| Message ID | 20220928112147.358745-4-hljunggr@cisco.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add the cat24c208 EDID EEPROM driver + new EDID capability | expand |
On Wed, 28 Sep 2022 13:21:45 +0200, Erling Ljunggren wrote: > Add devicetree bindings for new cat24c208 EDID EEPROM driver. > > Signed-off-by: Erling Ljunggren <hljunggr@cisco.com> > --- > .../bindings/media/i2c/onnn,cat24c208.yaml | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.example.dts:25.39-40 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:384: Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1420: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Wed, Sep 28, 2022 at 01:21:45PM +0200, Erling Ljunggren wrote: > Add devicetree bindings for new cat24c208 EDID EEPROM driver. > > Signed-off-by: Erling Ljunggren <hljunggr@cisco.com> > --- > .../bindings/media/i2c/onnn,cat24c208.yaml | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > new file mode 100644 > index 000000000000..fcfaccb5e39f > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/onnn,cat24c208.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ON Semiconductor CAT24C208 EDID EEPROM driver > + > +maintainers: > + - Hans Verkuil <hverkuil-cisco@xs4all.nl> > + > +description: | > + CAT24C208 is a dual port i2c EEPROM designed for EDID storage. > + > + > +properties: > + compatible: > + const: onnn,cat24c208 > + > + reg: > + maxItems: 1 > + > + hpd-gpios: > + maxItems: 1 > + description: > + References to the GPIO that controls the HDMI hot-plug detection pin. > + The active flag indicates the GPIO level that enables hot-plug detection. This node is supposed to represent a device, cat24c208, but that device I'm guessing knows nothing about HPD. That's a property of the connector and belongs in a connector node much like we have for the other side of display connections. It may seem like overkill, but it frequently evolves such that not having a connector node becomes a problem. See 'hdmi-connector' binding for example. Rob
On Thu, 2022-09-29 at 08:26 -0500, Rob Herring wrote: > On Wed, Sep 28, 2022 at 01:21:45PM +0200, Erling Ljunggren wrote: > > Add devicetree bindings for new cat24c208 EDID EEPROM driver. > > > > Signed-off-by: Erling Ljunggren <hljunggr@cisco.com> > > --- > > .../bindings/media/i2c/onnn,cat24c208.yaml | 48 > > +++++++++++++++++++ > > 1 file changed, 48 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > > b/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > > new file mode 100644 > > index 000000000000..fcfaccb5e39f > > --- /dev/null > > +++ > > b/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > > @@ -0,0 +1,48 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/i2c/onnn,cat24c208.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: ON Semiconductor CAT24C208 EDID EEPROM driver > > + > > +maintainers: > > + - Hans Verkuil <hverkuil-cisco@xs4all.nl> > > + > > +description: | > > + CAT24C208 is a dual port i2c EEPROM designed for EDID storage. > > + > > + > > +properties: > > + compatible: > > + const: onnn,cat24c208 > > + > > + reg: > > + maxItems: 1 > > + > > + hpd-gpios: > > + maxItems: 1 > > + description: > > + References to the GPIO that controls the HDMI hot-plug > > detection pin. > > + The active flag indicates the GPIO level that enables hot- > > plug detection. > > This node is supposed to represent a device, cat24c208, but that > device > I'm guessing knows nothing about HPD. That's a property of the > connector > and belongs in a connector node much like we have for the other side > of > display connections. It may seem like overkill, but it frequently > evolves such that not having a connector node becomes a problem. See > 'hdmi-connector' binding for example. > > Rob Is this what you had in mind? cat24c208: cat24c208@31 { compatible = "onnn,cat24c208"; reg = <0x31>; status = "okay"; connector-phandle = <&hdmi_in_node>; }; hdmi_in_node: hdmi-in { compatible = "hdmi-connector"; label = "HDMI IN"; type = "a"; hpd-gpios = <&pca9554 4 GPIO_ACTIVE_HIGH>; port { hdmi_in: endpoint { remote-endpoint = <&hdmi_out>; }; }; }; - Erling
diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml new file mode 100644 index 000000000000..fcfaccb5e39f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/onnn,cat24c208.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor CAT24C208 EDID EEPROM driver + +maintainers: + - Hans Verkuil <hverkuil-cisco@xs4all.nl> + +description: | + CAT24C208 is a dual port i2c EEPROM designed for EDID storage. + + +properties: + compatible: + const: onnn,cat24c208 + + reg: + maxItems: 1 + + hpd-gpios: + maxItems: 1 + description: + References to the GPIO that controls the HDMI hot-plug detection pin. + The active flag indicates the GPIO level that enables hot-plug detection. + + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cat24c208@31 { + compatible = "onnn,cat24c208"; + reg = <0x31>; + hpd-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>; + }; + }; +...
Add devicetree bindings for new cat24c208 EDID EEPROM driver. Signed-off-by: Erling Ljunggren <hljunggr@cisco.com> --- .../bindings/media/i2c/onnn,cat24c208.yaml | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml