@@ -3723,12 +3723,10 @@ void atomisp_get_padding(struct atomisp_device *isp, u32 width, u32 height,
static int atomisp_set_crop(struct atomisp_device *isp,
const struct v4l2_mbus_framefmt *format,
+ struct v4l2_subdev_state *sd_state,
int which)
{
struct atomisp_input_subdev *input = &isp->inputs[isp->asd.input_curr];
- struct v4l2_subdev_state pad_state = {
- .pads = &input->pad_cfg,
- };
struct v4l2_subdev_selection sel = {
.which = which,
.target = V4L2_SEL_TGT_CROP,
@@ -3754,7 +3752,7 @@ static int atomisp_set_crop(struct atomisp_device *isp,
sel.r.left = ((input->native_rect.width - sel.r.width) / 2) & ~1;
sel.r.top = ((input->native_rect.height - sel.r.height) / 2) & ~1;
- ret = v4l2_subdev_call(input->camera, pad, set_selection, &pad_state, &sel);
+ ret = v4l2_subdev_call(input->camera, pad, set_selection, sd_state, &sel);
if (ret)
dev_err(isp->dev, "Error setting crop to %ux%u @%ux%u: %d\n",
sel.r.width, sel.r.height, sel.r.left, sel.r.top, ret);
@@ -3770,9 +3768,6 @@ int atomisp_try_fmt(struct atomisp_device *isp, struct v4l2_pix_format *f,
const struct atomisp_format_bridge *fmt, *snr_fmt;
struct atomisp_sub_device *asd = &isp->asd;
struct atomisp_input_subdev *input = &isp->inputs[asd->input_curr];
- struct v4l2_subdev_state pad_state = {
- .pads = &input->pad_cfg,
- };
struct v4l2_subdev_format format = {
.which = V4L2_SUBDEV_FORMAT_TRY,
};
@@ -3809,11 +3804,16 @@ int atomisp_try_fmt(struct atomisp_device *isp, struct v4l2_pix_format *f,
dev_dbg(isp->dev, "try_mbus_fmt: asking for %ux%u\n",
format.format.width, format.format.height);
- ret = atomisp_set_crop(isp, &format.format, V4L2_SUBDEV_FORMAT_TRY);
- if (ret)
- return ret;
+ v4l2_subdev_lock_state(input->try_sd_state);
+
+ ret = atomisp_set_crop(isp, &format.format, input->try_sd_state,
+ V4L2_SUBDEV_FORMAT_TRY);
+ if (ret == 0)
+ ret = v4l2_subdev_call(input->camera, pad, set_fmt,
+ input->try_sd_state, &format);
+
+ v4l2_subdev_unlock_state(input->try_sd_state);
- ret = v4l2_subdev_call(input->camera, pad, set_fmt, &pad_state, &format);
if (ret)
return ret;
@@ -4238,9 +4238,7 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev, const struct v4l2_p
struct atomisp_device *isp = asd->isp;
struct atomisp_input_subdev *input = &isp->inputs[asd->input_curr];
const struct atomisp_format_bridge *format;
- struct v4l2_subdev_state pad_state = {
- .pads = &input->pad_cfg,
- };
+ struct v4l2_subdev_state *act_sd_state;
struct v4l2_subdev_format vformat = {
.which = V4L2_SUBDEV_FORMAT_TRY,
};
@@ -4268,12 +4266,18 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev, const struct v4l2_p
/* Disable dvs if resolution can't be supported by sensor */
if (asd->params.video_dis_en && asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO) {
- ret = atomisp_set_crop(isp, &vformat.format, V4L2_SUBDEV_FORMAT_TRY);
- if (ret)
- return ret;
+ v4l2_subdev_lock_state(input->try_sd_state);
+
+ ret = atomisp_set_crop(isp, &vformat.format, input->try_sd_state,
+ V4L2_SUBDEV_FORMAT_TRY);
+ if (ret == 0) {
+ vformat.which = V4L2_SUBDEV_FORMAT_TRY;
+ ret = v4l2_subdev_call(input->camera, pad, set_fmt,
+ input->try_sd_state, &vformat);
+ }
+
+ v4l2_subdev_unlock_state(input->try_sd_state);
- vformat.which = V4L2_SUBDEV_FORMAT_TRY;
- ret = v4l2_subdev_call(input->camera, pad, set_fmt, &pad_state, &vformat);
if (ret)
return ret;
@@ -4291,12 +4295,18 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev, const struct v4l2_p
}
}
- ret = atomisp_set_crop(isp, &vformat.format, V4L2_SUBDEV_FORMAT_ACTIVE);
- if (ret)
- return ret;
+ act_sd_state = v4l2_subdev_lock_and_get_active_state(input->camera);
+
+ ret = atomisp_set_crop(isp, &vformat.format, act_sd_state,
+ V4L2_SUBDEV_FORMAT_ACTIVE);
+ if (ret == 0) {
+ vformat.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ ret = v4l2_subdev_call(input->camera, pad, set_fmt, act_sd_state, &vformat);
+ }
+
+ if (act_sd_state)
+ v4l2_subdev_unlock_state(act_sd_state);
- vformat.which = V4L2_SUBDEV_FORMAT_ACTIVE;
- ret = v4l2_subdev_call(input->camera, pad, set_fmt, NULL, &vformat);
if (ret)
return ret;
@@ -132,8 +132,8 @@ struct atomisp_input_subdev {
/* Sensor rects for sensors which support crop */
struct v4l2_rect native_rect;
struct v4l2_rect active_rect;
- /* Sensor pad_cfg for which == V4L2_SUBDEV_FORMAT_TRY calls */
- struct v4l2_subdev_pad_config pad_cfg;
+ /* Sensor state for which == V4L2_SUBDEV_FORMAT_TRY calls */
+ struct v4l2_subdev_state *try_sd_state;
struct v4l2_subdev *motor;
@@ -781,12 +781,20 @@ static int atomisp_enum_framesizes(struct file *file, void *priv,
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
.code = input->code,
};
+ struct v4l2_subdev_state *act_sd_state;
int ret;
+ if (!input->camera)
+ return -EINVAL;
+
if (input->crop_support)
return atomisp_enum_framesizes_crop(isp, fsize);
- ret = v4l2_subdev_call(input->camera, pad, enum_frame_size, NULL, &fse);
+ act_sd_state = v4l2_subdev_lock_and_get_active_state(input->camera);
+ ret = v4l2_subdev_call(input->camera, pad, enum_frame_size,
+ act_sd_state, &fse);
+ if (act_sd_state)
+ v4l2_subdev_unlock_state(act_sd_state);
if (ret)
return ret;
@@ -803,18 +811,25 @@ static int atomisp_enum_frameintervals(struct file *file, void *priv,
struct video_device *vdev = video_devdata(file);
struct atomisp_device *isp = video_get_drvdata(vdev);
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
+ struct atomisp_input_subdev *input = &isp->inputs[asd->input_curr];
struct v4l2_subdev_frame_interval_enum fie = {
- .code = atomisp_in_fmt_conv[0].code,
+ .code = atomisp_in_fmt_conv[0].code,
.index = fival->index,
.width = fival->width,
.height = fival->height,
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
};
+ struct v4l2_subdev_state *act_sd_state;
int ret;
- ret = v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
- pad, enum_frame_interval, NULL,
- &fie);
+ if (!input->camera)
+ return -EINVAL;
+
+ act_sd_state = v4l2_subdev_lock_and_get_active_state(input->camera);
+ ret = v4l2_subdev_call(input->camera, pad, enum_frame_interval,
+ act_sd_state, &fie);
+ if (act_sd_state)
+ v4l2_subdev_unlock_state(act_sd_state);
if (ret)
return ret;
@@ -830,30 +845,25 @@ static int atomisp_enum_fmt_cap(struct file *file, void *fh,
struct video_device *vdev = video_devdata(file);
struct atomisp_device *isp = video_get_drvdata(vdev);
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
+ struct atomisp_input_subdev *input = &isp->inputs[asd->input_curr];
struct v4l2_subdev_mbus_code_enum code = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
};
const struct atomisp_format_bridge *format;
- struct v4l2_subdev *camera;
+ struct v4l2_subdev_state *act_sd_state;
unsigned int i, fi = 0;
- int rval;
+ int ret;
- camera = isp->inputs[asd->input_curr].camera;
- if(!camera) {
- dev_err(isp->dev, "%s(): camera is NULL, device is %s\n",
- __func__, vdev->name);
+ if (!input->camera)
return -EINVAL;
- }
- rval = v4l2_subdev_call(camera, pad, enum_mbus_code, NULL, &code);
- if (rval == -ENOIOCTLCMD) {
- dev_warn(isp->dev,
- "enum_mbus_code pad op not supported by %s. Please fix your sensor driver!\n",
- camera->name);
- }
-
- if (rval)
- return rval;
+ act_sd_state = v4l2_subdev_lock_and_get_active_state(input->camera);
+ ret = v4l2_subdev_call(input->camera, pad, enum_mbus_code,
+ act_sd_state, &code);
+ if (act_sd_state)
+ v4l2_subdev_unlock_state(act_sd_state);
+ if (ret)
+ return ret;
for (i = 0; i < ARRAY_SIZE(atomisp_output_fmts); i++) {
format = &atomisp_output_fmts[i];
@@ -862,6 +862,9 @@ static void atomisp_unregister_entities(struct atomisp_device *isp)
v4l2_device_unregister(&isp->v4l2_dev);
media_device_unregister(&isp->media_dev);
media_device_cleanup(&isp->media_dev);
+
+ for (i = 0; i < isp->input_cnt; i++)
+ __v4l2_subdev_state_free(isp->inputs[i].try_sd_state);
}
static int atomisp_register_entities(struct atomisp_device *isp)
@@ -933,32 +936,49 @@ static int atomisp_register_entities(struct atomisp_device *isp)
static void atomisp_init_sensor(struct atomisp_input_subdev *input)
{
+ static struct lock_class_key try_sd_state_key;
struct v4l2_subdev_mbus_code_enum mbus_code_enum = { };
struct v4l2_subdev_frame_size_enum fse = { };
- struct v4l2_subdev_state sd_state = {
- .pads = &input->pad_cfg,
- };
struct v4l2_subdev_selection sel = { };
+ struct v4l2_subdev_state *try_sd_state, *act_sd_state;
int i, err;
+ /*
+ * FIXME: Drivers are not supposed to use __v4l2_subdev_state_alloc()
+ * but atomisp needs this for try_fmt on its /dev/video# node since
+ * it emulates a normal v4l2 device there, passing through try_fmt /
+ * set_fmt to the sensor.
+ */
+ try_sd_state = __v4l2_subdev_state_alloc(input->camera,
+ "atomisp:try_sd_state->lock", &try_sd_state_key);
+ if (IS_ERR(try_sd_state))
+ return;
+
+ input->try_sd_state = try_sd_state;
+
+ act_sd_state = v4l2_subdev_lock_and_get_active_state(input->camera);
+
mbus_code_enum.which = V4L2_SUBDEV_FORMAT_ACTIVE;
- err = v4l2_subdev_call(input->camera, pad, enum_mbus_code, NULL, &mbus_code_enum);
+ err = v4l2_subdev_call(input->camera, pad, enum_mbus_code,
+ act_sd_state, &mbus_code_enum);
if (!err)
input->code = mbus_code_enum.code;
sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
sel.target = V4L2_SEL_TGT_NATIVE_SIZE;
- err = v4l2_subdev_call(input->camera, pad, get_selection, NULL, &sel);
+ err = v4l2_subdev_call(input->camera, pad, get_selection,
+ act_sd_state, &sel);
if (err)
- return;
+ goto unlock_act_sd_state;
input->native_rect = sel.r;
sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
sel.target = V4L2_SEL_TGT_CROP_DEFAULT;
- err = v4l2_subdev_call(input->camera, pad, get_selection, NULL, &sel);
+ err = v4l2_subdev_call(input->camera, pad, get_selection,
+ act_sd_state, &sel);
if (err)
- return;
+ goto unlock_act_sd_state;
input->active_rect = sel.r;
@@ -973,7 +993,8 @@ static void atomisp_init_sensor(struct atomisp_input_subdev *input)
fse.code = input->code;
fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
- err = v4l2_subdev_call(input->camera, pad, enum_frame_size, NULL, &fse);
+ err = v4l2_subdev_call(input->camera, pad, enum_frame_size,
+ act_sd_state, &fse);
if (err)
break;
@@ -989,22 +1010,26 @@ static void atomisp_init_sensor(struct atomisp_input_subdev *input)
* for padding, set the crop rect to cover the entire sensor instead
* of only the default active area.
*
- * Do this for both try and active formats since the try_crop rect in
- * pad_cfg may influence (clamp) future try_fmt calls with which == try.
+ * Do this for both try and active formats since the crop rect in
+ * try_sd_state may influence (clamp size) in calls with which == try.
*/
sel.which = V4L2_SUBDEV_FORMAT_TRY;
sel.target = V4L2_SEL_TGT_CROP;
sel.r = input->native_rect;
- err = v4l2_subdev_call(input->camera, pad, set_selection, &sd_state, &sel);
+ v4l2_subdev_lock_state(input->try_sd_state);
+ err = v4l2_subdev_call(input->camera, pad, set_selection,
+ input->try_sd_state, &sel);
+ v4l2_subdev_unlock_state(input->try_sd_state);
if (err)
- return;
+ goto unlock_act_sd_state;
sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
sel.target = V4L2_SEL_TGT_CROP;
sel.r = input->native_rect;
- err = v4l2_subdev_call(input->camera, pad, set_selection, NULL, &sel);
+ err = v4l2_subdev_call(input->camera, pad, set_selection,
+ act_sd_state, &sel);
if (err)
- return;
+ goto unlock_act_sd_state;
dev_info(input->camera->dev, "Supports crop native %dx%d active %dx%d binning %d\n",
input->native_rect.width, input->native_rect.height,
@@ -1012,6 +1037,10 @@ static void atomisp_init_sensor(struct atomisp_input_subdev *input)
input->binning_support);
input->crop_support = true;
+
+unlock_act_sd_state:
+ if (act_sd_state)
+ v4l2_subdev_unlock_state(act_sd_state);
}
int atomisp_register_device_nodes(struct atomisp_device *isp)
The atomisp driver emulates a standard v4l2 device, which also works for non media-controller aware applications. Part of this requires making try_fmt calls on the sensor when a normal v4l2 app is making try_fmt calls on the /dev/video# mode. With the recent v4l2_subdev_state handling changes in 6.8 this no longer works, fixing this requires 2 changes: 1. The atomisp code was using its own internal v4l2_subdev_pad_config for this. Replace the internal v4l2_subdev_pad_config with allocating a full v4l2_subdev_state for storing the full try_fmt state. 2. The paths actually setting the fmt or crop selection now need to be passed the v4l2_subdev's active state, so that sensor drivers which are using the v4l2_subdev's active state to store their state keep working. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../staging/media/atomisp/pci/atomisp_cmd.c | 58 ++++++++++-------- .../media/atomisp/pci/atomisp_internal.h | 4 +- .../staging/media/atomisp/pci/atomisp_ioctl.c | 52 +++++++++------- .../staging/media/atomisp/pci/atomisp_v4l2.c | 59 ++++++++++++++----- 4 files changed, 111 insertions(+), 62 deletions(-)