diff mbox series

[v5,07/11] media: v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present

Message ID 20230120114524.408368-8-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show
Series leds: lookup-table support + int3472/media privacy LED support | expand

Commit Message

Hans de Goede Jan. 20, 2023, 11:45 a.m. UTC
Make v4l2_async_register_subdev_sensor() try to get a privacy LED
associated with the sensor and extend the call_s_stream() wrapper to
enable/disable the privacy LED if found.

This makes the core handle privacy LED control, rather then having to
duplicate this code in all the sensor drivers.

Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v4 (requested by Laurent Pinchart):
- Move the led_get() call to v4l2_async_register_subdev_sensor() and
  make errors other then -ENOENT fail the register() call.
- Move the led_disable_sysfs() call to be done at led_get() time, instead
  of only disabling the sysfs interface when the sensor is streaming.
---
 drivers/media/v4l2-core/v4l2-fwnode.c | 15 +++++++++++++++
 drivers/media/v4l2-core/v4l2-subdev.c | 18 ++++++++++++++++++
 include/media/v4l2-subdev.h           |  3 +++
 3 files changed, 36 insertions(+)

Comments

Sakari Ailus Jan. 20, 2023, 12:51 p.m. UTC | #1
Hi Hans,

On Fri, Jan 20, 2023 at 12:45:20PM +0100, Hans de Goede wrote:
> Make v4l2_async_register_subdev_sensor() try to get a privacy LED
> associated with the sensor and extend the call_s_stream() wrapper to
> enable/disable the privacy LED if found.
> 
> This makes the core handle privacy LED control, rather then having to
> duplicate this code in all the sensor drivers.
> 
> Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v4 (requested by Laurent Pinchart):
> - Move the led_get() call to v4l2_async_register_subdev_sensor() and
>   make errors other then -ENOENT fail the register() call.
> - Move the led_disable_sysfs() call to be done at led_get() time, instead
>   of only disabling the sysfs interface when the sensor is streaming.
> ---
>  drivers/media/v4l2-core/v4l2-fwnode.c | 15 +++++++++++++++
>  drivers/media/v4l2-core/v4l2-subdev.c | 18 ++++++++++++++++++
>  include/media/v4l2-subdev.h           |  3 +++
>  3 files changed, 36 insertions(+)
> 
> diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
> index c8a2264262bc..cfac1e2ae501 100644
> --- a/drivers/media/v4l2-core/v4l2-fwnode.c
> +++ b/drivers/media/v4l2-core/v4l2-fwnode.c
> @@ -16,6 +16,7 @@
>   */
>  #include <linux/acpi.h>
>  #include <linux/kernel.h>
> +#include <linux/leds.h>
>  #include <linux/mm.h>
>  #include <linux/of.h>
>  #include <linux/property.h>
> @@ -1295,6 +1296,20 @@ int v4l2_async_register_subdev_sensor(struct v4l2_subdev *sd)
>  	if (WARN_ON(!sd->dev))
>  		return -ENODEV;
>  
> +#if IS_REACHABLE(CONFIG_LEDS_CLASS)
> +	sd->privacy_led = led_get(sd->dev, "privacy-led");
> +	if (IS_ERR(sd->privacy_led) && PTR_ERR(sd->privacy_led) != -ENOENT)
> +		return dev_err_probe(sd->dev, PTR_ERR(sd->privacy_led), "getting privacy LED\n");
> +
> +	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
> +		mutex_lock(&sd->privacy_led->led_access);
> +		led_sysfs_disable(sd->privacy_led);
> +		led_trigger_remove(sd->privacy_led);
> +		led_set_brightness(sd->privacy_led, 0);
> +		mutex_unlock(&sd->privacy_led->led_access);
> +	}
> +#endif
> +
>  	notifier = kzalloc(sizeof(*notifier), GFP_KERNEL);
>  	if (!notifier)
>  		return -ENOMEM;
> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
> index 4988a25bd8f4..f33e943aab3f 100644
> --- a/drivers/media/v4l2-core/v4l2-subdev.c
> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
> @@ -9,6 +9,7 @@
>   */
>  
>  #include <linux/ioctl.h>
> +#include <linux/leds.h>
>  #include <linux/mm.h>
>  #include <linux/module.h>
>  #include <linux/slab.h>
> @@ -322,6 +323,14 @@ static int call_s_stream(struct v4l2_subdev *sd, int enable)
>  {
>  	int ret;
>  
> +#if IS_REACHABLE(CONFIG_LEDS_CLASS)
> +	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
> +		if (enable)
> +			led_set_brightness(sd->privacy_led, sd->privacy_led->max_brightness);
> +		else
> +			led_set_brightness(sd->privacy_led, 0);
> +	}
> +#endif
>  	ret = sd->ops->video->s_stream(sd, enable);
>  
>  	if (!enable && ret < 0) {
> @@ -1050,6 +1059,14 @@ EXPORT_SYMBOL_GPL(__v4l2_subdev_init_finalize);
>  
>  void v4l2_subdev_cleanup(struct v4l2_subdev *sd)

v4l2_subdev_cleanup() is currently called by drivers using V4L2 subdev
state at the moment, making it unsuitable for the purpose of releasing the
privacy led.

Could you move this to v4l2_async_unregister_subdev() instead?

>  {
> +#if IS_REACHABLE(CONFIG_LEDS_CLASS)
> +	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
> +		mutex_lock(&sd->privacy_led->led_access);
> +		led_sysfs_enable(sd->privacy_led);
> +		mutex_unlock(&sd->privacy_led->led_access);
> +		led_put(sd->privacy_led);
> +	}
> +#endif
>  	__v4l2_subdev_state_free(sd->active_state);
>  	sd->active_state = NULL;
>  }
> @@ -1090,6 +1107,7 @@ void v4l2_subdev_init(struct v4l2_subdev *sd, const struct v4l2_subdev_ops *ops)
>  	sd->grp_id = 0;
>  	sd->dev_priv = NULL;
>  	sd->host_priv = NULL;
> +	sd->privacy_led = NULL;
>  #if defined(CONFIG_MEDIA_CONTROLLER)
>  	sd->entity.name = sd->name;
>  	sd->entity.obj_type = MEDIA_ENTITY_TYPE_V4L2_SUBDEV;
> diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
> index b15fa9930f30..0547313f98cc 100644
> --- a/include/media/v4l2-subdev.h
> +++ b/include/media/v4l2-subdev.h
> @@ -38,6 +38,7 @@ struct v4l2_subdev;
>  struct v4l2_subdev_fh;
>  struct tuner_setup;
>  struct v4l2_mbus_frame_desc;
> +struct led_classdev;
>  
>  /**
>   * struct v4l2_decode_vbi_line - used to decode_vbi_line
> @@ -982,6 +983,8 @@ struct v4l2_subdev {
>  	 * appropriate functions.
>  	 */
>  
> +	struct led_classdev *privacy_led;
> +
>  	/*
>  	 * TODO: active_state should most likely be changed from a pointer to an
>  	 * embedded field. For the time being it's kept as a pointer to more
Hans de Goede Jan. 27, 2023, 10:29 a.m. UTC | #2
Hi Sakari,

On 1/20/23 13:51, Sakari Ailus wrote:
> Hi Hans,
> 
> On Fri, Jan 20, 2023 at 12:45:20PM +0100, Hans de Goede wrote:
>> Make v4l2_async_register_subdev_sensor() try to get a privacy LED
>> associated with the sensor and extend the call_s_stream() wrapper to
>> enable/disable the privacy LED if found.
>>
>> This makes the core handle privacy LED control, rather then having to
>> duplicate this code in all the sensor drivers.
>>
>> Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
>> Acked-by: Linus Walleij <linus.walleij@linaro.org>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v4 (requested by Laurent Pinchart):
>> - Move the led_get() call to v4l2_async_register_subdev_sensor() and
>>   make errors other then -ENOENT fail the register() call.
>> - Move the led_disable_sysfs() call to be done at led_get() time, instead
>>   of only disabling the sysfs interface when the sensor is streaming.
>> ---
>>  drivers/media/v4l2-core/v4l2-fwnode.c | 15 +++++++++++++++
>>  drivers/media/v4l2-core/v4l2-subdev.c | 18 ++++++++++++++++++
>>  include/media/v4l2-subdev.h           |  3 +++
>>  3 files changed, 36 insertions(+)
>>
>> diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
>> index c8a2264262bc..cfac1e2ae501 100644
>> --- a/drivers/media/v4l2-core/v4l2-fwnode.c
>> +++ b/drivers/media/v4l2-core/v4l2-fwnode.c
>> @@ -16,6 +16,7 @@
>>   */
>>  #include <linux/acpi.h>
>>  #include <linux/kernel.h>
>> +#include <linux/leds.h>
>>  #include <linux/mm.h>
>>  #include <linux/of.h>
>>  #include <linux/property.h>
>> @@ -1295,6 +1296,20 @@ int v4l2_async_register_subdev_sensor(struct v4l2_subdev *sd)
>>  	if (WARN_ON(!sd->dev))
>>  		return -ENODEV;
>>  
>> +#if IS_REACHABLE(CONFIG_LEDS_CLASS)
>> +	sd->privacy_led = led_get(sd->dev, "privacy-led");
>> +	if (IS_ERR(sd->privacy_led) && PTR_ERR(sd->privacy_led) != -ENOENT)
>> +		return dev_err_probe(sd->dev, PTR_ERR(sd->privacy_led), "getting privacy LED\n");
>> +
>> +	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
>> +		mutex_lock(&sd->privacy_led->led_access);
>> +		led_sysfs_disable(sd->privacy_led);
>> +		led_trigger_remove(sd->privacy_led);
>> +		led_set_brightness(sd->privacy_led, 0);
>> +		mutex_unlock(&sd->privacy_led->led_access);
>> +	}
>> +#endif
>> +
>>  	notifier = kzalloc(sizeof(*notifier), GFP_KERNEL);
>>  	if (!notifier)
>>  		return -ENOMEM;
>> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
>> index 4988a25bd8f4..f33e943aab3f 100644
>> --- a/drivers/media/v4l2-core/v4l2-subdev.c
>> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
>> @@ -9,6 +9,7 @@
>>   */
>>  
>>  #include <linux/ioctl.h>
>> +#include <linux/leds.h>
>>  #include <linux/mm.h>
>>  #include <linux/module.h>
>>  #include <linux/slab.h>
>> @@ -322,6 +323,14 @@ static int call_s_stream(struct v4l2_subdev *sd, int enable)
>>  {
>>  	int ret;
>>  
>> +#if IS_REACHABLE(CONFIG_LEDS_CLASS)
>> +	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
>> +		if (enable)
>> +			led_set_brightness(sd->privacy_led, sd->privacy_led->max_brightness);
>> +		else
>> +			led_set_brightness(sd->privacy_led, 0);
>> +	}
>> +#endif
>>  	ret = sd->ops->video->s_stream(sd, enable);
>>  
>>  	if (!enable && ret < 0) {
>> @@ -1050,6 +1059,14 @@ EXPORT_SYMBOL_GPL(__v4l2_subdev_init_finalize);
>>  
>>  void v4l2_subdev_cleanup(struct v4l2_subdev *sd)
> 
> v4l2_subdev_cleanup() is currently called by drivers using V4L2 subdev
> state at the moment, making it unsuitable for the purpose of releasing the
> privacy led.
> 
> Could you move this to v4l2_async_unregister_subdev() instead?

Good point.

Looking into this also made me realize that I forgot to cleanup
the LED reference (and re-enable sysfs control) in case of
errors in v4l2_async_register_subdev_sensor() after getting it.

Fixing this requires adding a v4l2_subdev_put_privacy_led()
helper. At which point it makes sense to also put the code
to get the led in a v4l2_subdev_get_privacy_led() helper
and then all privacy-led code lives inside a v4l2-subdev.c
removing the need for:

[PATCH v5 06/11] media: v4l2-core: Built async and fwnode code into videodev.ko

all together :)   So I'll drop that from v6 of this series to
make the series simpler.

Regards,

Hans





> 
>>  {
>> +#if IS_REACHABLE(CONFIG_LEDS_CLASS)
>> +	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
>> +		mutex_lock(&sd->privacy_led->led_access);
>> +		led_sysfs_enable(sd->privacy_led);
>> +		mutex_unlock(&sd->privacy_led->led_access);
>> +		led_put(sd->privacy_led);
>> +	}
>> +#endif
>>  	__v4l2_subdev_state_free(sd->active_state);
>>  	sd->active_state = NULL;
>>  }
>> @@ -1090,6 +1107,7 @@ void v4l2_subdev_init(struct v4l2_subdev *sd, const struct v4l2_subdev_ops *ops)
>>  	sd->grp_id = 0;
>>  	sd->dev_priv = NULL;
>>  	sd->host_priv = NULL;
>> +	sd->privacy_led = NULL;
>>  #if defined(CONFIG_MEDIA_CONTROLLER)
>>  	sd->entity.name = sd->name;
>>  	sd->entity.obj_type = MEDIA_ENTITY_TYPE_V4L2_SUBDEV;
>> diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
>> index b15fa9930f30..0547313f98cc 100644
>> --- a/include/media/v4l2-subdev.h
>> +++ b/include/media/v4l2-subdev.h
>> @@ -38,6 +38,7 @@ struct v4l2_subdev;
>>  struct v4l2_subdev_fh;
>>  struct tuner_setup;
>>  struct v4l2_mbus_frame_desc;
>> +struct led_classdev;
>>  
>>  /**
>>   * struct v4l2_decode_vbi_line - used to decode_vbi_line
>> @@ -982,6 +983,8 @@ struct v4l2_subdev {
>>  	 * appropriate functions.
>>  	 */
>>  
>> +	struct led_classdev *privacy_led;
>> +
>>  	/*
>>  	 * TODO: active_state should most likely be changed from a pointer to an
>>  	 * embedded field. For the time being it's kept as a pointer to more
>
diff mbox series

Patch

diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
index c8a2264262bc..cfac1e2ae501 100644
--- a/drivers/media/v4l2-core/v4l2-fwnode.c
+++ b/drivers/media/v4l2-core/v4l2-fwnode.c
@@ -16,6 +16,7 @@ 
  */
 #include <linux/acpi.h>
 #include <linux/kernel.h>
+#include <linux/leds.h>
 #include <linux/mm.h>
 #include <linux/of.h>
 #include <linux/property.h>
@@ -1295,6 +1296,20 @@  int v4l2_async_register_subdev_sensor(struct v4l2_subdev *sd)
 	if (WARN_ON(!sd->dev))
 		return -ENODEV;
 
+#if IS_REACHABLE(CONFIG_LEDS_CLASS)
+	sd->privacy_led = led_get(sd->dev, "privacy-led");
+	if (IS_ERR(sd->privacy_led) && PTR_ERR(sd->privacy_led) != -ENOENT)
+		return dev_err_probe(sd->dev, PTR_ERR(sd->privacy_led), "getting privacy LED\n");
+
+	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
+		mutex_lock(&sd->privacy_led->led_access);
+		led_sysfs_disable(sd->privacy_led);
+		led_trigger_remove(sd->privacy_led);
+		led_set_brightness(sd->privacy_led, 0);
+		mutex_unlock(&sd->privacy_led->led_access);
+	}
+#endif
+
 	notifier = kzalloc(sizeof(*notifier), GFP_KERNEL);
 	if (!notifier)
 		return -ENOMEM;
diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
index 4988a25bd8f4..f33e943aab3f 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -9,6 +9,7 @@ 
  */
 
 #include <linux/ioctl.h>
+#include <linux/leds.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -322,6 +323,14 @@  static int call_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	int ret;
 
+#if IS_REACHABLE(CONFIG_LEDS_CLASS)
+	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
+		if (enable)
+			led_set_brightness(sd->privacy_led, sd->privacy_led->max_brightness);
+		else
+			led_set_brightness(sd->privacy_led, 0);
+	}
+#endif
 	ret = sd->ops->video->s_stream(sd, enable);
 
 	if (!enable && ret < 0) {
@@ -1050,6 +1059,14 @@  EXPORT_SYMBOL_GPL(__v4l2_subdev_init_finalize);
 
 void v4l2_subdev_cleanup(struct v4l2_subdev *sd)
 {
+#if IS_REACHABLE(CONFIG_LEDS_CLASS)
+	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
+		mutex_lock(&sd->privacy_led->led_access);
+		led_sysfs_enable(sd->privacy_led);
+		mutex_unlock(&sd->privacy_led->led_access);
+		led_put(sd->privacy_led);
+	}
+#endif
 	__v4l2_subdev_state_free(sd->active_state);
 	sd->active_state = NULL;
 }
@@ -1090,6 +1107,7 @@  void v4l2_subdev_init(struct v4l2_subdev *sd, const struct v4l2_subdev_ops *ops)
 	sd->grp_id = 0;
 	sd->dev_priv = NULL;
 	sd->host_priv = NULL;
+	sd->privacy_led = NULL;
 #if defined(CONFIG_MEDIA_CONTROLLER)
 	sd->entity.name = sd->name;
 	sd->entity.obj_type = MEDIA_ENTITY_TYPE_V4L2_SUBDEV;
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index b15fa9930f30..0547313f98cc 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -38,6 +38,7 @@  struct v4l2_subdev;
 struct v4l2_subdev_fh;
 struct tuner_setup;
 struct v4l2_mbus_frame_desc;
+struct led_classdev;
 
 /**
  * struct v4l2_decode_vbi_line - used to decode_vbi_line
@@ -982,6 +983,8 @@  struct v4l2_subdev {
 	 * appropriate functions.
 	 */
 
+	struct led_classdev *privacy_led;
+
 	/*
 	 * TODO: active_state should most likely be changed from a pointer to an
 	 * embedded field. For the time being it's kept as a pointer to more