From patchwork Wed May 25 18:58:50 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12861539 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2E157C433EF for ; Wed, 25 May 2022 18:59:26 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1343910AbiEYS7W (ORCPT ); Wed, 25 May 2022 14:59:22 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60578 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1343891AbiEYS7T (ORCPT ); Wed, 25 May 2022 14:59:19 -0400 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::229]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BD91534BA7; Wed, 25 May 2022 11:59:16 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id 2AB0FFF80D; Wed, 25 May 2022 18:59:13 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1653505154; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=wcB8XbmtJH2/+Yi8wXbvB2+O44uFWVjrqjQQH76kP/4=; b=DmDlkXQjSxvvVNd8JoertHtW89K/bdAQoeDeKydt3eeRT+Q6F8oVtPtuJZGRQkxEy8n74X VPQ3YezduCPnIu6Jp/dIGu404IAt4ZPe3fUvI6vEt/ialC7oI2SFUkldkTh6QVEWWVNy8M J4htkv+Uy/R/ggC1p7j77l953mKrzyk25z8JaTtPNQngzPvoaGwwC78jxvCUKC9ZLLWu3n xHzdFDMccHu6Gocuqv6/YI79BP3cLCUoi4fpuno6jxGltFr4C76vmy1hgvFYd2p9CNIors jZAcKFgd7HY7pH6OqixghFbcoloZdm0BaIoUGhxXwSR4Ub740jNsh781WrHfSA== From: Paul Kocialkowski To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org Cc: Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Michael Turquette , Stephen Boyd , Frank Rowand , Maxime Ripard , Laurent Pinchart , Thomas Petazzoni , Paul Kocialkowski Subject: [PATCH v4 4/7] ARM: dts: sun8i: v3s: Add nodes for MIPI CSI-2 support Date: Wed, 25 May 2022 20:58:50 +0200 Message-Id: <20220525185853.695931-5-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.36.1 In-Reply-To: <20220525185853.695931-1-paul.kocialkowski@bootlin.com> References: <20220525185853.695931-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org MIPI CSI-2 is supported on the V3s with an A31-based MIPI CSI-2 bridge controller. The controller uses a separate D-PHY, which is the same that is otherwise used for MIPI DSI, but used in Rx mode. On the V3s, the CSI0 controller is dedicated to MIPI CSI-2 as it does not have access to any parallel interface pins. Add all the necessary nodes (CSI0, MIPI CSI-2 bridge and D-PHY) to support the MIPI CSI-2 interface. Note that a fwnode graph link is created between CSI0 and MIPI CSI-2 even when no sensor is connected. This will result in a probe failure for the controller as long as no sensor is connected but this is fine since no other interface is available. The interconnects property is used to inherit the proper DMA offset. Signed-off-by: Paul Kocialkowski --- arch/arm/boot/dts/sun8i-v3s.dtsi | 71 ++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index a966b6a9acf5..a9405e011f3e 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -619,6 +619,77 @@ gic: interrupt-controller@1c81000 { interrupts = ; }; + csi0: camera@1cb0000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + interconnects = <&mbus 5>; + interconnect-names = "dma-mem"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csi0_in_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_out_csi0>; + }; + }; + }; + }; + + mipi_csi2: csi@1cb1000 { + compatible = "allwinner,sun8i-v3s-mipi-csi2", + "allwinner,sun6i-a31-mipi-csi2"; + reg = <0x01cb1000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + + phys = <&dphy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_csi2_in: port@0 { + reg = <0>; + }; + + mipi_csi2_out: port@1 { + reg = <1>; + + mipi_csi2_out_csi0: endpoint { + remote-endpoint = <&csi0_in_mipi_csi2>; + }; + }; + }; + }; + + dphy: d-phy@1cb2000 { + compatible = "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01cb2000 0x1000>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_MIPI_CSI>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CSI>; + allwinner,direction = "rx"; + status = "disabled"; + #phy-cells = <0>; + }; + csi1: camera@1cb4000 { compatible = "allwinner,sun8i-v3s-csi"; reg = <0x01cb4000 0x3000>;