@@ -589,6 +589,9 @@ struct ov13b10 {
/* Streaming on/off */
bool streaming;
+
+ /* True if the device has been identified */
+ bool identified;
};
#define to_ov13b10(_sd) container_of(_sd, struct ov13b10, sd)
@@ -1023,12 +1026,42 @@ ov13b10_set_pad_format(struct v4l2_subdev *sd,
return 0;
}
+/* Verify chip ID */
+static int ov13b10_identify_module(struct ov13b10 *ov13b)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
+ int ret;
+ u32 val;
+
+ if (ov13b->identified)
+ return 0;
+
+ ret = ov13b10_read_reg(ov13b, OV13B10_REG_CHIP_ID,
+ OV13B10_REG_VALUE_24BIT, &val);
+ if (ret)
+ return ret;
+
+ if (val != OV13B10_CHIP_ID) {
+ dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
+ OV13B10_CHIP_ID, val);
+ return -EIO;
+ }
+
+ ov13b->identified = true;
+
+ return 0;
+}
+
static int ov13b10_start_streaming(struct ov13b10 *ov13b)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
const struct ov13b10_reg_list *reg_list;
int ret, link_freq_index;
+ ret = ov13b10_identify_module(ov13b);
+ if (ret)
+ return ret;
+
/* Get out of from software reset */
ret = ov13b10_write_reg(ov13b, OV13B10_REG_SOFTWARE_RST,
OV13B10_REG_VALUE_08BIT, OV13B10_SOFTWARE_RST);
@@ -1144,27 +1177,6 @@ static int __maybe_unused ov13b10_resume(struct device *dev)
return ret;
}
-/* Verify chip ID */
-static int ov13b10_identify_module(struct ov13b10 *ov13b)
-{
- struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
- int ret;
- u32 val;
-
- ret = ov13b10_read_reg(ov13b, OV13B10_REG_CHIP_ID,
- OV13B10_REG_VALUE_24BIT, &val);
- if (ret)
- return ret;
-
- if (val != OV13B10_CHIP_ID) {
- dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
- OV13B10_CHIP_ID, val);
- return -EIO;
- }
-
- return 0;
-}
-
static const struct v4l2_subdev_video_ops ov13b10_video_ops = {
.s_stream = ov13b10_set_stream,
};
@@ -1379,6 +1391,7 @@ static int ov13b10_check_hwcfg(struct device *dev)
static int ov13b10_probe(struct i2c_client *client)
{
struct ov13b10 *ov13b;
+ bool full_power;
int ret;
/* Check HW config */
@@ -1395,11 +1408,14 @@ static int ov13b10_probe(struct i2c_client *client)
/* Initialize subdev */
v4l2_i2c_subdev_init(&ov13b->sd, client, &ov13b10_subdev_ops);
- /* Check module identity */
- ret = ov13b10_identify_module(ov13b);
- if (ret) {
- dev_err(&client->dev, "failed to find sensor: %d\n", ret);
- return ret;
+ full_power = acpi_dev_state_d0(&client->dev);
+ if (full_power) {
+ /* Check module identity */
+ ret = ov13b10_identify_module(ov13b);
+ if (ret) {
+ dev_err(&client->dev, "failed to find sensor: %d\n", ret);
+ return ret;
+ }
}
/* Set default mode to max resolution */
@@ -1431,7 +1447,10 @@ static int ov13b10_probe(struct i2c_client *client)
* Device is already turned on by i2c-core with ACPI domain PM.
* Enable runtime PM and turn off the device.
*/
- pm_runtime_set_active(&client->dev);
+
+ /* Set the device's state to active if it's in D0 state. */
+ if (full_power)
+ pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
pm_runtime_idle(&client->dev);
@@ -1480,6 +1499,7 @@ static struct i2c_driver ov13b10_i2c_driver = {
},
.probe_new = ov13b10_probe,
.remove = ov13b10_remove,
+ .flags = I2C_DRV_ACPI_WAIVE_D0_PROBE,
};
module_i2c_driver(ov13b10_i2c_driver);
Tell ACPI device PM code that the driver supports the device being in non-zero ACPI D state when the driver's probe function is entered. Also do identification on the first access of the device, whether in probe or when starting streaming. Signed-off-by: Arec Kao <arec.kao@intel.com> --- drivers/media/i2c/ov13b10.c | 74 +++++++++++++++++++++++-------------- 1 file changed, 47 insertions(+), 27 deletions(-)