
+
+	/* Cleanup and enable ep ACK interrupts */
+	ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_IER);
+	ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_ISR);
+
+	ast_udc_write(udc, 0, AST_UDC_EP0_CTRL);
+}
+
+static int ast_udc_remove(struct platform_device *pdev)
+{
+	struct ast_udc_dev *udc = platform_get_drvdata(pdev);
+	unsigned long flags;
+	u32 ctrl;
+
+	usb_del_gadget_udc(&udc->gadget);
+	if (udc->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Disable upstream port connection */
+	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
+	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+
+	clk_disable_unprepare(udc->clk);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->ep0_buf)
+		dma_free_coherent(&pdev->dev,
+				  AST_UDC_EP_DMA_SIZE * AST_UDC_NUM_ENDPOINTS,
+				  udc->ep0_buf,
+				  udc->ep0_buf_dma);
+
+	udc->ep0_buf = NULL;
+
+	return 0;
+}
+
+static int ast_udc_probe(struct platform_device *pdev)
+{
+	enum usb_device_speed max_speed;
+	struct device *dev = &pdev->dev;
+	struct ast_udc_dev *udc;
+	struct resource *res;
+	int rc;
+
+	udc = devm_kzalloc(&pdev->dev, sizeof(struct ast_udc_dev), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	udc->gadget.dev.parent = dev;
+	udc->pdev = pdev;
+	spin_lock_init(&udc->lock);
+
+	udc->gadget.ops = &ast_udc_ops;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+	udc->gadget.name = "aspeed-udc";
+	udc->gadget.dev.init_name = "gadget";
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	udc->reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(udc->reg)) {
+		dev_err(&pdev->dev, "Failed to map resources\n");
+		return PTR_ERR(udc->reg);
+	}
+
+	platform_set_drvdata(pdev, udc);
+
+	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(udc->clk)) {
+		rc = PTR_ERR(udc->clk);
+		goto err;
+	}
+	rc = clk_prepare_enable(udc->clk);
+	if (rc) {
+		dev_err(&pdev->dev, "Failed to enable clock (0x%x)\n", rc);
+		goto err;
+	}
+
+	/* Check if we need to limit the HW to USB1 */
+	max_speed = usb_get_maximum_speed(&pdev->dev);
+	if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH)
+		udc->force_usb1 = true;
+
+	/*
+	 * Allocate DMA buffers for all EPs in one chunk
+	 */
+	udc->ep0_buf = dma_alloc_coherent(&pdev->dev,
+					  AST_UDC_EP_DMA_SIZE *
+					  AST_UDC_NUM_ENDPOINTS,
+					  &udc->ep0_buf_dma, GFP_KERNEL);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.max_speed = USB_SPEED_HIGH;
+	udc->creq = udc->reg + AST_UDC_SETUP0;
+
+	/*
+	 * Support single stage mode or 32/256 stages descriptor mode.
+	 * Set default as Descriptor Mode.
+	 */
+	udc->desc_mode = AST_UDC_DESC_MODE;
+
+	dev_info(&pdev->dev, "DMA %s\n", udc->desc_mode ?
+		 "descriptor mode" : "single mode");
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	INIT_LIST_HEAD(&udc->gadget.ep0->ep_list);
+
+	/* Initialized udc ep */
+	ast_udc_init_ep(udc);
+
+	/* Initialized udc device */
+	ast_udc_init_dev(udc);
+
+	/* Initialized udc hardware */
+	ast_udc_init_hw(udc);
+
+	/* Find interrupt and install handler */
+	udc->irq = platform_get_irq(pdev, 0);
+	if (udc->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get interrupt\n");
+		rc = udc->irq;
+		goto err;
+	}
+
+	rc = devm_request_irq(&pdev->dev, udc->irq, ast_udc_isr, 0,
+			      KBUILD_MODNAME, udc);
+	if (rc) {
+		dev_err(&pdev->dev, "Failed to request interrupt\n");
+		goto err;
+	}
+
+	rc = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (rc) {
+		dev_err(&pdev->dev, "Failed to add gadget udc\n");
+		goto err;
+	}
+
+	dev_info(&pdev->dev, "Initialized udc in USB%s mode\n",
+		 udc->force_usb1 ? "1" : "2");
+
+	return 0;
+
+err:
+	dev_err(&pdev->dev, "Failed to udc probe, rc:0x%x\n", rc);
+	ast_udc_remove(pdev);
+
+	return rc;
+}
+
+static const struct of_device_id ast_udc_of_dt_ids[] = {
+	{ .compatible = "aspeed,ast2600-udc", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, ast_udc_of_dt_ids);
+
+static struct platform_driver ast_udc_driver = {
+	.probe			= ast_udc_probe,
+	.remove			= ast_udc_remove,
+	.driver			= {
+		.name			= KBUILD_MODNAME,
+		.of_match_table		= ast_udc_of_dt_ids,
+	},
+};
+
+module_platform_driver(ast_udc_driver);
+
+MODULE_DESCRIPTION("ASPEED UDC driver");
+MODULE_AUTHOR("Neal Liu <neal_liu@aspeedtech.com>");
+MODULE_LICENSE("GPL");