From patchwork Sat Nov 12 12:41:26 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 13041196 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 930FFC43219 for ; Sat, 12 Nov 2022 12:41:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234923AbiKLMlq (ORCPT ); Sat, 12 Nov 2022 07:41:46 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52564 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234847AbiKLMln (ORCPT ); Sat, 12 Nov 2022 07:41:43 -0500 Received: from mail-ej1-x62b.google.com (mail-ej1-x62b.google.com [IPv6:2a00:1450:4864:20::62b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1435012ACE for ; Sat, 12 Nov 2022 04:41:42 -0800 (PST) Received: by mail-ej1-x62b.google.com with SMTP id bj12so18042779ejb.13 for ; Sat, 12 Nov 2022 04:41:41 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=jDK4zcScJZbs0+D+aVK+lquKsO1LJrdqxEJtJmVP6qs=; b=WIE3E0a7wbYG1PcIGAOlP+GAagrcOhF+FOnZWkExlbWUcgdnLmw2ds45yqDLhcSZEE oH+jn609FLuy9M7sYOBkNexzeRMC364UZFUCLPSpZwj8Cx63gJr1D6sWH5rdkDkZH3w9 QjPf6bs0Gl1hOY/db6+p/sp114OU8TZmLAJL8xVbXkvrB4DHenGh6tWBaFzj1ajNprek K0+tS6z2lMURTlZuPFsoeRk/N8jqh41xCZU7DucfI4bzN1rn8rCe5Di6Bs9xwr+OuGpv 8q/4vD8wX2bM+R34J7drN4XfjTgG3ssvfj33eJzcLau8sequVRRP+cqjX+MA7AtWubgd XAKw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=jDK4zcScJZbs0+D+aVK+lquKsO1LJrdqxEJtJmVP6qs=; b=czZ4wQWIihBHkU8fxdDQ2yuanZX951yzsbaTXgNySlmZm98M/JbOPT3LUEG50YiGif NAEqjQMSgEri+gkFpOpKXeprR38/G8FjBad9StT7uL7kC/e4aeUu+3WyqJ0Kx+/0uDoI XqwoGWS5sxLQsEPykOwhtnFRJ6R2WMy1Syre3x8eF3zi6wsmFlcEl2JQQNm399n5MKq7 VbC/0K+4fcTiB684jwfb5LmfnA5danaXD3/IFOrhRVnVpnCZV45aBfJKWXmdaFi9ermq AYgrxYyeBfUb2QQzG6AosFxdJJiv+sHI6xuD59x0BfMr+ObAA6DDNzfL6j0V63S78uA9 pzhA== X-Gm-Message-State: ANoB5pnnPX34Y1MXrf1LMaNxYpwnLDQPLqfSgfQswX66cLCw3JlCmzIN My1dQ1B2gL9+eP5ZWDyfRBrhJg== X-Google-Smtp-Source: AA0mqf7W7np7Qqikh74VZyDkmczIrnoJkqDihn5BGzfKb1t7NEDE0Udoh9C8KCpfHuDoC2iN77pXzQ== X-Received: by 2002:a17:907:7f27:b0:78c:b8b0:9d35 with SMTP id qf39-20020a1709077f2700b0078cb8b09d35mr5078637ejc.586.1668256901624; Sat, 12 Nov 2022 04:41:41 -0800 (PST) Received: from localhost.localdomain (2001-1c06-2302-5600-7e82-4de3-e7e5-df38.cable.dynamic.v6.ziggo.nl. [2001:1c06:2302:5600:7e82:4de3:e7e5:df38]) by smtp.gmail.com with ESMTPSA id h23-20020a170906585700b007317f017e64sm1882915ejs.134.2022.11.12.04.41.40 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 12 Nov 2022 04:41:41 -0800 (PST) From: Bryan O'Donoghue To: robert.foss@linaro.org, todor.too@gmail.com, agross@kernel.org, andersson@kernel.org, konrad.dybcio@somainline.org, mchehab@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, dmitry.baryshkov@linaro.org, vladimir.zapolskiy@linaro.org Cc: sakari.ailus@iki.fi, hverkuil@xs4all.nl, laurent.pinchart@ideasonboard.com, quic_mmitkov@quicinc.com, linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Bryan O'Donoghue Subject: [PATCH v4 3/3] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add navigation mezzanine dts Date: Sat, 12 Nov 2022 12:41:26 +0000 Message-Id: <20221112124126.86815-4-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20221112124126.86815-1-bryan.odonoghue@linaro.org> References: <20221112124126.86815-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Move the dts data for the rb3 navigation mezzanine into its own dts file. Suggested-by: Dmitry Baryshkov Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../sdm845-db845c-navigation-mezzanine.dts | 109 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 101 ---------------- 3 files changed, 110 insertions(+), 101 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index cd88efa19e750..5eadd251a0a16 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c-navigation-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts new file mode 100644 index 0000000000000..0862ca30c8963 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022, Linaro Ltd. + */ + +/dts-v1/; + +#include "sdm845-db845c.dts" + +&cci { + status = "okay"; +}; + +&camss { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; + + status = "ok"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&ov8856_ep>; + }; + }; + }; +}; + +&cci_i2c0 { + camera@10 { + compatible = "ovti,ov8856"; + reg = <0x10>; + + /* CAM0_RST_N */ + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_default>; + + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "xvclk"; + clock-frequency = <19200000>; + + /* + * The &vreg_s4a_1p8 trace is powered on as a, + * so it is represented by a fixed regulator. + * + * The 2.8V vdda-supply and 1.2V vddd-supply regulators + * both have to be enabled through the power management + * gpios. + */ + dovdd-supply = <&vreg_lvs1a_1p8>; + avdd-supply = <&cam0_avdd_2v8>; + dvdd-supply = <&cam0_dvdd_1v2>; + + status = "ok"; + + port { + ov8856_ep: endpoint { + link-frequencies = /bits/ 64 + <360000000 180000000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; + +&cci_i2c1 { + camera@60 { + compatible = "ovti,ov7251"; + + /* I2C address as per ov7251.txt linux documentation */ + reg = <0x60>; + + /* CAM3_RST_N */ + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam3_default>; + + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "xclk"; + clock-frequency = <24000000>; + + /* + * The &vreg_s4a_1p8 trace always powered on. + * + * The 2.8V vdda-supply regulator is enabled when the + * vreg_s4a_1p8 trace is pulled high. + * It too is represented by a fixed regulator. + * + * No 1.2V vddd-supply regulator is used. + */ + vdddo-supply = <&vreg_lvs1a_1p8>; + vdda-supply = <&cam3_avdd_2v8>; + + status = "disable"; + + port { + ov7251_ep: endpoint { + data-lanes = <0 1>; +/* remote-endpoint = <&csiphy3_ep>; */ + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 3e7ceb0861eb0..f41c6d600ea8c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1174,107 +1174,6 @@ &pm8998_gpio { }; -&cci { - status = "okay"; -}; - -&camss { - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; - - status = "ok"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - csiphy0_ep: endpoint { - data-lanes = <0 1 2 3>; - remote-endpoint = <&ov8856_ep>; - }; - }; - }; -}; - -&cci_i2c0 { - camera@10 { - compatible = "ovti,ov8856"; - reg = <0x10>; - - /* CAM0_RST_N */ - reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&cam0_default>; - - clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; - clock-names = "xvclk"; - clock-frequency = <19200000>; - - /* - * The &vreg_s4a_1p8 trace is powered on as a, - * so it is represented by a fixed regulator. - * - * The 2.8V vdda-supply and 1.2V vddd-supply regulators - * both have to be enabled through the power management - * gpios. - */ - dovdd-supply = <&vreg_lvs1a_1p8>; - avdd-supply = <&cam0_avdd_2v8>; - dvdd-supply = <&cam0_dvdd_1v2>; - - status = "ok"; - - port { - ov8856_ep: endpoint { - link-frequencies = /bits/ 64 - <360000000 180000000>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; -}; - -&cci_i2c1 { - camera@60 { - compatible = "ovti,ov7251"; - - /* I2C address as per ov7251.txt linux documentation */ - reg = <0x60>; - - /* CAM3_RST_N */ - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cam3_default>; - - clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - /* - * The &vreg_s4a_1p8 trace always powered on. - * - * The 2.8V vdda-supply regulator is enabled when the - * vreg_s4a_1p8 trace is pulled high. - * It too is represented by a fixed regulator. - * - * No 1.2V vddd-supply regulator is used. - */ - vdddo-supply = <&vreg_lvs1a_1p8>; - vdda-supply = <&cam3_avdd_2v8>; - - status = "disable"; - - port { - ov7251_ep: endpoint { - data-lanes = <0 1>; -/* remote-endpoint = <&csiphy3_ep>; */ - }; - }; - }; -}; - /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi0_default { config {