| Message ID | 20240111043302.15641-1-rdunlap@infradead.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: i2c: ar0521: fix spellos | expand |
Hi Randy, Good catches, thanks for your work. Randy Dunlap <rdunlap@infradead.org> writes: > Fix spelling mistakes as reported by codespell. Acked-by: Krzysztof Hałasa <khalasa@piap.pl> > --- a/drivers/media/i2c/ar0521.c > +++ b/drivers/media/i2c/ar0521.c > @@ -314,7 +314,7 @@ static void ar0521_calc_pll(struct ar052 > * In the clock tree: > * MIPI_CLK = PIXEL_CLOCK * bpp / 2 / 2 > * > - * Generic pixel_rate to bus clock frequencey equation: > + * Generic pixel_rate to bus clock frequency equation: > * MIPI_CLK = V4L2_CID_PIXEL_RATE * bpp / lanes / 2 > * > * From which we derive the PIXEL_CLOCK to use in the clock tree: > @@ -327,7 +327,7 @@ static void ar0521_calc_pll(struct ar052 > * > * TODO: in case we have less data lanes we have to reduce the desired > * VCO not to exceed the limits specified by the datasheet and > - * consequentially reduce the obtained pixel clock. > + * consequently reduce the obtained pixel clock. > */ > pixel_clock = AR0521_PIXEL_CLOCK_RATE * 2 / sensor->lane_count; > bpp = ar0521_code_to_bpp(sensor); > @@ -806,7 +806,7 @@ static const struct initial_reg { > REGS(be(0x3F00), > be(0x0017), /* 3F00: BM_T0 */ > be(0x02DD), /* 3F02: BM_T1 */ > - /* 3F04: if Ana_gain less than 2, use noise_floor0, multipl */ > + /* 3F04: if Ana_gain less than 2, use noise_floor0, multiply */ > be(0x0020), > /* 3F06: if Ana_gain between 4 and 7, use noise_floor2 and */ > be(0x0040), > >
diff -- a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c --- a/drivers/media/i2c/ar0521.c +++ b/drivers/media/i2c/ar0521.c @@ -314,7 +314,7 @@ static void ar0521_calc_pll(struct ar052 * In the clock tree: * MIPI_CLK = PIXEL_CLOCK * bpp / 2 / 2 * - * Generic pixel_rate to bus clock frequencey equation: + * Generic pixel_rate to bus clock frequency equation: * MIPI_CLK = V4L2_CID_PIXEL_RATE * bpp / lanes / 2 * * From which we derive the PIXEL_CLOCK to use in the clock tree: @@ -327,7 +327,7 @@ static void ar0521_calc_pll(struct ar052 * * TODO: in case we have less data lanes we have to reduce the desired * VCO not to exceed the limits specified by the datasheet and - * consequentially reduce the obtained pixel clock. + * consequently reduce the obtained pixel clock. */ pixel_clock = AR0521_PIXEL_CLOCK_RATE * 2 / sensor->lane_count; bpp = ar0521_code_to_bpp(sensor); @@ -806,7 +806,7 @@ static const struct initial_reg { REGS(be(0x3F00), be(0x0017), /* 3F00: BM_T0 */ be(0x02DD), /* 3F02: BM_T1 */ - /* 3F04: if Ana_gain less than 2, use noise_floor0, multipl */ + /* 3F04: if Ana_gain less than 2, use noise_floor0, multiply */ be(0x0020), /* 3F06: if Ana_gain between 4 and 7, use noise_floor2 and */ be(0x0040),
Fix spelling mistakes as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Krzysztof Hałasa <khalasa@piap.pl> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-media@vger.kernel.org --- drivers/media/i2c/ar0521.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)