Message ID | 20230607164712.63579-3-hdegoede@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | media: ov2680: Bugfixes + ACPI + selection(crop-tgt) API support | expand |
Hi Hans On 07/06/2023 17:46, Hans de Goede wrote: > The index into ov2680_hv_flip_bayer_order[] should be 0-3, but > ov2680_bayer_order() was using 0 + BIT(2) + (BIT(2) << 1) as > max index, while the intention was to use: 0 + 1 + 2 as max index. > > Fix the index calculation in ov2680_bayer_order(), while at it > also just use the ctrl values rather then reading them back using > a slow i2c-read transaction. > > This also allows making the function void, since there now are > no more i2c-reads to error check. > > Note the check for the ctrls being NULL is there to allow > adding an ov2680_fill_format() helper later, which will call > ov2680_set_bayer_order() during probe() before the ctrls are created. > > Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> > drivers/media/i2c/ov2680.c | 27 ++++++++++----------------- > 1 file changed, 10 insertions(+), 17 deletions(-) > > diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c > index 02204e185e2f..9a9c90c8a949 100644 > --- a/drivers/media/i2c/ov2680.c > +++ b/drivers/media/i2c/ov2680.c > @@ -315,26 +315,17 @@ static void ov2680_power_down(struct ov2680_dev *sensor) > usleep_range(5000, 10000); > } > > -static int ov2680_bayer_order(struct ov2680_dev *sensor) > +static void ov2680_set_bayer_order(struct ov2680_dev *sensor) > { > - u32 format1; > - u32 format2; > - u32 hv_flip; > - int ret; > + int hv_flip = 0; > > - ret = ov2680_read_reg(sensor, OV2680_REG_FORMAT1, &format1); > - if (ret < 0) > - return ret; > + if (sensor->ctrls.vflip && sensor->ctrls.vflip->val) > + hv_flip += 1; > > - ret = ov2680_read_reg(sensor, OV2680_REG_FORMAT2, &format2); > - if (ret < 0) > - return ret; > - > - hv_flip = (format2 & BIT(2) << 1) | (format1 & BIT(2)); > + if (sensor->ctrls.hflip && sensor->ctrls.hflip->val) > + hv_flip += 2; > > sensor->fmt.code = ov2680_hv_flip_bayer_order[hv_flip]; > - > - return 0; > } > > static int ov2680_vflip_enable(struct ov2680_dev *sensor) > @@ -345,7 +336,8 @@ static int ov2680_vflip_enable(struct ov2680_dev *sensor) > if (ret < 0) > return ret; > > - return ov2680_bayer_order(sensor); > + ov2680_set_bayer_order(sensor); > + return 0; > } > > static int ov2680_vflip_disable(struct ov2680_dev *sensor) > @@ -378,7 +370,8 @@ static int ov2680_hflip_disable(struct ov2680_dev *sensor) > if (ret < 0) > return ret; > > - return ov2680_bayer_order(sensor); > + ov2680_set_bayer_order(sensor); > + return 0; > } > > static int ov2680_test_pattern_set(struct ov2680_dev *sensor, int value)
diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c index 02204e185e2f..9a9c90c8a949 100644 --- a/drivers/media/i2c/ov2680.c +++ b/drivers/media/i2c/ov2680.c @@ -315,26 +315,17 @@ static void ov2680_power_down(struct ov2680_dev *sensor) usleep_range(5000, 10000); } -static int ov2680_bayer_order(struct ov2680_dev *sensor) +static void ov2680_set_bayer_order(struct ov2680_dev *sensor) { - u32 format1; - u32 format2; - u32 hv_flip; - int ret; + int hv_flip = 0; - ret = ov2680_read_reg(sensor, OV2680_REG_FORMAT1, &format1); - if (ret < 0) - return ret; + if (sensor->ctrls.vflip && sensor->ctrls.vflip->val) + hv_flip += 1; - ret = ov2680_read_reg(sensor, OV2680_REG_FORMAT2, &format2); - if (ret < 0) - return ret; - - hv_flip = (format2 & BIT(2) << 1) | (format1 & BIT(2)); + if (sensor->ctrls.hflip && sensor->ctrls.hflip->val) + hv_flip += 2; sensor->fmt.code = ov2680_hv_flip_bayer_order[hv_flip]; - - return 0; } static int ov2680_vflip_enable(struct ov2680_dev *sensor) @@ -345,7 +336,8 @@ static int ov2680_vflip_enable(struct ov2680_dev *sensor) if (ret < 0) return ret; - return ov2680_bayer_order(sensor); + ov2680_set_bayer_order(sensor); + return 0; } static int ov2680_vflip_disable(struct ov2680_dev *sensor) @@ -378,7 +370,8 @@ static int ov2680_hflip_disable(struct ov2680_dev *sensor) if (ret < 0) return ret; - return ov2680_bayer_order(sensor); + ov2680_set_bayer_order(sensor); + return 0; } static int ov2680_test_pattern_set(struct ov2680_dev *sensor, int value)
The index into ov2680_hv_flip_bayer_order[] should be 0-3, but ov2680_bayer_order() was using 0 + BIT(2) + (BIT(2) << 1) as max index, while the intention was to use: 0 + 1 + 2 as max index. Fix the index calculation in ov2680_bayer_order(), while at it also just use the ctrl values rather then reading them back using a slow i2c-read transaction. This also allows making the function void, since there now are no more i2c-reads to error check. Note the check for the ctrls being NULL is there to allow adding an ov2680_fill_format() helper later, which will call ov2680_set_bayer_order() during probe() before the ctrls are created. Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/media/i2c/ov2680.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-)