diff mbox series

[v2,1/2] media: dt-bindings: Add OmniVision OV64A40

Message ID 20231114182831.220823-2-jacopo.mondi@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series media: i2c: Add driver for OmniVision OV64A40 | expand

Commit Message

Jacopo Mondi Nov. 14, 2023, 6:28 p.m. UTC
Add bindings for OmniVision OV64A40.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
---
 .../bindings/media/i2c/ovti,ov64a40.yaml      | 98 +++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml

Comments

Krzysztof Kozlowski Nov. 14, 2023, 9:30 p.m. UTC | #1
On 14/11/2023 19:28, Jacopo Mondi wrote:
> Add bindings for OmniVision OV64A40.
> 
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.

You missed at least devicetree list (maybe more), so this won't be
tested by automated tooling. Performing review on untested code might be
a waste of time, thus I will skip this patch entirely till you follow
the process allowing the patch to be tested.

Please kindly resend and include all necessary To/Cc entries.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
new file mode 100644
index 000000000000..15fbe86bba10
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
@@ -0,0 +1,98 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV64A40 Image Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov64a40
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  dvdd-supply:
+    description: Digital core voltage supply, 1.1 volts
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          bus-type:
+            enum:
+              - 1 # MIPI CSI-2 C-PHY
+              - 4 # MIPI CSI-2 D-PHY
+          data-lanes: true
+          link-frequencies: true
+          clock-noncontinuous: true
+          remote-endpoint: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@36 {
+              compatible = "ovti,ov64a40";
+              reg = <0x36>;
+              clocks = <&camera_clk>;
+              dovdd-supply = <&vgen4_reg>;
+              avdd-supply = <&vgen3_reg>;
+              dvdd-supply = <&vgen2_reg>;
+              powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+              rotation = <180>;
+              orientation = <2>;
+
+              port {
+                  endpoint {
+                      remote-endpoint = <&mipi_csi2_in>;
+                      bus-type = <4>;
+                      data-lanes = <1 2 3 4>;
+                      link-frequencies = /bits/ 64 <456000000>;
+                  };
+              };
+          };
+      };
+
+...