diff mbox series

[RFC,v2,10/37] drm/connector: hdmi: Compute bpc and format automatically

Message ID 20230920-kms-hdmi-connector-state-v2-10-17932daddd7d@kernel.org (mailing list archive)
State New, archived
Headers show
Series drm/connector: Create HDMI Connector infrastructure | expand

Commit Message

Maxime Ripard Sept. 20, 2023, 2:35 p.m. UTC
Now that we have all the infrastructure needed, we can add some code
that will, for a given connector state and mode, compute the best output
format and bpc.

The algorithm is the same one than the one already found in i915 and
vc4.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 174 +++++++++++++++++++++++++++++-
 1 file changed, 171 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 9539b952fd8c..2f85422cccd4 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -635,6 +635,96 @@  connector_state_get_adjusted_mode(const struct drm_connector_state *state)
 	return &crtc_state->adjusted_mode;
 }
 
+static bool
+sink_supports_format_bpc(const struct drm_connector *connector,
+			 const struct drm_display_info *info,
+			 const struct drm_display_mode *mode,
+			 unsigned int format, unsigned int bpc)
+{
+	struct drm_device *dev = connector->dev;
+	u8 vic = drm_match_cea_mode(mode);
+
+	if (vic == 1 && bpc != 8) {
+		drm_dbg(dev, "VIC1 requires a bpc of 8, got %u\n", bpc);
+		return false;
+	}
+
+	if (!info->is_hdmi &&
+	    (format != HDMI_COLORSPACE_RGB || bpc != 8)) {
+		drm_dbg(dev, "DVI Monitors require an RGB output at 8 bpc\n");
+		return false;
+	}
+
+	if (!(connector->hdmi.supported_formats & BIT(format))) {
+		drm_dbg(dev, "%s format unsupported by the connector.\n",
+			drm_hdmi_connector_get_output_format_name(format));
+		return false;
+	}
+
+	switch (format) {
+	case HDMI_COLORSPACE_RGB:
+		drm_dbg(dev, "RGB Format, checking the constraints.\n");
+
+		if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444))
+			return false;
+
+		if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) {
+			drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
+			return false;
+		}
+
+		if (bpc == 12 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36)) {
+			drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
+			return false;
+		}
+
+		drm_dbg(dev, "RGB format supported in that configuration.\n");
+
+		return true;
+
+	case HDMI_COLORSPACE_YUV422:
+		drm_dbg(dev, "YUV422 format, checking the constraints.\n");
+
+		if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) {
+			drm_dbg(dev, "Sink doesn't support YUV422.\n");
+			return false;
+		}
+
+		if (bpc != 12) {
+			drm_dbg(dev, "YUV422 only supports 12 bpc.\n");
+			return false;
+		}
+
+		drm_dbg(dev, "YUV422 format supported in that configuration.\n");
+
+		return true;
+
+	case HDMI_COLORSPACE_YUV444:
+		drm_dbg(dev, "YUV444 format, checking the constraints.\n");
+
+		if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR444)) {
+			drm_dbg(dev, "Sink doesn't support YUV444.\n");
+			return false;
+		}
+
+		if (bpc == 10 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_30)) {
+			drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
+			return false;
+		}
+
+		if (bpc == 12 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_36)) {
+			drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
+			return false;
+		}
+
+		drm_dbg(dev, "YUV444 format supported in that configuration.\n");
+
+		return true;
+	}
+
+	return false;
+}
+
 static enum drm_mode_status
 hdmi_clock_valid(const struct drm_connector *connector,
 		 const struct drm_display_mode *mode,
@@ -669,6 +759,86 @@  hdmi_compute_clock(const struct drm_connector *connector,
 	return 0;
 }
 
+static bool
+hdmi_try_format_bpc(const struct drm_connector *connector,
+		    struct drm_connector_state *state,
+		    const struct drm_display_mode *mode,
+		    unsigned int bpc, enum hdmi_colorspace fmt)
+{
+	const struct drm_display_info *info = &connector->display_info;
+	struct drm_device *dev = connector->dev;
+	int ret;
+
+	drm_dbg(dev, "Trying output format %s\n",
+		drm_hdmi_connector_get_output_format_name(fmt));
+
+	if (!sink_supports_format_bpc(connector, info, mode, fmt, bpc))
+		return false;
+
+	ret = hdmi_compute_clock(connector, state, mode, bpc, fmt);
+	if (ret)
+		return false;
+
+	return true;
+}
+
+static int
+hdmi_compute_format(const struct drm_connector *connector,
+		    struct drm_connector_state *state,
+		    const struct drm_display_mode *mode,
+		    unsigned int bpc)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (hdmi_try_format_bpc(connector, state, mode, bpc, HDMI_COLORSPACE_RGB)) {
+		state->hdmi.output_format = HDMI_COLORSPACE_RGB;
+		return 0;
+	}
+
+	if (hdmi_try_format_bpc(connector, state, mode, bpc, HDMI_COLORSPACE_YUV422)) {
+		state->hdmi.output_format = HDMI_COLORSPACE_YUV422;
+		return 0;
+	}
+
+	drm_dbg(dev, "Failed. No Format Supported for that bpc count.\n");
+
+	return -EINVAL;
+}
+
+static int
+hdmi_compute_config(const struct drm_connector *connector,
+		    struct drm_connector_state *state,
+		    const struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+	unsigned int max_bpc = clamp_t(unsigned int,
+				       state->max_bpc,
+				       8, connector->max_bpc);
+	unsigned int bpc;
+	int ret;
+
+	for (bpc = max_bpc; bpc >= 8; bpc -= 2) {
+		drm_dbg(dev, "Trying with a %d bpc output\n", bpc);
+
+		ret = hdmi_compute_format(connector, state, mode, bpc);
+		if (ret)
+			continue;
+
+		state->hdmi.output_bpc = bpc;
+
+		drm_dbg(dev,
+			"Mode %ux%u @ %uHz: Found configuration: bpc: %u, fmt: %s, clock: %llu\n",
+			mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode),
+			state->hdmi.output_bpc,
+			drm_hdmi_connector_get_output_format_name(state->hdmi.output_format),
+			state->hdmi.tmds_char_rate);
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 /**
  * drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
  * @connector: DRM Connector
@@ -692,9 +862,7 @@  int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
 		connector_state_get_adjusted_mode(new_state);
 	int ret;
 
-	ret = hdmi_compute_clock(connector, new_state, mode,
-				 new_state->hdmi.output_bpc,
-				 new_state->hdmi.output_format);
+	ret = hdmi_compute_config(connector, new_state, mode);
 	if (!ret)
 		return ret;