diff mbox series

[4/4] media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver

Message ID 20220818143307.967150-5-m.felsch@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series Add support for Toshiba TC358746 | expand

Commit Message

Marco Felsch Aug. 18, 2022, 2:33 p.m. UTC
Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
supports two operating modes:
  1st) parallel-in -> mipi-csi out
  2nd) mipi-csi in -> parallel out

This patch only adds the support for the 1st mode.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 drivers/media/i2c/Kconfig    |   17 +
 drivers/media/i2c/Makefile   |    1 +
 drivers/media/i2c/tc358746.c | 1645 ++++++++++++++++++++++++++++++++++
 3 files changed, 1663 insertions(+)
 create mode 100644 drivers/media/i2c/tc358746.c

Comments

Laurent Pinchart Sept. 5, 2022, 8:03 p.m. UTC | #1
Hi Marco,

Thank you for the patch.

On Thu, Aug 18, 2022 at 04:33:07PM +0200, Marco Felsch wrote:
> Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
> supports two operating modes:
>   1st) parallel-in -> mipi-csi out
>   2nd) mipi-csi in -> parallel out
> 
> This patch only adds the support for the 1st mode.
> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
>  drivers/media/i2c/Kconfig    |   17 +
>  drivers/media/i2c/Makefile   |    1 +
>  drivers/media/i2c/tc358746.c | 1645 ++++++++++++++++++++++++++++++++++
>  3 files changed, 1663 insertions(+)
>  create mode 100644 drivers/media/i2c/tc358746.c
> 
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 7806d4b81716..aefb9c9e0c08 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -1272,6 +1272,23 @@ config VIDEO_TC358743_CEC
>  	  When selected the tc358743 will support the optional
>  	  HDMI CEC feature.
>  
> +config VIDEO_TC358746
> +	tristate "Toshiba TC358746 parallel-CSI2 bridge"
> +	depends on VIDEO_DEV && I2C
> +	select VIDEO_V4L2_SUBDEV_API
> +	select MEDIA_CONTROLLER
> +	select V4L2_FWNODE
> +	select GENERIC_PHY_MIPI_DPHY
> +	select REGMAP_I2C
> +	select COMMON_CLK
> +	help
> +	  Support for the Toshiba TC358746 parallel to MIPI CSI-2 bridge.
> +	  The bridge can work in both directions but currently only the
> +	  parallel-in / csi-out path is supported.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called tc358746.
> +
>  config VIDEO_TVP514X
>  	tristate "Texas Instruments TVP514x video decoder"
>  	depends on VIDEO_DEV && I2C
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 0a2933103dd9..d1096c2ab480 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -118,6 +118,7 @@ obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
>  obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
>  obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
>  obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
> +obj-$(CONFIG_VIDEO_TC358746) += tc358746.o
>  obj-$(CONFIG_VIDEO_TDA1997X) += tda1997x.o
>  obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
>  obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
> diff --git a/drivers/media/i2c/tc358746.c b/drivers/media/i2c/tc358746.c
> new file mode 100644
> index 000000000000..7b71d0cf72a9
> --- /dev/null
> +++ b/drivers/media/i2c/tc358746.c
> @@ -0,0 +1,1645 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * TC358746 - Parallel <-> CSI-2 Bridge
> + *
> + * Copyright 2022 Marco Felsch <kernel@pengutronix.de>
> + *
> + * Notes:
> + *  - Currently only 'Parallel-in -> CSI-out' mode is supported!
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy-mipi-dphy.h>
> +#include <linux/property.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +
> +/* 16-bit registers */
> +#define CHIPID_REG			0x0000
> +#define		CHIPID			GENMASK(15, 8)
> +
> +#define SYSCTL_REG			0x0002
> +#define		SRESET			BIT(0)
> +
> +#define CONFCTL_REG			0x0004
> +#define		PDATAF_MASK		GENMASK(9, 8)
> +#define		PDATAF_MODE0		0
> +#define		PDATAF_MODE1		1
> +#define		PDATAF_MODE2		2
> +#define		PDATAF(val)		FIELD_PREP(PDATAF_MASK, (val))
> +#define		PPEN			BIT(6)
> +#define		DATALANE_MASK		GENMASK(1, 0)
> +
> +#define FIFOCTL_REG			0x0006
> +#define DATAFMT_REG			0x0008
> +#define		PDFMT(val)		FIELD_PREP(GENMASK(7, 4), (val))
> +
> +#define MCLKCTL_REG			0x000c
> +#define		MCLK_HIGH_MASK		GENMASK(15, 8)
> +#define		MCLK_LOW_MASK		GENMASK(7, 0)
> +#define		MCLK_HIGH(val)		FIELD_PREP(MCLK_HIGH_MASK, (val))
> +#define		MCLK_LOW(val)		FIELD_PREP(MCLK_LOW_MASK, (val))
> +
> +#define PLLCTL0_REG			0x0016
> +#define		PLL_PRD_MASK		GENMASK(15, 12)
> +#define		PLL_PRD(val)		FIELD_PREP(PLL_PRD_MASK, (val))
> +#define		PLL_FBD_MASK		GENMASK(8, 0)
> +#define		PLL_FBD(val)		FIELD_PREP(PLL_FBD_MASK, (val))
> +
> +#define PLLCTL1_REG			0x0018
> +#define		PLL_FRS_MASK		GENMASK(11, 10)
> +#define		PLL_FRS(val)		FIELD_PREP(PLL_FRS_MASK, (val))
> +#define		CKEN			BIT(4)
> +#define		RESETB			BIT(1)
> +#define		PLL_EN			BIT(0)
> +
> +#define CLKCTL_REG			0x0020
> +#define		MCLKDIV_MASK		GENMASK(3, 2)
> +#define		MCLKDIV(val)		FIELD_PREP(MCLKDIV_MASK, (val))
> +#define		MCLKDIV_8		0
> +#define		MCLKDIV_4		1
> +#define		MCLKDIV_2		2
> +
> +#define WORDCNT_REG			0x0022
> +#define PP_MISC_REG			0x0032
> +#define		FRMSTOP			BIT(15)
> +#define		RSTPTR			BIT(14)
> +
> +/* 32-bit registers */
> +#define CLW_DPHYCONTTX_REG		0x0100
> +#define CLW_CNTRL_REG			0x0140
> +#define D0W_CNTRL_REG			0x0144
> +#define		LANEDISABLE		BIT(0)
> +
> +#define STARTCNTRL_REG			0x0204
> +#define		START			BIT(0)
> +
> +#define LINEINITCNT_REG			0x0210
> +#define LPTXTIMECNT_REG			0x0214
> +#define TCLK_HEADERCNT_REG		0x0218
> +#define		TCLK_ZEROCNT(val)	FIELD_PREP(GENMASK(15, 8), (val))
> +#define		TCLK_PREPARECNT(val)	FIELD_PREP(GENMASK(6, 0), (val))
> +
> +#define TCLK_TRAILCNT_REG		0x021C
> +#define THS_HEADERCNT_REG		0x0220
> +#define		THS_ZEROCNT(val)	FIELD_PREP(GENMASK(14, 8), (val))
> +#define		THS_PREPARECNT(val)	FIELD_PREP(GENMASK(6, 0), (val))
> +
> +#define TWAKEUP_REG			0x0224
> +#define TCLK_POSTCNT_REG		0x0228
> +#define THS_TRAILCNT_REG		0x022C
> +#define HSTXVREGEN_REG			0x0234
> +#define TXOPTIONCNTRL_REG		0x0238
> +#define CSI_CONTROL_REG			0x040C
> +#define		CSI_MODE		BIT(15)
> +#define		TXHSMD			BIT(7)
> +#define		NOL(val)		FIELD_PREP(GENMASK(2, 1), (val))
> +
> +#define CSI_CONFW_REG			0x0500
> +#define		MODE(val)		FIELD_PREP(GENMASK(31, 29), (val))
> +#define		MODE_SET		0x5
> +#define		ADDRESS(val)		FIELD_PREP(GENMASK(28, 24), (val))
> +#define		CSI_CONTROL_ADDRESS	0x3
> +#define		DATA(val)		FIELD_PREP(GENMASK(15, 0), (val))
> +
> +#define CSI_START_REG			0x0518
> +#define		STRT			BIT(0)
> +
> +static const struct v4l2_mbus_framefmt tc358746_def_fmt = {
> +	.width		= 640,
> +	.height		= 480,
> +	.code		= MEDIA_BUS_FMT_UYVY8_2X8,
> +	.field		= V4L2_FIELD_NONE,
> +	.colorspace	= V4L2_COLORSPACE_DEFAULT,
> +	.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
> +	.quantization	= V4L2_QUANTIZATION_DEFAULT,
> +	.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
> +};
> +
> +static const char * const tc358746_supplies[] = {
> +	"vddc", "vddio", "vddmipi"
> +};
> +
> +enum {
> +	TC358746_SINK,
> +	TC358746_SOURCE,
> +	TC358746_NR_PADS
> +};
> +
> +struct tc358746 {
> +	struct v4l2_subdev		sd;
> +	struct media_pad		pads[TC358746_NR_PADS];
> +	struct v4l2_async_notifier	notifier;
> +	struct v4l2_mbus_framefmt	mbusfmt;

Could you use the active state API instead of manually storing mbusfmt
here ? It involves

- Implementing the .init_cfg() operation
- Calling v4l2_subdev_init_finalize() in probe
- Replacing calls to __tc358746_get_pad_format() with
  v4l2_subdev_get_pad_format()
- Propagating the format from sink to source in tc358746_set_fmt()
- Dropping tc358746_src_mbus_code() from tc358746_get_fmt() and simply
  retrieving the format using v4l2_subdev_get_pad_format() there
- Dropping this field

The formats for both the ACTIVE and TRY states will then be stored in
the subdev state, unconditionally. You can retrieve the active state
with v4l2_subdev_get_locked_active_state() in tc358746_s_stream().

> +	struct v4l2_fwnode_endpoint	csi_vep;
> +
> +	struct v4l2_ctrl_handler	ctrl_hdl;
> +
> +	struct regmap			*regmap;
> +	struct clk			*refclk;
> +	struct gpio_desc		*reset_gpio;
> +	struct regulator_bulk_data	supplies[ARRAY_SIZE(tc358746_supplies)];
> +
> +	struct clk_hw			mclk_hw;
> +	unsigned long			mclk_rate;
> +	u8				mclk_prediv;
> +	u16				mclk_postdiv;
> +
> +	unsigned long			pll_rate;
> +	u8				pll_post_div;
> +	u16				pll_pre_div;
> +	u16				pll_mul;
> +
> +	struct v4l2_ctrl		*sensor_pclk_ctrl;
> +
> +#define TC358746_VB_MAX_SIZE		(511 * 32)
> +#define TC358746_VB_DEFAULT_SIZE	  (1 * 32)
> +	unsigned int			vb_size; /* Video buffer size in bits */
> +
> +	struct phy_configure_opts_mipi_dphy dphy_cfg;
> +};
> +
> +static inline struct tc358746 *to_tc358746(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct tc358746, sd);
> +}
> +
> +static inline struct tc358746 *clk_hw_to_tc358746(struct clk_hw *hw)
> +{
> +	return container_of(hw, struct tc358746, mclk_hw);
> +}
> +
> +struct tc358746_format {
> +	u32		code;
> +	bool		csi_format;
> +	unsigned char	bus_width;
> +	unsigned char	bpp;
> +	/* Register values */
> +	u8		pdformat; /* Peripheral Data Format */
> +	u8		pdataf;   /* Parallel Data Format Option */
> +};
> +
> +enum {
> +	PDFORMAT_RAW8 = 0,
> +	PDFORMAT_RAW10,
> +	PDFORMAT_RAW12,
> +	PDFORMAT_RGB888,
> +	PDFORMAT_RGB666,
> +	PDFORMAT_RGB565,
> +	PDFORMAT_YUV422_8BIT,
> +	/* RESERVED = 7 */
> +	PDFORMAT_RAW14 = 8,
> +	PDFORMAT_YUV422_10BIT,
> +	PDFORMAT_YUV444,
> +};
> +
> +/* Check tc358746_src_mbus_code() if you add new formats */
> +static const struct tc358746_format tc358746_formats[] = {
> +	{
> +		.code = MEDIA_BUS_FMT_UYVY8_2X8,
> +		.bus_width = 8,
> +		.bpp = 16,
> +		.pdformat = PDFORMAT_YUV422_8BIT,
> +		.pdataf = PDATAF_MODE0,
> +	}, {
> +		.code = MEDIA_BUS_FMT_UYVY8_1X16,
> +		.csi_format = true,
> +		.bus_width = 16,
> +		.bpp = 16,
> +		.pdformat = PDFORMAT_YUV422_8BIT,
> +		.pdataf = PDATAF_MODE1,
> +	}, {
> +		.code = MEDIA_BUS_FMT_YUYV8_1X16,
> +		.csi_format = true,
> +		.bus_width = 16,
> +		.bpp = 16,
> +		.pdformat = PDFORMAT_YUV422_8BIT,
> +		.pdataf = PDATAF_MODE2,
> +	}, {
> +		.code = MEDIA_BUS_FMT_UYVY10_2X10,
> +		.bus_width = 10,
> +		.bpp = 20,
> +		.pdformat = PDFORMAT_YUV422_10BIT,
> +		.pdataf = PDATAF_MODE0, /* don't care */
> +	}, {
> +		/* in datasheet listed as YUV444 */
> +		.code = MEDIA_BUS_FMT_GBR888_1X24,
> +		.csi_format = true,
> +		.bus_width = 24,
> +		.bpp = 24,
> +		.pdformat = PDFORMAT_YUV444,

This looks quite weird, does 24-bit RGB really map to the CSI-2 YUV444
data type ?

> +		.pdataf = PDATAF_MODE0, /* don't care */
> +	},
> +};
> +
> +/* Get n-th format for pad */
> +static const struct tc358746_format *
> +tc358746_get_format_by_idx(unsigned int pad, unsigned int index)
> +{
> +	unsigned int idx = 0;
> +	unsigned int i;
> +
> +	if (pad >= TC358746_NR_PADS)
> +		return ERR_PTR(-EINVAL);

That should be tested by the subdev core, I think you can drop the
check. Same below.

> +
> +	for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) {
> +		const struct tc358746_format *fmt = &tc358746_formats[i];
> +
> +		if ((pad == TC358746_SOURCE && fmt->csi_format) ||
> +		    (pad == TC358746_SINK)) {
> +			if (idx == index)
> +				return fmt;
> +			idx++;
> +		}
> +	}
> +
> +	return ERR_PTR(-EINVAL);
> +}
> +
> +static const struct tc358746_format *
> +tc358746_get_format_by_code(unsigned int pad, u32 code)
> +{
> +	unsigned int i;
> +
> +	if (pad >= TC358746_NR_PADS)
> +		return ERR_PTR(-EINVAL);
> +
> +	for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) {
> +		const struct tc358746_format *fmt = &tc358746_formats[i];
> +
> +		if (pad == TC358746_SINK && fmt->code == code)
> +			return fmt;
> +
> +		if (pad == TC358746_SOURCE && fmt->csi_format &&
> +		    fmt->code == code)
> +			return fmt;

You could also write

		if (pad == TC358746_SOURCE && !fmt->csi_format)
			continue;

		if (fmt->code == code)
			return fmt;

Up to you.

> +	}
> +
> +	return ERR_PTR(-EINVAL);
> +}
> +
> +static u32 tc358746_src_mbus_code(u32 code)
> +{
> +	switch (code) {
> +	case MEDIA_BUS_FMT_UYVY8_2X8:
> +		return MEDIA_BUS_FMT_UYVY8_1X16;
> +	case MEDIA_BUS_FMT_UYVY10_2X10:
> +		return MEDIA_BUS_FMT_UYVY10_1X20;
> +	default:
> +		return code;
> +	}
> +}
> +
> +static bool tc358746_writeable_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case SYSCTL_REG ... CSI_START_REG:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static bool tc358746_readable_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case CHIPID_REG ... CSI_START_REG:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static const struct regmap_config tc358746_regmap_config = {
> +	.name = "tc358746",
> +	.reg_bits = 16,
> +	.val_bits = 16,
> +	.max_register = CSI_START_REG,
> +	.writeable_reg = tc358746_writeable_reg,
> +	.readable_reg = tc358746_readable_reg,
> +	.reg_format_endian = REGMAP_ENDIAN_BIG,
> +	.val_format_endian = REGMAP_ENDIAN_BIG,
> +};
> +
> +static int tc358746_write(struct tc358746 *tc358746, u32 reg, u32 val)
> +{
> +	size_t count;
> +
> +	/* 32-bit registers starting from CLW_DPHYCONTTX */
> +	count = reg < CLW_DPHYCONTTX_REG ? 1 : 2;
> +
> +	return regmap_bulk_write(tc358746->regmap, reg, &val, count);
> +}
> +
> +static int tc358746_read(struct tc358746 *tc358746, u32 reg, u32 *val)
> +{
> +	size_t count;
> +
> +	/* 32-bit registers starting from CLW_DPHYCONTTX */
> +	count = reg < CLW_DPHYCONTTX_REG ? 1 : 2;
> +	*val = 0;
> +
> +	return regmap_bulk_read(tc358746->regmap, reg, val, count);
> +}
> +
> +static int
> +tc358746_update_bits(struct tc358746 *tc358746, u32 reg, u32 mask, u32 val)
> +{
> +	u32 tmp, orig;
> +	int err;
> +
> +	err = tc358746_read(tc358746, reg, &orig);
> +	if (err)
> +		return err;
> +
> +	tmp = orig & ~mask;
> +	tmp |= val & mask;
> +
> +	return tc358746_write(tc358746, reg, tmp);
> +}
> +
> +static int tc358746_set_bits(struct tc358746 *tc358746, u32 reg, u32 bits)
> +{
> +	return tc358746_update_bits(tc358746, reg, bits, bits);
> +}
> +
> +static int tc358746_clear_bits(struct tc358746 *tc358746, u32 reg, u32 bits)
> +{
> +	return tc358746_update_bits(tc358746, reg, bits, 0);
> +}
> +
> +static int tc358746_sw_reset(struct tc358746 *tc358746)
> +{
> +	int err;
> +
> +	err = tc358746_set_bits(tc358746, SYSCTL_REG, SRESET);
> +	if (err)
> +		return err;
> +
> +	udelay(10);
> +
> +	return tc358746_clear_bits(tc358746, SYSCTL_REG, SRESET);
> +}
> +
> +static int
> +tc358746_apply_pll_config(struct tc358746 *tc358746)
> +{
> +	u8 post = tc358746->pll_post_div;
> +	u16 pre = tc358746->pll_pre_div;
> +	u16 mul = tc358746->pll_mul;
> +	u32 val, mask;
> +	int err;
> +
> +	err = tc358746_read(tc358746, PLLCTL1_REG, &val);
> +	if (err)
> +		return err;
> +
> +	/* Don't touch the PLL if running */
> +	if (FIELD_GET(PLL_EN, val) == 1)
> +		return 0;
> +
> +	/* Pre-div and Multiplicator have a internal +1 logic */
> +	val = PLL_PRD(pre - 1) | PLL_FBD(mul - 1);
> +	mask = PLL_PRD_MASK | PLL_FBD_MASK;
> +	err = tc358746_update_bits(tc358746, PLLCTL0_REG, mask, val);
> +	if (err)
> +		return err;
> +
> +	val = PLL_FRS(ilog2(post)) | RESETB | PLL_EN;
> +	mask = PLL_FRS_MASK | RESETB | PLL_EN;
> +	tc358746_update_bits(tc358746, PLLCTL1_REG, mask, val);
> +	if (err)
> +		return err;
> +
> +	udelay(1000);
> +
> +	return tc358746_set_bits(tc358746, PLLCTL1_REG, CKEN);
> +}
> +
> +static int tc358746_apply_misc_config(struct tc358746 *tc358746)
> +{
> +	struct device *dev = tc358746->sd.dev;
> +	const struct tc358746_format *fmt;
> +	u32 val;
> +	int err;
> +
> +	fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
> +	if (IS_ERR(fmt))
> +		return PTR_ERR(fmt);

mbusfmt.code is supposed to have been validated, so you can drop the
error check here.

> +
> +	/* Self defined CSI user data type id's are not supported yet */
> +	val = PDFMT(fmt->pdformat);
> +	dev_dbg(dev, "DATAFMT: 0x%x\n", val);
> +	err = tc358746_write(tc358746, DATAFMT_REG, val);
> +	if (err)
> +		return err;
> +
> +	val = PDATAF(fmt->pdataf);
> +	dev_dbg(dev, "CONFCTL[PDATAF]: 0x%x\n", fmt->pdataf);
> +	err = tc358746_update_bits(tc358746, CONFCTL_REG, PDATAF_MASK, val);
> +	if (err)
> +		return err;
> +
> +	val = tc358746->vb_size / 32;
> +	dev_dbg(dev, "FIFOCTL: %u (0x%x)\n", val, val);
> +	err = tc358746_write(tc358746, FIFOCTL_REG, val);
> +	if (err)
> +		return err;
> +
> +	/* Total number of bytes for each line/width */
> +	val = tc358746->mbusfmt.width * fmt->bpp / 8;
> +	dev_dbg(dev, "WORDCNT: %u (0x%x)\n", val, val);
> +	return tc358746_write(tc358746, WORDCNT_REG, val);
> +}
> +
> +#ifndef MHZ

Where would it be previously defined ? This sounds like asking for
trouble later.

> +#define MHZ		(1000 * 1000)
> +#endif
> +
> +/* Use MHz as base so the div needs no u64 */
> +static u32 tc358746_cfg_to_cnt(unsigned int cfg_val,
> +			       unsigned int clk_mhz,
> +			       unsigned int time_base)
> +{
> +	return DIV_ROUND_UP(cfg_val * clk_mhz, time_base);
> +}
> +
> +static u32 tc358746_ps_to_cnt(unsigned int cfg_val,
> +			      unsigned int clk_mhz)
> +{
> +	return tc358746_cfg_to_cnt(cfg_val, clk_mhz, USEC_PER_SEC);
> +}
> +
> +static u32 tc358746_us_to_cnt(unsigned int cfg_val,
> +			      unsigned int clk_mhz)
> +{
> +	return tc358746_cfg_to_cnt(cfg_val, clk_mhz, 1);
> +}
> +
> +static int tc358746_apply_dphy_config(struct tc358746 *tc358746)
> +{
> +	struct phy_configure_opts_mipi_dphy *cfg = &tc358746->dphy_cfg;
> +	bool non_cont_clk = !!(tc358746->csi_vep.bus.mipi_csi2.flags &
> +			       V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK);
> +	struct device *dev = tc358746->sd.dev;
> +	unsigned long hs_byte_clk, hf_clk;
> +	u32 val, val2, lptxcnt;
> +	int err;
> +
> +	/* The hs_byte_clk is also called SYSCLK in the excel sheet */
> +	hs_byte_clk = cfg->hs_clk_rate / 8;
> +	hs_byte_clk /= MHZ;
> +	hf_clk = hs_byte_clk / 2;
> +
> +	val = tc358746_us_to_cnt(cfg->init, hf_clk) - 1;
> +	dev_dbg(dev, "LINEINITCNT: %u (0x%x)\n", val, val);
> +	err = tc358746_write(tc358746, LINEINITCNT_REG, val);
> +	if (err)
> +		return err;
> +
> +	val = tc358746_ps_to_cnt(cfg->lpx, hs_byte_clk) - 1;
> +	lptxcnt = val;
> +	dev_dbg(dev, "LPTXTIMECNT: %u (0x%x)\n", val, val);
> +	err = tc358746_write(tc358746, LPTXTIMECNT_REG, val);
> +	if (err)
> +		return err;
> +
> +	val = tc358746_ps_to_cnt(cfg->clk_prepare, hs_byte_clk) - 1;
> +	val2 = tc358746_ps_to_cnt(cfg->clk_zero, hs_byte_clk) - 1;
> +	dev_dbg(dev, "TCLK_PREPARECNT: %u (0x%x)\n", val, val);
> +	dev_dbg(dev, "TCLK_ZEROCNT: %u (0x%x)\n", val2, val2);
> +	dev_dbg(dev, "TCLK_HEADERCNT: 0x%x\n",
> +		(u32)(TCLK_PREPARECNT(val) | TCLK_ZEROCNT(val2)));
> +	err = tc358746_write(tc358746, TCLK_HEADERCNT_REG,
> +			     TCLK_PREPARECNT(val) | TCLK_ZEROCNT(val2));
> +	if (err)
> +		return err;
> +
> +	val = tc358746_ps_to_cnt(cfg->clk_trail, hs_byte_clk);
> +	dev_dbg(dev, "TCLK_TRAILCNT: %u (0x%x)\n", val, val);
> +	err = tc358746_write(tc358746, TCLK_TRAILCNT_REG, val);
> +	if (err)
> +		return err;
> +
> +	val = tc358746_ps_to_cnt(cfg->hs_prepare, hs_byte_clk) - 1;
> +	val2 = tc358746_ps_to_cnt(cfg->hs_zero, hs_byte_clk) - 1;
> +	dev_dbg(dev, "THS_PREPARECNT: %u (0x%x)\n", val, val);
> +	dev_dbg(dev, "THS_ZEROCNT: %u (0x%x)\n", val2, val2);
> +	dev_dbg(dev, "THS_HEADERCNT: 0x%x\n",
> +		(u32)(THS_PREPARECNT(val) | THS_ZEROCNT(val2)));
> +	err = tc358746_write(tc358746, THS_HEADERCNT_REG,
> +			     THS_PREPARECNT(val) | THS_ZEROCNT(val2));
> +	if (err)
> +		return err;
> +
> +	/* TWAKEUP > 1ms in lptxcnt steps */
> +	val = tc358746_us_to_cnt(cfg->wakeup, hs_byte_clk);
> +	val = val / (lptxcnt + 1) - 1;
> +	dev_dbg(dev, "TWAKEUP: %u (0x%x)\n", val, val);
> +	err = tc358746_write(tc358746, TWAKEUP_REG, val);
> +	if (err)
> +		return err;
> +
> +	val = tc358746_ps_to_cnt(cfg->clk_post, hs_byte_clk);
> +	dev_dbg(dev, "TCLK_POSTCNT: %u (0x%x)\n", val, val);
> +	err = tc358746_write(tc358746, TCLK_POSTCNT_REG, val);
> +	if (err)
> +		return err;
> +
> +	val = tc358746_ps_to_cnt(cfg->hs_trail, hs_byte_clk);
> +	dev_dbg(dev, "THS_TRAILCNT: %u (0x%x)\n", val, val);
> +	err = tc358746_write(tc358746, THS_TRAILCNT_REG, val);
> +	if (err)
> +		return err;
> +
> +	dev_dbg(dev, "CONTCLKMODE: %u", non_cont_clk ? 0 : 1);
> +	return  tc358746_write(tc358746, TXOPTIONCNTRL_REG, non_cont_clk ? 0 : 1);
> +}
> +
> +#define MAX_DATA_LANES 4
> +
> +static int tc358746_enable_csi_lanes(struct tc358746 *tc358746, int enable)
> +{
> +	unsigned int lanes = tc358746->dphy_cfg.lanes;
> +	unsigned int lane;
> +	u32 reg, val;
> +	int err;
> +
> +	err = tc358746_update_bits(tc358746, CONFCTL_REG, DATALANE_MASK,
> +				   lanes - 1);
> +	if (err)
> +		return err;
> +
> +	/* Clock lane */
> +	val = enable ? 0 : LANEDISABLE;
> +	dev_dbg(tc358746->sd.dev, "CLW_CNTRL: 0x%x\n", val);
> +	err = tc358746_write(tc358746, CLW_CNTRL_REG, val);
> +	if (err)
> +		return err;
> +
> +	for (lane = 0; lane < MAX_DATA_LANES; lane++) {
> +		/* Data lanes */
> +		reg = D0W_CNTRL_REG + lane * 0x4;
> +		val = (enable && lane < lanes) ? 0 : LANEDISABLE;
> +
> +		dev_dbg(tc358746->sd.dev, "D%uW_CNTRL: 0x%x\n", lane, val);
> +		err = tc358746_write(tc358746, reg, val);
> +		if (err)
> +			return err;
> +	}
> +
> +	val = 0;
> +	if (enable) {
> +		/* Clock lane */
> +		val |= BIT(0);
> +
> +		/* Data lanes */
> +		for (lane = 1; lane <= lanes; lane++)
> +			val |= BIT(lane);
> +	}
> +
> +	dev_dbg(tc358746->sd.dev, "HSTXVREGEN: 0x%x\n", val);
> +	return tc358746_write(tc358746, HSTXVREGEN_REG, val);
> +}
> +
> +static int tc358746_enable_csi_module(struct tc358746 *tc358746, int enable)
> +{
> +	unsigned int lanes = tc358746->dphy_cfg.lanes;
> +	int err;
> +
> +	/*
> +	 * START and STRT are only reseted/disabled by sw reset. This is
> +	 * required to put the lane state back into LP-11 state. The sw reset
> +	 * don't reset register values.
> +	 */
> +	if (!enable)
> +		return tc358746_sw_reset(tc358746);
> +
> +	err = tc358746_write(tc358746, STARTCNTRL_REG, START);
> +	if (err)
> +		return err;
> +
> +	err = tc358746_write(tc358746, CSI_START_REG, STRT);
> +	if (err)
> +		return err;
> +
> +	/* CSI_CONTROL_REG is only indirect accessible */
> +	return tc358746_write(tc358746, CSI_CONFW_REG,
> +			      MODE(MODE_SET) |
> +			      ADDRESS(CSI_CONTROL_ADDRESS) |
> +			      DATA(CSI_MODE | TXHSMD | NOL(lanes - 1)));
> +}
> +
> +static int tc358746_enable_parallel_port(struct tc358746 *tc358746, int enable)
> +{
> +	int err;
> +
> +	if (enable) {
> +		err = tc358746_write(tc358746, PP_MISC_REG, 0);
> +		if (err)
> +			return err;
> +
> +		return tc358746_set_bits(tc358746, CONFCTL_REG, PPEN);
> +	}
> +
> +	err = tc358746_set_bits(tc358746, PP_MISC_REG, FRMSTOP);
> +	if (err)
> +		return err;
> +
> +	err = tc358746_clear_bits(tc358746, CONFCTL_REG, PPEN);
> +	if (err)
> +		return err;
> +
> +	return tc358746_set_bits(tc358746, PP_MISC_REG, RSTPTR);
> +}
> +
> +static inline struct v4l2_subdev *tc358746_get_remote_sd(struct media_pad *pad)
> +{
> +	pad = media_pad_remote_pad_first(pad);
> +	if (!pad)
> +		return NULL;
> +
> +	return media_entity_to_v4l2_subdev(pad->entity);
> +}
> +
> +static int tc358746_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct tc358746 *tc358746 = to_tc358746(sd);
> +	struct v4l2_subdev *src;
> +	int err;
> +
> +	dev_dbg(sd->dev, "%sable\n", enable ? "en" : "dis");
> +
> +	src = tc358746_get_remote_sd(&tc358746->pads[TC358746_SINK]);
> +	if (!src)
> +		return -EPIPE;
> +
> +	if (enable) {
> +		err = pm_runtime_resume_and_get(sd->dev);
> +		if (err)
> +			return err;
> +
> +		err = tc358746_enable_csi_lanes(tc358746, 1);
> +		if (err) {
> +			pm_runtime_mark_last_busy(sd->dev);
> +			pm_runtime_put_sync_autosuspend(sd->dev);
> +			return err;

Looks like a candidate for a goto statement.

> +		}
> +
> +		err = tc358746_enable_csi_module(tc358746, 1);
> +		if (err) {
> +			pm_runtime_mark_last_busy(sd->dev);
> +			pm_runtime_put_sync_autosuspend(sd->dev);
> +			return err;
> +		}
> +
> +		err = tc358746_enable_parallel_port(tc358746, 1);
> +		if (err) {
> +			pm_runtime_mark_last_busy(sd->dev);
> +			pm_runtime_put_sync_autosuspend(sd->dev);
> +			return err;
> +		}
> +
> +		err = v4l2_subdev_call(src, video, s_stream, 1);
> +		if (err) {
> +			pm_runtime_mark_last_busy(sd->dev);
> +			pm_runtime_put_sync_autosuspend(sd->dev);
> +		}
> +
> +		return err;
> +	}
> +
> +	/*
> +	 * Lane disable trigger state change from LP-11 to LP-00
> +	 * therefore it must happen before the CSI modile is disabled.
> +	 */
> +	err = tc358746_enable_csi_lanes(tc358746, 0);
> +	if (err)
> +		return err;
> +
> +	err = tc358746_enable_csi_module(tc358746, 0);
> +	if (err)
> +		return err;
> +
> +	err = tc358746_enable_parallel_port(tc358746, 0);
> +	if (err)
> +		return err;
> +
> +	pm_runtime_mark_last_busy(sd->dev);
> +	pm_runtime_put_sync_autosuspend(sd->dev);
> +
> +	return v4l2_subdev_call(src, video, s_stream, 0);
> +}
> +
> +static int tc358746_enum_mbus_code(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_state *sd_state,
> +				   struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	const struct tc358746_format *fmt;
> +
> +	fmt = tc358746_get_format_by_idx(code->pad, code->index);
> +	if (IS_ERR(fmt))
> +		return PTR_ERR(fmt);
> +
> +	code->code = fmt->code;
> +
> +	return 0;
> +}
> +
> +static struct v4l2_mbus_framefmt *
> +__tc358746_get_pad_format(struct v4l2_subdev *sd,
> +			  struct v4l2_subdev_state *sd_state,
> +			  unsigned int pad, u32 which)
> +{
> +	struct tc358746 *tc358746 = to_tc358746(sd);
> +
> +	switch (which) {
> +	case V4L2_SUBDEV_FORMAT_TRY:
> +		return v4l2_subdev_get_try_format(sd, sd_state, pad);
> +	case V4L2_SUBDEV_FORMAT_ACTIVE:
> +		return &tc358746->mbusfmt;
> +	default:
> +		return NULL;
> +	}
> +}
> +
> +static int tc358746_get_fmt(struct v4l2_subdev *sd,
> +			    struct v4l2_subdev_state *sd_state,
> +			    struct v4l2_subdev_format *format)
> +{
> +	struct tc358746 *tc358746 = to_tc358746(sd);
> +
> +	if (format->pad >= TC358746_NR_PADS)
> +		return -EINVAL;
> +
> +	format->format = tc358746->mbusfmt;
> +	if (format->pad == TC358746_SOURCE)
> +		format->format.code = tc358746_src_mbus_code(tc358746->mbusfmt.code);
> +
> +	return 0;
> +}
> +
> +static int tc358746_set_fmt(struct v4l2_subdev *sd,
> +			    struct v4l2_subdev_state *sd_state,
> +			    struct v4l2_subdev_format *format)
> +{
> +	struct v4l2_mbus_framefmt *mbusformat;
> +	const struct tc358746_format *fmt;
> +
> +	if (format->pad >= TC358746_NR_PADS)
> +		return -EINVAL;
> +
> +	/* The src follows the properties from the sink */
> +	if (format->pad == TC358746_SOURCE)
> +		return tc358746_get_fmt(sd, sd_state, format);
> +
> +	mbusformat = __tc358746_get_pad_format(sd, sd_state, format->pad,
> +					       format->which);
> +	if (!mbusformat)
> +		return -EINVAL;
> +
> +	fmt = tc358746_get_format_by_code(format->pad, format->format.code);
> +	if (IS_ERR(fmt))
> +		fmt = tc358746_get_format_by_code(format->pad, tc358746_def_fmt.code);
> +
> +	format->format.code = fmt->code;
> +	format->format.field = V4L2_FIELD_NONE;
> +
> +	dev_dbg(sd->dev, "Update format: %ux%u code:0x%x -> %ux%u code:0x%x",
> +		mbusformat->width, mbusformat->height, mbusformat->code,
> +		format->format.width, format->format.height, format->format.code);
> +
> +	*mbusformat = format->format;
> +
> +	return 0;
> +}
> +
> +static unsigned long tc358746_find_pll_settings(struct tc358746 *tc358746,
> +						unsigned long refclk,
> +						unsigned long fout)
> +
> +{
> +	struct device *dev = tc358746->sd.dev;
> +	unsigned long best_freq = 0;
> +	u32 min_delta = 0xffffffff;
> +	u16 prediv_max = 17;
> +	u16 prediv_min = 1;
> +	u16 m_best, mul;
> +	u16 p_best, p;
> +	u8 postdiv;
> +
> +	if (fout > 1000 * MHZ) {
> +		dev_err(dev, "HS-Clock above 1 Ghz are not supported\n");
> +		return 0;
> +	} else if (fout >= 500 * MHZ)
> +		postdiv = 1;
> +	else if (fout >= 250 * MHZ)
> +		postdiv = 2;
> +	else if (fout >= 125 * MHZ)
> +		postdiv = 4;
> +	else
> +		postdiv = 8;
> +
> +	for (p = prediv_min; p <= prediv_max; p++) {
> +		unsigned long delta, fin;
> +		u64 tmp;
> +
> +		fin = DIV_ROUND_CLOSEST(refclk, p);
> +		if (fin < 4 * MHZ || fin > 40 * MHZ)
> +			continue;
> +
> +		tmp = fout * p * postdiv;
> +		do_div(tmp, fin);
> +		mul = tmp;
> +		if (mul > 511)
> +			continue;
> +
> +		tmp = mul * fin;
> +		do_div(tmp, p * postdiv);
> +
> +		delta = abs(fout - tmp);
> +		if (delta < min_delta) {
> +			p_best = p;
> +			m_best = mul;
> +			min_delta = delta;
> +			best_freq = tmp;
> +		};
> +
> +		if (delta == 0)
> +			break;
> +	};
> +
> +	if (!best_freq) {
> +		dev_err(dev, "Failed find PLL frequency\n");
> +		return 0;
> +	}
> +
> +	tc358746->pll_post_div = postdiv;
> +	tc358746->pll_pre_div = p_best;
> +	tc358746->pll_mul = m_best;
> +
> +	if (best_freq != fout)
> +		dev_warn(dev, "Request PLL freq:%lu, found PLL freq:%lu\n",
> +			 fout, best_freq);
> +
> +	dev_dbg(dev, "Found PLL settings: freq:%lu prediv:%u multi:%u postdiv:%u\n",
> +		best_freq, p_best, m_best, postdiv);
> +
> +	return best_freq;
> +}
> +
> +#define TC358746_PRECISION 10
> +
> +static int
> +tc358746_link_validate(struct v4l2_subdev *sd, struct media_link *link,
> +		       struct v4l2_subdev_format *source_fmt,
> +		       struct v4l2_subdev_format *sink_fmt)
> +{
> +	struct tc358746 *tc358746 = to_tc358746(sd);
> +	unsigned long csi_bitrate, sensor_bitrate;
> +	const struct tc358746_format *fmt;
> +	unsigned int fifo_sz, tmp, n;
> +	s64 sensor_pclk_rate;
> +
> +	/* Check the FIFO settings */
> +	fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
> +	if (IS_ERR(fmt))
> +		return PTR_ERR(fmt);
> +
> +	sensor_pclk_rate = v4l2_ctrl_g_ctrl_int64(tc358746->sensor_pclk_ctrl);
> +	sensor_bitrate = sensor_pclk_rate * fmt->bus_width;
> +
> +	csi_bitrate = tc358746->dphy_cfg.lanes * tc358746->pll_rate;
> +
> +	dev_dbg(tc358746->sd.dev,
> +		"Fifo settings params: sensor-bitrate:%lu csi-bitrate:%lu",
> +		sensor_bitrate, csi_bitrate);
> +
> +	/* Avoid possible FIFO overflows */
> +	if (csi_bitrate < sensor_bitrate) {
> +		dev_err(sd->dev,
> +			"Link validation failed csi-bitrate:%lu < sensor-bitrate:%lu\n",
> +			csi_bitrate, sensor_bitrate);
> +		return -EINVAL;
> +	}
> +
> +	/* Best case */
> +	if (csi_bitrate == sensor_bitrate) {
> +		tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> +		goto out;
> +	}
> +
> +	/*
> +	 * Avoid possible FIFO underflow in case of
> +	 * csi_bitrate > sensor_bitrate. For such case the chip has a internal
> +	 * fifo which can be used to delay the line output.
> +	 *
> +	 * Fifo size calculation:
> +	 *
> +	 * fifo-sz, image-width - in bits
> +	 * sbr                  - sensor_bitrate in bits/s
> +	 * csir                 - csi_bitrate in bits/s
> +	 *
> +	 *                1             1      1
> +	 * image-width * --- + fifo-sz --- >= ---- * image-width
> +	 *               sbr           sbr    csir
> +	 *
> +	 * fifo-sz >= abs(sbr/csir * image-width - image-width)
> +	 *                `-----´
> +	 *                   n
> +	 *
> +	 */
> +
> +	sensor_bitrate /= TC358746_PRECISION;
> +	n = csi_bitrate / sensor_bitrate;
> +	tmp = (tc358746->mbusfmt.width * TC358746_PRECISION) / n;
> +	fifo_sz = tc358746->mbusfmt.width - tmp;
> +	fifo_sz *= fmt->bpp;
> +	tc358746->vb_size = round_up(fifo_sz, 32);
> +

Please also call v4l2_subdev_link_validate_default() here.

I wonder if the above calculation wouldn't be better performed in
.s_stream() (or rather in a function being called by .s_stream()) when
enabling streaming.

> +out:
> +	dev_dbg(tc358746->sd.dev,
> +		"Found FIFO size[bits]:%u -> aligned to size[bits]:%u\n",
> +		fifo_sz, tc358746->vb_size);
> +
> +	return tc358746->vb_size > TC358746_VB_MAX_SIZE ? -EINVAL : 0;
> +}
> +
> +static int tc358746_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
> +				    struct v4l2_mbus_config *config)
> +{
> +	struct tc358746 *tc358746 = to_tc358746(sd);
> +
> +	if (pad != TC358746_SOURCE)
> +		return -EINVAL;
> +
> +	config->type = V4L2_MBUS_CSI2_DPHY;
> +	config->bus.mipi_csi2 = tc358746->csi_vep.bus.mipi_csi2;
> +
> +	return 0;
> +}
> +
> +static int tc358746_link_setup(struct media_entity *entity,
> +			       const struct media_pad *local,
> +			       const struct media_pad *remote, u32 flags)
> +{
> +	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> +	struct v4l2_subdev *sensor_sd =
> +		media_entity_to_v4l2_subdev(remote->entity);
> +	struct tc358746 *tc358746 = to_tc358746(sd);
> +	struct device *dev = sd->dev;
> +	struct v4l2_ctrl *ctrl;
> +
> +	/* no special requirements on source pads */
> +	if (local->flags & MEDIA_PAD_FL_SOURCE)
> +		return 0;
> +
> +	dev_dbg(dev, "link setup '%s':%d->'%s':%d[%d]",
> +		remote->entity->name, remote->index, local->entity->name,
> +		local->index, flags & MEDIA_LNK_FL_ENABLED);
> +
> +	/* Required for the fifo calculation */
> +	ctrl = v4l2_ctrl_find(sensor_sd->ctrl_handler, V4L2_CID_PIXEL_RATE);
> +	if (!ctrl) {
> +		dev_err(dev, "Subdev [%s] must support V4L2_CID_PIXEL_RATE\n",
> +			sensor_sd->name);
> +		return -EINVAL;
> +	}
> +	tc358746->sensor_pclk_ctrl = ctrl;
> +
> +	return 0;
> +}
> +
> +int __maybe_unused
> +tc358746_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
> +{
> +	struct tc358746 *tc358746 = to_tc358746(sd);
> +
> +	/* 32-bit registers starting from CLW_DPHYCONTTX */
> +	reg->size = reg->reg < CLW_DPHYCONTTX_REG ? 2 : 4;
> +
> +	if (pm_runtime_resume_and_get(sd->dev)) {
> +		dev_err(sd->dev, "Failed to resume the device\n");
> +		return 0;
> +	}
> +
> +	tc358746_read(tc358746, reg->reg, (u32 *)&reg->val);
> +
> +	pm_runtime_mark_last_busy(sd->dev);
> +	pm_runtime_put_sync_autosuspend(sd->dev);
> +
> +	return 0;
> +}
> +
> +int __maybe_unused
> +tc358746_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
> +{
> +	struct tc358746 *tc358746 = to_tc358746(sd);
> +
> +	if (pm_runtime_resume_and_get(sd->dev)) {
> +		dev_err(sd->dev, "Failed to resume the device\n");
> +		return 0;
> +	}
> +
> +	tc358746_write(tc358746, (u32)reg->reg, (u32)reg->val);
> +
> +	pm_runtime_mark_last_busy(sd->dev);
> +	pm_runtime_put_sync_autosuspend(sd->dev);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_core_ops tc358746_core_ops = {
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +	.g_register = tc358746_g_register,
> +	.s_register = tc358746_s_register,
> +#endif

Have you found this to be useful ?

> +};
> +
> +static const struct v4l2_subdev_video_ops tc358746_video_ops = {
> +	.s_stream = tc358746_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops tc358746_pad_ops = {
> +	.enum_mbus_code = tc358746_enum_mbus_code,
> +	.set_fmt = tc358746_set_fmt,
> +	.get_fmt = tc358746_get_fmt,
> +	.link_validate = tc358746_link_validate,
> +	.get_mbus_config = tc358746_get_mbus_config,
> +};
> +
> +static const struct v4l2_subdev_ops tc358746_ops = {
> +	.core = &tc358746_core_ops,
> +	.video = &tc358746_video_ops,
> +	.pad = &tc358746_pad_ops,
> +};
> +
> +static const struct media_entity_operations tc358746_entity_ops = {
> +	.get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
> +	.link_setup = tc358746_link_setup,
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static int tc358746_mclk_enable(struct clk_hw *hw)
> +{
> +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> +	unsigned int div;
> +	u32 val;
> +	int err;
> +
> +	div = tc358746->mclk_postdiv / 2;
> +	val = MCLK_HIGH(div - 1) | MCLK_LOW(div - 1);
> +	dev_dbg(tc358746->sd.dev, "MCLKCTL: %u (0x%x)\n", val, val);
> +	err = tc358746_write(tc358746, MCLKCTL_REG, val);
> +	if (err)
> +		return err;
> +
> +	if (tc358746->mclk_prediv == 8)
> +		val = MCLKDIV(MCLKDIV_8);
> +	else if (tc358746->mclk_prediv == 4)
> +		val = MCLKDIV(MCLKDIV_4);
> +	else
> +		val = MCLKDIV(MCLKDIV_2);
> +
> +	dev_dbg(tc358746->sd.dev, "CLKCTL[MCLKDIV]: %u (0x%x)\n", val, val);
> +	return tc358746_update_bits(tc358746, CLKCTL_REG, MCLKDIV_MASK, val);
> +}
> +
> +static void tc358746_mclk_disable(struct clk_hw *hw)
> +{
> +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> +
> +	tc358746_write(tc358746, MCLKCTL_REG, 0);
> +}
> +
> +static long
> +tc358746_find_mclk_settings(struct tc358746 *tc358746, unsigned long mclk_rate)
> +{
> +	unsigned long pll_rate = tc358746->pll_rate;
> +	const unsigned char prediv[] = { 2, 4, 8 };
> +	unsigned int mclk_prediv, mclk_postdiv;
> +	struct device *dev = tc358746->sd.dev;
> +	unsigned int postdiv, mclkdiv;
> +	unsigned long best_mclk_rate;
> +	unsigned int i;
> +
> +	/*
> +	 *                          MCLK-Div
> +	 *           -------------------´`---------------------
> +	 *          ´                                          `
> +	 *         +-------------+     +------------------------+
> +	 *         | MCLK-PreDiv |     |       MCLK-PostDiv     |
> +	 * PLL --> |   (2/4/8)   | --> | (mclk_low + mclk_high) | --> MCLK
> +	 *         +-------------+     +------------------------+
> +	 *
> +	 * The register value of mclk_low/high is mclk_low/high+1, i.e.:
> +	 *   mclk_low/high = 1   --> 2 MCLK-Ref Counts
> +	 *   mclk_low/high = 255 --> 256 MCLK-Ref Counts == max.
> +	 * If mclk_low and mclk_high are 0 then MCLK is disabled.
> +	 *
> +	 * Keep it simple and support 50/50 duty cycles only for now,
> +	 * so the calc will be:
> +	 *
> +	 *   MCLK = PLL / (MCLK-PreDiv * 2 * MCLK-PostDiv)
> +	 */
> +
> +	if (mclk_rate == tc358746->mclk_rate)
> +		return mclk_rate;
> +
> +	/* Highest possible rate */
> +	mclkdiv = pll_rate / mclk_rate;
> +	if (mclkdiv <= 8) {
> +		mclk_prediv = 2;
> +		mclk_postdiv = 4;
> +		best_mclk_rate = pll_rate / (2 * 4);
> +		goto out;
> +	}
> +
> +	/* First check the prediv */
> +	for (i = 0; i < ARRAY_SIZE(prediv); i++) {
> +		postdiv = mclkdiv / prediv[i];
> +
> +		if (postdiv % 2)
> +			continue;
> +
> +		if (postdiv >= 4 && postdiv <= 512) {
> +			mclk_prediv = prediv[i];
> +			mclk_postdiv = postdiv;
> +			best_mclk_rate = pll_rate / (prediv[i] * postdiv);
> +			goto out;
> +		}
> +	}
> +
> +	/* No suitable prediv found, so try to adjust the postdiv */
> +	for (postdiv = 4; postdiv <= 512; postdiv += 2) {
> +		unsigned int pre;
> +
> +		pre = mclkdiv / postdiv;
> +		if (pre == 2 || pre == 4 || pre == 8) {
> +			mclk_prediv = pre;
> +			mclk_postdiv = postdiv;
> +			best_mclk_rate = pll_rate / (pre * postdiv);
> +			goto out;
> +		}
> +	}
> +
> +	/* The MCLK <-> PLL gap is to high -> use largest possible div */
> +	mclk_prediv = 8;
> +	mclk_postdiv = 512;
> +	best_mclk_rate = pll_rate / (8 * 512);
> +
> +out:
> +	tc358746->mclk_prediv = mclk_prediv;
> +	tc358746->mclk_postdiv = mclk_postdiv;
> +	tc358746->mclk_rate = best_mclk_rate;
> +
> +	if (best_mclk_rate != mclk_rate)
> +		dev_warn(dev, "Request MCLK freq:%lu, found MCLK freq:%lu\n",
> +			 mclk_rate, best_mclk_rate);
> +
> +	dev_dbg(dev, "Found MCLK settings: freq:%lu prediv:%u postdiv:%u\n",
> +		best_mclk_rate, mclk_prediv, mclk_postdiv);
> +
> +	return best_mclk_rate;
> +}
> +
> +unsigned long tc358746_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> +	unsigned int prediv, postdiv;
> +	u32 val;
> +	int err;
> +
> +	err = tc358746_read(tc358746, MCLKCTL_REG, &val);
> +	if (err)
> +		return 0;
> +
> +	postdiv = FIELD_GET(MCLK_LOW_MASK, val) + 1;
> +	postdiv += FIELD_GET(MCLK_HIGH_MASK, val) + 1;
> +
> +	err = tc358746_read(tc358746, CLKCTL_REG, &val);
> +	if (err)
> +		return 0;
> +
> +	prediv = FIELD_GET(MCLKDIV_MASK, val);
> +	if (prediv == MCLKDIV_8)
> +		prediv = 8;
> +	else if (prediv == MCLKDIV_4)
> +		prediv = 4;
> +	else
> +		prediv = 2;
> +
> +	return tc358746->pll_rate / (prediv * postdiv);
> +}
> +
> +static long tc358746_mclk_round_rate(struct clk_hw *hw, unsigned long rate,
> +				     unsigned long *parent_rate)
> +{
> +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> +
> +	*parent_rate = tc358746->pll_rate;
> +
> +	return tc358746_find_mclk_settings(tc358746, rate);
> +}
> +
> +static int tc358746_mclk_set_rate(struct clk_hw *hw, unsigned long rate,
> +				  unsigned long parent_rate)
> +{
> +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> +
> +	tc358746_find_mclk_settings(tc358746, rate);
> +
> +	return tc358746_mclk_enable(hw);
> +}
> +
> +static const struct clk_ops tc358746_mclk_ops = {
> +	.enable = tc358746_mclk_enable,
> +	.disable = tc358746_mclk_disable,
> +	.recalc_rate = tc358746_recalc_rate,
> +	.round_rate = tc358746_mclk_round_rate,
> +	.set_rate = tc358746_mclk_set_rate,
> +};
> +
> +static int tc358746_notify_bound(struct v4l2_async_notifier *notifier,
> +				 struct v4l2_subdev *sd,
> +				 struct v4l2_async_subdev *asd)
> +{
> +	struct tc358746 *tc358746 =
> +		container_of(notifier, struct tc358746, notifier);
> +	struct media_pad *sink = &tc358746->pads[TC358746_SINK];
> +
> +	return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED);
> +}
> +
> +static const struct v4l2_async_notifier_operations tc358746_notify_ops = {
> +	.bound = tc358746_notify_bound,
> +};
> +
> +static int tc358746_async_register(struct tc358746 *tc358746)
> +{
> +	struct v4l2_fwnode_endpoint vep = {
> +		.bus_type = V4L2_MBUS_PARALLEL,
> +	};
> +	struct v4l2_async_subdev *asd;
> +	struct fwnode_handle *ep;
> +	int err;
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(tc358746->sd.dev),
> +					     TC358746_SINK, 0, 0);
> +	if (!ep)
> +		return -ENOTCONN;
> +
> +	err = v4l2_fwnode_endpoint_parse(ep, &vep);
> +	if (err) {
> +		fwnode_handle_put(ep);
> +		return err;
> +	}
> +
> +	v4l2_async_nf_init(&tc358746->notifier);
> +	asd = v4l2_async_nf_add_fwnode_remote(&tc358746->notifier, ep,
> +					      struct v4l2_async_subdev);
> +	if (IS_ERR(asd)) {
> +		fwnode_handle_put(ep);
> +		return PTR_ERR(asd);
> +	}
> +
> +	fwnode_handle_put(ep);
> +
> +	tc358746->notifier.ops = &tc358746_notify_ops;
> +
> +	err = v4l2_async_subdev_nf_register(&tc358746->sd, &tc358746->notifier);
> +	if (err) {
> +		v4l2_async_nf_cleanup(&tc358746->notifier);
> +		return err;
> +	}
> +
> +	tc358746->sd.fwnode = fwnode_graph_get_endpoint_by_id(
> +		dev_fwnode(tc358746->sd.dev), TC358746_SOURCE, 0, 0);
> +
> +	err = v4l2_async_register_subdev(&tc358746->sd);
> +	if (err) {
> +		v4l2_async_nf_unregister(&tc358746->notifier);
> +		v4l2_async_nf_cleanup(&tc358746->notifier);
> +	}
> +
> +	return err;
> +}
> +
> +static int tc358746_probe(struct i2c_client *client)
> +{
> +	struct clk_init_data mclk_initdata = { };
> +	struct device *dev = &client->dev;
> +	struct v4l2_fwnode_endpoint *vep;
> +	unsigned long csi_link_rate;
> +	struct tc358746 *tc358746;
> +	struct fwnode_handle *ep;
> +	unsigned char csi_lanes;
> +	struct v4l2_subdev *sd;
> +	struct v4l2_ctrl *ctrl;
> +	unsigned long refclk;
> +	unsigned int i;
> +	int err;
> +	u32 val;
> +
> +	tc358746 = devm_kzalloc(&client->dev, sizeof(*tc358746), GFP_KERNEL);
> +	if (!tc358746)
> +		return -ENOMEM;
> +
> +	tc358746->regmap = devm_regmap_init_i2c(client, &tc358746_regmap_config);
> +	if (IS_ERR(tc358746->regmap))
> +		return dev_err_probe(dev, PTR_ERR(tc358746->regmap),
> +				     "Failed to init regmap\n");
> +
> +	tc358746->refclk = devm_clk_get(dev, "refclk");
> +	if (IS_ERR(tc358746->refclk))
> +		return dev_err_probe(dev, PTR_ERR(tc358746->refclk),
> +				     "Failed to get refclk\n");
> +
> +	err = clk_prepare_enable(tc358746->refclk);
> +	if (err)
> +		return dev_err_probe(dev, err,
> +				     "Failed to enable refclk\n");
> +
> +	refclk = clk_get_rate(tc358746->refclk);
> +	clk_disable_unprepare(tc358746->refclk);
> +
> +	if (refclk < 6 * MHZ || refclk > 40 * MHZ)
> +		return dev_err_probe(dev, -EINVAL, "Invalid refclk range\n");
> +
> +	for (i = 0; i < ARRAY_SIZE(tc358746_supplies); i++)
> +		tc358746->supplies[i].supply = tc358746_supplies[i];
> +
> +	err = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc358746_supplies),
> +				      tc358746->supplies);
> +	if (err)
> +		return dev_err_probe(dev, err, "Failed to get supplies\n");
> +
> +	tc358746->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> +						       GPIOD_OUT_HIGH);
> +	if (IS_ERR(tc358746->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(tc358746->reset_gpio),
> +				     "Failed to get reset-gpios\n");
> +
> +	sd = &tc358746->sd;
> +	v4l2_i2c_subdev_init(sd, client, &tc358746_ops);
> +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> +	sd->entity.ops = &tc358746_entity_ops;
> +
> +	tc358746->pads[TC358746_SINK].flags = MEDIA_PAD_FL_SINK;
> +	tc358746->pads[TC358746_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> +	err = media_entity_pads_init(&sd->entity, TC358746_NR_PADS,
> +				     tc358746->pads);
> +	if (err)
> +		return dev_err_probe(dev, err,
> +				     "Failed to setup media-entity pads\n");
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), TC358746_SOURCE,
> +					     0, 0);
> +	if (!ep) {
> +		dev_err(dev, "Missing endpoint node\n");
> +		err = -EINVAL;
> +		goto err_mc;
> +	}
> +
> +	/* Currently we only support 'parallel in' -> 'csi out' */
> +	vep = &tc358746->csi_vep;
> +	vep->bus_type = V4L2_MBUS_CSI2_DPHY;
> +	err = v4l2_fwnode_endpoint_alloc_parse(ep, vep);
> +	fwnode_handle_put(ep);
> +	if (err) {
> +		dev_err(dev, "Failed to parse source endpoint\n");
> +		goto err_mc;
> +	}
> +
> +	csi_lanes = vep->bus.mipi_csi2.num_data_lanes;
> +	if (csi_lanes == 0 || csi_lanes > 4 ||
> +	    vep->nr_of_link_frequencies == 0) {
> +		dev_err(dev, "error: Invalid CSI-2 settings\n");
> +		err = -EINVAL;
> +		goto err_vep;
> +	}
> +
> +	/* TODO: Add support to handle multiple link frequencies */
> +	csi_link_rate = (unsigned long)vep->link_frequencies[0];
> +	tc358746->pll_rate = tc358746_find_pll_settings(tc358746, refclk,
> +							csi_link_rate * 2);
> +	if (!tc358746->pll_rate) {
> +		err = -EINVAL;
> +		goto err_vep;
> +	}
> +
> +	err = phy_mipi_dphy_get_default_config_for_hsclk(tc358746->pll_rate,
> +							 csi_lanes,
> +							 &tc358746->dphy_cfg);
> +	if (err)
> +		goto err_vep;
> +
> +	tc358746->mbusfmt = tc358746_def_fmt;
> +	tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> +
> +	dev_set_drvdata(dev, tc358746);
> +	pm_runtime_set_autosuspend_delay(dev, 200);
> +	pm_runtime_use_autosuspend(dev);
> +	pm_runtime_enable(dev);
> +
> +	err = pm_runtime_resume_and_get(dev);
> +	if (err < 0) {
> +		dev_err(dev, "Failed to resume the device\n");
> +		goto err_vep;
> +	}
> +
> +	 /* Ensure that CSI interface is put into LP-11 state */
> +	err = tc358746_sw_reset(tc358746);
> +	if (err) {
> +		pm_runtime_put_noidle(dev);
> +		dev_err(dev, "Failed to reset the device\n");
> +		goto err_pm;
> +	}
> +
> +	err = tc358746_read(tc358746, CHIPID_REG, &val);
> +	pm_runtime_mark_last_busy(dev);
> +	pm_runtime_put_sync_autosuspend(dev);
> +	if (err) {
> +		dev_err(dev, "Failed to read chipid\n");
> +		err = -ENODEV;
> +		goto err_pm;
> +	}
> +
> +	if (FIELD_GET(CHIPID, val) != 0x44) {
> +		dev_err(dev, "Invalid chipid 0x%02x\n",
> +			(u32)FIELD_GET(CHIPID, val));
> +		err = -ENODEV;
> +		goto err_pm;
> +	}
> +
> +	/* Optional MCLK provider support */
> +	if (device_property_present(dev, "#clock-cells")) {
> +		const char *mclk_name;
> +
> +		/* Init to highest possibel MCLK */
> +		tc358746->mclk_postdiv = 512;
> +		tc358746->mclk_prediv = 8;
> +
> +		mclk_name = "tc358746-mclk";
> +		device_property_read_string(dev, "clock-output-names",
> +					    &mclk_name);
> +
> +		mclk_initdata.name = mclk_name;
> +		mclk_initdata.ops = &tc358746_mclk_ops;
> +		tc358746->mclk_hw.init = &mclk_initdata;
> +
> +		err = devm_clk_hw_register(dev, &tc358746->mclk_hw);
> +		if (err) {
> +			dev_err(dev, "Failed to register mclk provider\n");
> +			goto err_pm;
> +		}
> +
> +		err = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> +						  &tc358746->mclk_hw);
> +		if (err) {
> +			dev_err(dev, "Failed to add mclk provider\n");
> +			goto err_pm;
> +		}
> +	}
> +
> +	v4l2_ctrl_handler_init(&tc358746->ctrl_hdl, 1);
> +
> +	ctrl = v4l2_ctrl_new_int_menu(&tc358746->ctrl_hdl, NULL,
> +				      V4L2_CID_LINK_FREQ, 0, 0,
> +				      vep->link_frequencies);
> +	if (ctrl)
> +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	tc358746->sd.ctrl_handler = &tc358746->ctrl_hdl;
> +	if (tc358746->ctrl_hdl.error) {
> +		err = tc358746->ctrl_hdl.error;
> +		goto err_pm;
> +	}
> +
> +	v4l2_ctrl_handler_setup(&tc358746->ctrl_hdl);
> +
> +	err = tc358746_async_register(tc358746);
> +	if (err < 0)
> +		goto err_ctrl;
> +
> +	dev_info(dev, "%s found @ 0x%x (%s)\n", client->name,
> +		  client->addr, client->adapter->name);

I'd skip this to avoid adding noise to the kernel log at boot time. I
would also probably split some of the code out of the probe function as
it's fairly large. Up to you.

> +
> +	return 0;
> +
> +err_ctrl:
> +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> +err_pm:
> +	pm_runtime_disable(dev);
> +	pm_runtime_set_suspended(dev);
> +	pm_runtime_dont_use_autosuspend(dev);
> +err_vep:
> +	v4l2_fwnode_endpoint_free(vep);
> +err_mc:
> +	media_entity_cleanup(&sd->entity);
> +
> +	return err;
> +}
> +
> +static int tc358746_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct tc358746 *tc358746 = to_tc358746(sd);
> +
> +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> +	v4l2_fwnode_endpoint_free(&tc358746->csi_vep);
> +	v4l2_async_nf_unregister(&tc358746->notifier);
> +	v4l2_async_nf_cleanup(&tc358746->notifier);
> +	v4l2_async_unregister_subdev(sd);
> +	v4l2_device_unregister_subdev(sd);

This shouldn't be needed v4l2_async_unregister_subdev() should be
enough.

> +	media_entity_cleanup(&sd->entity);
> +
> +	pm_runtime_disable(sd->dev);
> +	pm_runtime_set_suspended(sd->dev);
> +	pm_runtime_dont_use_autosuspend(sd->dev);
> +
> +	return 0;
> +}
> +
> +static int tc358746_suspend(struct device *dev)
> +{
> +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(tc358746->refclk);
> +
> +	return regulator_bulk_disable(ARRAY_SIZE(tc358746_supplies),
> +				      tc358746->supplies);

Shouldn't you reenable the clock if this fails ?

> +}
> +
> +static int tc358746_resume(struct device *dev)
> +{
> +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> +	int err;
> +
> +	gpiod_set_value(tc358746->reset_gpio, 1);
> +
> +	err = regulator_bulk_enable(ARRAY_SIZE(tc358746_supplies),
> +				    tc358746->supplies);
> +	if (err)
> +		return err;
> +
> +	/* min. 200ns */
> +	usleep_range(10, 20);
> +
> +	gpiod_set_value(tc358746->reset_gpio, 0);
> +
> +	err = clk_prepare_enable(tc358746->refclk);
> +	if (err)
> +		return err;

The regulators need to be disabled in case of failure here and below
(and so does the clock below).

> +
> +	/* min. 700us ... 1ms */
> +	usleep_range(1000, 1500);
> +
> +	/* Sync state */
> +	err = tc358746_apply_pll_config(tc358746);
> +	if (err)
> +		return err;
> +
> +	err = tc358746_apply_dphy_config(tc358746);
> +	if (err)
> +		return err;
> +
> +	return tc358746_apply_misc_config(tc358746);

Does all this belong to the PM resume handler ? It seems configuration
could be handled in .s_stream() instead.

> +}
> +
> +DEFINE_RUNTIME_DEV_PM_OPS(tc358746_pm_ops, tc358746_suspend,
> +			  tc358746_resume, NULL);
> +
> +static const struct of_device_id __maybe_unused tc358746_of_match[] = {
> +	{ .compatible = "toshiba,tc358746" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, tc358746_of_match);
> +
> +static struct i2c_driver tc358746_driver = {
> +	.driver = {
> +		.name = "tc358746",
> +		.pm = pm_ptr(&tc358746_pm_ops),
> +		.of_match_table = tc358746_of_match,
> +	},
> +	.probe_new = tc358746_probe,
> +	.remove = tc358746_remove,
> +};
> +
> +module_i2c_driver(tc358746_driver);
> +
> +MODULE_DESCRIPTION("Toshiba TC358746 Parallel to CSI-2 bridge driver");
> +MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
> +MODULE_LICENSE("GPL");
Marco Felsch Sept. 15, 2022, 4:54 p.m. UTC | #2
Hi Laurent,

On 22-09-05, Laurent Pinchart wrote:
> Hi Marco,
> 
> Thank you for the patch.
> 
> On Thu, Aug 18, 2022 at 04:33:07PM +0200, Marco Felsch wrote:
> > Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
> > supports two operating modes:
> >   1st) parallel-in -> mipi-csi out
> >   2nd) mipi-csi in -> parallel out
> > 
> > This patch only adds the support for the 1st mode.
> > 
> > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > ---
> >  drivers/media/i2c/Kconfig    |   17 +
> >  drivers/media/i2c/Makefile   |    1 +
> >  drivers/media/i2c/tc358746.c | 1645 ++++++++++++++++++++++++++++++++++
> >  3 files changed, 1663 insertions(+)
> >  create mode 100644 drivers/media/i2c/tc358746.c
> > 
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 7806d4b81716..aefb9c9e0c08 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -1272,6 +1272,23 @@ config VIDEO_TC358743_CEC
> >  	  When selected the tc358743 will support the optional
> >  	  HDMI CEC feature.
> >  
> > +config VIDEO_TC358746
> > +	tristate "Toshiba TC358746 parallel-CSI2 bridge"
> > +	depends on VIDEO_DEV && I2C
> > +	select VIDEO_V4L2_SUBDEV_API
> > +	select MEDIA_CONTROLLER
> > +	select V4L2_FWNODE
> > +	select GENERIC_PHY_MIPI_DPHY
> > +	select REGMAP_I2C
> > +	select COMMON_CLK
> > +	help
> > +	  Support for the Toshiba TC358746 parallel to MIPI CSI-2 bridge.
> > +	  The bridge can work in both directions but currently only the
> > +	  parallel-in / csi-out path is supported.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called tc358746.
> > +
> >  config VIDEO_TVP514X
> >  	tristate "Texas Instruments TVP514x video decoder"
> >  	depends on VIDEO_DEV && I2C
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index 0a2933103dd9..d1096c2ab480 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -118,6 +118,7 @@ obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
> >  obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
> >  obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
> >  obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
> > +obj-$(CONFIG_VIDEO_TC358746) += tc358746.o
> >  obj-$(CONFIG_VIDEO_TDA1997X) += tda1997x.o
> >  obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
> >  obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
> > diff --git a/drivers/media/i2c/tc358746.c b/drivers/media/i2c/tc358746.c
> > new file mode 100644
> > index 000000000000..7b71d0cf72a9
> > --- /dev/null
> > +++ b/drivers/media/i2c/tc358746.c
> > @@ -0,0 +1,1645 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * TC358746 - Parallel <-> CSI-2 Bridge
> > + *
> > + * Copyright 2022 Marco Felsch <kernel@pengutronix.de>
> > + *
> > + * Notes:
> > + *  - Currently only 'Parallel-in -> CSI-out' mode is supported!
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/delay.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/phy/phy-mipi-dphy.h>
> > +#include <linux/property.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regmap.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-mc.h>
> > +
> > +/* 16-bit registers */
> > +#define CHIPID_REG			0x0000
> > +#define		CHIPID			GENMASK(15, 8)
> > +
> > +#define SYSCTL_REG			0x0002
> > +#define		SRESET			BIT(0)
> > +
> > +#define CONFCTL_REG			0x0004
> > +#define		PDATAF_MASK		GENMASK(9, 8)
> > +#define		PDATAF_MODE0		0
> > +#define		PDATAF_MODE1		1
> > +#define		PDATAF_MODE2		2
> > +#define		PDATAF(val)		FIELD_PREP(PDATAF_MASK, (val))
> > +#define		PPEN			BIT(6)
> > +#define		DATALANE_MASK		GENMASK(1, 0)
> > +
> > +#define FIFOCTL_REG			0x0006
> > +#define DATAFMT_REG			0x0008
> > +#define		PDFMT(val)		FIELD_PREP(GENMASK(7, 4), (val))
> > +
> > +#define MCLKCTL_REG			0x000c
> > +#define		MCLK_HIGH_MASK		GENMASK(15, 8)
> > +#define		MCLK_LOW_MASK		GENMASK(7, 0)
> > +#define		MCLK_HIGH(val)		FIELD_PREP(MCLK_HIGH_MASK, (val))
> > +#define		MCLK_LOW(val)		FIELD_PREP(MCLK_LOW_MASK, (val))
> > +
> > +#define PLLCTL0_REG			0x0016
> > +#define		PLL_PRD_MASK		GENMASK(15, 12)
> > +#define		PLL_PRD(val)		FIELD_PREP(PLL_PRD_MASK, (val))
> > +#define		PLL_FBD_MASK		GENMASK(8, 0)
> > +#define		PLL_FBD(val)		FIELD_PREP(PLL_FBD_MASK, (val))
> > +
> > +#define PLLCTL1_REG			0x0018
> > +#define		PLL_FRS_MASK		GENMASK(11, 10)
> > +#define		PLL_FRS(val)		FIELD_PREP(PLL_FRS_MASK, (val))
> > +#define		CKEN			BIT(4)
> > +#define		RESETB			BIT(1)
> > +#define		PLL_EN			BIT(0)
> > +
> > +#define CLKCTL_REG			0x0020
> > +#define		MCLKDIV_MASK		GENMASK(3, 2)
> > +#define		MCLKDIV(val)		FIELD_PREP(MCLKDIV_MASK, (val))
> > +#define		MCLKDIV_8		0
> > +#define		MCLKDIV_4		1
> > +#define		MCLKDIV_2		2
> > +
> > +#define WORDCNT_REG			0x0022
> > +#define PP_MISC_REG			0x0032
> > +#define		FRMSTOP			BIT(15)
> > +#define		RSTPTR			BIT(14)
> > +
> > +/* 32-bit registers */
> > +#define CLW_DPHYCONTTX_REG		0x0100
> > +#define CLW_CNTRL_REG			0x0140
> > +#define D0W_CNTRL_REG			0x0144
> > +#define		LANEDISABLE		BIT(0)
> > +
> > +#define STARTCNTRL_REG			0x0204
> > +#define		START			BIT(0)
> > +
> > +#define LINEINITCNT_REG			0x0210
> > +#define LPTXTIMECNT_REG			0x0214
> > +#define TCLK_HEADERCNT_REG		0x0218
> > +#define		TCLK_ZEROCNT(val)	FIELD_PREP(GENMASK(15, 8), (val))
> > +#define		TCLK_PREPARECNT(val)	FIELD_PREP(GENMASK(6, 0), (val))
> > +
> > +#define TCLK_TRAILCNT_REG		0x021C
> > +#define THS_HEADERCNT_REG		0x0220
> > +#define		THS_ZEROCNT(val)	FIELD_PREP(GENMASK(14, 8), (val))
> > +#define		THS_PREPARECNT(val)	FIELD_PREP(GENMASK(6, 0), (val))
> > +
> > +#define TWAKEUP_REG			0x0224
> > +#define TCLK_POSTCNT_REG		0x0228
> > +#define THS_TRAILCNT_REG		0x022C
> > +#define HSTXVREGEN_REG			0x0234
> > +#define TXOPTIONCNTRL_REG		0x0238
> > +#define CSI_CONTROL_REG			0x040C
> > +#define		CSI_MODE		BIT(15)
> > +#define		TXHSMD			BIT(7)
> > +#define		NOL(val)		FIELD_PREP(GENMASK(2, 1), (val))
> > +
> > +#define CSI_CONFW_REG			0x0500
> > +#define		MODE(val)		FIELD_PREP(GENMASK(31, 29), (val))
> > +#define		MODE_SET		0x5
> > +#define		ADDRESS(val)		FIELD_PREP(GENMASK(28, 24), (val))
> > +#define		CSI_CONTROL_ADDRESS	0x3
> > +#define		DATA(val)		FIELD_PREP(GENMASK(15, 0), (val))
> > +
> > +#define CSI_START_REG			0x0518
> > +#define		STRT			BIT(0)
> > +
> > +static const struct v4l2_mbus_framefmt tc358746_def_fmt = {
> > +	.width		= 640,
> > +	.height		= 480,
> > +	.code		= MEDIA_BUS_FMT_UYVY8_2X8,
> > +	.field		= V4L2_FIELD_NONE,
> > +	.colorspace	= V4L2_COLORSPACE_DEFAULT,
> > +	.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
> > +	.quantization	= V4L2_QUANTIZATION_DEFAULT,
> > +	.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
> > +};
> > +
> > +static const char * const tc358746_supplies[] = {
> > +	"vddc", "vddio", "vddmipi"
> > +};
> > +
> > +enum {
> > +	TC358746_SINK,
> > +	TC358746_SOURCE,
> > +	TC358746_NR_PADS
> > +};
> > +
> > +struct tc358746 {
> > +	struct v4l2_subdev		sd;
> > +	struct media_pad		pads[TC358746_NR_PADS];
> > +	struct v4l2_async_notifier	notifier;
> > +	struct v4l2_mbus_framefmt	mbusfmt;
> 
> Could you use the active state API instead of manually storing mbusfmt
> here ? It involves

I will do that, thanks for the hint and it also elimates a few basic
checks like the pad-num check.

> - Implementing the .init_cfg() operation
> - Calling v4l2_subdev_init_finalize() in probe
> - Replacing calls to __tc358746_get_pad_format() with
>   v4l2_subdev_get_pad_format()
> - Propagating the format from sink to source in tc358746_set_fmt()
> - Dropping tc358746_src_mbus_code() from tc358746_get_fmt() and simply
>   retrieving the format using v4l2_subdev_get_pad_format() there
> - Dropping this field
> 
> The formats for both the ACTIVE and TRY states will then be stored in
> the subdev state, unconditionally. You can retrieve the active state
> with v4l2_subdev_get_locked_active_state() in tc358746_s_stream().
> 
> > +	struct v4l2_fwnode_endpoint	csi_vep;
> > +
> > +	struct v4l2_ctrl_handler	ctrl_hdl;
> > +
> > +	struct regmap			*regmap;
> > +	struct clk			*refclk;
> > +	struct gpio_desc		*reset_gpio;
> > +	struct regulator_bulk_data	supplies[ARRAY_SIZE(tc358746_supplies)];
> > +
> > +	struct clk_hw			mclk_hw;
> > +	unsigned long			mclk_rate;
> > +	u8				mclk_prediv;
> > +	u16				mclk_postdiv;
> > +
> > +	unsigned long			pll_rate;
> > +	u8				pll_post_div;
> > +	u16				pll_pre_div;
> > +	u16				pll_mul;
> > +
> > +	struct v4l2_ctrl		*sensor_pclk_ctrl;
> > +
> > +#define TC358746_VB_MAX_SIZE		(511 * 32)
> > +#define TC358746_VB_DEFAULT_SIZE	  (1 * 32)
> > +	unsigned int			vb_size; /* Video buffer size in bits */
> > +
> > +	struct phy_configure_opts_mipi_dphy dphy_cfg;
> > +};
> > +
> > +static inline struct tc358746 *to_tc358746(struct v4l2_subdev *sd)
> > +{
> > +	return container_of(sd, struct tc358746, sd);
> > +}
> > +
> > +static inline struct tc358746 *clk_hw_to_tc358746(struct clk_hw *hw)
> > +{
> > +	return container_of(hw, struct tc358746, mclk_hw);
> > +}
> > +
> > +struct tc358746_format {
> > +	u32		code;
> > +	bool		csi_format;
> > +	unsigned char	bus_width;
> > +	unsigned char	bpp;
> > +	/* Register values */
> > +	u8		pdformat; /* Peripheral Data Format */
> > +	u8		pdataf;   /* Parallel Data Format Option */
> > +};
> > +
> > +enum {
> > +	PDFORMAT_RAW8 = 0,
> > +	PDFORMAT_RAW10,
> > +	PDFORMAT_RAW12,
> > +	PDFORMAT_RGB888,
> > +	PDFORMAT_RGB666,
> > +	PDFORMAT_RGB565,
> > +	PDFORMAT_YUV422_8BIT,
> > +	/* RESERVED = 7 */
> > +	PDFORMAT_RAW14 = 8,
> > +	PDFORMAT_YUV422_10BIT,
> > +	PDFORMAT_YUV444,
> > +};
> > +
> > +/* Check tc358746_src_mbus_code() if you add new formats */
> > +static const struct tc358746_format tc358746_formats[] = {
> > +	{
> > +		.code = MEDIA_BUS_FMT_UYVY8_2X8,
> > +		.bus_width = 8,
> > +		.bpp = 16,
> > +		.pdformat = PDFORMAT_YUV422_8BIT,
> > +		.pdataf = PDATAF_MODE0,
> > +	}, {
> > +		.code = MEDIA_BUS_FMT_UYVY8_1X16,
> > +		.csi_format = true,
> > +		.bus_width = 16,
> > +		.bpp = 16,
> > +		.pdformat = PDFORMAT_YUV422_8BIT,
> > +		.pdataf = PDATAF_MODE1,
> > +	}, {
> > +		.code = MEDIA_BUS_FMT_YUYV8_1X16,
> > +		.csi_format = true,
> > +		.bus_width = 16,
> > +		.bpp = 16,
> > +		.pdformat = PDFORMAT_YUV422_8BIT,
> > +		.pdataf = PDATAF_MODE2,
> > +	}, {
> > +		.code = MEDIA_BUS_FMT_UYVY10_2X10,
> > +		.bus_width = 10,
> > +		.bpp = 20,
> > +		.pdformat = PDFORMAT_YUV422_10BIT,
> > +		.pdataf = PDATAF_MODE0, /* don't care */
> > +	}, {
> > +		/* in datasheet listed as YUV444 */
> > +		.code = MEDIA_BUS_FMT_GBR888_1X24,
> > +		.csi_format = true,
> > +		.bus_width = 24,
> > +		.bpp = 24,
> > +		.pdformat = PDFORMAT_YUV444,
> 
> This looks quite weird, does 24-bit RGB really map to the CSI-2 YUV444
> data type ?

It is written in the comments.. but I can drop for now since I don't
have a device to ensure it.

> > +		.pdataf = PDATAF_MODE0, /* don't care */
> > +	},
> > +};
> > +
> > +/* Get n-th format for pad */
> > +static const struct tc358746_format *
> > +tc358746_get_format_by_idx(unsigned int pad, unsigned int index)
> > +{
> > +	unsigned int idx = 0;
> > +	unsigned int i;
> > +
> > +	if (pad >= TC358746_NR_PADS)
> > +		return ERR_PTR(-EINVAL);
> 
> That should be tested by the subdev core, I think you can drop the
> check. Same below.

Yes, thanks :)

> > +
> > +	for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) {
> > +		const struct tc358746_format *fmt = &tc358746_formats[i];
> > +
> > +		if ((pad == TC358746_SOURCE && fmt->csi_format) ||
> > +		    (pad == TC358746_SINK)) {
> > +			if (idx == index)
> > +				return fmt;
> > +			idx++;
> > +		}
> > +	}
> > +
> > +	return ERR_PTR(-EINVAL);
> > +}
> > +
> > +static const struct tc358746_format *
> > +tc358746_get_format_by_code(unsigned int pad, u32 code)
> > +{
> > +	unsigned int i;
> > +
> > +	if (pad >= TC358746_NR_PADS)
> > +		return ERR_PTR(-EINVAL);
> > +
> > +	for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) {
> > +		const struct tc358746_format *fmt = &tc358746_formats[i];
> > +
> > +		if (pad == TC358746_SINK && fmt->code == code)
> > +			return fmt;
> > +
> > +		if (pad == TC358746_SOURCE && fmt->csi_format &&
> > +		    fmt->code == code)
> > +			return fmt;
> 
> You could also write
> 
> 		if (pad == TC358746_SOURCE && !fmt->csi_format)
> 			continue;
> 
> 		if (fmt->code == code)
> 			return fmt;
> 
> Up to you.

Okay, I will do that.

> > +	}
> > +
> > +	return ERR_PTR(-EINVAL);
> > +}
> > +
> > +static u32 tc358746_src_mbus_code(u32 code)
> > +{
> > +	switch (code) {
> > +	case MEDIA_BUS_FMT_UYVY8_2X8:
> > +		return MEDIA_BUS_FMT_UYVY8_1X16;
> > +	case MEDIA_BUS_FMT_UYVY10_2X10:
> > +		return MEDIA_BUS_FMT_UYVY10_1X20;
> > +	default:
> > +		return code;
> > +	}
> > +}
> > +
> > +static bool tc358746_writeable_reg(struct device *dev, unsigned int reg)
> > +{
> > +	switch (reg) {
> > +	case SYSCTL_REG ... CSI_START_REG:
> > +		return true;
> > +	default:
> > +		return false;
> > +	}
> > +}
> > +
> > +static bool tc358746_readable_reg(struct device *dev, unsigned int reg)
> > +{
> > +	switch (reg) {
> > +	case CHIPID_REG ... CSI_START_REG:
> > +		return true;
> > +	default:
> > +		return false;
> > +	}
> > +}
> > +
> > +static const struct regmap_config tc358746_regmap_config = {
> > +	.name = "tc358746",
> > +	.reg_bits = 16,
> > +	.val_bits = 16,
> > +	.max_register = CSI_START_REG,
> > +	.writeable_reg = tc358746_writeable_reg,
> > +	.readable_reg = tc358746_readable_reg,
> > +	.reg_format_endian = REGMAP_ENDIAN_BIG,
> > +	.val_format_endian = REGMAP_ENDIAN_BIG,
> > +};
> > +
> > +static int tc358746_write(struct tc358746 *tc358746, u32 reg, u32 val)
> > +{
> > +	size_t count;
> > +
> > +	/* 32-bit registers starting from CLW_DPHYCONTTX */
> > +	count = reg < CLW_DPHYCONTTX_REG ? 1 : 2;
> > +
> > +	return regmap_bulk_write(tc358746->regmap, reg, &val, count);
> > +}
> > +
> > +static int tc358746_read(struct tc358746 *tc358746, u32 reg, u32 *val)
> > +{
> > +	size_t count;
> > +
> > +	/* 32-bit registers starting from CLW_DPHYCONTTX */
> > +	count = reg < CLW_DPHYCONTTX_REG ? 1 : 2;
> > +	*val = 0;
> > +
> > +	return regmap_bulk_read(tc358746->regmap, reg, val, count);
> > +}
> > +
> > +static int
> > +tc358746_update_bits(struct tc358746 *tc358746, u32 reg, u32 mask, u32 val)
> > +{
> > +	u32 tmp, orig;
> > +	int err;
> > +
> > +	err = tc358746_read(tc358746, reg, &orig);
> > +	if (err)
> > +		return err;
> > +
> > +	tmp = orig & ~mask;
> > +	tmp |= val & mask;
> > +
> > +	return tc358746_write(tc358746, reg, tmp);
> > +}
> > +
> > +static int tc358746_set_bits(struct tc358746 *tc358746, u32 reg, u32 bits)
> > +{
> > +	return tc358746_update_bits(tc358746, reg, bits, bits);
> > +}
> > +
> > +static int tc358746_clear_bits(struct tc358746 *tc358746, u32 reg, u32 bits)
> > +{
> > +	return tc358746_update_bits(tc358746, reg, bits, 0);
> > +}
> > +
> > +static int tc358746_sw_reset(struct tc358746 *tc358746)
> > +{
> > +	int err;
> > +
> > +	err = tc358746_set_bits(tc358746, SYSCTL_REG, SRESET);
> > +	if (err)
> > +		return err;
> > +
> > +	udelay(10);
> > +
> > +	return tc358746_clear_bits(tc358746, SYSCTL_REG, SRESET);
> > +}
> > +
> > +static int
> > +tc358746_apply_pll_config(struct tc358746 *tc358746)
> > +{
> > +	u8 post = tc358746->pll_post_div;
> > +	u16 pre = tc358746->pll_pre_div;
> > +	u16 mul = tc358746->pll_mul;
> > +	u32 val, mask;
> > +	int err;
> > +
> > +	err = tc358746_read(tc358746, PLLCTL1_REG, &val);
> > +	if (err)
> > +		return err;
> > +
> > +	/* Don't touch the PLL if running */
> > +	if (FIELD_GET(PLL_EN, val) == 1)
> > +		return 0;
> > +
> > +	/* Pre-div and Multiplicator have a internal +1 logic */
> > +	val = PLL_PRD(pre - 1) | PLL_FBD(mul - 1);
> > +	mask = PLL_PRD_MASK | PLL_FBD_MASK;
> > +	err = tc358746_update_bits(tc358746, PLLCTL0_REG, mask, val);
> > +	if (err)
> > +		return err;
> > +
> > +	val = PLL_FRS(ilog2(post)) | RESETB | PLL_EN;
> > +	mask = PLL_FRS_MASK | RESETB | PLL_EN;
> > +	tc358746_update_bits(tc358746, PLLCTL1_REG, mask, val);
> > +	if (err)
> > +		return err;
> > +
> > +	udelay(1000);
> > +
> > +	return tc358746_set_bits(tc358746, PLLCTL1_REG, CKEN);
> > +}
> > +
> > +static int tc358746_apply_misc_config(struct tc358746 *tc358746)
> > +{
> > +	struct device *dev = tc358746->sd.dev;
> > +	const struct tc358746_format *fmt;
> > +	u32 val;
> > +	int err;
> > +
> > +	fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
> > +	if (IS_ERR(fmt))
> > +		return PTR_ERR(fmt);
> 
> mbusfmt.code is supposed to have been validated, so you can drop the
> error check here.

Yes.

> > +
> > +	/* Self defined CSI user data type id's are not supported yet */
> > +	val = PDFMT(fmt->pdformat);
> > +	dev_dbg(dev, "DATAFMT: 0x%x\n", val);
> > +	err = tc358746_write(tc358746, DATAFMT_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	val = PDATAF(fmt->pdataf);
> > +	dev_dbg(dev, "CONFCTL[PDATAF]: 0x%x\n", fmt->pdataf);
> > +	err = tc358746_update_bits(tc358746, CONFCTL_REG, PDATAF_MASK, val);
> > +	if (err)
> > +		return err;
> > +
> > +	val = tc358746->vb_size / 32;
> > +	dev_dbg(dev, "FIFOCTL: %u (0x%x)\n", val, val);
> > +	err = tc358746_write(tc358746, FIFOCTL_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	/* Total number of bytes for each line/width */
> > +	val = tc358746->mbusfmt.width * fmt->bpp / 8;
> > +	dev_dbg(dev, "WORDCNT: %u (0x%x)\n", val, val);
> > +	return tc358746_write(tc358746, WORDCNT_REG, val);
> > +}
> > +
> > +#ifndef MHZ
> 
> Where would it be previously defined ? This sounds like asking for
> trouble later.

Sorry I don't get that, do you mean that I should define it at the very
beginning?

> > +#define MHZ		(1000 * 1000)
> > +#endif
> > +
> > +/* Use MHz as base so the div needs no u64 */
> > +static u32 tc358746_cfg_to_cnt(unsigned int cfg_val,
> > +			       unsigned int clk_mhz,
> > +			       unsigned int time_base)
> > +{
> > +	return DIV_ROUND_UP(cfg_val * clk_mhz, time_base);
> > +}
> > +
> > +static u32 tc358746_ps_to_cnt(unsigned int cfg_val,
> > +			      unsigned int clk_mhz)
> > +{
> > +	return tc358746_cfg_to_cnt(cfg_val, clk_mhz, USEC_PER_SEC);
> > +}
> > +
> > +static u32 tc358746_us_to_cnt(unsigned int cfg_val,
> > +			      unsigned int clk_mhz)
> > +{
> > +	return tc358746_cfg_to_cnt(cfg_val, clk_mhz, 1);
> > +}
> > +
> > +static int tc358746_apply_dphy_config(struct tc358746 *tc358746)
> > +{
> > +	struct phy_configure_opts_mipi_dphy *cfg = &tc358746->dphy_cfg;
> > +	bool non_cont_clk = !!(tc358746->csi_vep.bus.mipi_csi2.flags &
> > +			       V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK);
> > +	struct device *dev = tc358746->sd.dev;
> > +	unsigned long hs_byte_clk, hf_clk;
> > +	u32 val, val2, lptxcnt;
> > +	int err;
> > +
> > +	/* The hs_byte_clk is also called SYSCLK in the excel sheet */
> > +	hs_byte_clk = cfg->hs_clk_rate / 8;
> > +	hs_byte_clk /= MHZ;
> > +	hf_clk = hs_byte_clk / 2;
> > +
> > +	val = tc358746_us_to_cnt(cfg->init, hf_clk) - 1;
> > +	dev_dbg(dev, "LINEINITCNT: %u (0x%x)\n", val, val);
> > +	err = tc358746_write(tc358746, LINEINITCNT_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	val = tc358746_ps_to_cnt(cfg->lpx, hs_byte_clk) - 1;
> > +	lptxcnt = val;
> > +	dev_dbg(dev, "LPTXTIMECNT: %u (0x%x)\n", val, val);
> > +	err = tc358746_write(tc358746, LPTXTIMECNT_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	val = tc358746_ps_to_cnt(cfg->clk_prepare, hs_byte_clk) - 1;
> > +	val2 = tc358746_ps_to_cnt(cfg->clk_zero, hs_byte_clk) - 1;
> > +	dev_dbg(dev, "TCLK_PREPARECNT: %u (0x%x)\n", val, val);
> > +	dev_dbg(dev, "TCLK_ZEROCNT: %u (0x%x)\n", val2, val2);
> > +	dev_dbg(dev, "TCLK_HEADERCNT: 0x%x\n",
> > +		(u32)(TCLK_PREPARECNT(val) | TCLK_ZEROCNT(val2)));
> > +	err = tc358746_write(tc358746, TCLK_HEADERCNT_REG,
> > +			     TCLK_PREPARECNT(val) | TCLK_ZEROCNT(val2));
> > +	if (err)
> > +		return err;
> > +
> > +	val = tc358746_ps_to_cnt(cfg->clk_trail, hs_byte_clk);
> > +	dev_dbg(dev, "TCLK_TRAILCNT: %u (0x%x)\n", val, val);
> > +	err = tc358746_write(tc358746, TCLK_TRAILCNT_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	val = tc358746_ps_to_cnt(cfg->hs_prepare, hs_byte_clk) - 1;
> > +	val2 = tc358746_ps_to_cnt(cfg->hs_zero, hs_byte_clk) - 1;
> > +	dev_dbg(dev, "THS_PREPARECNT: %u (0x%x)\n", val, val);
> > +	dev_dbg(dev, "THS_ZEROCNT: %u (0x%x)\n", val2, val2);
> > +	dev_dbg(dev, "THS_HEADERCNT: 0x%x\n",
> > +		(u32)(THS_PREPARECNT(val) | THS_ZEROCNT(val2)));
> > +	err = tc358746_write(tc358746, THS_HEADERCNT_REG,
> > +			     THS_PREPARECNT(val) | THS_ZEROCNT(val2));
> > +	if (err)
> > +		return err;
> > +
> > +	/* TWAKEUP > 1ms in lptxcnt steps */
> > +	val = tc358746_us_to_cnt(cfg->wakeup, hs_byte_clk);
> > +	val = val / (lptxcnt + 1) - 1;
> > +	dev_dbg(dev, "TWAKEUP: %u (0x%x)\n", val, val);
> > +	err = tc358746_write(tc358746, TWAKEUP_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	val = tc358746_ps_to_cnt(cfg->clk_post, hs_byte_clk);
> > +	dev_dbg(dev, "TCLK_POSTCNT: %u (0x%x)\n", val, val);
> > +	err = tc358746_write(tc358746, TCLK_POSTCNT_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	val = tc358746_ps_to_cnt(cfg->hs_trail, hs_byte_clk);
> > +	dev_dbg(dev, "THS_TRAILCNT: %u (0x%x)\n", val, val);
> > +	err = tc358746_write(tc358746, THS_TRAILCNT_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	dev_dbg(dev, "CONTCLKMODE: %u", non_cont_clk ? 0 : 1);
> > +	return  tc358746_write(tc358746, TXOPTIONCNTRL_REG, non_cont_clk ? 0 : 1);
> > +}
> > +
> > +#define MAX_DATA_LANES 4
> > +
> > +static int tc358746_enable_csi_lanes(struct tc358746 *tc358746, int enable)
> > +{
> > +	unsigned int lanes = tc358746->dphy_cfg.lanes;
> > +	unsigned int lane;
> > +	u32 reg, val;
> > +	int err;
> > +
> > +	err = tc358746_update_bits(tc358746, CONFCTL_REG, DATALANE_MASK,
> > +				   lanes - 1);
> > +	if (err)
> > +		return err;
> > +
> > +	/* Clock lane */
> > +	val = enable ? 0 : LANEDISABLE;
> > +	dev_dbg(tc358746->sd.dev, "CLW_CNTRL: 0x%x\n", val);
> > +	err = tc358746_write(tc358746, CLW_CNTRL_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	for (lane = 0; lane < MAX_DATA_LANES; lane++) {
> > +		/* Data lanes */
> > +		reg = D0W_CNTRL_REG + lane * 0x4;
> > +		val = (enable && lane < lanes) ? 0 : LANEDISABLE;
> > +
> > +		dev_dbg(tc358746->sd.dev, "D%uW_CNTRL: 0x%x\n", lane, val);
> > +		err = tc358746_write(tc358746, reg, val);
> > +		if (err)
> > +			return err;
> > +	}
> > +
> > +	val = 0;
> > +	if (enable) {
> > +		/* Clock lane */
> > +		val |= BIT(0);
> > +
> > +		/* Data lanes */
> > +		for (lane = 1; lane <= lanes; lane++)
> > +			val |= BIT(lane);
> > +	}
> > +
> > +	dev_dbg(tc358746->sd.dev, "HSTXVREGEN: 0x%x\n", val);
> > +	return tc358746_write(tc358746, HSTXVREGEN_REG, val);
> > +}
> > +
> > +static int tc358746_enable_csi_module(struct tc358746 *tc358746, int enable)
> > +{
> > +	unsigned int lanes = tc358746->dphy_cfg.lanes;
> > +	int err;
> > +
> > +	/*
> > +	 * START and STRT are only reseted/disabled by sw reset. This is
> > +	 * required to put the lane state back into LP-11 state. The sw reset
> > +	 * don't reset register values.
> > +	 */
> > +	if (!enable)
> > +		return tc358746_sw_reset(tc358746);
> > +
> > +	err = tc358746_write(tc358746, STARTCNTRL_REG, START);
> > +	if (err)
> > +		return err;
> > +
> > +	err = tc358746_write(tc358746, CSI_START_REG, STRT);
> > +	if (err)
> > +		return err;
> > +
> > +	/* CSI_CONTROL_REG is only indirect accessible */
> > +	return tc358746_write(tc358746, CSI_CONFW_REG,
> > +			      MODE(MODE_SET) |
> > +			      ADDRESS(CSI_CONTROL_ADDRESS) |
> > +			      DATA(CSI_MODE | TXHSMD | NOL(lanes - 1)));
> > +}
> > +
> > +static int tc358746_enable_parallel_port(struct tc358746 *tc358746, int enable)
> > +{
> > +	int err;
> > +
> > +	if (enable) {
> > +		err = tc358746_write(tc358746, PP_MISC_REG, 0);
> > +		if (err)
> > +			return err;
> > +
> > +		return tc358746_set_bits(tc358746, CONFCTL_REG, PPEN);
> > +	}
> > +
> > +	err = tc358746_set_bits(tc358746, PP_MISC_REG, FRMSTOP);
> > +	if (err)
> > +		return err;
> > +
> > +	err = tc358746_clear_bits(tc358746, CONFCTL_REG, PPEN);
> > +	if (err)
> > +		return err;
> > +
> > +	return tc358746_set_bits(tc358746, PP_MISC_REG, RSTPTR);
> > +}
> > +
> > +static inline struct v4l2_subdev *tc358746_get_remote_sd(struct media_pad *pad)
> > +{
> > +	pad = media_pad_remote_pad_first(pad);
> > +	if (!pad)
> > +		return NULL;
> > +
> > +	return media_entity_to_v4l2_subdev(pad->entity);
> > +}
> > +
> > +static int tc358746_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > +	struct v4l2_subdev *src;
> > +	int err;
> > +
> > +	dev_dbg(sd->dev, "%sable\n", enable ? "en" : "dis");
> > +
> > +	src = tc358746_get_remote_sd(&tc358746->pads[TC358746_SINK]);
> > +	if (!src)
> > +		return -EPIPE;
> > +
> > +	if (enable) {
> > +		err = pm_runtime_resume_and_get(sd->dev);
> > +		if (err)
> > +			return err;
> > +
> > +		err = tc358746_enable_csi_lanes(tc358746, 1);
> > +		if (err) {
> > +			pm_runtime_mark_last_busy(sd->dev);
> > +			pm_runtime_put_sync_autosuspend(sd->dev);
> > +			return err;
> 
> Looks like a candidate for a goto statement.

Thought about it too but than I thought about the placement of the
label and I went this way. I can change it. Should the label placed at
the end of the function or at the end of this block.

> > +		}
> > +
> > +		err = tc358746_enable_csi_module(tc358746, 1);
> > +		if (err) {
> > +			pm_runtime_mark_last_busy(sd->dev);
> > +			pm_runtime_put_sync_autosuspend(sd->dev);
> > +			return err;
> > +		}
> > +
> > +		err = tc358746_enable_parallel_port(tc358746, 1);
> > +		if (err) {
> > +			pm_runtime_mark_last_busy(sd->dev);
> > +			pm_runtime_put_sync_autosuspend(sd->dev);
> > +			return err;
> > +		}
> > +
> > +		err = v4l2_subdev_call(src, video, s_stream, 1);
> > +		if (err) {
> > +			pm_runtime_mark_last_busy(sd->dev);
> > +			pm_runtime_put_sync_autosuspend(sd->dev);
> > +		}
> > +
> > +		return err;
> > +	}
> > +
> > +	/*
> > +	 * Lane disable trigger state change from LP-11 to LP-00
> > +	 * therefore it must happen before the CSI modile is disabled.
> > +	 */
> > +	err = tc358746_enable_csi_lanes(tc358746, 0);
> > +	if (err)
> > +		return err;
> > +
> > +	err = tc358746_enable_csi_module(tc358746, 0);
> > +	if (err)
> > +		return err;
> > +
> > +	err = tc358746_enable_parallel_port(tc358746, 0);
> > +	if (err)
> > +		return err;
> > +
> > +	pm_runtime_mark_last_busy(sd->dev);
> > +	pm_runtime_put_sync_autosuspend(sd->dev);
> > +
> > +	return v4l2_subdev_call(src, video, s_stream, 0);
> > +}
> > +
> > +static int tc358746_enum_mbus_code(struct v4l2_subdev *sd,
> > +				   struct v4l2_subdev_state *sd_state,
> > +				   struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > +	const struct tc358746_format *fmt;
> > +
> > +	fmt = tc358746_get_format_by_idx(code->pad, code->index);
> > +	if (IS_ERR(fmt))
> > +		return PTR_ERR(fmt);
> > +
> > +	code->code = fmt->code;
> > +
> > +	return 0;
> > +}
> > +
> > +static struct v4l2_mbus_framefmt *
> > +__tc358746_get_pad_format(struct v4l2_subdev *sd,
> > +			  struct v4l2_subdev_state *sd_state,
> > +			  unsigned int pad, u32 which)
> > +{
> > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > +	switch (which) {
> > +	case V4L2_SUBDEV_FORMAT_TRY:
> > +		return v4l2_subdev_get_try_format(sd, sd_state, pad);
> > +	case V4L2_SUBDEV_FORMAT_ACTIVE:
> > +		return &tc358746->mbusfmt;
> > +	default:
> > +		return NULL;
> > +	}
> > +}
> > +
> > +static int tc358746_get_fmt(struct v4l2_subdev *sd,
> > +			    struct v4l2_subdev_state *sd_state,
> > +			    struct v4l2_subdev_format *format)
> > +{
> > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > +	if (format->pad >= TC358746_NR_PADS)
> > +		return -EINVAL;
> > +
> > +	format->format = tc358746->mbusfmt;
> > +	if (format->pad == TC358746_SOURCE)
> > +		format->format.code = tc358746_src_mbus_code(tc358746->mbusfmt.code);
> > +
> > +	return 0;
> > +}
> > +
> > +static int tc358746_set_fmt(struct v4l2_subdev *sd,
> > +			    struct v4l2_subdev_state *sd_state,
> > +			    struct v4l2_subdev_format *format)
> > +{
> > +	struct v4l2_mbus_framefmt *mbusformat;
> > +	const struct tc358746_format *fmt;
> > +
> > +	if (format->pad >= TC358746_NR_PADS)
> > +		return -EINVAL;
> > +
> > +	/* The src follows the properties from the sink */
> > +	if (format->pad == TC358746_SOURCE)
> > +		return tc358746_get_fmt(sd, sd_state, format);
> > +
> > +	mbusformat = __tc358746_get_pad_format(sd, sd_state, format->pad,
> > +					       format->which);
> > +	if (!mbusformat)
> > +		return -EINVAL;
> > +
> > +	fmt = tc358746_get_format_by_code(format->pad, format->format.code);
> > +	if (IS_ERR(fmt))
> > +		fmt = tc358746_get_format_by_code(format->pad, tc358746_def_fmt.code);
> > +
> > +	format->format.code = fmt->code;
> > +	format->format.field = V4L2_FIELD_NONE;
> > +
> > +	dev_dbg(sd->dev, "Update format: %ux%u code:0x%x -> %ux%u code:0x%x",
> > +		mbusformat->width, mbusformat->height, mbusformat->code,
> > +		format->format.width, format->format.height, format->format.code);
> > +
> > +	*mbusformat = format->format;
> > +
> > +	return 0;
> > +}
> > +
> > +static unsigned long tc358746_find_pll_settings(struct tc358746 *tc358746,
> > +						unsigned long refclk,
> > +						unsigned long fout)
> > +
> > +{
> > +	struct device *dev = tc358746->sd.dev;
> > +	unsigned long best_freq = 0;
> > +	u32 min_delta = 0xffffffff;
> > +	u16 prediv_max = 17;
> > +	u16 prediv_min = 1;
> > +	u16 m_best, mul;
> > +	u16 p_best, p;
> > +	u8 postdiv;
> > +
> > +	if (fout > 1000 * MHZ) {
> > +		dev_err(dev, "HS-Clock above 1 Ghz are not supported\n");
> > +		return 0;
> > +	} else if (fout >= 500 * MHZ)
> > +		postdiv = 1;
> > +	else if (fout >= 250 * MHZ)
> > +		postdiv = 2;
> > +	else if (fout >= 125 * MHZ)
> > +		postdiv = 4;
> > +	else
> > +		postdiv = 8;
> > +
> > +	for (p = prediv_min; p <= prediv_max; p++) {
> > +		unsigned long delta, fin;
> > +		u64 tmp;
> > +
> > +		fin = DIV_ROUND_CLOSEST(refclk, p);
> > +		if (fin < 4 * MHZ || fin > 40 * MHZ)
> > +			continue;
> > +
> > +		tmp = fout * p * postdiv;
> > +		do_div(tmp, fin);
> > +		mul = tmp;
> > +		if (mul > 511)
> > +			continue;
> > +
> > +		tmp = mul * fin;
> > +		do_div(tmp, p * postdiv);
> > +
> > +		delta = abs(fout - tmp);
> > +		if (delta < min_delta) {
> > +			p_best = p;
> > +			m_best = mul;
> > +			min_delta = delta;
> > +			best_freq = tmp;
> > +		};
> > +
> > +		if (delta == 0)
> > +			break;
> > +	};
> > +
> > +	if (!best_freq) {
> > +		dev_err(dev, "Failed find PLL frequency\n");
> > +		return 0;
> > +	}
> > +
> > +	tc358746->pll_post_div = postdiv;
> > +	tc358746->pll_pre_div = p_best;
> > +	tc358746->pll_mul = m_best;
> > +
> > +	if (best_freq != fout)
> > +		dev_warn(dev, "Request PLL freq:%lu, found PLL freq:%lu\n",
> > +			 fout, best_freq);
> > +
> > +	dev_dbg(dev, "Found PLL settings: freq:%lu prediv:%u multi:%u postdiv:%u\n",
> > +		best_freq, p_best, m_best, postdiv);
> > +
> > +	return best_freq;
> > +}
> > +
> > +#define TC358746_PRECISION 10
> > +
> > +static int
> > +tc358746_link_validate(struct v4l2_subdev *sd, struct media_link *link,
> > +		       struct v4l2_subdev_format *source_fmt,
> > +		       struct v4l2_subdev_format *sink_fmt)
> > +{
> > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > +	unsigned long csi_bitrate, sensor_bitrate;
> > +	const struct tc358746_format *fmt;
> > +	unsigned int fifo_sz, tmp, n;
> > +	s64 sensor_pclk_rate;
> > +
> > +	/* Check the FIFO settings */
> > +	fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
> > +	if (IS_ERR(fmt))
> > +		return PTR_ERR(fmt);
> > +
> > +	sensor_pclk_rate = v4l2_ctrl_g_ctrl_int64(tc358746->sensor_pclk_ctrl);
> > +	sensor_bitrate = sensor_pclk_rate * fmt->bus_width;
> > +
> > +	csi_bitrate = tc358746->dphy_cfg.lanes * tc358746->pll_rate;
> > +
> > +	dev_dbg(tc358746->sd.dev,
> > +		"Fifo settings params: sensor-bitrate:%lu csi-bitrate:%lu",
> > +		sensor_bitrate, csi_bitrate);
> > +
> > +	/* Avoid possible FIFO overflows */
> > +	if (csi_bitrate < sensor_bitrate) {
> > +		dev_err(sd->dev,
> > +			"Link validation failed csi-bitrate:%lu < sensor-bitrate:%lu\n",
> > +			csi_bitrate, sensor_bitrate);
> > +		return -EINVAL;
> > +	}
> > +
> > +	/* Best case */
> > +	if (csi_bitrate == sensor_bitrate) {
> > +		tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > +		goto out;
> > +	}
> > +
> > +	/*
> > +	 * Avoid possible FIFO underflow in case of
> > +	 * csi_bitrate > sensor_bitrate. For such case the chip has a internal
> > +	 * fifo which can be used to delay the line output.
> > +	 *
> > +	 * Fifo size calculation:
> > +	 *
> > +	 * fifo-sz, image-width - in bits
> > +	 * sbr                  - sensor_bitrate in bits/s
> > +	 * csir                 - csi_bitrate in bits/s
> > +	 *
> > +	 *                1             1      1
> > +	 * image-width * --- + fifo-sz --- >= ---- * image-width
> > +	 *               sbr           sbr    csir
> > +	 *
> > +	 * fifo-sz >= abs(sbr/csir * image-width - image-width)
> > +	 *                `-----´
> > +	 *                   n
> > +	 *
> > +	 */
> > +
> > +	sensor_bitrate /= TC358746_PRECISION;
> > +	n = csi_bitrate / sensor_bitrate;
> > +	tmp = (tc358746->mbusfmt.width * TC358746_PRECISION) / n;
> > +	fifo_sz = tc358746->mbusfmt.width - tmp;
> > +	fifo_sz *= fmt->bpp;
> > +	tc358746->vb_size = round_up(fifo_sz, 32);
> > +
> 
> Please also call v4l2_subdev_link_validate_default() here.

Did it in my internal prepared v2 ^^ I call it now at the very
beginning of this function.

> I wonder if the above calculation wouldn't be better performed in
> .s_stream() (or rather in a function being called by .s_stream()) when
> enabling streaming.

No I wouldn't shift that, since the link validation is in IMHO the
correct place to inform the user that the pipeline can't negotiate if
the fifo can't be configured correctly. Therefore I placed it here.

> > +out:
> > +	dev_dbg(tc358746->sd.dev,
> > +		"Found FIFO size[bits]:%u -> aligned to size[bits]:%u\n",
> > +		fifo_sz, tc358746->vb_size);
> > +
> > +	return tc358746->vb_size > TC358746_VB_MAX_SIZE ? -EINVAL : 0;
> > +}
> > +
> > +static int tc358746_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
> > +				    struct v4l2_mbus_config *config)
> > +{
> > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > +	if (pad != TC358746_SOURCE)
> > +		return -EINVAL;
> > +
> > +	config->type = V4L2_MBUS_CSI2_DPHY;
> > +	config->bus.mipi_csi2 = tc358746->csi_vep.bus.mipi_csi2;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tc358746_link_setup(struct media_entity *entity,
> > +			       const struct media_pad *local,
> > +			       const struct media_pad *remote, u32 flags)
> > +{
> > +	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> > +	struct v4l2_subdev *sensor_sd =
> > +		media_entity_to_v4l2_subdev(remote->entity);
> > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > +	struct device *dev = sd->dev;
> > +	struct v4l2_ctrl *ctrl;
> > +
> > +	/* no special requirements on source pads */
> > +	if (local->flags & MEDIA_PAD_FL_SOURCE)
> > +		return 0;
> > +
> > +	dev_dbg(dev, "link setup '%s':%d->'%s':%d[%d]",
> > +		remote->entity->name, remote->index, local->entity->name,
> > +		local->index, flags & MEDIA_LNK_FL_ENABLED);
> > +
> > +	/* Required for the fifo calculation */
> > +	ctrl = v4l2_ctrl_find(sensor_sd->ctrl_handler, V4L2_CID_PIXEL_RATE);
> > +	if (!ctrl) {
> > +		dev_err(dev, "Subdev [%s] must support V4L2_CID_PIXEL_RATE\n",
> > +			sensor_sd->name);
> > +		return -EINVAL;
> > +	}
> > +	tc358746->sensor_pclk_ctrl = ctrl;
> > +
> > +	return 0;
> > +}
> > +
> > +int __maybe_unused
> > +tc358746_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
> > +{
> > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > +	/* 32-bit registers starting from CLW_DPHYCONTTX */
> > +	reg->size = reg->reg < CLW_DPHYCONTTX_REG ? 2 : 4;
> > +
> > +	if (pm_runtime_resume_and_get(sd->dev)) {
> > +		dev_err(sd->dev, "Failed to resume the device\n");
> > +		return 0;
> > +	}
> > +
> > +	tc358746_read(tc358746, reg->reg, (u32 *)&reg->val);
> > +
> > +	pm_runtime_mark_last_busy(sd->dev);
> > +	pm_runtime_put_sync_autosuspend(sd->dev);
> > +
> > +	return 0;
> > +}
> > +
> > +int __maybe_unused
> > +tc358746_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
> > +{
> > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > +	if (pm_runtime_resume_and_get(sd->dev)) {
> > +		dev_err(sd->dev, "Failed to resume the device\n");
> > +		return 0;
> > +	}
> > +
> > +	tc358746_write(tc358746, (u32)reg->reg, (u32)reg->val);
> > +
> > +	pm_runtime_mark_last_busy(sd->dev);
> > +	pm_runtime_put_sync_autosuspend(sd->dev);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_core_ops tc358746_core_ops = {
> > +#ifdef CONFIG_VIDEO_ADV_DEBUG
> > +	.g_register = tc358746_g_register,
> > +	.s_register = tc358746_s_register,
> > +#endif
> 
> Have you found this to be useful ?

It's useful since the regmap usage, because some registers are 32bit
wide and some 16bit wide... Those functions abstract it and I can set
values :) which is not allowed by the regmap debug interface. So yes,
it's not that bad..

> > +};
> > +
> > +static const struct v4l2_subdev_video_ops tc358746_video_ops = {
> > +	.s_stream = tc358746_s_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops tc358746_pad_ops = {
> > +	.enum_mbus_code = tc358746_enum_mbus_code,
> > +	.set_fmt = tc358746_set_fmt,
> > +	.get_fmt = tc358746_get_fmt,
> > +	.link_validate = tc358746_link_validate,
> > +	.get_mbus_config = tc358746_get_mbus_config,
> > +};
> > +
> > +static const struct v4l2_subdev_ops tc358746_ops = {
> > +	.core = &tc358746_core_ops,
> > +	.video = &tc358746_video_ops,
> > +	.pad = &tc358746_pad_ops,
> > +};
> > +
> > +static const struct media_entity_operations tc358746_entity_ops = {
> > +	.get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
> > +	.link_setup = tc358746_link_setup,
> > +	.link_validate = v4l2_subdev_link_validate,
> > +};
> > +
> > +static int tc358746_mclk_enable(struct clk_hw *hw)
> > +{
> > +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > +	unsigned int div;
> > +	u32 val;
> > +	int err;
> > +
> > +	div = tc358746->mclk_postdiv / 2;
> > +	val = MCLK_HIGH(div - 1) | MCLK_LOW(div - 1);
> > +	dev_dbg(tc358746->sd.dev, "MCLKCTL: %u (0x%x)\n", val, val);
> > +	err = tc358746_write(tc358746, MCLKCTL_REG, val);
> > +	if (err)
> > +		return err;
> > +
> > +	if (tc358746->mclk_prediv == 8)
> > +		val = MCLKDIV(MCLKDIV_8);
> > +	else if (tc358746->mclk_prediv == 4)
> > +		val = MCLKDIV(MCLKDIV_4);
> > +	else
> > +		val = MCLKDIV(MCLKDIV_2);
> > +
> > +	dev_dbg(tc358746->sd.dev, "CLKCTL[MCLKDIV]: %u (0x%x)\n", val, val);
> > +	return tc358746_update_bits(tc358746, CLKCTL_REG, MCLKDIV_MASK, val);
> > +}
> > +
> > +static void tc358746_mclk_disable(struct clk_hw *hw)
> > +{
> > +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > +
> > +	tc358746_write(tc358746, MCLKCTL_REG, 0);
> > +}
> > +
> > +static long
> > +tc358746_find_mclk_settings(struct tc358746 *tc358746, unsigned long mclk_rate)
> > +{
> > +	unsigned long pll_rate = tc358746->pll_rate;
> > +	const unsigned char prediv[] = { 2, 4, 8 };
> > +	unsigned int mclk_prediv, mclk_postdiv;
> > +	struct device *dev = tc358746->sd.dev;
> > +	unsigned int postdiv, mclkdiv;
> > +	unsigned long best_mclk_rate;
> > +	unsigned int i;
> > +
> > +	/*
> > +	 *                          MCLK-Div
> > +	 *           -------------------´`---------------------
> > +	 *          ´                                          `
> > +	 *         +-------------+     +------------------------+
> > +	 *         | MCLK-PreDiv |     |       MCLK-PostDiv     |
> > +	 * PLL --> |   (2/4/8)   | --> | (mclk_low + mclk_high) | --> MCLK
> > +	 *         +-------------+     +------------------------+
> > +	 *
> > +	 * The register value of mclk_low/high is mclk_low/high+1, i.e.:
> > +	 *   mclk_low/high = 1   --> 2 MCLK-Ref Counts
> > +	 *   mclk_low/high = 255 --> 256 MCLK-Ref Counts == max.
> > +	 * If mclk_low and mclk_high are 0 then MCLK is disabled.
> > +	 *
> > +	 * Keep it simple and support 50/50 duty cycles only for now,
> > +	 * so the calc will be:
> > +	 *
> > +	 *   MCLK = PLL / (MCLK-PreDiv * 2 * MCLK-PostDiv)
> > +	 */
> > +
> > +	if (mclk_rate == tc358746->mclk_rate)
> > +		return mclk_rate;
> > +
> > +	/* Highest possible rate */
> > +	mclkdiv = pll_rate / mclk_rate;
> > +	if (mclkdiv <= 8) {
> > +		mclk_prediv = 2;
> > +		mclk_postdiv = 4;
> > +		best_mclk_rate = pll_rate / (2 * 4);
> > +		goto out;
> > +	}
> > +
> > +	/* First check the prediv */
> > +	for (i = 0; i < ARRAY_SIZE(prediv); i++) {
> > +		postdiv = mclkdiv / prediv[i];
> > +
> > +		if (postdiv % 2)
> > +			continue;
> > +
> > +		if (postdiv >= 4 && postdiv <= 512) {
> > +			mclk_prediv = prediv[i];
> > +			mclk_postdiv = postdiv;
> > +			best_mclk_rate = pll_rate / (prediv[i] * postdiv);
> > +			goto out;
> > +		}
> > +	}
> > +
> > +	/* No suitable prediv found, so try to adjust the postdiv */
> > +	for (postdiv = 4; postdiv <= 512; postdiv += 2) {
> > +		unsigned int pre;
> > +
> > +		pre = mclkdiv / postdiv;
> > +		if (pre == 2 || pre == 4 || pre == 8) {
> > +			mclk_prediv = pre;
> > +			mclk_postdiv = postdiv;
> > +			best_mclk_rate = pll_rate / (pre * postdiv);
> > +			goto out;
> > +		}
> > +	}
> > +
> > +	/* The MCLK <-> PLL gap is to high -> use largest possible div */
> > +	mclk_prediv = 8;
> > +	mclk_postdiv = 512;
> > +	best_mclk_rate = pll_rate / (8 * 512);
> > +
> > +out:
> > +	tc358746->mclk_prediv = mclk_prediv;
> > +	tc358746->mclk_postdiv = mclk_postdiv;
> > +	tc358746->mclk_rate = best_mclk_rate;
> > +
> > +	if (best_mclk_rate != mclk_rate)
> > +		dev_warn(dev, "Request MCLK freq:%lu, found MCLK freq:%lu\n",
> > +			 mclk_rate, best_mclk_rate);
> > +
> > +	dev_dbg(dev, "Found MCLK settings: freq:%lu prediv:%u postdiv:%u\n",
> > +		best_mclk_rate, mclk_prediv, mclk_postdiv);
> > +
> > +	return best_mclk_rate;
> > +}
> > +
> > +unsigned long tc358746_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> > +{
> > +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > +	unsigned int prediv, postdiv;
> > +	u32 val;
> > +	int err;
> > +
> > +	err = tc358746_read(tc358746, MCLKCTL_REG, &val);
> > +	if (err)
> > +		return 0;
> > +
> > +	postdiv = FIELD_GET(MCLK_LOW_MASK, val) + 1;
> > +	postdiv += FIELD_GET(MCLK_HIGH_MASK, val) + 1;
> > +
> > +	err = tc358746_read(tc358746, CLKCTL_REG, &val);
> > +	if (err)
> > +		return 0;
> > +
> > +	prediv = FIELD_GET(MCLKDIV_MASK, val);
> > +	if (prediv == MCLKDIV_8)
> > +		prediv = 8;
> > +	else if (prediv == MCLKDIV_4)
> > +		prediv = 4;
> > +	else
> > +		prediv = 2;
> > +
> > +	return tc358746->pll_rate / (prediv * postdiv);
> > +}
> > +
> > +static long tc358746_mclk_round_rate(struct clk_hw *hw, unsigned long rate,
> > +				     unsigned long *parent_rate)
> > +{
> > +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > +
> > +	*parent_rate = tc358746->pll_rate;
> > +
> > +	return tc358746_find_mclk_settings(tc358746, rate);
> > +}
> > +
> > +static int tc358746_mclk_set_rate(struct clk_hw *hw, unsigned long rate,
> > +				  unsigned long parent_rate)
> > +{
> > +	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > +
> > +	tc358746_find_mclk_settings(tc358746, rate);
> > +
> > +	return tc358746_mclk_enable(hw);
> > +}
> > +
> > +static const struct clk_ops tc358746_mclk_ops = {
> > +	.enable = tc358746_mclk_enable,
> > +	.disable = tc358746_mclk_disable,
> > +	.recalc_rate = tc358746_recalc_rate,
> > +	.round_rate = tc358746_mclk_round_rate,
> > +	.set_rate = tc358746_mclk_set_rate,
> > +};
> > +
> > +static int tc358746_notify_bound(struct v4l2_async_notifier *notifier,
> > +				 struct v4l2_subdev *sd,
> > +				 struct v4l2_async_subdev *asd)
> > +{
> > +	struct tc358746 *tc358746 =
> > +		container_of(notifier, struct tc358746, notifier);
> > +	struct media_pad *sink = &tc358746->pads[TC358746_SINK];
> > +
> > +	return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED);
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations tc358746_notify_ops = {
> > +	.bound = tc358746_notify_bound,
> > +};
> > +
> > +static int tc358746_async_register(struct tc358746 *tc358746)
> > +{
> > +	struct v4l2_fwnode_endpoint vep = {
> > +		.bus_type = V4L2_MBUS_PARALLEL,
> > +	};
> > +	struct v4l2_async_subdev *asd;
> > +	struct fwnode_handle *ep;
> > +	int err;
> > +
> > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(tc358746->sd.dev),
> > +					     TC358746_SINK, 0, 0);
> > +	if (!ep)
> > +		return -ENOTCONN;
> > +
> > +	err = v4l2_fwnode_endpoint_parse(ep, &vep);
> > +	if (err) {
> > +		fwnode_handle_put(ep);
> > +		return err;
> > +	}
> > +
> > +	v4l2_async_nf_init(&tc358746->notifier);
> > +	asd = v4l2_async_nf_add_fwnode_remote(&tc358746->notifier, ep,
> > +					      struct v4l2_async_subdev);
> > +	if (IS_ERR(asd)) {
> > +		fwnode_handle_put(ep);
> > +		return PTR_ERR(asd);
> > +	}
> > +
> > +	fwnode_handle_put(ep);
> > +
> > +	tc358746->notifier.ops = &tc358746_notify_ops;
> > +
> > +	err = v4l2_async_subdev_nf_register(&tc358746->sd, &tc358746->notifier);
> > +	if (err) {
> > +		v4l2_async_nf_cleanup(&tc358746->notifier);
> > +		return err;
> > +	}
> > +
> > +	tc358746->sd.fwnode = fwnode_graph_get_endpoint_by_id(
> > +		dev_fwnode(tc358746->sd.dev), TC358746_SOURCE, 0, 0);
> > +
> > +	err = v4l2_async_register_subdev(&tc358746->sd);
> > +	if (err) {
> > +		v4l2_async_nf_unregister(&tc358746->notifier);
> > +		v4l2_async_nf_cleanup(&tc358746->notifier);
> > +	}
> > +
> > +	return err;
> > +}
> > +
> > +static int tc358746_probe(struct i2c_client *client)
> > +{
> > +	struct clk_init_data mclk_initdata = { };
> > +	struct device *dev = &client->dev;
> > +	struct v4l2_fwnode_endpoint *vep;
> > +	unsigned long csi_link_rate;
> > +	struct tc358746 *tc358746;
> > +	struct fwnode_handle *ep;
> > +	unsigned char csi_lanes;
> > +	struct v4l2_subdev *sd;
> > +	struct v4l2_ctrl *ctrl;
> > +	unsigned long refclk;
> > +	unsigned int i;
> > +	int err;
> > +	u32 val;
> > +
> > +	tc358746 = devm_kzalloc(&client->dev, sizeof(*tc358746), GFP_KERNEL);
> > +	if (!tc358746)
> > +		return -ENOMEM;
> > +
> > +	tc358746->regmap = devm_regmap_init_i2c(client, &tc358746_regmap_config);
> > +	if (IS_ERR(tc358746->regmap))
> > +		return dev_err_probe(dev, PTR_ERR(tc358746->regmap),
> > +				     "Failed to init regmap\n");
> > +
> > +	tc358746->refclk = devm_clk_get(dev, "refclk");
> > +	if (IS_ERR(tc358746->refclk))
> > +		return dev_err_probe(dev, PTR_ERR(tc358746->refclk),
> > +				     "Failed to get refclk\n");
> > +
> > +	err = clk_prepare_enable(tc358746->refclk);
> > +	if (err)
> > +		return dev_err_probe(dev, err,
> > +				     "Failed to enable refclk\n");
> > +
> > +	refclk = clk_get_rate(tc358746->refclk);
> > +	clk_disable_unprepare(tc358746->refclk);
> > +
> > +	if (refclk < 6 * MHZ || refclk > 40 * MHZ)
> > +		return dev_err_probe(dev, -EINVAL, "Invalid refclk range\n");
> > +
> > +	for (i = 0; i < ARRAY_SIZE(tc358746_supplies); i++)
> > +		tc358746->supplies[i].supply = tc358746_supplies[i];
> > +
> > +	err = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc358746_supplies),
> > +				      tc358746->supplies);
> > +	if (err)
> > +		return dev_err_probe(dev, err, "Failed to get supplies\n");
> > +
> > +	tc358746->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> > +						       GPIOD_OUT_HIGH);
> > +	if (IS_ERR(tc358746->reset_gpio))
> > +		return dev_err_probe(dev, PTR_ERR(tc358746->reset_gpio),
> > +				     "Failed to get reset-gpios\n");
> > +
> > +	sd = &tc358746->sd;
> > +	v4l2_i2c_subdev_init(sd, client, &tc358746_ops);
> > +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> > +	sd->entity.ops = &tc358746_entity_ops;
> > +
> > +	tc358746->pads[TC358746_SINK].flags = MEDIA_PAD_FL_SINK;
> > +	tc358746->pads[TC358746_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> > +	err = media_entity_pads_init(&sd->entity, TC358746_NR_PADS,
> > +				     tc358746->pads);
> > +	if (err)
> > +		return dev_err_probe(dev, err,
> > +				     "Failed to setup media-entity pads\n");
> > +
> > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), TC358746_SOURCE,
> > +					     0, 0);
> > +	if (!ep) {
> > +		dev_err(dev, "Missing endpoint node\n");
> > +		err = -EINVAL;
> > +		goto err_mc;
> > +	}
> > +
> > +	/* Currently we only support 'parallel in' -> 'csi out' */
> > +	vep = &tc358746->csi_vep;
> > +	vep->bus_type = V4L2_MBUS_CSI2_DPHY;
> > +	err = v4l2_fwnode_endpoint_alloc_parse(ep, vep);
> > +	fwnode_handle_put(ep);
> > +	if (err) {
> > +		dev_err(dev, "Failed to parse source endpoint\n");
> > +		goto err_mc;
> > +	}
> > +
> > +	csi_lanes = vep->bus.mipi_csi2.num_data_lanes;
> > +	if (csi_lanes == 0 || csi_lanes > 4 ||
> > +	    vep->nr_of_link_frequencies == 0) {
> > +		dev_err(dev, "error: Invalid CSI-2 settings\n");
> > +		err = -EINVAL;
> > +		goto err_vep;
> > +	}
> > +
> > +	/* TODO: Add support to handle multiple link frequencies */
> > +	csi_link_rate = (unsigned long)vep->link_frequencies[0];
> > +	tc358746->pll_rate = tc358746_find_pll_settings(tc358746, refclk,
> > +							csi_link_rate * 2);
> > +	if (!tc358746->pll_rate) {
> > +		err = -EINVAL;
> > +		goto err_vep;
> > +	}
> > +
> > +	err = phy_mipi_dphy_get_default_config_for_hsclk(tc358746->pll_rate,
> > +							 csi_lanes,
> > +							 &tc358746->dphy_cfg);
> > +	if (err)
> > +		goto err_vep;
> > +
> > +	tc358746->mbusfmt = tc358746_def_fmt;
> > +	tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > +
> > +	dev_set_drvdata(dev, tc358746);
> > +	pm_runtime_set_autosuspend_delay(dev, 200);
> > +	pm_runtime_use_autosuspend(dev);
> > +	pm_runtime_enable(dev);
> > +
> > +	err = pm_runtime_resume_and_get(dev);
> > +	if (err < 0) {
> > +		dev_err(dev, "Failed to resume the device\n");
> > +		goto err_vep;
> > +	}
> > +
> > +	 /* Ensure that CSI interface is put into LP-11 state */
> > +	err = tc358746_sw_reset(tc358746);
> > +	if (err) {
> > +		pm_runtime_put_noidle(dev);
> > +		dev_err(dev, "Failed to reset the device\n");
> > +		goto err_pm;
> > +	}
> > +
> > +	err = tc358746_read(tc358746, CHIPID_REG, &val);
> > +	pm_runtime_mark_last_busy(dev);
> > +	pm_runtime_put_sync_autosuspend(dev);
> > +	if (err) {
> > +		dev_err(dev, "Failed to read chipid\n");
> > +		err = -ENODEV;
> > +		goto err_pm;
> > +	}
> > +
> > +	if (FIELD_GET(CHIPID, val) != 0x44) {
> > +		dev_err(dev, "Invalid chipid 0x%02x\n",
> > +			(u32)FIELD_GET(CHIPID, val));
> > +		err = -ENODEV;
> > +		goto err_pm;
> > +	}
> > +
> > +	/* Optional MCLK provider support */
> > +	if (device_property_present(dev, "#clock-cells")) {
> > +		const char *mclk_name;
> > +
> > +		/* Init to highest possibel MCLK */
> > +		tc358746->mclk_postdiv = 512;
> > +		tc358746->mclk_prediv = 8;
> > +
> > +		mclk_name = "tc358746-mclk";
> > +		device_property_read_string(dev, "clock-output-names",
> > +					    &mclk_name);
> > +
> > +		mclk_initdata.name = mclk_name;
> > +		mclk_initdata.ops = &tc358746_mclk_ops;
> > +		tc358746->mclk_hw.init = &mclk_initdata;
> > +
> > +		err = devm_clk_hw_register(dev, &tc358746->mclk_hw);
> > +		if (err) {
> > +			dev_err(dev, "Failed to register mclk provider\n");
> > +			goto err_pm;
> > +		}
> > +
> > +		err = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> > +						  &tc358746->mclk_hw);
> > +		if (err) {
> > +			dev_err(dev, "Failed to add mclk provider\n");
> > +			goto err_pm;
> > +		}
> > +	}
> > +
> > +	v4l2_ctrl_handler_init(&tc358746->ctrl_hdl, 1);
> > +
> > +	ctrl = v4l2_ctrl_new_int_menu(&tc358746->ctrl_hdl, NULL,
> > +				      V4L2_CID_LINK_FREQ, 0, 0,
> > +				      vep->link_frequencies);
> > +	if (ctrl)
> > +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > +	tc358746->sd.ctrl_handler = &tc358746->ctrl_hdl;
> > +	if (tc358746->ctrl_hdl.error) {
> > +		err = tc358746->ctrl_hdl.error;
> > +		goto err_pm;
> > +	}
> > +
> > +	v4l2_ctrl_handler_setup(&tc358746->ctrl_hdl);
> > +
> > +	err = tc358746_async_register(tc358746);
> > +	if (err < 0)
> > +		goto err_ctrl;
> > +
> > +	dev_info(dev, "%s found @ 0x%x (%s)\n", client->name,
> > +		  client->addr, client->adapter->name);
> 
> I'd skip this to avoid adding noise to the kernel log at boot time. I
> would also probably split some of the code out of the probe function as
> it's fairly large. Up to you.

Yes it is large but most of it is just requesting stuff and so..
Therefore I kept it here since I don't need it elsewhere. What about
setting it to dev_dbg()? Sometimes it can be useful e.g. to find the
problem why /dev/media is not comming up..

> > +
> > +	return 0;
> > +
> > +err_ctrl:
> > +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > +err_pm:
> > +	pm_runtime_disable(dev);
> > +	pm_runtime_set_suspended(dev);
> > +	pm_runtime_dont_use_autosuspend(dev);
> > +err_vep:
> > +	v4l2_fwnode_endpoint_free(vep);
> > +err_mc:
> > +	media_entity_cleanup(&sd->entity);
> > +
> > +	return err;
> > +}
> > +
> > +static int tc358746_remove(struct i2c_client *client)
> > +{
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > +	v4l2_fwnode_endpoint_free(&tc358746->csi_vep);
> > +	v4l2_async_nf_unregister(&tc358746->notifier);
> > +	v4l2_async_nf_cleanup(&tc358746->notifier);
> > +	v4l2_async_unregister_subdev(sd);
> > +	v4l2_device_unregister_subdev(sd);
> 
> This shouldn't be needed v4l2_async_unregister_subdev() should be
> enough.

Okay, thanks. There are a lot of unregister helpers in the v4l2 space..

> 
> > +	media_entity_cleanup(&sd->entity);
> > +
> > +	pm_runtime_disable(sd->dev);
> > +	pm_runtime_set_suspended(sd->dev);
> > +	pm_runtime_dont_use_autosuspend(sd->dev);
> > +
> > +	return 0;
> > +}
> > +
> > +static int tc358746_suspend(struct device *dev)
> > +{
> > +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > +
> > +	clk_disable_unprepare(tc358746->refclk);
> > +
> > +	return regulator_bulk_disable(ARRAY_SIZE(tc358746_supplies),
> > +				      tc358746->supplies);
> 
> Shouldn't you reenable the clock if this fails ?

Hm.. if this fails I could end in a undefined chip state. But I got the
point that the framework would be in a bad state if it tries again to
suspend the device.

> > +}
> > +
> > +static int tc358746_resume(struct device *dev)
> > +{
> > +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > +	int err;
> > +
> > +	gpiod_set_value(tc358746->reset_gpio, 1);
> > +
> > +	err = regulator_bulk_enable(ARRAY_SIZE(tc358746_supplies),
> > +				    tc358746->supplies);
> > +	if (err)
> > +		return err;
> > +
> > +	/* min. 200ns */
> > +	usleep_range(10, 20);
> > +
> > +	gpiod_set_value(tc358746->reset_gpio, 0);
> > +
> > +	err = clk_prepare_enable(tc358746->refclk);
> > +	if (err)
> > +		return err;
> 
> The regulators need to be disabled in case of failure here and below
> (and so does the clock below).

Yes, you're right.

> > +
> > +	/* min. 700us ... 1ms */
> > +	usleep_range(1000, 1500);
> > +
> > +	/* Sync state */
> > +	err = tc358746_apply_pll_config(tc358746);
> > +	if (err)
> > +		return err;
> > +
> > +	err = tc358746_apply_dphy_config(tc358746);
> > +	if (err)
> > +		return err;
> > +
> > +	return tc358746_apply_misc_config(tc358746);
> 
> Does all this belong to the PM resume handler ? It seems configuration
> could be handled in .s_stream() instead.

This gets called by the s_stream() during getting the power state but I
can move the dphy/misc_config to the .s_stream() of course. The pll
needs to be there since the device can be a clock provider e.g. for the
sensor.

Thanks for the review :)

Regards,
  Marco

> > +}
> > +
> > +DEFINE_RUNTIME_DEV_PM_OPS(tc358746_pm_ops, tc358746_suspend,
> > +			  tc358746_resume, NULL);
> > +
> > +static const struct of_device_id __maybe_unused tc358746_of_match[] = {
> > +	{ .compatible = "toshiba,tc358746" },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(of, tc358746_of_match);
> > +
> > +static struct i2c_driver tc358746_driver = {
> > +	.driver = {
> > +		.name = "tc358746",
> > +		.pm = pm_ptr(&tc358746_pm_ops),
> > +		.of_match_table = tc358746_of_match,
> > +	},
> > +	.probe_new = tc358746_probe,
> > +	.remove = tc358746_remove,
> > +};
> > +
> > +module_i2c_driver(tc358746_driver);
> > +
> > +MODULE_DESCRIPTION("Toshiba TC358746 Parallel to CSI-2 bridge driver");
> > +MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
> > +MODULE_LICENSE("GPL");
> 
> -- 
> Regards,
> 
> Laurent Pinchart
>
Laurent Pinchart Sept. 16, 2022, 2:33 p.m. UTC | #3
Hi Marco,

On Thu, Sep 15, 2022 at 06:54:04PM +0200, Marco Felsch wrote:
> On 22-09-05, Laurent Pinchart wrote:
> > On Thu, Aug 18, 2022 at 04:33:07PM +0200, Marco Felsch wrote:
> > > Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
> > > supports two operating modes:
> > >   1st) parallel-in -> mipi-csi out
> > >   2nd) mipi-csi in -> parallel out
> > > 
> > > This patch only adds the support for the 1st mode.
> > > 
> > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > > ---
> > >  drivers/media/i2c/Kconfig    |   17 +
> > >  drivers/media/i2c/Makefile   |    1 +
> > >  drivers/media/i2c/tc358746.c | 1645 ++++++++++++++++++++++++++++++++++
> > >  3 files changed, 1663 insertions(+)
> > >  create mode 100644 drivers/media/i2c/tc358746.c

[snip]

> > > diff --git a/drivers/media/i2c/tc358746.c b/drivers/media/i2c/tc358746.c
> > > new file mode 100644
> > > index 000000000000..7b71d0cf72a9
> > > --- /dev/null
> > > +++ b/drivers/media/i2c/tc358746.c

[snip]

> > > +struct tc358746 {
> > > +	struct v4l2_subdev		sd;
> > > +	struct media_pad		pads[TC358746_NR_PADS];
> > > +	struct v4l2_async_notifier	notifier;
> > > +	struct v4l2_mbus_framefmt	mbusfmt;
> > 
> > Could you use the active state API instead of manually storing mbusfmt
> > here ? It involves
> 
> I will do that, thanks for the hint and it also elimates a few basic
> checks like the pad-num check.

Even nicer :-)

> > - Implementing the .init_cfg() operation
> > - Calling v4l2_subdev_init_finalize() in probe
> > - Replacing calls to __tc358746_get_pad_format() with
> >   v4l2_subdev_get_pad_format()
> > - Propagating the format from sink to source in tc358746_set_fmt()
> > - Dropping tc358746_src_mbus_code() from tc358746_get_fmt() and simply
> >   retrieving the format using v4l2_subdev_get_pad_format() there
> > - Dropping this field
> > 
> > The formats for both the ACTIVE and TRY states will then be stored in
> > the subdev state, unconditionally. You can retrieve the active state
> > with v4l2_subdev_get_locked_active_state() in tc358746_s_stream().
> > 
> > > +	struct v4l2_fwnode_endpoint	csi_vep;
> > > +
> > > +	struct v4l2_ctrl_handler	ctrl_hdl;
> > > +
> > > +	struct regmap			*regmap;
> > > +	struct clk			*refclk;
> > > +	struct gpio_desc		*reset_gpio;
> > > +	struct regulator_bulk_data	supplies[ARRAY_SIZE(tc358746_supplies)];
> > > +
> > > +	struct clk_hw			mclk_hw;
> > > +	unsigned long			mclk_rate;
> > > +	u8				mclk_prediv;
> > > +	u16				mclk_postdiv;
> > > +
> > > +	unsigned long			pll_rate;
> > > +	u8				pll_post_div;
> > > +	u16				pll_pre_div;
> > > +	u16				pll_mul;
> > > +
> > > +	struct v4l2_ctrl		*sensor_pclk_ctrl;
> > > +
> > > +#define TC358746_VB_MAX_SIZE		(511 * 32)
> > > +#define TC358746_VB_DEFAULT_SIZE	  (1 * 32)
> > > +	unsigned int			vb_size; /* Video buffer size in bits */
> > > +
> > > +	struct phy_configure_opts_mipi_dphy dphy_cfg;
> > > +};

[snip]

> > > +#ifndef MHZ
> > 
> > Where would it be previously defined ? This sounds like asking for
> > trouble later.
> 
> Sorry I don't get that, do you mean that I should define it at the very
> beginning?

I mean that either MHZ is defined somewhere in the kernel already, in
case we should include the corresponding header, or it's not, and I
wouldn't add an #ifndev here. Otherwise, if someone adds a MHZ macro
later that gets pulled in through one of the kernel headers used by the
driver, it may cause subtle bugs if the definition is different. Of
course nobody will

#define MHZ		42

but we could get

#define MHZ		1000 * 1000

and something could break here. I'd drop the #ifndef to get the compiler
to complain if there's a redefinition.

> > > +#define MHZ		(1000 * 1000)
> > > +#endif

[snip]

> > > +static int
> > > +tc358746_link_validate(struct v4l2_subdev *sd, struct media_link *link,
> > > +		       struct v4l2_subdev_format *source_fmt,
> > > +		       struct v4l2_subdev_format *sink_fmt)
> > > +{
> > > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > > +	unsigned long csi_bitrate, sensor_bitrate;
> > > +	const struct tc358746_format *fmt;
> > > +	unsigned int fifo_sz, tmp, n;
> > > +	s64 sensor_pclk_rate;
> > > +
> > > +	/* Check the FIFO settings */
> > > +	fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
> > > +	if (IS_ERR(fmt))
> > > +		return PTR_ERR(fmt);
> > > +
> > > +	sensor_pclk_rate = v4l2_ctrl_g_ctrl_int64(tc358746->sensor_pclk_ctrl);
> > > +	sensor_bitrate = sensor_pclk_rate * fmt->bus_width;
> > > +
> > > +	csi_bitrate = tc358746->dphy_cfg.lanes * tc358746->pll_rate;
> > > +
> > > +	dev_dbg(tc358746->sd.dev,
> > > +		"Fifo settings params: sensor-bitrate:%lu csi-bitrate:%lu",
> > > +		sensor_bitrate, csi_bitrate);
> > > +
> > > +	/* Avoid possible FIFO overflows */
> > > +	if (csi_bitrate < sensor_bitrate) {
> > > +		dev_err(sd->dev,
> > > +			"Link validation failed csi-bitrate:%lu < sensor-bitrate:%lu\n",
> > > +			csi_bitrate, sensor_bitrate);
> > > +		return -EINVAL;
> > > +	}
> > > +
> > > +	/* Best case */
> > > +	if (csi_bitrate == sensor_bitrate) {
> > > +		tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > > +		goto out;
> > > +	}
> > > +
> > > +	/*
> > > +	 * Avoid possible FIFO underflow in case of
> > > +	 * csi_bitrate > sensor_bitrate. For such case the chip has a internal
> > > +	 * fifo which can be used to delay the line output.
> > > +	 *
> > > +	 * Fifo size calculation:
> > > +	 *
> > > +	 * fifo-sz, image-width - in bits
> > > +	 * sbr                  - sensor_bitrate in bits/s
> > > +	 * csir                 - csi_bitrate in bits/s
> > > +	 *
> > > +	 *                1             1      1
> > > +	 * image-width * --- + fifo-sz --- >= ---- * image-width
> > > +	 *               sbr           sbr    csir
> > > +	 *
> > > +	 * fifo-sz >= abs(sbr/csir * image-width - image-width)
> > > +	 *                `-----´
> > > +	 *                   n
> > > +	 *
> > > +	 */
> > > +
> > > +	sensor_bitrate /= TC358746_PRECISION;
> > > +	n = csi_bitrate / sensor_bitrate;
> > > +	tmp = (tc358746->mbusfmt.width * TC358746_PRECISION) / n;
> > > +	fifo_sz = tc358746->mbusfmt.width - tmp;
> > > +	fifo_sz *= fmt->bpp;
> > > +	tc358746->vb_size = round_up(fifo_sz, 32);
> > > +
> > 
> > Please also call v4l2_subdev_link_validate_default() here.
> 
> Did it in my internal prepared v2 ^^ I call it now at the very
> beginning of this function.
> 
> > I wonder if the above calculation wouldn't be better performed in
> > .s_stream() (or rather in a function being called by .s_stream()) when
> > enabling streaming.
> 
> No I wouldn't shift that, since the link validation is in IMHO the
> correct place to inform the user that the pipeline can't negotiate if
> the fifo can't be configured correctly. Therefore I placed it here.

The issue is that the user could enable the link first, and then change
the V4L2_CID_LINK_FREQ of the sensor and push the pixel rate above what
the TC358746 can support. Given the model that configures subdevs
independently, you can only validate the pipeline at stream on time.

> > > +out:
> > > +	dev_dbg(tc358746->sd.dev,
> > > +		"Found FIFO size[bits]:%u -> aligned to size[bits]:%u\n",
> > > +		fifo_sz, tc358746->vb_size);
> > > +
> > > +	return tc358746->vb_size > TC358746_VB_MAX_SIZE ? -EINVAL : 0;
> > > +}

[snip]

> > > +static int tc358746_probe(struct i2c_client *client)
> > > +{
> > > +	struct clk_init_data mclk_initdata = { };
> > > +	struct device *dev = &client->dev;
> > > +	struct v4l2_fwnode_endpoint *vep;
> > > +	unsigned long csi_link_rate;
> > > +	struct tc358746 *tc358746;
> > > +	struct fwnode_handle *ep;
> > > +	unsigned char csi_lanes;
> > > +	struct v4l2_subdev *sd;
> > > +	struct v4l2_ctrl *ctrl;
> > > +	unsigned long refclk;
> > > +	unsigned int i;
> > > +	int err;
> > > +	u32 val;
> > > +
> > > +	tc358746 = devm_kzalloc(&client->dev, sizeof(*tc358746), GFP_KERNEL);
> > > +	if (!tc358746)
> > > +		return -ENOMEM;
> > > +
> > > +	tc358746->regmap = devm_regmap_init_i2c(client, &tc358746_regmap_config);
> > > +	if (IS_ERR(tc358746->regmap))
> > > +		return dev_err_probe(dev, PTR_ERR(tc358746->regmap),
> > > +				     "Failed to init regmap\n");
> > > +
> > > +	tc358746->refclk = devm_clk_get(dev, "refclk");
> > > +	if (IS_ERR(tc358746->refclk))
> > > +		return dev_err_probe(dev, PTR_ERR(tc358746->refclk),
> > > +				     "Failed to get refclk\n");
> > > +
> > > +	err = clk_prepare_enable(tc358746->refclk);
> > > +	if (err)
> > > +		return dev_err_probe(dev, err,
> > > +				     "Failed to enable refclk\n");
> > > +
> > > +	refclk = clk_get_rate(tc358746->refclk);
> > > +	clk_disable_unprepare(tc358746->refclk);
> > > +
> > > +	if (refclk < 6 * MHZ || refclk > 40 * MHZ)
> > > +		return dev_err_probe(dev, -EINVAL, "Invalid refclk range\n");
> > > +
> > > +	for (i = 0; i < ARRAY_SIZE(tc358746_supplies); i++)
> > > +		tc358746->supplies[i].supply = tc358746_supplies[i];
> > > +
> > > +	err = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc358746_supplies),
> > > +				      tc358746->supplies);
> > > +	if (err)
> > > +		return dev_err_probe(dev, err, "Failed to get supplies\n");
> > > +
> > > +	tc358746->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> > > +						       GPIOD_OUT_HIGH);
> > > +	if (IS_ERR(tc358746->reset_gpio))
> > > +		return dev_err_probe(dev, PTR_ERR(tc358746->reset_gpio),
> > > +				     "Failed to get reset-gpios\n");
> > > +
> > > +	sd = &tc358746->sd;
> > > +	v4l2_i2c_subdev_init(sd, client, &tc358746_ops);
> > > +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > > +	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> > > +	sd->entity.ops = &tc358746_entity_ops;
> > > +
> > > +	tc358746->pads[TC358746_SINK].flags = MEDIA_PAD_FL_SINK;
> > > +	tc358746->pads[TC358746_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> > > +	err = media_entity_pads_init(&sd->entity, TC358746_NR_PADS,
> > > +				     tc358746->pads);
> > > +	if (err)
> > > +		return dev_err_probe(dev, err,
> > > +				     "Failed to setup media-entity pads\n");
> > > +
> > > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), TC358746_SOURCE,
> > > +					     0, 0);
> > > +	if (!ep) {
> > > +		dev_err(dev, "Missing endpoint node\n");
> > > +		err = -EINVAL;
> > > +		goto err_mc;
> > > +	}
> > > +
> > > +	/* Currently we only support 'parallel in' -> 'csi out' */
> > > +	vep = &tc358746->csi_vep;
> > > +	vep->bus_type = V4L2_MBUS_CSI2_DPHY;
> > > +	err = v4l2_fwnode_endpoint_alloc_parse(ep, vep);
> > > +	fwnode_handle_put(ep);
> > > +	if (err) {
> > > +		dev_err(dev, "Failed to parse source endpoint\n");
> > > +		goto err_mc;
> > > +	}
> > > +
> > > +	csi_lanes = vep->bus.mipi_csi2.num_data_lanes;
> > > +	if (csi_lanes == 0 || csi_lanes > 4 ||
> > > +	    vep->nr_of_link_frequencies == 0) {
> > > +		dev_err(dev, "error: Invalid CSI-2 settings\n");
> > > +		err = -EINVAL;
> > > +		goto err_vep;
> > > +	}
> > > +
> > > +	/* TODO: Add support to handle multiple link frequencies */
> > > +	csi_link_rate = (unsigned long)vep->link_frequencies[0];
> > > +	tc358746->pll_rate = tc358746_find_pll_settings(tc358746, refclk,
> > > +							csi_link_rate * 2);
> > > +	if (!tc358746->pll_rate) {
> > > +		err = -EINVAL;
> > > +		goto err_vep;
> > > +	}
> > > +
> > > +	err = phy_mipi_dphy_get_default_config_for_hsclk(tc358746->pll_rate,
> > > +							 csi_lanes,
> > > +							 &tc358746->dphy_cfg);
> > > +	if (err)
> > > +		goto err_vep;
> > > +
> > > +	tc358746->mbusfmt = tc358746_def_fmt;
> > > +	tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > > +
> > > +	dev_set_drvdata(dev, tc358746);
> > > +	pm_runtime_set_autosuspend_delay(dev, 200);
> > > +	pm_runtime_use_autosuspend(dev);
> > > +	pm_runtime_enable(dev);
> > > +
> > > +	err = pm_runtime_resume_and_get(dev);
> > > +	if (err < 0) {
> > > +		dev_err(dev, "Failed to resume the device\n");
> > > +		goto err_vep;
> > > +	}
> > > +
> > > +	 /* Ensure that CSI interface is put into LP-11 state */
> > > +	err = tc358746_sw_reset(tc358746);
> > > +	if (err) {
> > > +		pm_runtime_put_noidle(dev);
> > > +		dev_err(dev, "Failed to reset the device\n");
> > > +		goto err_pm;
> > > +	}
> > > +
> > > +	err = tc358746_read(tc358746, CHIPID_REG, &val);
> > > +	pm_runtime_mark_last_busy(dev);
> > > +	pm_runtime_put_sync_autosuspend(dev);
> > > +	if (err) {
> > > +		dev_err(dev, "Failed to read chipid\n");
> > > +		err = -ENODEV;
> > > +		goto err_pm;
> > > +	}
> > > +
> > > +	if (FIELD_GET(CHIPID, val) != 0x44) {
> > > +		dev_err(dev, "Invalid chipid 0x%02x\n",
> > > +			(u32)FIELD_GET(CHIPID, val));
> > > +		err = -ENODEV;
> > > +		goto err_pm;
> > > +	}
> > > +
> > > +	/* Optional MCLK provider support */
> > > +	if (device_property_present(dev, "#clock-cells")) {
> > > +		const char *mclk_name;
> > > +
> > > +		/* Init to highest possibel MCLK */
> > > +		tc358746->mclk_postdiv = 512;
> > > +		tc358746->mclk_prediv = 8;
> > > +
> > > +		mclk_name = "tc358746-mclk";
> > > +		device_property_read_string(dev, "clock-output-names",
> > > +					    &mclk_name);
> > > +
> > > +		mclk_initdata.name = mclk_name;
> > > +		mclk_initdata.ops = &tc358746_mclk_ops;
> > > +		tc358746->mclk_hw.init = &mclk_initdata;
> > > +
> > > +		err = devm_clk_hw_register(dev, &tc358746->mclk_hw);
> > > +		if (err) {
> > > +			dev_err(dev, "Failed to register mclk provider\n");
> > > +			goto err_pm;
> > > +		}
> > > +
> > > +		err = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> > > +						  &tc358746->mclk_hw);
> > > +		if (err) {
> > > +			dev_err(dev, "Failed to add mclk provider\n");
> > > +			goto err_pm;
> > > +		}
> > > +	}
> > > +
> > > +	v4l2_ctrl_handler_init(&tc358746->ctrl_hdl, 1);
> > > +
> > > +	ctrl = v4l2_ctrl_new_int_menu(&tc358746->ctrl_hdl, NULL,
> > > +				      V4L2_CID_LINK_FREQ, 0, 0,
> > > +				      vep->link_frequencies);
> > > +	if (ctrl)
> > > +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > > +
> > > +	tc358746->sd.ctrl_handler = &tc358746->ctrl_hdl;
> > > +	if (tc358746->ctrl_hdl.error) {
> > > +		err = tc358746->ctrl_hdl.error;
> > > +		goto err_pm;
> > > +	}
> > > +
> > > +	v4l2_ctrl_handler_setup(&tc358746->ctrl_hdl);
> > > +
> > > +	err = tc358746_async_register(tc358746);
> > > +	if (err < 0)
> > > +		goto err_ctrl;
> > > +
> > > +	dev_info(dev, "%s found @ 0x%x (%s)\n", client->name,
> > > +		  client->addr, client->adapter->name);
> > 
> > I'd skip this to avoid adding noise to the kernel log at boot time. I
> > would also probably split some of the code out of the probe function as
> > it's fairly large. Up to you.
> 
> Yes it is large but most of it is just requesting stuff and so..
> Therefore I kept it here since I don't need it elsewhere. What about
> setting it to dev_dbg()? Sometimes it can be useful e.g. to find the
> problem why /dev/media is not comming up..

I find that enabling dev_dbg() messages from drivers/base/dd.c are
helpful for that, but a dev_dbg() message here is fine too.

> > > +
> > > +	return 0;
> > > +
> > > +err_ctrl:
> > > +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > > +err_pm:
> > > +	pm_runtime_disable(dev);
> > > +	pm_runtime_set_suspended(dev);
> > > +	pm_runtime_dont_use_autosuspend(dev);
> > > +err_vep:
> > > +	v4l2_fwnode_endpoint_free(vep);
> > > +err_mc:
> > > +	media_entity_cleanup(&sd->entity);
> > > +
> > > +	return err;
> > > +}
> > > +
> > > +static int tc358746_remove(struct i2c_client *client)
> > > +{
> > > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > > +
> > > +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > > +	v4l2_fwnode_endpoint_free(&tc358746->csi_vep);
> > > +	v4l2_async_nf_unregister(&tc358746->notifier);
> > > +	v4l2_async_nf_cleanup(&tc358746->notifier);
> > > +	v4l2_async_unregister_subdev(sd);
> > > +	v4l2_device_unregister_subdev(sd);
> > 
> > This shouldn't be needed v4l2_async_unregister_subdev() should be
> > enough.
> 
> Okay, thanks. There are a lot of unregister helpers in the v4l2 space..

Too many of them indeed. I'd like to simplify all that.

> > > +	media_entity_cleanup(&sd->entity);
> > > +
> > > +	pm_runtime_disable(sd->dev);
> > > +	pm_runtime_set_suspended(sd->dev);
> > > +	pm_runtime_dont_use_autosuspend(sd->dev);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int tc358746_suspend(struct device *dev)
> > > +{
> > > +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > > +
> > > +	clk_disable_unprepare(tc358746->refclk);
> > > +
> > > +	return regulator_bulk_disable(ARRAY_SIZE(tc358746_supplies),
> > > +				      tc358746->supplies);
> > 
> > Shouldn't you reenable the clock if this fails ?
> 
> Hm.. if this fails I could end in a undefined chip state. But I got the
> point that the framework would be in a bad state if it tries again to
> suspend the device.

It would be, and without a way to recover, so that could be an issue.

> > > +}
> > > +
> > > +static int tc358746_resume(struct device *dev)
> > > +{
> > > +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > > +	int err;
> > > +
> > > +	gpiod_set_value(tc358746->reset_gpio, 1);
> > > +
> > > +	err = regulator_bulk_enable(ARRAY_SIZE(tc358746_supplies),
> > > +				    tc358746->supplies);
> > > +	if (err)
> > > +		return err;
> > > +
> > > +	/* min. 200ns */
> > > +	usleep_range(10, 20);
> > > +
> > > +	gpiod_set_value(tc358746->reset_gpio, 0);
> > > +
> > > +	err = clk_prepare_enable(tc358746->refclk);
> > > +	if (err)
> > > +		return err;
> > 
> > The regulators need to be disabled in case of failure here and below
> > (and so does the clock below).
> 
> Yes, you're right.
> 
> > > +
> > > +	/* min. 700us ... 1ms */
> > > +	usleep_range(1000, 1500);
> > > +
> > > +	/* Sync state */
> > > +	err = tc358746_apply_pll_config(tc358746);
> > > +	if (err)
> > > +		return err;
> > > +
> > > +	err = tc358746_apply_dphy_config(tc358746);
> > > +	if (err)
> > > +		return err;
> > > +
> > > +	return tc358746_apply_misc_config(tc358746);
> > 
> > Does all this belong to the PM resume handler ? It seems configuration
> > could be handled in .s_stream() instead.
> 
> This gets called by the s_stream() during getting the power state but I
> can move the dphy/misc_config to the .s_stream() of course.

That would be nice, thanks.

> The pll
> needs to be there since the device can be a clock provider e.g. for the
> sensor.

OK.

> Thanks for the review :)
> 
> > > +}
> > > +
> > > +DEFINE_RUNTIME_DEV_PM_OPS(tc358746_pm_ops, tc358746_suspend,
> > > +			  tc358746_resume, NULL);
> > > +
> > > +static const struct of_device_id __maybe_unused tc358746_of_match[] = {
> > > +	{ .compatible = "toshiba,tc358746" },
> > > +	{ },
> > > +};
> > > +MODULE_DEVICE_TABLE(of, tc358746_of_match);
> > > +
> > > +static struct i2c_driver tc358746_driver = {
> > > +	.driver = {
> > > +		.name = "tc358746",
> > > +		.pm = pm_ptr(&tc358746_pm_ops),
> > > +		.of_match_table = tc358746_of_match,
> > > +	},
> > > +	.probe_new = tc358746_probe,
> > > +	.remove = tc358746_remove,
> > > +};
> > > +
> > > +module_i2c_driver(tc358746_driver);
> > > +
> > > +MODULE_DESCRIPTION("Toshiba TC358746 Parallel to CSI-2 bridge driver");
> > > +MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
> > > +MODULE_LICENSE("GPL");
Marco Felsch Sept. 19, 2022, 8:40 a.m. UTC | #4
Hi Laurent,

On 22-09-16, Laurent Pinchart wrote:
> Hi Marco,
> 
> On Thu, Sep 15, 2022 at 06:54:04PM +0200, Marco Felsch wrote:
> > On 22-09-05, Laurent Pinchart wrote:
> > > On Thu, Aug 18, 2022 at 04:33:07PM +0200, Marco Felsch wrote:
> > > > Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
> > > > supports two operating modes:
> > > >   1st) parallel-in -> mipi-csi out
> > > >   2nd) mipi-csi in -> parallel out
> > > > 
> > > > This patch only adds the support for the 1st mode.
> > > > 
> > > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > > > ---
> > > >  drivers/media/i2c/Kconfig    |   17 +
> > > >  drivers/media/i2c/Makefile   |    1 +
> > > >  drivers/media/i2c/tc358746.c | 1645 ++++++++++++++++++++++++++++++++++
> > > >  3 files changed, 1663 insertions(+)
> > > >  create mode 100644 drivers/media/i2c/tc358746.c
> 
> [snip]
> 
> > > > diff --git a/drivers/media/i2c/tc358746.c b/drivers/media/i2c/tc358746.c
> > > > new file mode 100644
> > > > index 000000000000..7b71d0cf72a9
> > > > --- /dev/null
> > > > +++ b/drivers/media/i2c/tc358746.c
> 
> [snip]
> 
> > > > +struct tc358746 {
> > > > +	struct v4l2_subdev		sd;
> > > > +	struct media_pad		pads[TC358746_NR_PADS];
> > > > +	struct v4l2_async_notifier	notifier;
> > > > +	struct v4l2_mbus_framefmt	mbusfmt;
> > > 
> > > Could you use the active state API instead of manually storing mbusfmt
> > > here ? It involves
> > 
> > I will do that, thanks for the hint and it also elimates a few basic
> > checks like the pad-num check.
> 
> Even nicer :-)
> 
> > > - Implementing the .init_cfg() operation
> > > - Calling v4l2_subdev_init_finalize() in probe
> > > - Replacing calls to __tc358746_get_pad_format() with
> > >   v4l2_subdev_get_pad_format()
> > > - Propagating the format from sink to source in tc358746_set_fmt()
> > > - Dropping tc358746_src_mbus_code() from tc358746_get_fmt() and simply
> > >   retrieving the format using v4l2_subdev_get_pad_format() there
> > > - Dropping this field
> > > 
> > > The formats for both the ACTIVE and TRY states will then be stored in
> > > the subdev state, unconditionally. You can retrieve the active state
> > > with v4l2_subdev_get_locked_active_state() in tc358746_s_stream().
> > > 
> > > > +	struct v4l2_fwnode_endpoint	csi_vep;
> > > > +
> > > > +	struct v4l2_ctrl_handler	ctrl_hdl;
> > > > +
> > > > +	struct regmap			*regmap;
> > > > +	struct clk			*refclk;
> > > > +	struct gpio_desc		*reset_gpio;
> > > > +	struct regulator_bulk_data	supplies[ARRAY_SIZE(tc358746_supplies)];
> > > > +
> > > > +	struct clk_hw			mclk_hw;
> > > > +	unsigned long			mclk_rate;
> > > > +	u8				mclk_prediv;
> > > > +	u16				mclk_postdiv;
> > > > +
> > > > +	unsigned long			pll_rate;
> > > > +	u8				pll_post_div;
> > > > +	u16				pll_pre_div;
> > > > +	u16				pll_mul;
> > > > +
> > > > +	struct v4l2_ctrl		*sensor_pclk_ctrl;
> > > > +
> > > > +#define TC358746_VB_MAX_SIZE		(511 * 32)
> > > > +#define TC358746_VB_DEFAULT_SIZE	  (1 * 32)
> > > > +	unsigned int			vb_size; /* Video buffer size in bits */
> > > > +
> > > > +	struct phy_configure_opts_mipi_dphy dphy_cfg;
> > > > +};
> 
> [snip]
> 
> > > > +#ifndef MHZ
> > > 
> > > Where would it be previously defined ? This sounds like asking for
> > > trouble later.
> > 
> > Sorry I don't get that, do you mean that I should define it at the very
> > beginning?
> 
> I mean that either MHZ is defined somewhere in the kernel already, in
> case we should include the corresponding header, or it's not, and I
> wouldn't add an #ifndev here. Otherwise, if someone adds a MHZ macro
> later that gets pulled in through one of the kernel headers used by the
> driver, it may cause subtle bugs if the definition is different. Of
> course nobody will
> 
> #define MHZ		42
> 
> but we could get
> 
> #define MHZ		1000 * 1000
> 
> and something could break here. I'd drop the #ifndef to get the compiler
> to complain if there's a redefinition.


Argh.. sorry, now I see what you meant. I have read it like "I'm asking
for troubles" because I'm defining it. Didn't saw that your comment was
only related to the ifndef guard, sure I can drop it.

> > > > +#define MHZ		(1000 * 1000)
> > > > +#endif
> 
> [snip]
> 
> > > > +static int
> > > > +tc358746_link_validate(struct v4l2_subdev *sd, struct media_link *link,
> > > > +		       struct v4l2_subdev_format *source_fmt,
> > > > +		       struct v4l2_subdev_format *sink_fmt)
> > > > +{
> > > > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > > > +	unsigned long csi_bitrate, sensor_bitrate;
> > > > +	const struct tc358746_format *fmt;
> > > > +	unsigned int fifo_sz, tmp, n;
> > > > +	s64 sensor_pclk_rate;
> > > > +
> > > > +	/* Check the FIFO settings */
> > > > +	fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
> > > > +	if (IS_ERR(fmt))
> > > > +		return PTR_ERR(fmt);
> > > > +
> > > > +	sensor_pclk_rate = v4l2_ctrl_g_ctrl_int64(tc358746->sensor_pclk_ctrl);
> > > > +	sensor_bitrate = sensor_pclk_rate * fmt->bus_width;
> > > > +
> > > > +	csi_bitrate = tc358746->dphy_cfg.lanes * tc358746->pll_rate;
> > > > +
> > > > +	dev_dbg(tc358746->sd.dev,
> > > > +		"Fifo settings params: sensor-bitrate:%lu csi-bitrate:%lu",
> > > > +		sensor_bitrate, csi_bitrate);
> > > > +
> > > > +	/* Avoid possible FIFO overflows */
> > > > +	if (csi_bitrate < sensor_bitrate) {
> > > > +		dev_err(sd->dev,
> > > > +			"Link validation failed csi-bitrate:%lu < sensor-bitrate:%lu\n",
> > > > +			csi_bitrate, sensor_bitrate);
> > > > +		return -EINVAL;
> > > > +	}
> > > > +
> > > > +	/* Best case */
> > > > +	if (csi_bitrate == sensor_bitrate) {
> > > > +		tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > > > +		goto out;
> > > > +	}
> > > > +
> > > > +	/*
> > > > +	 * Avoid possible FIFO underflow in case of
> > > > +	 * csi_bitrate > sensor_bitrate. For such case the chip has a internal
> > > > +	 * fifo which can be used to delay the line output.
> > > > +	 *
> > > > +	 * Fifo size calculation:
> > > > +	 *
> > > > +	 * fifo-sz, image-width - in bits
> > > > +	 * sbr                  - sensor_bitrate in bits/s
> > > > +	 * csir                 - csi_bitrate in bits/s
> > > > +	 *
> > > > +	 *                1             1      1
> > > > +	 * image-width * --- + fifo-sz --- >= ---- * image-width
> > > > +	 *               sbr           sbr    csir
> > > > +	 *
> > > > +	 * fifo-sz >= abs(sbr/csir * image-width - image-width)
> > > > +	 *                `-----´
> > > > +	 *                   n
> > > > +	 *
> > > > +	 */
> > > > +
> > > > +	sensor_bitrate /= TC358746_PRECISION;
> > > > +	n = csi_bitrate / sensor_bitrate;
> > > > +	tmp = (tc358746->mbusfmt.width * TC358746_PRECISION) / n;
> > > > +	fifo_sz = tc358746->mbusfmt.width - tmp;
> > > > +	fifo_sz *= fmt->bpp;
> > > > +	tc358746->vb_size = round_up(fifo_sz, 32);
> > > > +
> > > 
> > > Please also call v4l2_subdev_link_validate_default() here.
> > 
> > Did it in my internal prepared v2 ^^ I call it now at the very
> > beginning of this function.
> > 
> > > I wonder if the above calculation wouldn't be better performed in
> > > .s_stream() (or rather in a function being called by .s_stream()) when
> > > enabling streaming.
> > 
> > No I wouldn't shift that, since the link validation is in IMHO the
> > correct place to inform the user that the pipeline can't negotiate if
> > the fifo can't be configured correctly. Therefore I placed it here.
> 
> The issue is that the user could enable the link first, and then change
> the V4L2_CID_LINK_FREQ of the sensor and push the pixel rate above what
> the TC358746 can support. Given the model that configures subdevs
> independently, you can only validate the pipeline at stream on time.

The .link_validate() gets called during the media-pipeline
.link_validate() call which is called by __media_pipeline_start(). The
function description for this function is: "Mark a pipeline as
streaming". So I assume that it is called right in front of the
.s_stream() call and there are no further adaptions on the
V4L2_CID_LINK_FREQ allowed.

> > > > +out:
> > > > +	dev_dbg(tc358746->sd.dev,
> > > > +		"Found FIFO size[bits]:%u -> aligned to size[bits]:%u\n",
> > > > +		fifo_sz, tc358746->vb_size);
> > > > +
> > > > +	return tc358746->vb_size > TC358746_VB_MAX_SIZE ? -EINVAL : 0;
> > > > +}
> 
> [snip]
> 
> > > > +static int tc358746_probe(struct i2c_client *client)
> > > > +{
> > > > +	struct clk_init_data mclk_initdata = { };
> > > > +	struct device *dev = &client->dev;
> > > > +	struct v4l2_fwnode_endpoint *vep;
> > > > +	unsigned long csi_link_rate;
> > > > +	struct tc358746 *tc358746;
> > > > +	struct fwnode_handle *ep;
> > > > +	unsigned char csi_lanes;
> > > > +	struct v4l2_subdev *sd;
> > > > +	struct v4l2_ctrl *ctrl;
> > > > +	unsigned long refclk;
> > > > +	unsigned int i;
> > > > +	int err;
> > > > +	u32 val;
> > > > +
> > > > +	tc358746 = devm_kzalloc(&client->dev, sizeof(*tc358746), GFP_KERNEL);
> > > > +	if (!tc358746)
> > > > +		return -ENOMEM;
> > > > +
> > > > +	tc358746->regmap = devm_regmap_init_i2c(client, &tc358746_regmap_config);
> > > > +	if (IS_ERR(tc358746->regmap))
> > > > +		return dev_err_probe(dev, PTR_ERR(tc358746->regmap),
> > > > +				     "Failed to init regmap\n");
> > > > +
> > > > +	tc358746->refclk = devm_clk_get(dev, "refclk");
> > > > +	if (IS_ERR(tc358746->refclk))
> > > > +		return dev_err_probe(dev, PTR_ERR(tc358746->refclk),
> > > > +				     "Failed to get refclk\n");
> > > > +
> > > > +	err = clk_prepare_enable(tc358746->refclk);
> > > > +	if (err)
> > > > +		return dev_err_probe(dev, err,
> > > > +				     "Failed to enable refclk\n");
> > > > +
> > > > +	refclk = clk_get_rate(tc358746->refclk);
> > > > +	clk_disable_unprepare(tc358746->refclk);
> > > > +
> > > > +	if (refclk < 6 * MHZ || refclk > 40 * MHZ)
> > > > +		return dev_err_probe(dev, -EINVAL, "Invalid refclk range\n");
> > > > +
> > > > +	for (i = 0; i < ARRAY_SIZE(tc358746_supplies); i++)
> > > > +		tc358746->supplies[i].supply = tc358746_supplies[i];
> > > > +
> > > > +	err = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc358746_supplies),
> > > > +				      tc358746->supplies);
> > > > +	if (err)
> > > > +		return dev_err_probe(dev, err, "Failed to get supplies\n");
> > > > +
> > > > +	tc358746->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> > > > +						       GPIOD_OUT_HIGH);
> > > > +	if (IS_ERR(tc358746->reset_gpio))
> > > > +		return dev_err_probe(dev, PTR_ERR(tc358746->reset_gpio),
> > > > +				     "Failed to get reset-gpios\n");
> > > > +
> > > > +	sd = &tc358746->sd;
> > > > +	v4l2_i2c_subdev_init(sd, client, &tc358746_ops);
> > > > +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > > > +	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> > > > +	sd->entity.ops = &tc358746_entity_ops;
> > > > +
> > > > +	tc358746->pads[TC358746_SINK].flags = MEDIA_PAD_FL_SINK;
> > > > +	tc358746->pads[TC358746_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> > > > +	err = media_entity_pads_init(&sd->entity, TC358746_NR_PADS,
> > > > +				     tc358746->pads);
> > > > +	if (err)
> > > > +		return dev_err_probe(dev, err,
> > > > +				     "Failed to setup media-entity pads\n");
> > > > +
> > > > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), TC358746_SOURCE,
> > > > +					     0, 0);
> > > > +	if (!ep) {
> > > > +		dev_err(dev, "Missing endpoint node\n");
> > > > +		err = -EINVAL;
> > > > +		goto err_mc;
> > > > +	}
> > > > +
> > > > +	/* Currently we only support 'parallel in' -> 'csi out' */
> > > > +	vep = &tc358746->csi_vep;
> > > > +	vep->bus_type = V4L2_MBUS_CSI2_DPHY;
> > > > +	err = v4l2_fwnode_endpoint_alloc_parse(ep, vep);
> > > > +	fwnode_handle_put(ep);
> > > > +	if (err) {
> > > > +		dev_err(dev, "Failed to parse source endpoint\n");
> > > > +		goto err_mc;
> > > > +	}
> > > > +
> > > > +	csi_lanes = vep->bus.mipi_csi2.num_data_lanes;
> > > > +	if (csi_lanes == 0 || csi_lanes > 4 ||
> > > > +	    vep->nr_of_link_frequencies == 0) {
> > > > +		dev_err(dev, "error: Invalid CSI-2 settings\n");
> > > > +		err = -EINVAL;
> > > > +		goto err_vep;
> > > > +	}
> > > > +
> > > > +	/* TODO: Add support to handle multiple link frequencies */
> > > > +	csi_link_rate = (unsigned long)vep->link_frequencies[0];
> > > > +	tc358746->pll_rate = tc358746_find_pll_settings(tc358746, refclk,
> > > > +							csi_link_rate * 2);
> > > > +	if (!tc358746->pll_rate) {
> > > > +		err = -EINVAL;
> > > > +		goto err_vep;
> > > > +	}
> > > > +
> > > > +	err = phy_mipi_dphy_get_default_config_for_hsclk(tc358746->pll_rate,
> > > > +							 csi_lanes,
> > > > +							 &tc358746->dphy_cfg);
> > > > +	if (err)
> > > > +		goto err_vep;
> > > > +
> > > > +	tc358746->mbusfmt = tc358746_def_fmt;
> > > > +	tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > > > +
> > > > +	dev_set_drvdata(dev, tc358746);
> > > > +	pm_runtime_set_autosuspend_delay(dev, 200);
> > > > +	pm_runtime_use_autosuspend(dev);
> > > > +	pm_runtime_enable(dev);
> > > > +
> > > > +	err = pm_runtime_resume_and_get(dev);
> > > > +	if (err < 0) {
> > > > +		dev_err(dev, "Failed to resume the device\n");
> > > > +		goto err_vep;
> > > > +	}
> > > > +
> > > > +	 /* Ensure that CSI interface is put into LP-11 state */
> > > > +	err = tc358746_sw_reset(tc358746);
> > > > +	if (err) {
> > > > +		pm_runtime_put_noidle(dev);
> > > > +		dev_err(dev, "Failed to reset the device\n");
> > > > +		goto err_pm;
> > > > +	}
> > > > +
> > > > +	err = tc358746_read(tc358746, CHIPID_REG, &val);
> > > > +	pm_runtime_mark_last_busy(dev);
> > > > +	pm_runtime_put_sync_autosuspend(dev);
> > > > +	if (err) {
> > > > +		dev_err(dev, "Failed to read chipid\n");
> > > > +		err = -ENODEV;
> > > > +		goto err_pm;
> > > > +	}
> > > > +
> > > > +	if (FIELD_GET(CHIPID, val) != 0x44) {
> > > > +		dev_err(dev, "Invalid chipid 0x%02x\n",
> > > > +			(u32)FIELD_GET(CHIPID, val));
> > > > +		err = -ENODEV;
> > > > +		goto err_pm;
> > > > +	}
> > > > +
> > > > +	/* Optional MCLK provider support */
> > > > +	if (device_property_present(dev, "#clock-cells")) {
> > > > +		const char *mclk_name;
> > > > +
> > > > +		/* Init to highest possibel MCLK */
> > > > +		tc358746->mclk_postdiv = 512;
> > > > +		tc358746->mclk_prediv = 8;
> > > > +
> > > > +		mclk_name = "tc358746-mclk";
> > > > +		device_property_read_string(dev, "clock-output-names",
> > > > +					    &mclk_name);
> > > > +
> > > > +		mclk_initdata.name = mclk_name;
> > > > +		mclk_initdata.ops = &tc358746_mclk_ops;
> > > > +		tc358746->mclk_hw.init = &mclk_initdata;
> > > > +
> > > > +		err = devm_clk_hw_register(dev, &tc358746->mclk_hw);
> > > > +		if (err) {
> > > > +			dev_err(dev, "Failed to register mclk provider\n");
> > > > +			goto err_pm;
> > > > +		}
> > > > +
> > > > +		err = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> > > > +						  &tc358746->mclk_hw);
> > > > +		if (err) {
> > > > +			dev_err(dev, "Failed to add mclk provider\n");
> > > > +			goto err_pm;
> > > > +		}
> > > > +	}
> > > > +
> > > > +	v4l2_ctrl_handler_init(&tc358746->ctrl_hdl, 1);
> > > > +
> > > > +	ctrl = v4l2_ctrl_new_int_menu(&tc358746->ctrl_hdl, NULL,
> > > > +				      V4L2_CID_LINK_FREQ, 0, 0,
> > > > +				      vep->link_frequencies);
> > > > +	if (ctrl)
> > > > +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > > > +
> > > > +	tc358746->sd.ctrl_handler = &tc358746->ctrl_hdl;
> > > > +	if (tc358746->ctrl_hdl.error) {
> > > > +		err = tc358746->ctrl_hdl.error;
> > > > +		goto err_pm;
> > > > +	}
> > > > +
> > > > +	v4l2_ctrl_handler_setup(&tc358746->ctrl_hdl);
> > > > +
> > > > +	err = tc358746_async_register(tc358746);
> > > > +	if (err < 0)
> > > > +		goto err_ctrl;
> > > > +
> > > > +	dev_info(dev, "%s found @ 0x%x (%s)\n", client->name,
> > > > +		  client->addr, client->adapter->name);
> > > 
> > > I'd skip this to avoid adding noise to the kernel log at boot time. I
> > > would also probably split some of the code out of the probe function as
> > > it's fairly large. Up to you.
> > 
> > Yes it is large but most of it is just requesting stuff and so..
> > Therefore I kept it here since I don't need it elsewhere. What about
> > setting it to dev_dbg()? Sometimes it can be useful e.g. to find the
> > problem why /dev/media is not comming up..
> 
> I find that enabling dev_dbg() messages from drivers/base/dd.c are
> helpful for that, but a dev_dbg() message here is fine too.

Ah okay, didn't checked that deep. I can remove it if you want, in my v2
I changed it to dev_dbg().

> > > > +
> > > > +	return 0;
> > > > +
> > > > +err_ctrl:
> > > > +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > > > +err_pm:
> > > > +	pm_runtime_disable(dev);
> > > > +	pm_runtime_set_suspended(dev);
> > > > +	pm_runtime_dont_use_autosuspend(dev);
> > > > +err_vep:
> > > > +	v4l2_fwnode_endpoint_free(vep);
> > > > +err_mc:
> > > > +	media_entity_cleanup(&sd->entity);
> > > > +
> > > > +	return err;
> > > > +}
> > > > +
> > > > +static int tc358746_remove(struct i2c_client *client)
> > > > +{
> > > > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > > > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > > > +
> > > > +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > > > +	v4l2_fwnode_endpoint_free(&tc358746->csi_vep);
> > > > +	v4l2_async_nf_unregister(&tc358746->notifier);
> > > > +	v4l2_async_nf_cleanup(&tc358746->notifier);
> > > > +	v4l2_async_unregister_subdev(sd);
> > > > +	v4l2_device_unregister_subdev(sd);
> > > 
> > > This shouldn't be needed v4l2_async_unregister_subdev() should be
> > > enough.
> > 
> > Okay, thanks. There are a lot of unregister helpers in the v4l2 space..
> 
> Too many of them indeed. I'd like to simplify all that.

*Thumbs up*

I already pushed my v2 which needs little rework due to
kernel-test-robot findings so I will send a v3. So if there are any
further findings let's move on to the v2.

Thanks,
  Marco

> > > > +	media_entity_cleanup(&sd->entity);
> > > > +
> > > > +	pm_runtime_disable(sd->dev);
> > > > +	pm_runtime_set_suspended(sd->dev);
> > > > +	pm_runtime_dont_use_autosuspend(sd->dev);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int tc358746_suspend(struct device *dev)
> > > > +{
> > > > +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > > > +
> > > > +	clk_disable_unprepare(tc358746->refclk);
> > > > +
> > > > +	return regulator_bulk_disable(ARRAY_SIZE(tc358746_supplies),
> > > > +				      tc358746->supplies);
> > > 
> > > Shouldn't you reenable the clock if this fails ?
> > 
> > Hm.. if this fails I could end in a undefined chip state. But I got the
> > point that the framework would be in a bad state if it tries again to
> > suspend the device.
> 
> It would be, and without a way to recover, so that could be an issue.
> 
> > > > +}
> > > > +
> > > > +static int tc358746_resume(struct device *dev)
> > > > +{
> > > > +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > > > +	int err;
> > > > +
> > > > +	gpiod_set_value(tc358746->reset_gpio, 1);
> > > > +
> > > > +	err = regulator_bulk_enable(ARRAY_SIZE(tc358746_supplies),
> > > > +				    tc358746->supplies);
> > > > +	if (err)
> > > > +		return err;
> > > > +
> > > > +	/* min. 200ns */
> > > > +	usleep_range(10, 20);
> > > > +
> > > > +	gpiod_set_value(tc358746->reset_gpio, 0);
> > > > +
> > > > +	err = clk_prepare_enable(tc358746->refclk);
> > > > +	if (err)
> > > > +		return err;
> > > 
> > > The regulators need to be disabled in case of failure here and below
> > > (and so does the clock below).
> > 
> > Yes, you're right.
> > 
> > > > +
> > > > +	/* min. 700us ... 1ms */
> > > > +	usleep_range(1000, 1500);
> > > > +
> > > > +	/* Sync state */
> > > > +	err = tc358746_apply_pll_config(tc358746);
> > > > +	if (err)
> > > > +		return err;
> > > > +
> > > > +	err = tc358746_apply_dphy_config(tc358746);
> > > > +	if (err)
> > > > +		return err;
> > > > +
> > > > +	return tc358746_apply_misc_config(tc358746);
> > > 
> > > Does all this belong to the PM resume handler ? It seems configuration
> > > could be handled in .s_stream() instead.
> > 
> > This gets called by the s_stream() during getting the power state but I
> > can move the dphy/misc_config to the .s_stream() of course.
> 
> That would be nice, thanks.
> 
> > The pll
> > needs to be there since the device can be a clock provider e.g. for the
> > sensor.
> 
> OK.
> 
> > Thanks for the review :)
> > 
> > > > +}
> > > > +
> > > > +DEFINE_RUNTIME_DEV_PM_OPS(tc358746_pm_ops, tc358746_suspend,
> > > > +			  tc358746_resume, NULL);
> > > > +
> > > > +static const struct of_device_id __maybe_unused tc358746_of_match[] = {
> > > > +	{ .compatible = "toshiba,tc358746" },
> > > > +	{ },
> > > > +};
> > > > +MODULE_DEVICE_TABLE(of, tc358746_of_match);
> > > > +
> > > > +static struct i2c_driver tc358746_driver = {
> > > > +	.driver = {
> > > > +		.name = "tc358746",
> > > > +		.pm = pm_ptr(&tc358746_pm_ops),
> > > > +		.of_match_table = tc358746_of_match,
> > > > +	},
> > > > +	.probe_new = tc358746_probe,
> > > > +	.remove = tc358746_remove,
> > > > +};
> > > > +
> > > > +module_i2c_driver(tc358746_driver);
> > > > +
> > > > +MODULE_DESCRIPTION("Toshiba TC358746 Parallel to CSI-2 bridge driver");
> > > > +MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
> > > > +MODULE_LICENSE("GPL");
> 
> -- 
> Regards,
> 
> Laurent Pinchart
>
Laurent Pinchart Sept. 19, 2022, 10:57 a.m. UTC | #5
Hi Marco,

On Mon, Sep 19, 2022 at 10:40:38AM +0200, Marco Felsch wrote:
> On 22-09-16, Laurent Pinchart wrote:
> > On Thu, Sep 15, 2022 at 06:54:04PM +0200, Marco Felsch wrote:
> > > On 22-09-05, Laurent Pinchart wrote:
> > > > On Thu, Aug 18, 2022 at 04:33:07PM +0200, Marco Felsch wrote:
> > > > > Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
> > > > > supports two operating modes:
> > > > >   1st) parallel-in -> mipi-csi out
> > > > >   2nd) mipi-csi in -> parallel out
> > > > > 
> > > > > This patch only adds the support for the 1st mode.
> > > > > 
> > > > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > > > > ---
> > > > >  drivers/media/i2c/Kconfig    |   17 +
> > > > >  drivers/media/i2c/Makefile   |    1 +
> > > > >  drivers/media/i2c/tc358746.c | 1645 ++++++++++++++++++++++++++++++++++
> > > > >  3 files changed, 1663 insertions(+)
> > > > >  create mode 100644 drivers/media/i2c/tc358746.c
> > 
> > [snip]
> > 
> > > > > diff --git a/drivers/media/i2c/tc358746.c b/drivers/media/i2c/tc358746.c
> > > > > new file mode 100644
> > > > > index 000000000000..7b71d0cf72a9
> > > > > --- /dev/null
> > > > > +++ b/drivers/media/i2c/tc358746.c
> > 
> > [snip]
> > 
> > > > > +struct tc358746 {
> > > > > +	struct v4l2_subdev		sd;
> > > > > +	struct media_pad		pads[TC358746_NR_PADS];
> > > > > +	struct v4l2_async_notifier	notifier;
> > > > > +	struct v4l2_mbus_framefmt	mbusfmt;
> > > > 
> > > > Could you use the active state API instead of manually storing mbusfmt
> > > > here ? It involves
> > > 
> > > I will do that, thanks for the hint and it also elimates a few basic
> > > checks like the pad-num check.
> > 
> > Even nicer :-)
> > 
> > > > - Implementing the .init_cfg() operation
> > > > - Calling v4l2_subdev_init_finalize() in probe
> > > > - Replacing calls to __tc358746_get_pad_format() with
> > > >   v4l2_subdev_get_pad_format()
> > > > - Propagating the format from sink to source in tc358746_set_fmt()
> > > > - Dropping tc358746_src_mbus_code() from tc358746_get_fmt() and simply
> > > >   retrieving the format using v4l2_subdev_get_pad_format() there
> > > > - Dropping this field
> > > > 
> > > > The formats for both the ACTIVE and TRY states will then be stored in
> > > > the subdev state, unconditionally. You can retrieve the active state
> > > > with v4l2_subdev_get_locked_active_state() in tc358746_s_stream().
> > > > 
> > > > > +	struct v4l2_fwnode_endpoint	csi_vep;
> > > > > +
> > > > > +	struct v4l2_ctrl_handler	ctrl_hdl;
> > > > > +
> > > > > +	struct regmap			*regmap;
> > > > > +	struct clk			*refclk;
> > > > > +	struct gpio_desc		*reset_gpio;
> > > > > +	struct regulator_bulk_data	supplies[ARRAY_SIZE(tc358746_supplies)];
> > > > > +
> > > > > +	struct clk_hw			mclk_hw;
> > > > > +	unsigned long			mclk_rate;
> > > > > +	u8				mclk_prediv;
> > > > > +	u16				mclk_postdiv;
> > > > > +
> > > > > +	unsigned long			pll_rate;
> > > > > +	u8				pll_post_div;
> > > > > +	u16				pll_pre_div;
> > > > > +	u16				pll_mul;
> > > > > +
> > > > > +	struct v4l2_ctrl		*sensor_pclk_ctrl;
> > > > > +
> > > > > +#define TC358746_VB_MAX_SIZE		(511 * 32)
> > > > > +#define TC358746_VB_DEFAULT_SIZE	  (1 * 32)
> > > > > +	unsigned int			vb_size; /* Video buffer size in bits */
> > > > > +
> > > > > +	struct phy_configure_opts_mipi_dphy dphy_cfg;
> > > > > +};
> > 
> > [snip]
> > 
> > > > > +#ifndef MHZ
> > > > 
> > > > Where would it be previously defined ? This sounds like asking for
> > > > trouble later.
> > > 
> > > Sorry I don't get that, do you mean that I should define it at the very
> > > beginning?
> > 
> > I mean that either MHZ is defined somewhere in the kernel already, in
> > case we should include the corresponding header, or it's not, and I
> > wouldn't add an #ifndev here. Otherwise, if someone adds a MHZ macro
> > later that gets pulled in through one of the kernel headers used by the
> > driver, it may cause subtle bugs if the definition is different. Of
> > course nobody will
> > 
> > #define MHZ		42
> > 
> > but we could get
> > 
> > #define MHZ		1000 * 1000
> > 
> > and something could break here. I'd drop the #ifndef to get the compiler
> > to complain if there's a redefinition.
> 
> Argh.. sorry, now I see what you meant. I have read it like "I'm asking
> for troubles" because I'm defining it. Didn't saw that your comment was
> only related to the ifndef guard, sure I can drop it.
> 
> > > > > +#define MHZ		(1000 * 1000)
> > > > > +#endif
> > 
> > [snip]
> > 
> > > > > +static int
> > > > > +tc358746_link_validate(struct v4l2_subdev *sd, struct media_link *link,
> > > > > +		       struct v4l2_subdev_format *source_fmt,
> > > > > +		       struct v4l2_subdev_format *sink_fmt)
> > > > > +{
> > > > > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > > > > +	unsigned long csi_bitrate, sensor_bitrate;
> > > > > +	const struct tc358746_format *fmt;
> > > > > +	unsigned int fifo_sz, tmp, n;
> > > > > +	s64 sensor_pclk_rate;
> > > > > +
> > > > > +	/* Check the FIFO settings */
> > > > > +	fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
> > > > > +	if (IS_ERR(fmt))
> > > > > +		return PTR_ERR(fmt);
> > > > > +
> > > > > +	sensor_pclk_rate = v4l2_ctrl_g_ctrl_int64(tc358746->sensor_pclk_ctrl);
> > > > > +	sensor_bitrate = sensor_pclk_rate * fmt->bus_width;
> > > > > +
> > > > > +	csi_bitrate = tc358746->dphy_cfg.lanes * tc358746->pll_rate;
> > > > > +
> > > > > +	dev_dbg(tc358746->sd.dev,
> > > > > +		"Fifo settings params: sensor-bitrate:%lu csi-bitrate:%lu",
> > > > > +		sensor_bitrate, csi_bitrate);
> > > > > +
> > > > > +	/* Avoid possible FIFO overflows */
> > > > > +	if (csi_bitrate < sensor_bitrate) {
> > > > > +		dev_err(sd->dev,
> > > > > +			"Link validation failed csi-bitrate:%lu < sensor-bitrate:%lu\n",
> > > > > +			csi_bitrate, sensor_bitrate);
> > > > > +		return -EINVAL;
> > > > > +	}
> > > > > +
> > > > > +	/* Best case */
> > > > > +	if (csi_bitrate == sensor_bitrate) {
> > > > > +		tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > > > > +		goto out;
> > > > > +	}
> > > > > +
> > > > > +	/*
> > > > > +	 * Avoid possible FIFO underflow in case of
> > > > > +	 * csi_bitrate > sensor_bitrate. For such case the chip has a internal
> > > > > +	 * fifo which can be used to delay the line output.
> > > > > +	 *
> > > > > +	 * Fifo size calculation:
> > > > > +	 *
> > > > > +	 * fifo-sz, image-width - in bits
> > > > > +	 * sbr                  - sensor_bitrate in bits/s
> > > > > +	 * csir                 - csi_bitrate in bits/s
> > > > > +	 *
> > > > > +	 *                1             1      1
> > > > > +	 * image-width * --- + fifo-sz --- >= ---- * image-width
> > > > > +	 *               sbr           sbr    csir
> > > > > +	 *
> > > > > +	 * fifo-sz >= abs(sbr/csir * image-width - image-width)
> > > > > +	 *                `-----´
> > > > > +	 *                   n
> > > > > +	 *
> > > > > +	 */
> > > > > +
> > > > > +	sensor_bitrate /= TC358746_PRECISION;
> > > > > +	n = csi_bitrate / sensor_bitrate;
> > > > > +	tmp = (tc358746->mbusfmt.width * TC358746_PRECISION) / n;
> > > > > +	fifo_sz = tc358746->mbusfmt.width - tmp;
> > > > > +	fifo_sz *= fmt->bpp;
> > > > > +	tc358746->vb_size = round_up(fifo_sz, 32);
> > > > > +
> > > > 
> > > > Please also call v4l2_subdev_link_validate_default() here.
> > > 
> > > Did it in my internal prepared v2 ^^ I call it now at the very
> > > beginning of this function.
> > > 
> > > > I wonder if the above calculation wouldn't be better performed in
> > > > .s_stream() (or rather in a function being called by .s_stream()) when
> > > > enabling streaming.
> > > 
> > > No I wouldn't shift that, since the link validation is in IMHO the
> > > correct place to inform the user that the pipeline can't negotiate if
> > > the fifo can't be configured correctly. Therefore I placed it here.
> > 
> > The issue is that the user could enable the link first, and then change
> > the V4L2_CID_LINK_FREQ of the sensor and push the pixel rate above what
> > the TC358746 can support. Given the model that configures subdevs
> > independently, you can only validate the pipeline at stream on time.
> 
> The .link_validate() gets called during the media-pipeline
> .link_validate() call which is called by __media_pipeline_start(). The
> function description for this function is: "Mark a pipeline as
> streaming". So I assume that it is called right in front of the
> .s_stream() call and there are no further adaptions on the
> V4L2_CID_LINK_FREQ allowed.

You're right, I mistook link validation for link setup. It should be
fine then, although the subdev core currently doesn't correctly enforce
that the link frequency won't change. This needs to be addressed in the
core (and will likely then require changes in drivers), but that's not
an issue for this patch.

> > > > > +out:
> > > > > +	dev_dbg(tc358746->sd.dev,
> > > > > +		"Found FIFO size[bits]:%u -> aligned to size[bits]:%u\n",
> > > > > +		fifo_sz, tc358746->vb_size);
> > > > > +
> > > > > +	return tc358746->vb_size > TC358746_VB_MAX_SIZE ? -EINVAL : 0;
> > > > > +}
> > 
> > [snip]
> > 
> > > > > +static int tc358746_probe(struct i2c_client *client)
> > > > > +{
> > > > > +	struct clk_init_data mclk_initdata = { };
> > > > > +	struct device *dev = &client->dev;
> > > > > +	struct v4l2_fwnode_endpoint *vep;
> > > > > +	unsigned long csi_link_rate;
> > > > > +	struct tc358746 *tc358746;
> > > > > +	struct fwnode_handle *ep;
> > > > > +	unsigned char csi_lanes;
> > > > > +	struct v4l2_subdev *sd;
> > > > > +	struct v4l2_ctrl *ctrl;
> > > > > +	unsigned long refclk;
> > > > > +	unsigned int i;
> > > > > +	int err;
> > > > > +	u32 val;
> > > > > +
> > > > > +	tc358746 = devm_kzalloc(&client->dev, sizeof(*tc358746), GFP_KERNEL);
> > > > > +	if (!tc358746)
> > > > > +		return -ENOMEM;
> > > > > +
> > > > > +	tc358746->regmap = devm_regmap_init_i2c(client, &tc358746_regmap_config);
> > > > > +	if (IS_ERR(tc358746->regmap))
> > > > > +		return dev_err_probe(dev, PTR_ERR(tc358746->regmap),
> > > > > +				     "Failed to init regmap\n");
> > > > > +
> > > > > +	tc358746->refclk = devm_clk_get(dev, "refclk");
> > > > > +	if (IS_ERR(tc358746->refclk))
> > > > > +		return dev_err_probe(dev, PTR_ERR(tc358746->refclk),
> > > > > +				     "Failed to get refclk\n");
> > > > > +
> > > > > +	err = clk_prepare_enable(tc358746->refclk);
> > > > > +	if (err)
> > > > > +		return dev_err_probe(dev, err,
> > > > > +				     "Failed to enable refclk\n");
> > > > > +
> > > > > +	refclk = clk_get_rate(tc358746->refclk);
> > > > > +	clk_disable_unprepare(tc358746->refclk);
> > > > > +
> > > > > +	if (refclk < 6 * MHZ || refclk > 40 * MHZ)
> > > > > +		return dev_err_probe(dev, -EINVAL, "Invalid refclk range\n");
> > > > > +
> > > > > +	for (i = 0; i < ARRAY_SIZE(tc358746_supplies); i++)
> > > > > +		tc358746->supplies[i].supply = tc358746_supplies[i];
> > > > > +
> > > > > +	err = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc358746_supplies),
> > > > > +				      tc358746->supplies);
> > > > > +	if (err)
> > > > > +		return dev_err_probe(dev, err, "Failed to get supplies\n");
> > > > > +
> > > > > +	tc358746->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> > > > > +						       GPIOD_OUT_HIGH);
> > > > > +	if (IS_ERR(tc358746->reset_gpio))
> > > > > +		return dev_err_probe(dev, PTR_ERR(tc358746->reset_gpio),
> > > > > +				     "Failed to get reset-gpios\n");
> > > > > +
> > > > > +	sd = &tc358746->sd;
> > > > > +	v4l2_i2c_subdev_init(sd, client, &tc358746_ops);
> > > > > +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > > > > +	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> > > > > +	sd->entity.ops = &tc358746_entity_ops;
> > > > > +
> > > > > +	tc358746->pads[TC358746_SINK].flags = MEDIA_PAD_FL_SINK;
> > > > > +	tc358746->pads[TC358746_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> > > > > +	err = media_entity_pads_init(&sd->entity, TC358746_NR_PADS,
> > > > > +				     tc358746->pads);
> > > > > +	if (err)
> > > > > +		return dev_err_probe(dev, err,
> > > > > +				     "Failed to setup media-entity pads\n");
> > > > > +
> > > > > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), TC358746_SOURCE,
> > > > > +					     0, 0);
> > > > > +	if (!ep) {
> > > > > +		dev_err(dev, "Missing endpoint node\n");
> > > > > +		err = -EINVAL;
> > > > > +		goto err_mc;
> > > > > +	}
> > > > > +
> > > > > +	/* Currently we only support 'parallel in' -> 'csi out' */
> > > > > +	vep = &tc358746->csi_vep;
> > > > > +	vep->bus_type = V4L2_MBUS_CSI2_DPHY;
> > > > > +	err = v4l2_fwnode_endpoint_alloc_parse(ep, vep);
> > > > > +	fwnode_handle_put(ep);
> > > > > +	if (err) {
> > > > > +		dev_err(dev, "Failed to parse source endpoint\n");
> > > > > +		goto err_mc;
> > > > > +	}
> > > > > +
> > > > > +	csi_lanes = vep->bus.mipi_csi2.num_data_lanes;
> > > > > +	if (csi_lanes == 0 || csi_lanes > 4 ||
> > > > > +	    vep->nr_of_link_frequencies == 0) {
> > > > > +		dev_err(dev, "error: Invalid CSI-2 settings\n");
> > > > > +		err = -EINVAL;
> > > > > +		goto err_vep;
> > > > > +	}
> > > > > +
> > > > > +	/* TODO: Add support to handle multiple link frequencies */
> > > > > +	csi_link_rate = (unsigned long)vep->link_frequencies[0];
> > > > > +	tc358746->pll_rate = tc358746_find_pll_settings(tc358746, refclk,
> > > > > +							csi_link_rate * 2);
> > > > > +	if (!tc358746->pll_rate) {
> > > > > +		err = -EINVAL;
> > > > > +		goto err_vep;
> > > > > +	}
> > > > > +
> > > > > +	err = phy_mipi_dphy_get_default_config_for_hsclk(tc358746->pll_rate,
> > > > > +							 csi_lanes,
> > > > > +							 &tc358746->dphy_cfg);
> > > > > +	if (err)
> > > > > +		goto err_vep;
> > > > > +
> > > > > +	tc358746->mbusfmt = tc358746_def_fmt;
> > > > > +	tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > > > > +
> > > > > +	dev_set_drvdata(dev, tc358746);
> > > > > +	pm_runtime_set_autosuspend_delay(dev, 200);
> > > > > +	pm_runtime_use_autosuspend(dev);
> > > > > +	pm_runtime_enable(dev);
> > > > > +
> > > > > +	err = pm_runtime_resume_and_get(dev);
> > > > > +	if (err < 0) {
> > > > > +		dev_err(dev, "Failed to resume the device\n");
> > > > > +		goto err_vep;
> > > > > +	}
> > > > > +
> > > > > +	 /* Ensure that CSI interface is put into LP-11 state */
> > > > > +	err = tc358746_sw_reset(tc358746);
> > > > > +	if (err) {
> > > > > +		pm_runtime_put_noidle(dev);
> > > > > +		dev_err(dev, "Failed to reset the device\n");
> > > > > +		goto err_pm;
> > > > > +	}
> > > > > +
> > > > > +	err = tc358746_read(tc358746, CHIPID_REG, &val);
> > > > > +	pm_runtime_mark_last_busy(dev);
> > > > > +	pm_runtime_put_sync_autosuspend(dev);
> > > > > +	if (err) {
> > > > > +		dev_err(dev, "Failed to read chipid\n");
> > > > > +		err = -ENODEV;
> > > > > +		goto err_pm;
> > > > > +	}
> > > > > +
> > > > > +	if (FIELD_GET(CHIPID, val) != 0x44) {
> > > > > +		dev_err(dev, "Invalid chipid 0x%02x\n",
> > > > > +			(u32)FIELD_GET(CHIPID, val));
> > > > > +		err = -ENODEV;
> > > > > +		goto err_pm;
> > > > > +	}
> > > > > +
> > > > > +	/* Optional MCLK provider support */
> > > > > +	if (device_property_present(dev, "#clock-cells")) {
> > > > > +		const char *mclk_name;
> > > > > +
> > > > > +		/* Init to highest possibel MCLK */
> > > > > +		tc358746->mclk_postdiv = 512;
> > > > > +		tc358746->mclk_prediv = 8;
> > > > > +
> > > > > +		mclk_name = "tc358746-mclk";
> > > > > +		device_property_read_string(dev, "clock-output-names",
> > > > > +					    &mclk_name);
> > > > > +
> > > > > +		mclk_initdata.name = mclk_name;
> > > > > +		mclk_initdata.ops = &tc358746_mclk_ops;
> > > > > +		tc358746->mclk_hw.init = &mclk_initdata;
> > > > > +
> > > > > +		err = devm_clk_hw_register(dev, &tc358746->mclk_hw);
> > > > > +		if (err) {
> > > > > +			dev_err(dev, "Failed to register mclk provider\n");
> > > > > +			goto err_pm;
> > > > > +		}
> > > > > +
> > > > > +		err = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> > > > > +						  &tc358746->mclk_hw);
> > > > > +		if (err) {
> > > > > +			dev_err(dev, "Failed to add mclk provider\n");
> > > > > +			goto err_pm;
> > > > > +		}
> > > > > +	}
> > > > > +
> > > > > +	v4l2_ctrl_handler_init(&tc358746->ctrl_hdl, 1);
> > > > > +
> > > > > +	ctrl = v4l2_ctrl_new_int_menu(&tc358746->ctrl_hdl, NULL,
> > > > > +				      V4L2_CID_LINK_FREQ, 0, 0,
> > > > > +				      vep->link_frequencies);
> > > > > +	if (ctrl)
> > > > > +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > > > > +
> > > > > +	tc358746->sd.ctrl_handler = &tc358746->ctrl_hdl;
> > > > > +	if (tc358746->ctrl_hdl.error) {
> > > > > +		err = tc358746->ctrl_hdl.error;
> > > > > +		goto err_pm;
> > > > > +	}
> > > > > +
> > > > > +	v4l2_ctrl_handler_setup(&tc358746->ctrl_hdl);
> > > > > +
> > > > > +	err = tc358746_async_register(tc358746);
> > > > > +	if (err < 0)
> > > > > +		goto err_ctrl;
> > > > > +
> > > > > +	dev_info(dev, "%s found @ 0x%x (%s)\n", client->name,
> > > > > +		  client->addr, client->adapter->name);
> > > > 
> > > > I'd skip this to avoid adding noise to the kernel log at boot time. I
> > > > would also probably split some of the code out of the probe function as
> > > > it's fairly large. Up to you.
> > > 
> > > Yes it is large but most of it is just requesting stuff and so..
> > > Therefore I kept it here since I don't need it elsewhere. What about
> > > setting it to dev_dbg()? Sometimes it can be useful e.g. to find the
> > > problem why /dev/media is not comming up..
> > 
> > I find that enabling dev_dbg() messages from drivers/base/dd.c are
> > helpful for that, but a dev_dbg() message here is fine too.
> 
> Ah okay, didn't checked that deep. I can remove it if you want, in my v2
> I changed it to dev_dbg().
> 
> > > > > +
> > > > > +	return 0;
> > > > > +
> > > > > +err_ctrl:
> > > > > +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > > > > +err_pm:
> > > > > +	pm_runtime_disable(dev);
> > > > > +	pm_runtime_set_suspended(dev);
> > > > > +	pm_runtime_dont_use_autosuspend(dev);
> > > > > +err_vep:
> > > > > +	v4l2_fwnode_endpoint_free(vep);
> > > > > +err_mc:
> > > > > +	media_entity_cleanup(&sd->entity);
> > > > > +
> > > > > +	return err;
> > > > > +}
> > > > > +
> > > > > +static int tc358746_remove(struct i2c_client *client)
> > > > > +{
> > > > > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > > > > +	struct tc358746 *tc358746 = to_tc358746(sd);
> > > > > +
> > > > > +	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > > > > +	v4l2_fwnode_endpoint_free(&tc358746->csi_vep);
> > > > > +	v4l2_async_nf_unregister(&tc358746->notifier);
> > > > > +	v4l2_async_nf_cleanup(&tc358746->notifier);
> > > > > +	v4l2_async_unregister_subdev(sd);
> > > > > +	v4l2_device_unregister_subdev(sd);
> > > > 
> > > > This shouldn't be needed v4l2_async_unregister_subdev() should be
> > > > enough.
> > > 
> > > Okay, thanks. There are a lot of unregister helpers in the v4l2 space..
> > 
> > Too many of them indeed. I'd like to simplify all that.
> 
> *Thumbs up*
> 
> I already pushed my v2 which needs little rework due to
> kernel-test-robot findings so I will send a v3. So if there are any
> further findings let's move on to the v2.
> 
> > > > > +	media_entity_cleanup(&sd->entity);
> > > > > +
> > > > > +	pm_runtime_disable(sd->dev);
> > > > > +	pm_runtime_set_suspended(sd->dev);
> > > > > +	pm_runtime_dont_use_autosuspend(sd->dev);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static int tc358746_suspend(struct device *dev)
> > > > > +{
> > > > > +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > > > > +
> > > > > +	clk_disable_unprepare(tc358746->refclk);
> > > > > +
> > > > > +	return regulator_bulk_disable(ARRAY_SIZE(tc358746_supplies),
> > > > > +				      tc358746->supplies);
> > > > 
> > > > Shouldn't you reenable the clock if this fails ?
> > > 
> > > Hm.. if this fails I could end in a undefined chip state. But I got the
> > > point that the framework would be in a bad state if it tries again to
> > > suspend the device.
> > 
> > It would be, and without a way to recover, so that could be an issue.
> > 
> > > > > +}
> > > > > +
> > > > > +static int tc358746_resume(struct device *dev)
> > > > > +{
> > > > > +	struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > > > > +	int err;
> > > > > +
> > > > > +	gpiod_set_value(tc358746->reset_gpio, 1);
> > > > > +
> > > > > +	err = regulator_bulk_enable(ARRAY_SIZE(tc358746_supplies),
> > > > > +				    tc358746->supplies);
> > > > > +	if (err)
> > > > > +		return err;
> > > > > +
> > > > > +	/* min. 200ns */
> > > > > +	usleep_range(10, 20);
> > > > > +
> > > > > +	gpiod_set_value(tc358746->reset_gpio, 0);
> > > > > +
> > > > > +	err = clk_prepare_enable(tc358746->refclk);
> > > > > +	if (err)
> > > > > +		return err;
> > > > 
> > > > The regulators need to be disabled in case of failure here and below
> > > > (and so does the clock below).
> > > 
> > > Yes, you're right.
> > > 
> > > > > +
> > > > > +	/* min. 700us ... 1ms */
> > > > > +	usleep_range(1000, 1500);
> > > > > +
> > > > > +	/* Sync state */
> > > > > +	err = tc358746_apply_pll_config(tc358746);
> > > > > +	if (err)
> > > > > +		return err;
> > > > > +
> > > > > +	err = tc358746_apply_dphy_config(tc358746);
> > > > > +	if (err)
> > > > > +		return err;
> > > > > +
> > > > > +	return tc358746_apply_misc_config(tc358746);
> > > > 
> > > > Does all this belong to the PM resume handler ? It seems configuration
> > > > could be handled in .s_stream() instead.
> > > 
> > > This gets called by the s_stream() during getting the power state but I
> > > can move the dphy/misc_config to the .s_stream() of course.
> > 
> > That would be nice, thanks.
> > 
> > > The pll
> > > needs to be there since the device can be a clock provider e.g. for the
> > > sensor.
> > 
> > OK.
> > 
> > > Thanks for the review :)
> > > 
> > > > > +}
> > > > > +
> > > > > +DEFINE_RUNTIME_DEV_PM_OPS(tc358746_pm_ops, tc358746_suspend,
> > > > > +			  tc358746_resume, NULL);
> > > > > +
> > > > > +static const struct of_device_id __maybe_unused tc358746_of_match[] = {
> > > > > +	{ .compatible = "toshiba,tc358746" },
> > > > > +	{ },
> > > > > +};
> > > > > +MODULE_DEVICE_TABLE(of, tc358746_of_match);
> > > > > +
> > > > > +static struct i2c_driver tc358746_driver = {
> > > > > +	.driver = {
> > > > > +		.name = "tc358746",
> > > > > +		.pm = pm_ptr(&tc358746_pm_ops),
> > > > > +		.of_match_table = tc358746_of_match,
> > > > > +	},
> > > > > +	.probe_new = tc358746_probe,
> > > > > +	.remove = tc358746_remove,
> > > > > +};
> > > > > +
> > > > > +module_i2c_driver(tc358746_driver);
> > > > > +
> > > > > +MODULE_DESCRIPTION("Toshiba TC358746 Parallel to CSI-2 bridge driver");
> > > > > +MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
> > > > > +MODULE_LICENSE("GPL");
diff mbox series

Patch

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 7806d4b81716..aefb9c9e0c08 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1272,6 +1272,23 @@  config VIDEO_TC358743_CEC
 	  When selected the tc358743 will support the optional
 	  HDMI CEC feature.
 
+config VIDEO_TC358746
+	tristate "Toshiba TC358746 parallel-CSI2 bridge"
+	depends on VIDEO_DEV && I2C
+	select VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	select V4L2_FWNODE
+	select GENERIC_PHY_MIPI_DPHY
+	select REGMAP_I2C
+	select COMMON_CLK
+	help
+	  Support for the Toshiba TC358746 parallel to MIPI CSI-2 bridge.
+	  The bridge can work in both directions but currently only the
+	  parallel-in / csi-out path is supported.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tc358746.
+
 config VIDEO_TVP514X
 	tristate "Texas Instruments TVP514x video decoder"
 	depends on VIDEO_DEV && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 0a2933103dd9..d1096c2ab480 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -118,6 +118,7 @@  obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
 obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
 obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
 obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
+obj-$(CONFIG_VIDEO_TC358746) += tc358746.o
 obj-$(CONFIG_VIDEO_TDA1997X) += tda1997x.o
 obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
 obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
diff --git a/drivers/media/i2c/tc358746.c b/drivers/media/i2c/tc358746.c
new file mode 100644
index 000000000000..7b71d0cf72a9
--- /dev/null
+++ b/drivers/media/i2c/tc358746.c
@@ -0,0 +1,1645 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TC358746 - Parallel <-> CSI-2 Bridge
+ *
+ * Copyright 2022 Marco Felsch <kernel@pengutronix.de>
+ *
+ * Notes:
+ *  - Currently only 'Parallel-in -> CSI-out' mode is supported!
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy/phy-mipi-dphy.h>
+#include <linux/property.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+
+/* 16-bit registers */
+#define CHIPID_REG			0x0000
+#define		CHIPID			GENMASK(15, 8)
+
+#define SYSCTL_REG			0x0002
+#define		SRESET			BIT(0)
+
+#define CONFCTL_REG			0x0004
+#define		PDATAF_MASK		GENMASK(9, 8)
+#define		PDATAF_MODE0		0
+#define		PDATAF_MODE1		1
+#define		PDATAF_MODE2		2
+#define		PDATAF(val)		FIELD_PREP(PDATAF_MASK, (val))
+#define		PPEN			BIT(6)
+#define		DATALANE_MASK		GENMASK(1, 0)
+
+#define FIFOCTL_REG			0x0006
+#define DATAFMT_REG			0x0008
+#define		PDFMT(val)		FIELD_PREP(GENMASK(7, 4), (val))
+
+#define MCLKCTL_REG			0x000c
+#define		MCLK_HIGH_MASK		GENMASK(15, 8)
+#define		MCLK_LOW_MASK		GENMASK(7, 0)
+#define		MCLK_HIGH(val)		FIELD_PREP(MCLK_HIGH_MASK, (val))
+#define		MCLK_LOW(val)		FIELD_PREP(MCLK_LOW_MASK, (val))
+
+#define PLLCTL0_REG			0x0016
+#define		PLL_PRD_MASK		GENMASK(15, 12)
+#define		PLL_PRD(val)		FIELD_PREP(PLL_PRD_MASK, (val))
+#define		PLL_FBD_MASK		GENMASK(8, 0)
+#define		PLL_FBD(val)		FIELD_PREP(PLL_FBD_MASK, (val))
+
+#define PLLCTL1_REG			0x0018
+#define		PLL_FRS_MASK		GENMASK(11, 10)
+#define		PLL_FRS(val)		FIELD_PREP(PLL_FRS_MASK, (val))
+#define		CKEN			BIT(4)
+#define		RESETB			BIT(1)
+#define		PLL_EN			BIT(0)
+
+#define CLKCTL_REG			0x0020
+#define		MCLKDIV_MASK		GENMASK(3, 2)
+#define		MCLKDIV(val)		FIELD_PREP(MCLKDIV_MASK, (val))
+#define		MCLKDIV_8		0
+#define		MCLKDIV_4		1
+#define		MCLKDIV_2		2
+
+#define WORDCNT_REG			0x0022
+#define PP_MISC_REG			0x0032
+#define		FRMSTOP			BIT(15)
+#define		RSTPTR			BIT(14)
+
+/* 32-bit registers */
+#define CLW_DPHYCONTTX_REG		0x0100
+#define CLW_CNTRL_REG			0x0140
+#define D0W_CNTRL_REG			0x0144
+#define		LANEDISABLE		BIT(0)
+
+#define STARTCNTRL_REG			0x0204
+#define		START			BIT(0)
+
+#define LINEINITCNT_REG			0x0210
+#define LPTXTIMECNT_REG			0x0214
+#define TCLK_HEADERCNT_REG		0x0218
+#define		TCLK_ZEROCNT(val)	FIELD_PREP(GENMASK(15, 8), (val))
+#define		TCLK_PREPARECNT(val)	FIELD_PREP(GENMASK(6, 0), (val))
+
+#define TCLK_TRAILCNT_REG		0x021C
+#define THS_HEADERCNT_REG		0x0220
+#define		THS_ZEROCNT(val)	FIELD_PREP(GENMASK(14, 8), (val))
+#define		THS_PREPARECNT(val)	FIELD_PREP(GENMASK(6, 0), (val))
+
+#define TWAKEUP_REG			0x0224
+#define TCLK_POSTCNT_REG		0x0228
+#define THS_TRAILCNT_REG		0x022C
+#define HSTXVREGEN_REG			0x0234
+#define TXOPTIONCNTRL_REG		0x0238
+#define CSI_CONTROL_REG			0x040C
+#define		CSI_MODE		BIT(15)
+#define		TXHSMD			BIT(7)
+#define		NOL(val)		FIELD_PREP(GENMASK(2, 1), (val))
+
+#define CSI_CONFW_REG			0x0500
+#define		MODE(val)		FIELD_PREP(GENMASK(31, 29), (val))
+#define		MODE_SET		0x5
+#define		ADDRESS(val)		FIELD_PREP(GENMASK(28, 24), (val))
+#define		CSI_CONTROL_ADDRESS	0x3
+#define		DATA(val)		FIELD_PREP(GENMASK(15, 0), (val))
+
+#define CSI_START_REG			0x0518
+#define		STRT			BIT(0)
+
+static const struct v4l2_mbus_framefmt tc358746_def_fmt = {
+	.width		= 640,
+	.height		= 480,
+	.code		= MEDIA_BUS_FMT_UYVY8_2X8,
+	.field		= V4L2_FIELD_NONE,
+	.colorspace	= V4L2_COLORSPACE_DEFAULT,
+	.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
+	.quantization	= V4L2_QUANTIZATION_DEFAULT,
+	.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
+};
+
+static const char * const tc358746_supplies[] = {
+	"vddc", "vddio", "vddmipi"
+};
+
+enum {
+	TC358746_SINK,
+	TC358746_SOURCE,
+	TC358746_NR_PADS
+};
+
+struct tc358746 {
+	struct v4l2_subdev		sd;
+	struct media_pad		pads[TC358746_NR_PADS];
+	struct v4l2_async_notifier	notifier;
+	struct v4l2_mbus_framefmt	mbusfmt;
+	struct v4l2_fwnode_endpoint	csi_vep;
+
+	struct v4l2_ctrl_handler	ctrl_hdl;
+
+	struct regmap			*regmap;
+	struct clk			*refclk;
+	struct gpio_desc		*reset_gpio;
+	struct regulator_bulk_data	supplies[ARRAY_SIZE(tc358746_supplies)];
+
+	struct clk_hw			mclk_hw;
+	unsigned long			mclk_rate;
+	u8				mclk_prediv;
+	u16				mclk_postdiv;
+
+	unsigned long			pll_rate;
+	u8				pll_post_div;
+	u16				pll_pre_div;
+	u16				pll_mul;
+
+	struct v4l2_ctrl		*sensor_pclk_ctrl;
+
+#define TC358746_VB_MAX_SIZE		(511 * 32)
+#define TC358746_VB_DEFAULT_SIZE	  (1 * 32)
+	unsigned int			vb_size; /* Video buffer size in bits */
+
+	struct phy_configure_opts_mipi_dphy dphy_cfg;
+};
+
+static inline struct tc358746 *to_tc358746(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct tc358746, sd);
+}
+
+static inline struct tc358746 *clk_hw_to_tc358746(struct clk_hw *hw)
+{
+	return container_of(hw, struct tc358746, mclk_hw);
+}
+
+struct tc358746_format {
+	u32		code;
+	bool		csi_format;
+	unsigned char	bus_width;
+	unsigned char	bpp;
+	/* Register values */
+	u8		pdformat; /* Peripheral Data Format */
+	u8		pdataf;   /* Parallel Data Format Option */
+};
+
+enum {
+	PDFORMAT_RAW8 = 0,
+	PDFORMAT_RAW10,
+	PDFORMAT_RAW12,
+	PDFORMAT_RGB888,
+	PDFORMAT_RGB666,
+	PDFORMAT_RGB565,
+	PDFORMAT_YUV422_8BIT,
+	/* RESERVED = 7 */
+	PDFORMAT_RAW14 = 8,
+	PDFORMAT_YUV422_10BIT,
+	PDFORMAT_YUV444,
+};
+
+/* Check tc358746_src_mbus_code() if you add new formats */
+static const struct tc358746_format tc358746_formats[] = {
+	{
+		.code = MEDIA_BUS_FMT_UYVY8_2X8,
+		.bus_width = 8,
+		.bpp = 16,
+		.pdformat = PDFORMAT_YUV422_8BIT,
+		.pdataf = PDATAF_MODE0,
+	}, {
+		.code = MEDIA_BUS_FMT_UYVY8_1X16,
+		.csi_format = true,
+		.bus_width = 16,
+		.bpp = 16,
+		.pdformat = PDFORMAT_YUV422_8BIT,
+		.pdataf = PDATAF_MODE1,
+	}, {
+		.code = MEDIA_BUS_FMT_YUYV8_1X16,
+		.csi_format = true,
+		.bus_width = 16,
+		.bpp = 16,
+		.pdformat = PDFORMAT_YUV422_8BIT,
+		.pdataf = PDATAF_MODE2,
+	}, {
+		.code = MEDIA_BUS_FMT_UYVY10_2X10,
+		.bus_width = 10,
+		.bpp = 20,
+		.pdformat = PDFORMAT_YUV422_10BIT,
+		.pdataf = PDATAF_MODE0, /* don't care */
+	}, {
+		/* in datasheet listed as YUV444 */
+		.code = MEDIA_BUS_FMT_GBR888_1X24,
+		.csi_format = true,
+		.bus_width = 24,
+		.bpp = 24,
+		.pdformat = PDFORMAT_YUV444,
+		.pdataf = PDATAF_MODE0, /* don't care */
+	},
+};
+
+/* Get n-th format for pad */
+static const struct tc358746_format *
+tc358746_get_format_by_idx(unsigned int pad, unsigned int index)
+{
+	unsigned int idx = 0;
+	unsigned int i;
+
+	if (pad >= TC358746_NR_PADS)
+		return ERR_PTR(-EINVAL);
+
+	for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) {
+		const struct tc358746_format *fmt = &tc358746_formats[i];
+
+		if ((pad == TC358746_SOURCE && fmt->csi_format) ||
+		    (pad == TC358746_SINK)) {
+			if (idx == index)
+				return fmt;
+			idx++;
+		}
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static const struct tc358746_format *
+tc358746_get_format_by_code(unsigned int pad, u32 code)
+{
+	unsigned int i;
+
+	if (pad >= TC358746_NR_PADS)
+		return ERR_PTR(-EINVAL);
+
+	for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) {
+		const struct tc358746_format *fmt = &tc358746_formats[i];
+
+		if (pad == TC358746_SINK && fmt->code == code)
+			return fmt;
+
+		if (pad == TC358746_SOURCE && fmt->csi_format &&
+		    fmt->code == code)
+			return fmt;
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static u32 tc358746_src_mbus_code(u32 code)
+{
+	switch (code) {
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+		return MEDIA_BUS_FMT_UYVY8_1X16;
+	case MEDIA_BUS_FMT_UYVY10_2X10:
+		return MEDIA_BUS_FMT_UYVY10_1X20;
+	default:
+		return code;
+	}
+}
+
+static bool tc358746_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case SYSCTL_REG ... CSI_START_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool tc358746_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CHIPID_REG ... CSI_START_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config tc358746_regmap_config = {
+	.name = "tc358746",
+	.reg_bits = 16,
+	.val_bits = 16,
+	.max_register = CSI_START_REG,
+	.writeable_reg = tc358746_writeable_reg,
+	.readable_reg = tc358746_readable_reg,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+};
+
+static int tc358746_write(struct tc358746 *tc358746, u32 reg, u32 val)
+{
+	size_t count;
+
+	/* 32-bit registers starting from CLW_DPHYCONTTX */
+	count = reg < CLW_DPHYCONTTX_REG ? 1 : 2;
+
+	return regmap_bulk_write(tc358746->regmap, reg, &val, count);
+}
+
+static int tc358746_read(struct tc358746 *tc358746, u32 reg, u32 *val)
+{
+	size_t count;
+
+	/* 32-bit registers starting from CLW_DPHYCONTTX */
+	count = reg < CLW_DPHYCONTTX_REG ? 1 : 2;
+	*val = 0;
+
+	return regmap_bulk_read(tc358746->regmap, reg, val, count);
+}
+
+static int
+tc358746_update_bits(struct tc358746 *tc358746, u32 reg, u32 mask, u32 val)
+{
+	u32 tmp, orig;
+	int err;
+
+	err = tc358746_read(tc358746, reg, &orig);
+	if (err)
+		return err;
+
+	tmp = orig & ~mask;
+	tmp |= val & mask;
+
+	return tc358746_write(tc358746, reg, tmp);
+}
+
+static int tc358746_set_bits(struct tc358746 *tc358746, u32 reg, u32 bits)
+{
+	return tc358746_update_bits(tc358746, reg, bits, bits);
+}
+
+static int tc358746_clear_bits(struct tc358746 *tc358746, u32 reg, u32 bits)
+{
+	return tc358746_update_bits(tc358746, reg, bits, 0);
+}
+
+static int tc358746_sw_reset(struct tc358746 *tc358746)
+{
+	int err;
+
+	err = tc358746_set_bits(tc358746, SYSCTL_REG, SRESET);
+	if (err)
+		return err;
+
+	udelay(10);
+
+	return tc358746_clear_bits(tc358746, SYSCTL_REG, SRESET);
+}
+
+static int
+tc358746_apply_pll_config(struct tc358746 *tc358746)
+{
+	u8 post = tc358746->pll_post_div;
+	u16 pre = tc358746->pll_pre_div;
+	u16 mul = tc358746->pll_mul;
+	u32 val, mask;
+	int err;
+
+	err = tc358746_read(tc358746, PLLCTL1_REG, &val);
+	if (err)
+		return err;
+
+	/* Don't touch the PLL if running */
+	if (FIELD_GET(PLL_EN, val) == 1)
+		return 0;
+
+	/* Pre-div and Multiplicator have a internal +1 logic */
+	val = PLL_PRD(pre - 1) | PLL_FBD(mul - 1);
+	mask = PLL_PRD_MASK | PLL_FBD_MASK;
+	err = tc358746_update_bits(tc358746, PLLCTL0_REG, mask, val);
+	if (err)
+		return err;
+
+	val = PLL_FRS(ilog2(post)) | RESETB | PLL_EN;
+	mask = PLL_FRS_MASK | RESETB | PLL_EN;
+	tc358746_update_bits(tc358746, PLLCTL1_REG, mask, val);
+	if (err)
+		return err;
+
+	udelay(1000);
+
+	return tc358746_set_bits(tc358746, PLLCTL1_REG, CKEN);
+}
+
+static int tc358746_apply_misc_config(struct tc358746 *tc358746)
+{
+	struct device *dev = tc358746->sd.dev;
+	const struct tc358746_format *fmt;
+	u32 val;
+	int err;
+
+	fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
+	if (IS_ERR(fmt))
+		return PTR_ERR(fmt);
+
+	/* Self defined CSI user data type id's are not supported yet */
+	val = PDFMT(fmt->pdformat);
+	dev_dbg(dev, "DATAFMT: 0x%x\n", val);
+	err = tc358746_write(tc358746, DATAFMT_REG, val);
+	if (err)
+		return err;
+
+	val = PDATAF(fmt->pdataf);
+	dev_dbg(dev, "CONFCTL[PDATAF]: 0x%x\n", fmt->pdataf);
+	err = tc358746_update_bits(tc358746, CONFCTL_REG, PDATAF_MASK, val);
+	if (err)
+		return err;
+
+	val = tc358746->vb_size / 32;
+	dev_dbg(dev, "FIFOCTL: %u (0x%x)\n", val, val);
+	err = tc358746_write(tc358746, FIFOCTL_REG, val);
+	if (err)
+		return err;
+
+	/* Total number of bytes for each line/width */
+	val = tc358746->mbusfmt.width * fmt->bpp / 8;
+	dev_dbg(dev, "WORDCNT: %u (0x%x)\n", val, val);
+	return tc358746_write(tc358746, WORDCNT_REG, val);
+}
+
+#ifndef MHZ
+#define MHZ		(1000 * 1000)
+#endif
+
+/* Use MHz as base so the div needs no u64 */
+static u32 tc358746_cfg_to_cnt(unsigned int cfg_val,
+			       unsigned int clk_mhz,
+			       unsigned int time_base)
+{
+	return DIV_ROUND_UP(cfg_val * clk_mhz, time_base);
+}
+
+static u32 tc358746_ps_to_cnt(unsigned int cfg_val,
+			      unsigned int clk_mhz)
+{
+	return tc358746_cfg_to_cnt(cfg_val, clk_mhz, USEC_PER_SEC);
+}
+
+static u32 tc358746_us_to_cnt(unsigned int cfg_val,
+			      unsigned int clk_mhz)
+{
+	return tc358746_cfg_to_cnt(cfg_val, clk_mhz, 1);
+}
+
+static int tc358746_apply_dphy_config(struct tc358746 *tc358746)
+{
+	struct phy_configure_opts_mipi_dphy *cfg = &tc358746->dphy_cfg;
+	bool non_cont_clk = !!(tc358746->csi_vep.bus.mipi_csi2.flags &
+			       V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK);
+	struct device *dev = tc358746->sd.dev;
+	unsigned long hs_byte_clk, hf_clk;
+	u32 val, val2, lptxcnt;
+	int err;
+
+	/* The hs_byte_clk is also called SYSCLK in the excel sheet */
+	hs_byte_clk = cfg->hs_clk_rate / 8;
+	hs_byte_clk /= MHZ;
+	hf_clk = hs_byte_clk / 2;
+
+	val = tc358746_us_to_cnt(cfg->init, hf_clk) - 1;
+	dev_dbg(dev, "LINEINITCNT: %u (0x%x)\n", val, val);
+	err = tc358746_write(tc358746, LINEINITCNT_REG, val);
+	if (err)
+		return err;
+
+	val = tc358746_ps_to_cnt(cfg->lpx, hs_byte_clk) - 1;
+	lptxcnt = val;
+	dev_dbg(dev, "LPTXTIMECNT: %u (0x%x)\n", val, val);
+	err = tc358746_write(tc358746, LPTXTIMECNT_REG, val);
+	if (err)
+		return err;
+
+	val = tc358746_ps_to_cnt(cfg->clk_prepare, hs_byte_clk) - 1;
+	val2 = tc358746_ps_to_cnt(cfg->clk_zero, hs_byte_clk) - 1;
+	dev_dbg(dev, "TCLK_PREPARECNT: %u (0x%x)\n", val, val);
+	dev_dbg(dev, "TCLK_ZEROCNT: %u (0x%x)\n", val2, val2);
+	dev_dbg(dev, "TCLK_HEADERCNT: 0x%x\n",
+		(u32)(TCLK_PREPARECNT(val) | TCLK_ZEROCNT(val2)));
+	err = tc358746_write(tc358746, TCLK_HEADERCNT_REG,
+			     TCLK_PREPARECNT(val) | TCLK_ZEROCNT(val2));
+	if (err)
+		return err;
+
+	val = tc358746_ps_to_cnt(cfg->clk_trail, hs_byte_clk);
+	dev_dbg(dev, "TCLK_TRAILCNT: %u (0x%x)\n", val, val);
+	err = tc358746_write(tc358746, TCLK_TRAILCNT_REG, val);
+	if (err)
+		return err;
+
+	val = tc358746_ps_to_cnt(cfg->hs_prepare, hs_byte_clk) - 1;
+	val2 = tc358746_ps_to_cnt(cfg->hs_zero, hs_byte_clk) - 1;
+	dev_dbg(dev, "THS_PREPARECNT: %u (0x%x)\n", val, val);
+	dev_dbg(dev, "THS_ZEROCNT: %u (0x%x)\n", val2, val2);
+	dev_dbg(dev, "THS_HEADERCNT: 0x%x\n",
+		(u32)(THS_PREPARECNT(val) | THS_ZEROCNT(val2)));
+	err = tc358746_write(tc358746, THS_HEADERCNT_REG,
+			     THS_PREPARECNT(val) | THS_ZEROCNT(val2));
+	if (err)
+		return err;
+
+	/* TWAKEUP > 1ms in lptxcnt steps */
+	val = tc358746_us_to_cnt(cfg->wakeup, hs_byte_clk);
+	val = val / (lptxcnt + 1) - 1;
+	dev_dbg(dev, "TWAKEUP: %u (0x%x)\n", val, val);
+	err = tc358746_write(tc358746, TWAKEUP_REG, val);
+	if (err)
+		return err;
+
+	val = tc358746_ps_to_cnt(cfg->clk_post, hs_byte_clk);
+	dev_dbg(dev, "TCLK_POSTCNT: %u (0x%x)\n", val, val);
+	err = tc358746_write(tc358746, TCLK_POSTCNT_REG, val);
+	if (err)
+		return err;
+
+	val = tc358746_ps_to_cnt(cfg->hs_trail, hs_byte_clk);
+	dev_dbg(dev, "THS_TRAILCNT: %u (0x%x)\n", val, val);
+	err = tc358746_write(tc358746, THS_TRAILCNT_REG, val);
+	if (err)
+		return err;
+
+	dev_dbg(dev, "CONTCLKMODE: %u", non_cont_clk ? 0 : 1);
+	return  tc358746_write(tc358746, TXOPTIONCNTRL_REG, non_cont_clk ? 0 : 1);
+}
+
+#define MAX_DATA_LANES 4
+
+static int tc358746_enable_csi_lanes(struct tc358746 *tc358746, int enable)
+{
+	unsigned int lanes = tc358746->dphy_cfg.lanes;
+	unsigned int lane;
+	u32 reg, val;
+	int err;
+
+	err = tc358746_update_bits(tc358746, CONFCTL_REG, DATALANE_MASK,
+				   lanes - 1);
+	if (err)
+		return err;
+
+	/* Clock lane */
+	val = enable ? 0 : LANEDISABLE;
+	dev_dbg(tc358746->sd.dev, "CLW_CNTRL: 0x%x\n", val);
+	err = tc358746_write(tc358746, CLW_CNTRL_REG, val);
+	if (err)
+		return err;
+
+	for (lane = 0; lane < MAX_DATA_LANES; lane++) {
+		/* Data lanes */
+		reg = D0W_CNTRL_REG + lane * 0x4;
+		val = (enable && lane < lanes) ? 0 : LANEDISABLE;
+
+		dev_dbg(tc358746->sd.dev, "D%uW_CNTRL: 0x%x\n", lane, val);
+		err = tc358746_write(tc358746, reg, val);
+		if (err)
+			return err;
+	}
+
+	val = 0;
+	if (enable) {
+		/* Clock lane */
+		val |= BIT(0);
+
+		/* Data lanes */
+		for (lane = 1; lane <= lanes; lane++)
+			val |= BIT(lane);
+	}
+
+	dev_dbg(tc358746->sd.dev, "HSTXVREGEN: 0x%x\n", val);
+	return tc358746_write(tc358746, HSTXVREGEN_REG, val);
+}
+
+static int tc358746_enable_csi_module(struct tc358746 *tc358746, int enable)
+{
+	unsigned int lanes = tc358746->dphy_cfg.lanes;
+	int err;
+
+	/*
+	 * START and STRT are only reseted/disabled by sw reset. This is
+	 * required to put the lane state back into LP-11 state. The sw reset
+	 * don't reset register values.
+	 */
+	if (!enable)
+		return tc358746_sw_reset(tc358746);
+
+	err = tc358746_write(tc358746, STARTCNTRL_REG, START);
+	if (err)
+		return err;
+
+	err = tc358746_write(tc358746, CSI_START_REG, STRT);
+	if (err)
+		return err;
+
+	/* CSI_CONTROL_REG is only indirect accessible */
+	return tc358746_write(tc358746, CSI_CONFW_REG,
+			      MODE(MODE_SET) |
+			      ADDRESS(CSI_CONTROL_ADDRESS) |
+			      DATA(CSI_MODE | TXHSMD | NOL(lanes - 1)));
+}
+
+static int tc358746_enable_parallel_port(struct tc358746 *tc358746, int enable)
+{
+	int err;
+
+	if (enable) {
+		err = tc358746_write(tc358746, PP_MISC_REG, 0);
+		if (err)
+			return err;
+
+		return tc358746_set_bits(tc358746, CONFCTL_REG, PPEN);
+	}
+
+	err = tc358746_set_bits(tc358746, PP_MISC_REG, FRMSTOP);
+	if (err)
+		return err;
+
+	err = tc358746_clear_bits(tc358746, CONFCTL_REG, PPEN);
+	if (err)
+		return err;
+
+	return tc358746_set_bits(tc358746, PP_MISC_REG, RSTPTR);
+}
+
+static inline struct v4l2_subdev *tc358746_get_remote_sd(struct media_pad *pad)
+{
+	pad = media_pad_remote_pad_first(pad);
+	if (!pad)
+		return NULL;
+
+	return media_entity_to_v4l2_subdev(pad->entity);
+}
+
+static int tc358746_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct tc358746 *tc358746 = to_tc358746(sd);
+	struct v4l2_subdev *src;
+	int err;
+
+	dev_dbg(sd->dev, "%sable\n", enable ? "en" : "dis");
+
+	src = tc358746_get_remote_sd(&tc358746->pads[TC358746_SINK]);
+	if (!src)
+		return -EPIPE;
+
+	if (enable) {
+		err = pm_runtime_resume_and_get(sd->dev);
+		if (err)
+			return err;
+
+		err = tc358746_enable_csi_lanes(tc358746, 1);
+		if (err) {
+			pm_runtime_mark_last_busy(sd->dev);
+			pm_runtime_put_sync_autosuspend(sd->dev);
+			return err;
+		}
+
+		err = tc358746_enable_csi_module(tc358746, 1);
+		if (err) {
+			pm_runtime_mark_last_busy(sd->dev);
+			pm_runtime_put_sync_autosuspend(sd->dev);
+			return err;
+		}
+
+		err = tc358746_enable_parallel_port(tc358746, 1);
+		if (err) {
+			pm_runtime_mark_last_busy(sd->dev);
+			pm_runtime_put_sync_autosuspend(sd->dev);
+			return err;
+		}
+
+		err = v4l2_subdev_call(src, video, s_stream, 1);
+		if (err) {
+			pm_runtime_mark_last_busy(sd->dev);
+			pm_runtime_put_sync_autosuspend(sd->dev);
+		}
+
+		return err;
+	}
+
+	/*
+	 * Lane disable trigger state change from LP-11 to LP-00
+	 * therefore it must happen before the CSI modile is disabled.
+	 */
+	err = tc358746_enable_csi_lanes(tc358746, 0);
+	if (err)
+		return err;
+
+	err = tc358746_enable_csi_module(tc358746, 0);
+	if (err)
+		return err;
+
+	err = tc358746_enable_parallel_port(tc358746, 0);
+	if (err)
+		return err;
+
+	pm_runtime_mark_last_busy(sd->dev);
+	pm_runtime_put_sync_autosuspend(sd->dev);
+
+	return v4l2_subdev_call(src, video, s_stream, 0);
+}
+
+static int tc358746_enum_mbus_code(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *sd_state,
+				   struct v4l2_subdev_mbus_code_enum *code)
+{
+	const struct tc358746_format *fmt;
+
+	fmt = tc358746_get_format_by_idx(code->pad, code->index);
+	if (IS_ERR(fmt))
+		return PTR_ERR(fmt);
+
+	code->code = fmt->code;
+
+	return 0;
+}
+
+static struct v4l2_mbus_framefmt *
+__tc358746_get_pad_format(struct v4l2_subdev *sd,
+			  struct v4l2_subdev_state *sd_state,
+			  unsigned int pad, u32 which)
+{
+	struct tc358746 *tc358746 = to_tc358746(sd);
+
+	switch (which) {
+	case V4L2_SUBDEV_FORMAT_TRY:
+		return v4l2_subdev_get_try_format(sd, sd_state, pad);
+	case V4L2_SUBDEV_FORMAT_ACTIVE:
+		return &tc358746->mbusfmt;
+	default:
+		return NULL;
+	}
+}
+
+static int tc358746_get_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_state *sd_state,
+			    struct v4l2_subdev_format *format)
+{
+	struct tc358746 *tc358746 = to_tc358746(sd);
+
+	if (format->pad >= TC358746_NR_PADS)
+		return -EINVAL;
+
+	format->format = tc358746->mbusfmt;
+	if (format->pad == TC358746_SOURCE)
+		format->format.code = tc358746_src_mbus_code(tc358746->mbusfmt.code);
+
+	return 0;
+}
+
+static int tc358746_set_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_state *sd_state,
+			    struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *mbusformat;
+	const struct tc358746_format *fmt;
+
+	if (format->pad >= TC358746_NR_PADS)
+		return -EINVAL;
+
+	/* The src follows the properties from the sink */
+	if (format->pad == TC358746_SOURCE)
+		return tc358746_get_fmt(sd, sd_state, format);
+
+	mbusformat = __tc358746_get_pad_format(sd, sd_state, format->pad,
+					       format->which);
+	if (!mbusformat)
+		return -EINVAL;
+
+	fmt = tc358746_get_format_by_code(format->pad, format->format.code);
+	if (IS_ERR(fmt))
+		fmt = tc358746_get_format_by_code(format->pad, tc358746_def_fmt.code);
+
+	format->format.code = fmt->code;
+	format->format.field = V4L2_FIELD_NONE;
+
+	dev_dbg(sd->dev, "Update format: %ux%u code:0x%x -> %ux%u code:0x%x",
+		mbusformat->width, mbusformat->height, mbusformat->code,
+		format->format.width, format->format.height, format->format.code);
+
+	*mbusformat = format->format;
+
+	return 0;
+}
+
+static unsigned long tc358746_find_pll_settings(struct tc358746 *tc358746,
+						unsigned long refclk,
+						unsigned long fout)
+
+{
+	struct device *dev = tc358746->sd.dev;
+	unsigned long best_freq = 0;
+	u32 min_delta = 0xffffffff;
+	u16 prediv_max = 17;
+	u16 prediv_min = 1;
+	u16 m_best, mul;
+	u16 p_best, p;
+	u8 postdiv;
+
+	if (fout > 1000 * MHZ) {
+		dev_err(dev, "HS-Clock above 1 Ghz are not supported\n");
+		return 0;
+	} else if (fout >= 500 * MHZ)
+		postdiv = 1;
+	else if (fout >= 250 * MHZ)
+		postdiv = 2;
+	else if (fout >= 125 * MHZ)
+		postdiv = 4;
+	else
+		postdiv = 8;
+
+	for (p = prediv_min; p <= prediv_max; p++) {
+		unsigned long delta, fin;
+		u64 tmp;
+
+		fin = DIV_ROUND_CLOSEST(refclk, p);
+		if (fin < 4 * MHZ || fin > 40 * MHZ)
+			continue;
+
+		tmp = fout * p * postdiv;
+		do_div(tmp, fin);
+		mul = tmp;
+		if (mul > 511)
+			continue;
+
+		tmp = mul * fin;
+		do_div(tmp, p * postdiv);
+
+		delta = abs(fout - tmp);
+		if (delta < min_delta) {
+			p_best = p;
+			m_best = mul;
+			min_delta = delta;
+			best_freq = tmp;
+		};
+
+		if (delta == 0)
+			break;
+	};
+
+	if (!best_freq) {
+		dev_err(dev, "Failed find PLL frequency\n");
+		return 0;
+	}
+
+	tc358746->pll_post_div = postdiv;
+	tc358746->pll_pre_div = p_best;
+	tc358746->pll_mul = m_best;
+
+	if (best_freq != fout)
+		dev_warn(dev, "Request PLL freq:%lu, found PLL freq:%lu\n",
+			 fout, best_freq);
+
+	dev_dbg(dev, "Found PLL settings: freq:%lu prediv:%u multi:%u postdiv:%u\n",
+		best_freq, p_best, m_best, postdiv);
+
+	return best_freq;
+}
+
+#define TC358746_PRECISION 10
+
+static int
+tc358746_link_validate(struct v4l2_subdev *sd, struct media_link *link,
+		       struct v4l2_subdev_format *source_fmt,
+		       struct v4l2_subdev_format *sink_fmt)
+{
+	struct tc358746 *tc358746 = to_tc358746(sd);
+	unsigned long csi_bitrate, sensor_bitrate;
+	const struct tc358746_format *fmt;
+	unsigned int fifo_sz, tmp, n;
+	s64 sensor_pclk_rate;
+
+	/* Check the FIFO settings */
+	fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
+	if (IS_ERR(fmt))
+		return PTR_ERR(fmt);
+
+	sensor_pclk_rate = v4l2_ctrl_g_ctrl_int64(tc358746->sensor_pclk_ctrl);
+	sensor_bitrate = sensor_pclk_rate * fmt->bus_width;
+
+	csi_bitrate = tc358746->dphy_cfg.lanes * tc358746->pll_rate;
+
+	dev_dbg(tc358746->sd.dev,
+		"Fifo settings params: sensor-bitrate:%lu csi-bitrate:%lu",
+		sensor_bitrate, csi_bitrate);
+
+	/* Avoid possible FIFO overflows */
+	if (csi_bitrate < sensor_bitrate) {
+		dev_err(sd->dev,
+			"Link validation failed csi-bitrate:%lu < sensor-bitrate:%lu\n",
+			csi_bitrate, sensor_bitrate);
+		return -EINVAL;
+	}
+
+	/* Best case */
+	if (csi_bitrate == sensor_bitrate) {
+		tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
+		goto out;
+	}
+
+	/*
+	 * Avoid possible FIFO underflow in case of
+	 * csi_bitrate > sensor_bitrate. For such case the chip has a internal
+	 * fifo which can be used to delay the line output.
+	 *
+	 * Fifo size calculation:
+	 *
+	 * fifo-sz, image-width - in bits
+	 * sbr                  - sensor_bitrate in bits/s
+	 * csir                 - csi_bitrate in bits/s
+	 *
+	 *                1             1      1
+	 * image-width * --- + fifo-sz --- >= ---- * image-width
+	 *               sbr           sbr    csir
+	 *
+	 * fifo-sz >= abs(sbr/csir * image-width - image-width)
+	 *                `-----´
+	 *                   n
+	 *
+	 */
+
+	sensor_bitrate /= TC358746_PRECISION;
+	n = csi_bitrate / sensor_bitrate;
+	tmp = (tc358746->mbusfmt.width * TC358746_PRECISION) / n;
+	fifo_sz = tc358746->mbusfmt.width - tmp;
+	fifo_sz *= fmt->bpp;
+	tc358746->vb_size = round_up(fifo_sz, 32);
+
+out:
+	dev_dbg(tc358746->sd.dev,
+		"Found FIFO size[bits]:%u -> aligned to size[bits]:%u\n",
+		fifo_sz, tc358746->vb_size);
+
+	return tc358746->vb_size > TC358746_VB_MAX_SIZE ? -EINVAL : 0;
+}
+
+static int tc358746_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
+				    struct v4l2_mbus_config *config)
+{
+	struct tc358746 *tc358746 = to_tc358746(sd);
+
+	if (pad != TC358746_SOURCE)
+		return -EINVAL;
+
+	config->type = V4L2_MBUS_CSI2_DPHY;
+	config->bus.mipi_csi2 = tc358746->csi_vep.bus.mipi_csi2;
+
+	return 0;
+}
+
+static int tc358746_link_setup(struct media_entity *entity,
+			       const struct media_pad *local,
+			       const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct v4l2_subdev *sensor_sd =
+		media_entity_to_v4l2_subdev(remote->entity);
+	struct tc358746 *tc358746 = to_tc358746(sd);
+	struct device *dev = sd->dev;
+	struct v4l2_ctrl *ctrl;
+
+	/* no special requirements on source pads */
+	if (local->flags & MEDIA_PAD_FL_SOURCE)
+		return 0;
+
+	dev_dbg(dev, "link setup '%s':%d->'%s':%d[%d]",
+		remote->entity->name, remote->index, local->entity->name,
+		local->index, flags & MEDIA_LNK_FL_ENABLED);
+
+	/* Required for the fifo calculation */
+	ctrl = v4l2_ctrl_find(sensor_sd->ctrl_handler, V4L2_CID_PIXEL_RATE);
+	if (!ctrl) {
+		dev_err(dev, "Subdev [%s] must support V4L2_CID_PIXEL_RATE\n",
+			sensor_sd->name);
+		return -EINVAL;
+	}
+	tc358746->sensor_pclk_ctrl = ctrl;
+
+	return 0;
+}
+
+int __maybe_unused
+tc358746_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+	struct tc358746 *tc358746 = to_tc358746(sd);
+
+	/* 32-bit registers starting from CLW_DPHYCONTTX */
+	reg->size = reg->reg < CLW_DPHYCONTTX_REG ? 2 : 4;
+
+	if (pm_runtime_resume_and_get(sd->dev)) {
+		dev_err(sd->dev, "Failed to resume the device\n");
+		return 0;
+	}
+
+	tc358746_read(tc358746, reg->reg, (u32 *)&reg->val);
+
+	pm_runtime_mark_last_busy(sd->dev);
+	pm_runtime_put_sync_autosuspend(sd->dev);
+
+	return 0;
+}
+
+int __maybe_unused
+tc358746_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
+{
+	struct tc358746 *tc358746 = to_tc358746(sd);
+
+	if (pm_runtime_resume_and_get(sd->dev)) {
+		dev_err(sd->dev, "Failed to resume the device\n");
+		return 0;
+	}
+
+	tc358746_write(tc358746, (u32)reg->reg, (u32)reg->val);
+
+	pm_runtime_mark_last_busy(sd->dev);
+	pm_runtime_put_sync_autosuspend(sd->dev);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops tc358746_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = tc358746_g_register,
+	.s_register = tc358746_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops tc358746_video_ops = {
+	.s_stream = tc358746_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops tc358746_pad_ops = {
+	.enum_mbus_code = tc358746_enum_mbus_code,
+	.set_fmt = tc358746_set_fmt,
+	.get_fmt = tc358746_get_fmt,
+	.link_validate = tc358746_link_validate,
+	.get_mbus_config = tc358746_get_mbus_config,
+};
+
+static const struct v4l2_subdev_ops tc358746_ops = {
+	.core = &tc358746_core_ops,
+	.video = &tc358746_video_ops,
+	.pad = &tc358746_pad_ops,
+};
+
+static const struct media_entity_operations tc358746_entity_ops = {
+	.get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
+	.link_setup = tc358746_link_setup,
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static int tc358746_mclk_enable(struct clk_hw *hw)
+{
+	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
+	unsigned int div;
+	u32 val;
+	int err;
+
+	div = tc358746->mclk_postdiv / 2;
+	val = MCLK_HIGH(div - 1) | MCLK_LOW(div - 1);
+	dev_dbg(tc358746->sd.dev, "MCLKCTL: %u (0x%x)\n", val, val);
+	err = tc358746_write(tc358746, MCLKCTL_REG, val);
+	if (err)
+		return err;
+
+	if (tc358746->mclk_prediv == 8)
+		val = MCLKDIV(MCLKDIV_8);
+	else if (tc358746->mclk_prediv == 4)
+		val = MCLKDIV(MCLKDIV_4);
+	else
+		val = MCLKDIV(MCLKDIV_2);
+
+	dev_dbg(tc358746->sd.dev, "CLKCTL[MCLKDIV]: %u (0x%x)\n", val, val);
+	return tc358746_update_bits(tc358746, CLKCTL_REG, MCLKDIV_MASK, val);
+}
+
+static void tc358746_mclk_disable(struct clk_hw *hw)
+{
+	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
+
+	tc358746_write(tc358746, MCLKCTL_REG, 0);
+}
+
+static long
+tc358746_find_mclk_settings(struct tc358746 *tc358746, unsigned long mclk_rate)
+{
+	unsigned long pll_rate = tc358746->pll_rate;
+	const unsigned char prediv[] = { 2, 4, 8 };
+	unsigned int mclk_prediv, mclk_postdiv;
+	struct device *dev = tc358746->sd.dev;
+	unsigned int postdiv, mclkdiv;
+	unsigned long best_mclk_rate;
+	unsigned int i;
+
+	/*
+	 *                          MCLK-Div
+	 *           -------------------´`---------------------
+	 *          ´                                          `
+	 *         +-------------+     +------------------------+
+	 *         | MCLK-PreDiv |     |       MCLK-PostDiv     |
+	 * PLL --> |   (2/4/8)   | --> | (mclk_low + mclk_high) | --> MCLK
+	 *         +-------------+     +------------------------+
+	 *
+	 * The register value of mclk_low/high is mclk_low/high+1, i.e.:
+	 *   mclk_low/high = 1   --> 2 MCLK-Ref Counts
+	 *   mclk_low/high = 255 --> 256 MCLK-Ref Counts == max.
+	 * If mclk_low and mclk_high are 0 then MCLK is disabled.
+	 *
+	 * Keep it simple and support 50/50 duty cycles only for now,
+	 * so the calc will be:
+	 *
+	 *   MCLK = PLL / (MCLK-PreDiv * 2 * MCLK-PostDiv)
+	 */
+
+	if (mclk_rate == tc358746->mclk_rate)
+		return mclk_rate;
+
+	/* Highest possible rate */
+	mclkdiv = pll_rate / mclk_rate;
+	if (mclkdiv <= 8) {
+		mclk_prediv = 2;
+		mclk_postdiv = 4;
+		best_mclk_rate = pll_rate / (2 * 4);
+		goto out;
+	}
+
+	/* First check the prediv */
+	for (i = 0; i < ARRAY_SIZE(prediv); i++) {
+		postdiv = mclkdiv / prediv[i];
+
+		if (postdiv % 2)
+			continue;
+
+		if (postdiv >= 4 && postdiv <= 512) {
+			mclk_prediv = prediv[i];
+			mclk_postdiv = postdiv;
+			best_mclk_rate = pll_rate / (prediv[i] * postdiv);
+			goto out;
+		}
+	}
+
+	/* No suitable prediv found, so try to adjust the postdiv */
+	for (postdiv = 4; postdiv <= 512; postdiv += 2) {
+		unsigned int pre;
+
+		pre = mclkdiv / postdiv;
+		if (pre == 2 || pre == 4 || pre == 8) {
+			mclk_prediv = pre;
+			mclk_postdiv = postdiv;
+			best_mclk_rate = pll_rate / (pre * postdiv);
+			goto out;
+		}
+	}
+
+	/* The MCLK <-> PLL gap is to high -> use largest possible div */
+	mclk_prediv = 8;
+	mclk_postdiv = 512;
+	best_mclk_rate = pll_rate / (8 * 512);
+
+out:
+	tc358746->mclk_prediv = mclk_prediv;
+	tc358746->mclk_postdiv = mclk_postdiv;
+	tc358746->mclk_rate = best_mclk_rate;
+
+	if (best_mclk_rate != mclk_rate)
+		dev_warn(dev, "Request MCLK freq:%lu, found MCLK freq:%lu\n",
+			 mclk_rate, best_mclk_rate);
+
+	dev_dbg(dev, "Found MCLK settings: freq:%lu prediv:%u postdiv:%u\n",
+		best_mclk_rate, mclk_prediv, mclk_postdiv);
+
+	return best_mclk_rate;
+}
+
+unsigned long tc358746_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
+	unsigned int prediv, postdiv;
+	u32 val;
+	int err;
+
+	err = tc358746_read(tc358746, MCLKCTL_REG, &val);
+	if (err)
+		return 0;
+
+	postdiv = FIELD_GET(MCLK_LOW_MASK, val) + 1;
+	postdiv += FIELD_GET(MCLK_HIGH_MASK, val) + 1;
+
+	err = tc358746_read(tc358746, CLKCTL_REG, &val);
+	if (err)
+		return 0;
+
+	prediv = FIELD_GET(MCLKDIV_MASK, val);
+	if (prediv == MCLKDIV_8)
+		prediv = 8;
+	else if (prediv == MCLKDIV_4)
+		prediv = 4;
+	else
+		prediv = 2;
+
+	return tc358746->pll_rate / (prediv * postdiv);
+}
+
+static long tc358746_mclk_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *parent_rate)
+{
+	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
+
+	*parent_rate = tc358746->pll_rate;
+
+	return tc358746_find_mclk_settings(tc358746, rate);
+}
+
+static int tc358746_mclk_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long parent_rate)
+{
+	struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
+
+	tc358746_find_mclk_settings(tc358746, rate);
+
+	return tc358746_mclk_enable(hw);
+}
+
+static const struct clk_ops tc358746_mclk_ops = {
+	.enable = tc358746_mclk_enable,
+	.disable = tc358746_mclk_disable,
+	.recalc_rate = tc358746_recalc_rate,
+	.round_rate = tc358746_mclk_round_rate,
+	.set_rate = tc358746_mclk_set_rate,
+};
+
+static int tc358746_notify_bound(struct v4l2_async_notifier *notifier,
+				 struct v4l2_subdev *sd,
+				 struct v4l2_async_subdev *asd)
+{
+	struct tc358746 *tc358746 =
+		container_of(notifier, struct tc358746, notifier);
+	struct media_pad *sink = &tc358746->pads[TC358746_SINK];
+
+	return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED);
+}
+
+static const struct v4l2_async_notifier_operations tc358746_notify_ops = {
+	.bound = tc358746_notify_bound,
+};
+
+static int tc358746_async_register(struct tc358746 *tc358746)
+{
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_PARALLEL,
+	};
+	struct v4l2_async_subdev *asd;
+	struct fwnode_handle *ep;
+	int err;
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(tc358746->sd.dev),
+					     TC358746_SINK, 0, 0);
+	if (!ep)
+		return -ENOTCONN;
+
+	err = v4l2_fwnode_endpoint_parse(ep, &vep);
+	if (err) {
+		fwnode_handle_put(ep);
+		return err;
+	}
+
+	v4l2_async_nf_init(&tc358746->notifier);
+	asd = v4l2_async_nf_add_fwnode_remote(&tc358746->notifier, ep,
+					      struct v4l2_async_subdev);
+	if (IS_ERR(asd)) {
+		fwnode_handle_put(ep);
+		return PTR_ERR(asd);
+	}
+
+	fwnode_handle_put(ep);
+
+	tc358746->notifier.ops = &tc358746_notify_ops;
+
+	err = v4l2_async_subdev_nf_register(&tc358746->sd, &tc358746->notifier);
+	if (err) {
+		v4l2_async_nf_cleanup(&tc358746->notifier);
+		return err;
+	}
+
+	tc358746->sd.fwnode = fwnode_graph_get_endpoint_by_id(
+		dev_fwnode(tc358746->sd.dev), TC358746_SOURCE, 0, 0);
+
+	err = v4l2_async_register_subdev(&tc358746->sd);
+	if (err) {
+		v4l2_async_nf_unregister(&tc358746->notifier);
+		v4l2_async_nf_cleanup(&tc358746->notifier);
+	}
+
+	return err;
+}
+
+static int tc358746_probe(struct i2c_client *client)
+{
+	struct clk_init_data mclk_initdata = { };
+	struct device *dev = &client->dev;
+	struct v4l2_fwnode_endpoint *vep;
+	unsigned long csi_link_rate;
+	struct tc358746 *tc358746;
+	struct fwnode_handle *ep;
+	unsigned char csi_lanes;
+	struct v4l2_subdev *sd;
+	struct v4l2_ctrl *ctrl;
+	unsigned long refclk;
+	unsigned int i;
+	int err;
+	u32 val;
+
+	tc358746 = devm_kzalloc(&client->dev, sizeof(*tc358746), GFP_KERNEL);
+	if (!tc358746)
+		return -ENOMEM;
+
+	tc358746->regmap = devm_regmap_init_i2c(client, &tc358746_regmap_config);
+	if (IS_ERR(tc358746->regmap))
+		return dev_err_probe(dev, PTR_ERR(tc358746->regmap),
+				     "Failed to init regmap\n");
+
+	tc358746->refclk = devm_clk_get(dev, "refclk");
+	if (IS_ERR(tc358746->refclk))
+		return dev_err_probe(dev, PTR_ERR(tc358746->refclk),
+				     "Failed to get refclk\n");
+
+	err = clk_prepare_enable(tc358746->refclk);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to enable refclk\n");
+
+	refclk = clk_get_rate(tc358746->refclk);
+	clk_disable_unprepare(tc358746->refclk);
+
+	if (refclk < 6 * MHZ || refclk > 40 * MHZ)
+		return dev_err_probe(dev, -EINVAL, "Invalid refclk range\n");
+
+	for (i = 0; i < ARRAY_SIZE(tc358746_supplies); i++)
+		tc358746->supplies[i].supply = tc358746_supplies[i];
+
+	err = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc358746_supplies),
+				      tc358746->supplies);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to get supplies\n");
+
+	tc358746->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						       GPIOD_OUT_HIGH);
+	if (IS_ERR(tc358746->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(tc358746->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	sd = &tc358746->sd;
+	v4l2_i2c_subdev_init(sd, client, &tc358746_ops);
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	sd->entity.ops = &tc358746_entity_ops;
+
+	tc358746->pads[TC358746_SINK].flags = MEDIA_PAD_FL_SINK;
+	tc358746->pads[TC358746_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+	err = media_entity_pads_init(&sd->entity, TC358746_NR_PADS,
+				     tc358746->pads);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to setup media-entity pads\n");
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), TC358746_SOURCE,
+					     0, 0);
+	if (!ep) {
+		dev_err(dev, "Missing endpoint node\n");
+		err = -EINVAL;
+		goto err_mc;
+	}
+
+	/* Currently we only support 'parallel in' -> 'csi out' */
+	vep = &tc358746->csi_vep;
+	vep->bus_type = V4L2_MBUS_CSI2_DPHY;
+	err = v4l2_fwnode_endpoint_alloc_parse(ep, vep);
+	fwnode_handle_put(ep);
+	if (err) {
+		dev_err(dev, "Failed to parse source endpoint\n");
+		goto err_mc;
+	}
+
+	csi_lanes = vep->bus.mipi_csi2.num_data_lanes;
+	if (csi_lanes == 0 || csi_lanes > 4 ||
+	    vep->nr_of_link_frequencies == 0) {
+		dev_err(dev, "error: Invalid CSI-2 settings\n");
+		err = -EINVAL;
+		goto err_vep;
+	}
+
+	/* TODO: Add support to handle multiple link frequencies */
+	csi_link_rate = (unsigned long)vep->link_frequencies[0];
+	tc358746->pll_rate = tc358746_find_pll_settings(tc358746, refclk,
+							csi_link_rate * 2);
+	if (!tc358746->pll_rate) {
+		err = -EINVAL;
+		goto err_vep;
+	}
+
+	err = phy_mipi_dphy_get_default_config_for_hsclk(tc358746->pll_rate,
+							 csi_lanes,
+							 &tc358746->dphy_cfg);
+	if (err)
+		goto err_vep;
+
+	tc358746->mbusfmt = tc358746_def_fmt;
+	tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
+
+	dev_set_drvdata(dev, tc358746);
+	pm_runtime_set_autosuspend_delay(dev, 200);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_enable(dev);
+
+	err = pm_runtime_resume_and_get(dev);
+	if (err < 0) {
+		dev_err(dev, "Failed to resume the device\n");
+		goto err_vep;
+	}
+
+	 /* Ensure that CSI interface is put into LP-11 state */
+	err = tc358746_sw_reset(tc358746);
+	if (err) {
+		pm_runtime_put_noidle(dev);
+		dev_err(dev, "Failed to reset the device\n");
+		goto err_pm;
+	}
+
+	err = tc358746_read(tc358746, CHIPID_REG, &val);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_sync_autosuspend(dev);
+	if (err) {
+		dev_err(dev, "Failed to read chipid\n");
+		err = -ENODEV;
+		goto err_pm;
+	}
+
+	if (FIELD_GET(CHIPID, val) != 0x44) {
+		dev_err(dev, "Invalid chipid 0x%02x\n",
+			(u32)FIELD_GET(CHIPID, val));
+		err = -ENODEV;
+		goto err_pm;
+	}
+
+	/* Optional MCLK provider support */
+	if (device_property_present(dev, "#clock-cells")) {
+		const char *mclk_name;
+
+		/* Init to highest possibel MCLK */
+		tc358746->mclk_postdiv = 512;
+		tc358746->mclk_prediv = 8;
+
+		mclk_name = "tc358746-mclk";
+		device_property_read_string(dev, "clock-output-names",
+					    &mclk_name);
+
+		mclk_initdata.name = mclk_name;
+		mclk_initdata.ops = &tc358746_mclk_ops;
+		tc358746->mclk_hw.init = &mclk_initdata;
+
+		err = devm_clk_hw_register(dev, &tc358746->mclk_hw);
+		if (err) {
+			dev_err(dev, "Failed to register mclk provider\n");
+			goto err_pm;
+		}
+
+		err = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+						  &tc358746->mclk_hw);
+		if (err) {
+			dev_err(dev, "Failed to add mclk provider\n");
+			goto err_pm;
+		}
+	}
+
+	v4l2_ctrl_handler_init(&tc358746->ctrl_hdl, 1);
+
+	ctrl = v4l2_ctrl_new_int_menu(&tc358746->ctrl_hdl, NULL,
+				      V4L2_CID_LINK_FREQ, 0, 0,
+				      vep->link_frequencies);
+	if (ctrl)
+		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	tc358746->sd.ctrl_handler = &tc358746->ctrl_hdl;
+	if (tc358746->ctrl_hdl.error) {
+		err = tc358746->ctrl_hdl.error;
+		goto err_pm;
+	}
+
+	v4l2_ctrl_handler_setup(&tc358746->ctrl_hdl);
+
+	err = tc358746_async_register(tc358746);
+	if (err < 0)
+		goto err_ctrl;
+
+	dev_info(dev, "%s found @ 0x%x (%s)\n", client->name,
+		  client->addr, client->adapter->name);
+
+	return 0;
+
+err_ctrl:
+	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
+err_pm:
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+err_vep:
+	v4l2_fwnode_endpoint_free(vep);
+err_mc:
+	media_entity_cleanup(&sd->entity);
+
+	return err;
+}
+
+static int tc358746_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct tc358746 *tc358746 = to_tc358746(sd);
+
+	v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
+	v4l2_fwnode_endpoint_free(&tc358746->csi_vep);
+	v4l2_async_nf_unregister(&tc358746->notifier);
+	v4l2_async_nf_cleanup(&tc358746->notifier);
+	v4l2_async_unregister_subdev(sd);
+	v4l2_device_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+
+	pm_runtime_disable(sd->dev);
+	pm_runtime_set_suspended(sd->dev);
+	pm_runtime_dont_use_autosuspend(sd->dev);
+
+	return 0;
+}
+
+static int tc358746_suspend(struct device *dev)
+{
+	struct tc358746 *tc358746 = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(tc358746->refclk);
+
+	return regulator_bulk_disable(ARRAY_SIZE(tc358746_supplies),
+				      tc358746->supplies);
+}
+
+static int tc358746_resume(struct device *dev)
+{
+	struct tc358746 *tc358746 = dev_get_drvdata(dev);
+	int err;
+
+	gpiod_set_value(tc358746->reset_gpio, 1);
+
+	err = regulator_bulk_enable(ARRAY_SIZE(tc358746_supplies),
+				    tc358746->supplies);
+	if (err)
+		return err;
+
+	/* min. 200ns */
+	usleep_range(10, 20);
+
+	gpiod_set_value(tc358746->reset_gpio, 0);
+
+	err = clk_prepare_enable(tc358746->refclk);
+	if (err)
+		return err;
+
+	/* min. 700us ... 1ms */
+	usleep_range(1000, 1500);
+
+	/* Sync state */
+	err = tc358746_apply_pll_config(tc358746);
+	if (err)
+		return err;
+
+	err = tc358746_apply_dphy_config(tc358746);
+	if (err)
+		return err;
+
+	return tc358746_apply_misc_config(tc358746);
+}
+
+DEFINE_RUNTIME_DEV_PM_OPS(tc358746_pm_ops, tc358746_suspend,
+			  tc358746_resume, NULL);
+
+static const struct of_device_id __maybe_unused tc358746_of_match[] = {
+	{ .compatible = "toshiba,tc358746" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tc358746_of_match);
+
+static struct i2c_driver tc358746_driver = {
+	.driver = {
+		.name = "tc358746",
+		.pm = pm_ptr(&tc358746_pm_ops),
+		.of_match_table = tc358746_of_match,
+	},
+	.probe_new = tc358746_probe,
+	.remove = tc358746_remove,
+};
+
+module_i2c_driver(tc358746_driver);
+
+MODULE_DESCRIPTION("Toshiba TC358746 Parallel to CSI-2 bridge driver");
+MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
+MODULE_LICENSE("GPL");