diff mbox series

[v4,6/8] media: i2c: ov5670: Add runtime_pm operations

Message ID 20230125173707.127687-7-jacopo.mondi@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series media: i2c: ov5670: OF support, runtime_pm, regulators | expand

Commit Message

Jacopo Mondi Jan. 25, 2023, 5:37 p.m. UTC 
Implement the power up and power down routines and install them as
runtime_pm handler for runtime_suspend and runtime_resume operations.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/ov5670.c | 61 ++++++++++++++++++++++++++++++++++----
 1 file changed, 56 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov5670.c b/drivers/media/i2c/ov5670.c
index 6843b2d9a2d4..0a530b9edd3c 100644
--- a/drivers/media/i2c/ov5670.c
+++ b/drivers/media/i2c/ov5670.c
@@ -1,8 +1,11 @@ 
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2017 Intel Corporation.
 
+#include <asm/unaligned.h>
+
 #include <linux/acpi.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/mod_devicetable.h>
@@ -15,6 +18,8 @@ 
 #include <media/v4l2-event.h>
 #include <media/v4l2-fwnode.h>
 
+#define OV5670_XCLK_FREQ		19200000
+
 #define OV5670_REG_CHIP_ID		0x300a
 #define OV5670_CHIP_ID			0x005670
 
@@ -2424,6 +2429,41 @@  static int ov5670_set_stream(struct v4l2_subdev *sd, int enable)
 	return ret;
 }
 
+static int __maybe_unused ov5670_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov5670 *ov5670 = to_ov5670(sd);
+	unsigned long delay_us;
+	int ret;
+
+	ret = regulator_bulk_enable(OV5670_NUM_SUPPLIES, ov5670->supplies);
+	if (ret)
+		return ret;
+
+	gpiod_set_value_cansleep(ov5670->pwdn_gpio, 0);
+	gpiod_set_value_cansleep(ov5670->reset_gpio, 0);
+
+	/* 8192 * 2 clock pulses before the first SCCB transaction. */
+	delay_us = DIV_ROUND_UP(8192 * 2, OV5670_XCLK_FREQ / 1000 / 1000);
+	fsleep(delay_us);
+
+	return 0;
+}
+
+static int __maybe_unused ov5670_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov5670 *ov5670 = to_ov5670(sd);
+
+	gpiod_set_value_cansleep(ov5670->reset_gpio, 1);
+	gpiod_set_value_cansleep(ov5670->pwdn_gpio, 1);
+	regulator_bulk_disable(OV5670_NUM_SUPPLIES, ov5670->supplies);
+
+	return 0;
+}
+
 static int __maybe_unused ov5670_suspend(struct device *dev)
 {
 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
@@ -2546,7 +2586,7 @@  static int ov5670_probe(struct i2c_client *client)
 					 &input_clk);
 	}
 
-	if (input_clk != 19200000) {
+	if (input_clk != OV5670_XCLK_FREQ) {
 		dev_err(&client->dev,
 			"Unsupported clock frequency %u\n", input_clk);
 		return -EINVAL;
@@ -2569,12 +2609,21 @@  static int ov5670_probe(struct i2c_client *client)
 
 	full_power = acpi_dev_state_d0(&client->dev);
 	if (full_power) {
+		ret = ov5670_runtime_resume(&client->dev);
+		if (ret) {
+			err_msg = "Power up failed";
+			goto error_print;
+		}
+
 		/* Check module identity */
 		ret = ov5670_identify_module(ov5670);
 		if (ret) {
 			err_msg = "ov5670_identify_module() error";
-			goto error_print;
+			goto error_power_off;
 		}
+
+		/* Set the device's state to active if it's in D0 state. */
+		pm_runtime_set_active(&client->dev);
 	}
 
 	mutex_init(&ov5670->mutex);
@@ -2611,9 +2660,6 @@  static int ov5670_probe(struct i2c_client *client)
 
 	ov5670->streaming = false;
 
-	/* Set the device's state to active if it's in D0 state. */
-	if (full_power)
-		pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
 	pm_runtime_idle(&client->dev);
 
@@ -2628,6 +2674,9 @@  static int ov5670_probe(struct i2c_client *client)
 error_mutex_destroy:
 	mutex_destroy(&ov5670->mutex);
 
+error_power_off:
+	ov5670_runtime_suspend(&client->dev);
+
 error_print:
 	dev_err(&client->dev, "%s: %s %d\n", __func__, err_msg, ret);
 
@@ -2644,11 +2693,13 @@  static void ov5670_remove(struct i2c_client *client)
 	v4l2_ctrl_handler_free(sd->ctrl_handler);
 	mutex_destroy(&ov5670->mutex);
 
+	ov5670_runtime_suspend(&client->dev);
 	pm_runtime_disable(&client->dev);
 }
 
 static const struct dev_pm_ops ov5670_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ov5670_suspend, ov5670_resume)
+	SET_RUNTIME_PM_OPS(ov5670_runtime_suspend, ov5670_runtime_resume, NULL)
 };
 
 #ifdef CONFIG_ACPI