diff mbox series

[02/21] media: i2c: imx258: Make image geometry meet sensor requirements

Message ID 20230530173000.3060865-3-dave.stevenson@raspberrypi.com (mailing list archive)
State New, archived
Headers show
Series imx258 improvements series | expand

Commit Message

Dave Stevenson May 30, 2023, 5:29 p.m. UTC
The output image is defined as being 4208x3118 pixels in size.
Y_ADD_STA register was set to 0, and Y_ADD_END to 3118, giving
3119 lines total.

The datasheet lists a requirement for Y_ADD_STA to be a multiple
of a power of 2 depending on binning/scaling mode (2 for full pixel,
4 for x2-bin/scale, 8 for (x2-bin)+(x2-subsample) or x4-bin, or 16
for (x4-bin)+(x2-subsample)).
(Y_ADD_END – Y_ADD_STA + 1) also has to be a similar power of 2.

The current configuration for the full res modes breaks that second
requirement, and we can't increase Y_ADD_STA to 1 to retain exactly
the same field of view as that then breaks the first requirement.
For the binned modes, they are worse off as 3118 is not a multiple of
4.

Increase the main mode to 4208x3120 so that it is the same FOV as the
binned modes, with Y_ADD_STA at 0.
Fix Y_ADD_STA and Y_ADD_END for the binned modes so that they meet the
sensor requirements.

This does change the Bayer order as the default configuration is for
H&V flips to be enabled, so readout is from Y_STA_END to Y_ADD_STA,
and this patch has changed Y_STA_END.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/imx258.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

Comments

Jacopo Mondi May 31, 2023, 3:09 p.m. UTC | #1
Hi Dave

On Tue, May 30, 2023 at 06:29:41PM +0100, Dave Stevenson wrote:
> The output image is defined as being 4208x3118 pixels in size.
> Y_ADD_STA register was set to 0, and Y_ADD_END to 3118, giving
> 3119 lines total.
>
> The datasheet lists a requirement for Y_ADD_STA to be a multiple
> of a power of 2 depending on binning/scaling mode (2 for full pixel,
> 4 for x2-bin/scale, 8 for (x2-bin)+(x2-subsample) or x4-bin, or 16
> for (x4-bin)+(x2-subsample)).
> (Y_ADD_END – Y_ADD_STA + 1) also has to be a similar power of 2.
>
> The current configuration for the full res modes breaks that second
> requirement, and we can't increase Y_ADD_STA to 1 to retain exactly
> the same field of view as that then breaks the first requirement.
> For the binned modes, they are worse off as 3118 is not a multiple of
> 4.
>
> Increase the main mode to 4208x3120 so that it is the same FOV as the
> binned modes, with Y_ADD_STA at 0.
> Fix Y_ADD_STA and Y_ADD_END for the binned modes so that they meet the
> sensor requirements.
>
> This does change the Bayer order as the default configuration is for
> H&V flips to be enabled, so readout is from Y_STA_END to Y_ADD_STA,
> and this patch has changed Y_STA_END.
>
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Good catch!
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>

> ---
>  drivers/media/i2c/imx258.c | 26 +++++++++++++-------------
>  1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
> index 6028579393b5..946b1a12971d 100644
> --- a/drivers/media/i2c/imx258.c
> +++ b/drivers/media/i2c/imx258.c
> @@ -111,7 +111,7 @@ struct imx258_mode {
>  	struct imx258_reg_list reg_list;
>  };
>
> -/* 4208x3118 needs 1267Mbps/lane, 4 lanes */
> +/* 4208x3120 needs 1267Mbps/lane, 4 lanes */
>  static const struct imx258_reg mipi_data_rate_1267mbps[] = {
>  	{ 0x0301, 0x05 },
>  	{ 0x0303, 0x02 },
> @@ -148,7 +148,7 @@ static const struct imx258_reg mipi_data_rate_640mbps[] = {
>  	{ 0x0823, 0x00 },
>  };
>
> -static const struct imx258_reg mode_4208x3118_regs[] = {
> +static const struct imx258_reg mode_4208x3120_regs[] = {
>  	{ 0x0136, 0x13 },
>  	{ 0x0137, 0x33 },
>  	{ 0x3051, 0x00 },
> @@ -210,7 +210,7 @@ static const struct imx258_reg mode_4208x3118_regs[] = {
>  	{ 0x0348, 0x10 },
>  	{ 0x0349, 0x6F },
>  	{ 0x034A, 0x0C },
> -	{ 0x034B, 0x2E },
> +	{ 0x034B, 0x2F },
>  	{ 0x0381, 0x01 },
>  	{ 0x0383, 0x01 },
>  	{ 0x0385, 0x01 },
> @@ -329,7 +329,7 @@ static const struct imx258_reg mode_2104_1560_regs[] = {
>  	{ 0x0348, 0x10 },
>  	{ 0x0349, 0x6F },
>  	{ 0x034A, 0x0C },
> -	{ 0x034B, 0x2E },
> +	{ 0x034B, 0x2F },
>  	{ 0x0381, 0x01 },
>  	{ 0x0383, 0x01 },
>  	{ 0x0385, 0x01 },
> @@ -448,7 +448,7 @@ static const struct imx258_reg mode_1048_780_regs[] = {
>  	{ 0x0348, 0x10 },
>  	{ 0x0349, 0x6F },
>  	{ 0x034A, 0x0C },
> -	{ 0x034B, 0x2E },
> +	{ 0x034B, 0x2F },
>  	{ 0x0381, 0x01 },
>  	{ 0x0383, 0x01 },
>  	{ 0x0385, 0x01 },
> @@ -562,12 +562,12 @@ static const struct imx258_link_freq_config link_freq_configs[] = {
>  static const struct imx258_mode supported_modes[] = {
>  	{
>  		.width = 4208,
> -		.height = 3118,
> +		.height = 3120,
>  		.vts_def = IMX258_VTS_30FPS,
>  		.vts_min = IMX258_VTS_30FPS,
>  		.reg_list = {
> -			.num_of_regs = ARRAY_SIZE(mode_4208x3118_regs),
> -			.regs = mode_4208x3118_regs,
> +			.num_of_regs = ARRAY_SIZE(mode_4208x3120_regs),
> +			.regs = mode_4208x3120_regs,
>  		},
>  		.link_freq_index = IMX258_LINK_FREQ_1267MBPS,
>  	},
> @@ -710,7 +710,7 @@ static int imx258_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>  	/* Initialize try_fmt */
>  	try_fmt->width = supported_modes[0].width;
>  	try_fmt->height = supported_modes[0].height;
> -	try_fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	try_fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
>  	try_fmt->field = V4L2_FIELD_NONE;
>
>  	return 0;
> @@ -822,7 +822,7 @@ static int imx258_enum_mbus_code(struct v4l2_subdev *sd,
>  	if (code->index > 0)
>  		return -EINVAL;
>
> -	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
>
>  	return 0;
>  }
> @@ -834,7 +834,7 @@ static int imx258_enum_frame_size(struct v4l2_subdev *sd,
>  	if (fse->index >= ARRAY_SIZE(supported_modes))
>  		return -EINVAL;
>
> -	if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
> +	if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10)
>  		return -EINVAL;
>
>  	fse->min_width = supported_modes[fse->index].width;
> @@ -850,7 +850,7 @@ static void imx258_update_pad_format(const struct imx258_mode *mode,
>  {
>  	fmt->format.width = mode->width;
>  	fmt->format.height = mode->height;
> -	fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
>  	fmt->format.field = V4L2_FIELD_NONE;
>  }
>
> @@ -898,7 +898,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd,
>  	mutex_lock(&imx258->mutex);
>
>  	/* Only one raw bayer(GBRG) order is supported */
> -	fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
>
>  	mode = v4l2_find_nearest_size(supported_modes,
>  		ARRAY_SIZE(supported_modes), width, height,
> --
> 2.25.1
>
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index 6028579393b5..946b1a12971d 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -111,7 +111,7 @@  struct imx258_mode {
 	struct imx258_reg_list reg_list;
 };
 
-/* 4208x3118 needs 1267Mbps/lane, 4 lanes */
+/* 4208x3120 needs 1267Mbps/lane, 4 lanes */
 static const struct imx258_reg mipi_data_rate_1267mbps[] = {
 	{ 0x0301, 0x05 },
 	{ 0x0303, 0x02 },
@@ -148,7 +148,7 @@  static const struct imx258_reg mipi_data_rate_640mbps[] = {
 	{ 0x0823, 0x00 },
 };
 
-static const struct imx258_reg mode_4208x3118_regs[] = {
+static const struct imx258_reg mode_4208x3120_regs[] = {
 	{ 0x0136, 0x13 },
 	{ 0x0137, 0x33 },
 	{ 0x3051, 0x00 },
@@ -210,7 +210,7 @@  static const struct imx258_reg mode_4208x3118_regs[] = {
 	{ 0x0348, 0x10 },
 	{ 0x0349, 0x6F },
 	{ 0x034A, 0x0C },
-	{ 0x034B, 0x2E },
+	{ 0x034B, 0x2F },
 	{ 0x0381, 0x01 },
 	{ 0x0383, 0x01 },
 	{ 0x0385, 0x01 },
@@ -329,7 +329,7 @@  static const struct imx258_reg mode_2104_1560_regs[] = {
 	{ 0x0348, 0x10 },
 	{ 0x0349, 0x6F },
 	{ 0x034A, 0x0C },
-	{ 0x034B, 0x2E },
+	{ 0x034B, 0x2F },
 	{ 0x0381, 0x01 },
 	{ 0x0383, 0x01 },
 	{ 0x0385, 0x01 },
@@ -448,7 +448,7 @@  static const struct imx258_reg mode_1048_780_regs[] = {
 	{ 0x0348, 0x10 },
 	{ 0x0349, 0x6F },
 	{ 0x034A, 0x0C },
-	{ 0x034B, 0x2E },
+	{ 0x034B, 0x2F },
 	{ 0x0381, 0x01 },
 	{ 0x0383, 0x01 },
 	{ 0x0385, 0x01 },
@@ -562,12 +562,12 @@  static const struct imx258_link_freq_config link_freq_configs[] = {
 static const struct imx258_mode supported_modes[] = {
 	{
 		.width = 4208,
-		.height = 3118,
+		.height = 3120,
 		.vts_def = IMX258_VTS_30FPS,
 		.vts_min = IMX258_VTS_30FPS,
 		.reg_list = {
-			.num_of_regs = ARRAY_SIZE(mode_4208x3118_regs),
-			.regs = mode_4208x3118_regs,
+			.num_of_regs = ARRAY_SIZE(mode_4208x3120_regs),
+			.regs = mode_4208x3120_regs,
 		},
 		.link_freq_index = IMX258_LINK_FREQ_1267MBPS,
 	},
@@ -710,7 +710,7 @@  static int imx258_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 	/* Initialize try_fmt */
 	try_fmt->width = supported_modes[0].width;
 	try_fmt->height = supported_modes[0].height;
-	try_fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	try_fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
 	try_fmt->field = V4L2_FIELD_NONE;
 
 	return 0;
@@ -822,7 +822,7 @@  static int imx258_enum_mbus_code(struct v4l2_subdev *sd,
 	if (code->index > 0)
 		return -EINVAL;
 
-	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
 
 	return 0;
 }
@@ -834,7 +834,7 @@  static int imx258_enum_frame_size(struct v4l2_subdev *sd,
 	if (fse->index >= ARRAY_SIZE(supported_modes))
 		return -EINVAL;
 
-	if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+	if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10)
 		return -EINVAL;
 
 	fse->min_width = supported_modes[fse->index].width;
@@ -850,7 +850,7 @@  static void imx258_update_pad_format(const struct imx258_mode *mode,
 {
 	fmt->format.width = mode->width;
 	fmt->format.height = mode->height;
-	fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
 	fmt->format.field = V4L2_FIELD_NONE;
 }
 
@@ -898,7 +898,7 @@  static int imx258_set_pad_format(struct v4l2_subdev *sd,
 	mutex_lock(&imx258->mutex);
 
 	/* Only one raw bayer(GBRG) order is supported */
-	fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
 
 	mode = v4l2_find_nearest_size(supported_modes,
 		ARRAY_SIZE(supported_modes), width, height,