new file mode 100644
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxy Core 1/5'' UXGA CMOS Image Sensor
+
+maintainers:
+ - Alain Volmat <alain.volmat@foss.st.com>
+
+description:
+ The Galaxy Core GC2145 is a 2 Megapixel CMOS image sensor, for mobile
+ phone camera applications and digital camera products. GC2145 incorporates a
+ 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
+ processor allowing AE/AWB/interpolation/de-noise/color-conversion and
+ gamma correction. Bayer RGB, RGB565 and YCbCr 4:2:2 can be provided by the
+ sensor. It is programmable through an I2C interface. Image data is sent
+ either through a parallel interface or through MIPI CSI-2.
+
+allOf:
+ - $ref: ../video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: galaxycore,gc2145
+
+ reg:
+ const: 0x3c
+
+ clocks:
+ maxItems: 1
+
+ powerdown-gpios:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ iovdd-supply:
+ description: Power Supply for I/O circuits (1.7 - 3V).
+
+ avdd-supply:
+ description: Power for analog circuit/sensor array (2.7 - 3V).
+
+ dvdd-supply:
+ description: Power for digital core (1.7 - 1.9V).
+
+ orientation: true
+
+ rotation: true
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ link-frequencies: true
+
+ required:
+ - link-frequencies
+
+ required:
+ - endpoint
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - powerdown-gpios
+ - reset-gpios
+ - iovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@3c {
+ compatible = "galaxycore,gc2145";
+ reg = <0x3c>;
+ clocks = <&clk_ext_camera>;
+ iovdd-supply = <&scmi_v3v3_sw>;
+ avdd-supply = <&scmi_v3v3_sw>;
+ dvdd-supply = <&scmi_v3v3_sw>;
+ powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+ reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&mipid02_0>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <120000000 192000000 240000000>;
+ };
+ };
+ };
+ };
+
+...