| Message ID | 20231128100047.17529-10-hdegoede@redhat.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | media: ov2740: reset GPIO, clk and 180 MHz link-frequency support | expand |
diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c index e38198e259c0..f980e3125a7b 100644 --- a/drivers/media/pci/intel/ipu-bridge.c +++ b/drivers/media/pci/intel/ipu-bridge.c @@ -53,7 +53,7 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = { /* Omnivision ov8856 */ IPU_SENSOR_CONFIG("OVTI8856", 3, 180000000, 360000000, 720000000), /* Omnivision ov2740 */ - IPU_SENSOR_CONFIG("INT3474", 1, 360000000), + IPU_SENSOR_CONFIG("INT3474", 1, 180000000), /* Hynix hi556 */ IPU_SENSOR_CONFIG("INT3537", 1, 437000000), /* Omnivision ov13b10 */
The only known devices that use an ov2740 sensor in combination with the ipu-bridge code are various Lenovo ThinkPad models, which all need the link-frequency to be 180 MHz for things to work properly. The ov2740 driver used to only support 360 MHz link-frequency, which is why the ipu-bridge entry used 360 MHz, but now the ov2740 driver has been extended to also support 180 MHz. The ov2740 is actually used with 360 MHz link-frequency on Chromebooks. On Chromebooks the camera/sensor fwnode graph is part of the ACPI tables. The ipu-bridge code is used to dynamically generate the graph when it is missing, so it is not used on Chromebooks and the ov2740 will keep using 360 MHz link-frequency there as before. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/media/pci/intel/ipu-bridge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)