| Message ID | 20230726083810.232100-2-gatien.chevallier@foss.st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Introduce STM32 Firewall framework | expand |
On Wed, Jul 26, 2023 at 10:38:00AM +0200, Gatien Chevallier wrote: > From: Oleksii Moisieiev <Oleksii_Moisieiev@epam.com> > > Introducing of the common device controller bindings for the controller > provider and consumer devices. Those bindings are intended to allow > divided system on chip into muliple domains, that can be used to > configure hardware permissions. > > Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com> > --- > .../feature-domain-controller.yaml | 84 +++++++++++++++++++ > 1 file changed, 84 insertions(+) > create mode 100644 Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml What is the [IGNORE] prefix for?
Hello Greg, On 7/26/23 10:48, Greg KH wrote: > On Wed, Jul 26, 2023 at 10:38:00AM +0200, Gatien Chevallier wrote: >> From: Oleksii Moisieiev <Oleksii_Moisieiev@epam.com> >> >> Introducing of the common device controller bindings for the controller >> provider and consumer devices. Those bindings are intended to allow >> divided system on chip into muliple domains, that can be used to >> configure hardware permissions. >> >> Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com> >> --- >> .../feature-domain-controller.yaml | 84 +++++++++++++++++++ >> 1 file changed, 84 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml > > What is the [IGNORE] prefix for? > I put this prefix to specify that the review for this patch should not be done on this thread. It is still under review on the thread linked in the cover-letter. This series aims to provide a use-case for this binding so its scope can be better defined. Best regards, Gatien
On Wed, 26 Jul 2023 10:38:00 +0200, Gatien Chevallier wrote: > From: Oleksii Moisieiev <Oleksii_Moisieiev@epam.com> > > Introducing of the common device controller bindings for the controller > provider and consumer devices. Those bindings are intended to allow > divided system on chip into muliple domains, that can be used to > configure hardware permissions. > > Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com> > --- > .../feature-domain-controller.yaml | 84 +++++++++++++++++++ > 1 file changed, 84 insertions(+) > create mode 100644 Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml: title: 'Generic Domain Controller bindings' should not be valid under {'pattern': '([Bb]inding| [Ss]chema)'} hint: Everything is a binding/schema, no need to say it. Describe what hardware the binding is for. from schema $id: http://devicetree.org/meta-schemas/core.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230726083810.232100-2-gatien.chevallier@foss.st.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml b/Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml new file mode 100644 index 000000000000..90a7c38c833c --- /dev/null +++ b/Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/feature-controllers/feature-domain-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Domain Controller bindings + +maintainers: + - Oleksii Moisieiev <oleksii_moisieiev@epam.com> + +description: |+ + Common Feature Domains Controller bindings properties + + Domain controllers allow to divided system on chip into multiple feature + domains that can be used to select by who hardware blocks could be accessed. + A feature domain could be a cluster of CPUs (or coprocessors), a range of + addresses or a group of hardware blocks. + + This device tree bindings can be used to bind feature domain consumer devices + with their feature domains provided by feature-domains controllers. + Feature omain controller provider can be represened by any node in the + device tree and can provide one or more configuration parameters, needed to + control parameters of the consumer device. A consumer node can refer to the + provider by phandle and a set of phandle arguments, specified by + '#feature-domain-cells' property in the device controller provider node. + + Device controllers are typically used to set the permissions of the hardware + block. The contents of the feature-domains configuration properties are + defined by the binding for the individual feature-domains controller device. + + Each node can be a consumer for the several providers. The first + configuration of 'feature-domains' or the one named 'default' is applied + before probing the device itself. + +# always select the core schema +select: true + +properties: + '#feature-domain-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of cells in a feature-domains controller specifier; + Can be any value as specified by device tree binding documentation + of a particular provider. + + feature-domain-controller: + description: + Indicates that the node is feature-domain-controller provider. + + feature-domain-names: + $ref: '/schemas/types.yaml#/definitions/string-array' + description: + A list of feature-domains names, sorted in the same order as + feature-domains entries. Consumer drivers will use feature-domain-names + to match with existing feature-domains entries. + + feature-domains: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: + A list of feature-domains controller specifiers, as defined by the + bindings of the feature-domain-controller provider. + +additionalProperties: true + +examples: + - | + ctrl0: ctrl@100 { + feature-domain-controller; + reg = <0x100 0x10>; + #feature-domain-cells = <2>; + }; + + ctrl1: ctrl@110 { + feature-domain-controller; + reg = <0x110 0x10>; + #feature-domain-cells = <3>; + }; + + foo@0 { + reg = <0x0 0x1>; + feature-domains = <&ctrl0 1 2>, <&ctrl1 3 4 5>; + feature-domain-names = "default", "unbind"; + };