From patchwork Wed Nov 9 14:18:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luca Ceresoli X-Patchwork-Id: 13037572 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 77FEAC4332F for ; Wed, 9 Nov 2022 14:21:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231475AbiKIOVS (ORCPT ); Wed, 9 Nov 2022 09:21:18 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58316 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231324AbiKIOUX (ORCPT ); Wed, 9 Nov 2022 09:20:23 -0500 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 58B2E22530; Wed, 9 Nov 2022 06:20:01 -0800 (PST) Received: from booty.fritz.box (unknown [77.244.183.192]) (Authenticated sender: luca.ceresoli@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id B190DFF80E; Wed, 9 Nov 2022 14:19:57 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1668003600; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=MC/YmsEtqdTSByaeOX415RJyVZ6P5QJjcVFPlc87iB8=; b=cPTWyP1CnotTQnFE1p5k390efrYHE9Yc79f+aM3E+L8nJlAMWdqYXwyM325u0Pg6XbhaqU UxEkHvdc1onsHVujk4p19UcqpH3x1E9sQl0mn7VM2+ifY6roFE47p14wSKf1v+mgiQaCwB 4EUawypB8T+slKVN/hzJHX5VecQ9czuDoQDeDmDPqyl1ClF7gUS0TxM920j+CWRIlziIJN XqzO4vuUSoqOWf23TCl3Ja44S+ZS6cADypLu8qGuCeyk2zulqoScohJ0vVQXor+MAug/b4 YF+cuP/qexQwFG/lz/3znGy3HIBIaSHjyUglnRiwVA6e5mAtMxZxoG+0JJPiBA== From: luca.ceresoli@bootlin.com To: David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Thierry Reding , Jonathan Hunter , Sowjanya Komatineni , Mauro Carvalho Chehab , Greg Kroah-Hartman , Hans Verkuil , Dmitry Osipenko Cc: Luca Ceresoli , linux-media@vger.kernel.org, linux-tegra@vger.kernel.org, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev, Thomas Petazzoni , Richard Leitner Subject: [PATCH 16/23] staging: media: tegra-video: move MIPI calibration calls from VI to CSI Date: Wed, 9 Nov 2022 15:18:45 +0100 Message-Id: <20221109141852.729246-17-luca.ceresoli@bootlin.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20221109141852.729246-1-luca.ceresoli@bootlin.com> References: <20221109141852.729246-1-luca.ceresoli@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Luca Ceresoli The CSI module does not handle all the MIPI lane calibration procedure, leaving a small part of it to the VI module. In doing this, tegra_channel_enable_stream() (vi.c) manipulates the private data of the upstream subdev casting it to struct 'tegra_csi_channel', which will be wrong after introducing a VIP (parallel video input) channel. This prevents adding support for the VIP module. It also breaks the logical isolation between modules. Since the lane calibration requirement does not exist in the parallel input module, moving the calibration function to a per-module op is not optimal. Instead move the calibration procedure in the CSI module, together with the rest of the calibration procedures. After this change, tegra_channel_enable_stream() just calls v4l2_subdev_call() to ask for a stream start/stop to the CSI module, which in turn knows all the CSI-specific details to implement it. Signed-off-by: Luca Ceresoli --- drivers/staging/media/tegra-video/csi.c | 44 ++++++++++++++++++++ drivers/staging/media/tegra-video/vi.c | 54 ++----------------------- 2 files changed, 48 insertions(+), 50 deletions(-) diff --git a/drivers/staging/media/tegra-video/csi.c b/drivers/staging/media/tegra-video/csi.c index 426e653bd55d..3a614f568a31 100644 --- a/drivers/staging/media/tegra-video/csi.c +++ b/drivers/staging/media/tegra-video/csi.c @@ -328,12 +328,42 @@ static int tegra_csi_enable_stream(struct v4l2_subdev *subdev) } csi_chan->pg_mode = chan->pg_mode; + + /* + * Tegra CSI receiver can detect the first LP to HS transition. + * So, start the CSI stream-on prior to sensor stream-on and + * vice-versa for stream-off. + */ ret = csi->ops->csi_start_streaming(csi_chan); if (ret < 0) goto finish_calibration; + if (csi_chan->mipi) { + struct v4l2_subdev *src_subdev; + /* + * TRM has incorrectly documented to wait for done status from + * calibration logic after CSI interface power on. + * As per the design, calibration results are latched and applied + * to the pads only when the link is in LP11 state which will happen + * during the sensor stream-on. + * CSI subdev stream-on triggers start of MIPI pads calibration. + * Wait for calibration to finish here after sensor subdev stream-on. + */ + src_subdev = tegra_channel_get_remote_source_subdev(chan); + ret = v4l2_subdev_call(src_subdev, video, s_stream, true); + err = tegra_mipi_finish_calibration(csi_chan->mipi); + + if (ret < 0 && ret != -ENOIOCTLCMD) + goto disable_csi_stream; + + if (err < 0) + dev_warn(csi->dev, "MIPI calibration failed: %d\n", err); + } + return 0; +disable_csi_stream: + csi->ops->csi_stop_streaming(csi_chan); finish_calibration: if (csi_chan->mipi) tegra_mipi_finish_calibration(csi_chan->mipi); @@ -352,10 +382,24 @@ static int tegra_csi_enable_stream(struct v4l2_subdev *subdev) static int tegra_csi_disable_stream(struct v4l2_subdev *subdev) { + struct tegra_vi_channel *chan = v4l2_get_subdev_hostdata(subdev); struct tegra_csi_channel *csi_chan = to_csi_chan(subdev); struct tegra_csi *csi = csi_chan->csi; int err; + /* + * Stream-off subdevices in reverse order to stream-on. + * Remote source subdev in TPG mode is same as CSI subdev. + */ + if (csi_chan->mipi) { + struct v4l2_subdev *src_subdev; + + src_subdev = tegra_channel_get_remote_source_subdev(chan); + err = v4l2_subdev_call(src_subdev, video, s_stream, false); + if (err < 0 && err != -ENOIOCTLCMD) + dev_err_probe(csi->dev, err, "source subdev stream off failed\n"); + } + csi->ops->csi_stop_streaming(csi_chan); if (csi_chan->mipi) { diff --git a/drivers/staging/media/tegra-video/vi.c b/drivers/staging/media/tegra-video/vi.c index 8b6cf50e1eae..2dd3c6c944a2 100644 --- a/drivers/staging/media/tegra-video/vi.c +++ b/drivers/staging/media/tegra-video/vi.c @@ -187,49 +187,15 @@ tegra_channel_get_remote_source_subdev(struct tegra_vi_channel *chan) static int tegra_channel_enable_stream(struct tegra_vi_channel *chan) { - struct v4l2_subdev *csi_subdev, *src_subdev; - struct tegra_csi_channel *csi_chan; - int ret, err; + struct v4l2_subdev *subdev; + int ret; - /* - * Tegra CSI receiver can detect the first LP to HS transition. - * So, start the CSI stream-on prior to sensor stream-on and - * vice-versa for stream-off. - */ - csi_subdev = tegra_channel_get_remote_csi_subdev(chan); - ret = v4l2_subdev_call(csi_subdev, video, s_stream, true); + subdev = tegra_channel_get_remote_csi_subdev(chan); + ret = v4l2_subdev_call(subdev, video, s_stream, true); if (ret < 0 && ret != -ENOIOCTLCMD) return ret; - if (IS_ENABLED(CONFIG_VIDEO_TEGRA_TPG)) - return 0; - - csi_chan = v4l2_get_subdevdata(csi_subdev); - /* - * TRM has incorrectly documented to wait for done status from - * calibration logic after CSI interface power on. - * As per the design, calibration results are latched and applied - * to the pads only when the link is in LP11 state which will happen - * during the sensor stream-on. - * CSI subdev stream-on triggers start of MIPI pads calibration. - * Wait for calibration to finish here after sensor subdev stream-on. - */ - src_subdev = tegra_channel_get_remote_source_subdev(chan); - ret = v4l2_subdev_call(src_subdev, video, s_stream, true); - err = tegra_mipi_finish_calibration(csi_chan->mipi); - - if (ret < 0 && ret != -ENOIOCTLCMD) - goto err_disable_csi_stream; - - if (err < 0) - dev_warn(csi_chan->csi->dev, - "MIPI calibration failed: %d\n", err); - return 0; - -err_disable_csi_stream: - v4l2_subdev_call(csi_subdev, video, s_stream, false); - return ret; } static int tegra_channel_disable_stream(struct tegra_vi_channel *chan) @@ -237,18 +203,6 @@ static int tegra_channel_disable_stream(struct tegra_vi_channel *chan) struct v4l2_subdev *subdev; int ret; - /* - * Stream-off subdevices in reverse order to stream-on. - * Remote source subdev in TPG mode is same as CSI subdev. - */ - subdev = tegra_channel_get_remote_source_subdev(chan); - ret = v4l2_subdev_call(subdev, video, s_stream, false); - if (ret < 0 && ret != -ENOIOCTLCMD) - return ret; - - if (IS_ENABLED(CONFIG_VIDEO_TEGRA_TPG)) - return 0; - subdev = tegra_channel_get_remote_csi_subdev(chan); ret = v4l2_subdev_call(subdev, video, s_stream, false); if (ret < 0 && ret != -ENOIOCTLCMD)