diff mbox series

[v3,9/9] media: i2c: ds90ub960: Rename RXPORT_MODE_CSI2_ASYNC to RXPORT_MODE_CSI2_NONSYNC

Message ID 20230731-fpdlink-additions-v3-9-8acfc49c215a@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series media: i2c: ds90ub9xx: Misc improvements | expand

Commit Message

Tomi Valkeinen July 31, 2023, 1:24 p.m. UTC
FPD-Link has an operating mode that used to be called "asynchronous" in
the hardware documentation, but that has been changed to non-synchronous
already quite a while back. The ub960 driver still had one instance of
the old naming, so let's rename it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/media/i2c/ds90ub960.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index c29db59e340b..f619c23e084a 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -415,8 +415,8 @@  enum ub960_rxport_mode {
 	RXPORT_MODE_RAW12_HF = 1,
 	RXPORT_MODE_RAW12_LF = 2,
 	RXPORT_MODE_CSI2_SYNC = 3,
-	RXPORT_MODE_CSI2_ASYNC = 4,
-	RXPORT_MODE_LAST = RXPORT_MODE_CSI2_ASYNC,
+	RXPORT_MODE_CSI2_NONSYNC = 4,
+	RXPORT_MODE_LAST = RXPORT_MODE_CSI2_NONSYNC,
 };
 
 enum ub960_rxport_cdr {
@@ -1609,7 +1609,7 @@  static unsigned long ub960_calc_bc_clk_rate_ub960(struct ub960_data *priv,
 		div = 1;
 		break;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		mult = 2;
 		div = 5;
 		break;
@@ -1633,7 +1633,7 @@  static unsigned long ub960_calc_bc_clk_rate_ub9702(struct ub960_data *priv,
 	case RXPORT_MODE_CSI2_SYNC:
 		return 47187500;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		return 9437500;
 
 	default:
@@ -1840,7 +1840,7 @@  static void ub960_init_rx_port_ub960(struct ub960_data *priv,
 		bc_freq_val = 0;
 		break;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		bc_freq_val = 2;
 		break;
 
@@ -1878,7 +1878,7 @@  static void ub960_init_rx_port_ub960(struct ub960_data *priv,
 		return;
 
 	case RXPORT_MODE_CSI2_SYNC:
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		/* CSI-2 Mode (DS90UB953-Q1 compatible) */
 		ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, 0x3,
 					 0x0);
@@ -1938,7 +1938,7 @@  static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv,
 		fpd_func_mode = 2;
 		break;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		bc_freq_val = 2;
 		fpd_func_mode = 2;
 		break;
@@ -2032,7 +2032,7 @@  static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv,
 		bc_freq_val = 6;
 		break;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		bc_freq_val = 2;
 		break;
 
@@ -2098,7 +2098,7 @@  static void ub960_init_rx_port_ub9702(struct ub960_data *priv,
 		return;
 
 	case RXPORT_MODE_CSI2_SYNC:
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 
 		break;
 	}
@@ -2444,7 +2444,7 @@  static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
 
 		/* For the rest, we are only interested in parallel busses */
 		if (rxport->rx_mode == RXPORT_MODE_CSI2_SYNC ||
-		    rxport->rx_mode == RXPORT_MODE_CSI2_ASYNC)
+		    rxport->rx_mode == RXPORT_MODE_CSI2_NONSYNC)
 			continue;
 
 		if (rx_data[nport].num_streams > 2)
@@ -2508,7 +2508,7 @@  static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
 			break;
 
 		case RXPORT_MODE_CSI2_SYNC:
-		case RXPORT_MODE_CSI2_ASYNC:
+		case RXPORT_MODE_CSI2_NONSYNC:
 			if (!priv->hw_data->is_ub9702) {
 				/* Map all VCs from this port to the same VC */
 				ub960_rxport_write(priv, nport, UB960_RR_CSI_VC_MAP,