| Message ID | 20240119063224.29671-2-jason-jh.lin@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add mediatek,gce-props.yaml for other bindings reference | expand |
Il 19/01/24 07:32, Jason-JH.Lin ha scritto: > Add mediatek,gce-props.yaml for common GCE properties that is used for > both mailbox providers and consumers. We place the common property > "mediatek,gce-events" in this binding currently. > > The property "mediatek,gce-events" is used for GCE event ID corresponding > to a hardware event signal sent by the hardware or a sofware driver. > If the mailbox providers or consumers want to manipulate the value of > the event ID, they need to know the specific event ID. > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> > --- > .../bindings/mailbox/mediatek,gce-props.yaml | 52 +++++++++++++++++++ > 1 file changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > > diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > new file mode 100644 > index 000000000000..68b519ff089f > --- /dev/null > +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > @@ -0,0 +1,52 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek Global Command Engine Common Propertes > + > +maintainers: > + - Houlong Wei <houlong.wei@mediatek.com> > + > +description: > + The Global Command Engine (GCE) is an instruction based, multi-threaded, > + single-core command dispatcher for MediaTek hardware. The Command Queue > + (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux > + mailbox framework. It is used to receive messages from mailbox consumers > + and configure GCE to execute the specified instruction set in the message. > + We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox > + driver. A device driver that uses the CMDQ driver to configure its hardware > + registers is a mailbox consumer. The mailbox consumer can request a mailbox > + channel corresponding to a GCE hardware thread to send a message, specifying > + that the GCE thread to configure its hardware. The mailbox provider can also > + reserved a mailbox channel to configure GCE hardware register by the spcific > + GCE thread. This binding defines the common GCE properties for both mailbox > + provider and consumers. > + > +properties: > + mediatek,gce-events: > + description: > + GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023). > + Each event ID has a boolean event value with the default value 0. > + The property mediatek,gce-events is used to obtain the event IDs. > + Some gce-events are hardware-bound and cannot be changed by software. > + For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will > + send an event signal to GCE, setting the value of event ID 597 to 1. > + Similarly, in MT8188, the value of event ID 574 will be set to 1 when > + VOD0_MUTEX is stream done. > + On the other hand, some gce-events are not hardware-bound and can be > + changed by software. For example, in MT8188, we can set the value of > + event ID 855, which is not bound to any hardware, to 1 when the driver > + in the secure world completes a task. However, in MT8195, event ID 855 > + is already bound to VDEC_LAT1, so we need to select another event ID to > + achieve the same purpose. This event ID can be any ID that is not bound > + to any hardware and is not yet used in any software driver. > + To determine if the event ID is bound to the hardware or used by a > + software driver, refer to the GCE header > + include/dt-bindings/gce/<chip>-gce.h of each chip. > + $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 1024 maxItems: 1024 seems to be a bit too many... this means that one devicetree node may have up to 1024 gce events, which is impossible! If a driver needed all of the 1024 events, this means that it's not an user of the GCE, but the GCE itself! Imagine seeing a devicetree node with 1024 array entries for mediatek,gce-events... I'd set that to a more sensible value of 32 - eventually we can extend it later, if ever needed. Besides, nice job about all this documentation of the GCE and its events: love it! Cheers, Angelo
Rob, On Fri, Jan 19, 2024 at 02:32:22PM +0800, Jason-JH.Lin wrote: > Add mediatek,gce-props.yaml for common GCE properties that is used for > both mailbox providers and consumers. We place the common property > "mediatek,gce-events" in this binding currently. > > The property "mediatek,gce-events" is used for GCE event ID corresponding > to a hardware event signal sent by the hardware or a sofware driver. > If the mailbox providers or consumers want to manipulate the value of > the event ID, they need to know the specific event ID. > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> > --- > .../bindings/mailbox/mediatek,gce-props.yaml | 52 +++++++++++++++++++ Is bindings/mailbox the correct directory to put this in? > 1 file changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > > diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > new file mode 100644 > index 000000000000..68b519ff089f > --- /dev/null > +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > @@ -0,0 +1,52 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek Global Command Engine Common Propertes > + > +maintainers: > + - Houlong Wei <houlong.wei@mediatek.com> > + > +description: > + The Global Command Engine (GCE) is an instruction based, multi-threaded, > + single-core command dispatcher for MediaTek hardware. The Command Queue > + (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux > + mailbox framework. It is used to receive messages from mailbox consumers > + and configure GCE to execute the specified instruction set in the message. > + We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox > + driver. A device driver that uses the CMDQ driver to configure its hardware > + registers is a mailbox consumer. The mailbox consumer can request a mailbox > + channel corresponding to a GCE hardware thread to send a message, specifying > + that the GCE thread to configure its hardware. The mailbox provider can also > + reserved a mailbox channel to configure GCE hardware register by the spcific > + GCE thread. This binding defines the common GCE properties for both mailbox > + provider and consumers. > + > +properties: > + mediatek,gce-events: > + description: > + GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023). > + Each event ID has a boolean event value with the default value 0. > + The property mediatek,gce-events is used to obtain the event IDs. > + Some gce-events are hardware-bound and cannot be changed by software. > + For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will > + send an event signal to GCE, setting the value of event ID 597 to 1. > + Similarly, in MT8188, the value of event ID 574 will be set to 1 when > + VOD0_MUTEX is stream done. > + On the other hand, some gce-events are not hardware-bound and can be > + changed by software. For example, in MT8188, we can set the value of > + event ID 855, which is not bound to any hardware, to 1 when the driver > + in the secure world completes a task. However, in MT8195, event ID 855 > + is already bound to VDEC_LAT1, so we need to select another event ID to > + achieve the same purpose. This event ID can be any ID that is not bound > + to any hardware and is not yet used in any software driver. > + To determine if the event ID is bound to the hardware or used by a > + software driver, refer to the GCE header > + include/dt-bindings/gce/<chip>-gce.h of each chip. > + $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 1024 > + > +additionalProperties: true > -- > 2.18.0 >
Hi Angelo, Thanks for the reviews. On Fri, 2024-01-19 at 11:53 +0100, AngeloGioacchino Del Regno wrote: > Il 19/01/24 07:32, Jason-JH.Lin ha scritto: > > Add mediatek,gce-props.yaml for common GCE properties that is used > > for > > both mailbox providers and consumers. We place the common property > > "mediatek,gce-events" in this binding currently. > > > > The property "mediatek,gce-events" is used for GCE event ID > > corresponding > > to a hardware event signal sent by the hardware or a sofware > > driver. > > If the mailbox providers or consumers want to manipulate the value > > of > > the event ID, they need to know the specific event ID. > > > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> > > --- > > .../bindings/mailbox/mediatek,gce-props.yaml | 52 > > +++++++++++++++++++ > > 1 file changed, 52 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > > b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > > new file mode 100644 > > index 000000000000..68b519ff089f > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce- > > props.yaml > > @@ -0,0 +1,52 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: > > https://urldefense.com/v3/__http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml*__;Iw!!CTRNKA9wMg0ARbw!kMCkhwQ_az8HouSQgqMuDC5QpKFizQrWMlwaWPfYp1GphlueXVfPfS9FA83806_7K_qqcfHOaprqAWNOoBkzsTJNUSZpugRS_Q$ > > > > +$schema: > > https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!kMCkhwQ_az8HouSQgqMuDC5QpKFizQrWMlwaWPfYp1GphlueXVfPfS9FA83806_7K_qqcfHOaprqAWNOoBkzsTJNUSYsot_sog$ > > > > + > > +title: MediaTek Global Command Engine Common Propertes > > + > > +maintainers: > > + - Houlong Wei <houlong.wei@mediatek.com> > > + > > +description: > > + The Global Command Engine (GCE) is an instruction based, multi- > > threaded, > > + single-core command dispatcher for MediaTek hardware. The > > Command Queue > > + (CMDQ) mailbox driver is a driver for GCE, implemented using the > > Linux > > + mailbox framework. It is used to receive messages from mailbox > > consumers > > + and configure GCE to execute the specified instruction set in > > the message. > > + We use mediatek,gce-mailbox.yaml to define the properties for > > CMDQ mailbox > > + driver. A device driver that uses the CMDQ driver to configure > > its hardware > > + registers is a mailbox consumer. The mailbox consumer can > > request a mailbox > > + channel corresponding to a GCE hardware thread to send a > > message, specifying > > + that the GCE thread to configure its hardware. The mailbox > > provider can also > > + reserved a mailbox channel to configure GCE hardware register by > > the spcific > > + GCE thread. This binding defines the common GCE properties for > > both mailbox > > + provider and consumers. > > + > > +properties: > > + mediatek,gce-events: > > + description: > > + GCE has an event table in SRAM, consisting of 1024 event IDs > > (0~1023). > > + Each event ID has a boolean event value with the default > > value 0. > > + The property mediatek,gce-events is used to obtain the event > > IDs. > > + Some gce-events are hardware-bound and cannot be changed by > > software. > > + For instance, in MT8195, when VDO0_MUTEX is stream done, > > VDO_MUTEX will > > + send an event signal to GCE, setting the value of event ID > > 597 to 1. > > + Similarly, in MT8188, the value of event ID 574 will be set > > to 1 when > > + VOD0_MUTEX is stream done. > > + On the other hand, some gce-events are not hardware-bound > > and can be > > + changed by software. For example, in MT8188, we can set the > > value of > > + event ID 855, which is not bound to any hardware, to 1 when > > the driver > > + in the secure world completes a task. However, in MT8195, > > event ID 855 > > + is already bound to VDEC_LAT1, so we need to select another > > event ID to > > + achieve the same purpose. This event ID can be any ID that > > is not bound > > + to any hardware and is not yet used in any software driver. > > + To determine if the event ID is bound to the hardware or > > used by a > > + software driver, refer to the GCE header > > + include/dt-bindings/gce/<chip>-gce.h of each chip. > > + $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 1024 > > maxItems: 1024 seems to be a bit too many... this means that one > devicetree node > may have up to 1024 gce events, which is impossible! If a driver > needed all of > the 1024 events, this means that it's not an user of the GCE, but the > GCE itself! > > Imagine seeing a devicetree node with 1024 array entries for > mediatek,gce-events... > Yes, that's impossible to set up to 1024 array entries. I just have used the maximum value to cover all the possible cases. > I'd set that to a more sensible value of 32 - eventually we can > extend it later, > if ever needed. > OK, I agree with that! I'll change the maxItems to 32. > Besides, nice job about all this documentation of the GCE and its > events: love it! > I'm appreciate you love it :) Regards, Jason-JH.Lin > Cheers, > Angelo > >
On Fri, Jan 19, 2024 at 2:32 PM Jason-JH.Lin <jason-jh.lin@mediatek.com> wrote: Hi Jason, Just few nitpicks about typo: > > Add mediatek,gce-props.yaml for common GCE properties that is used for > both mailbox providers and consumers. We place the common property > "mediatek,gce-events" in this binding currently. > > The property "mediatek,gce-events" is used for GCE event ID corresponding > to a hardware event signal sent by the hardware or a sofware driver. software > If the mailbox providers or consumers want to manipulate the value of > the event ID, they need to know the specific event ID. > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> > --- > .../bindings/mailbox/mediatek,gce-props.yaml | 52 +++++++++++++++++++ > 1 file changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > > diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > new file mode 100644 > index 000000000000..68b519ff089f > --- /dev/null > +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > @@ -0,0 +1,52 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek Global Command Engine Common Propertes Properties > + > +maintainers: > + - Houlong Wei <houlong.wei@mediatek.com> > + > +description: > + The Global Command Engine (GCE) is an instruction based, multi-threaded, > + single-core command dispatcher for MediaTek hardware. The Command Queue > + (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux > + mailbox framework. It is used to receive messages from mailbox consumers > + and configure GCE to execute the specified instruction set in the message. > + We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox > + driver. A device driver that uses the CMDQ driver to configure its hardware > + registers is a mailbox consumer. The mailbox consumer can request a mailbox > + channel corresponding to a GCE hardware thread to send a message, specifying > + that the GCE thread to configure its hardware. The mailbox provider can also > + reserved a mailbox channel to configure GCE hardware register by the spcific s/reserved/reserve/ s/spcific/specific/ Regards, Fei > + GCE thread. This binding defines the common GCE properties for both mailbox > + provider and consumers. > + > +properties: > + mediatek,gce-events: > + description: > + GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023). > + Each event ID has a boolean event value with the default value 0. > + The property mediatek,gce-events is used to obtain the event IDs. > + Some gce-events are hardware-bound and cannot be changed by software. > + For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will > + send an event signal to GCE, setting the value of event ID 597 to 1. > + Similarly, in MT8188, the value of event ID 574 will be set to 1 when > + VOD0_MUTEX is stream done. > + On the other hand, some gce-events are not hardware-bound and can be > + changed by software. For example, in MT8188, we can set the value of > + event ID 855, which is not bound to any hardware, to 1 when the driver > + in the secure world completes a task. However, in MT8195, event ID 855 > + is already bound to VDEC_LAT1, so we need to select another event ID to > + achieve the same purpose. This event ID can be any ID that is not bound > + to any hardware and is not yet used in any software driver. > + To determine if the event ID is bound to the hardware or used by a > + software driver, refer to the GCE header > + include/dt-bindings/gce/<chip>-gce.h of each chip. > + $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 1024 > + > +additionalProperties: true > -- > 2.18.0 > >
Il 19/01/24 17:44, Conor Dooley ha scritto: > Rob, > > On Fri, Jan 19, 2024 at 02:32:22PM +0800, Jason-JH.Lin wrote: >> Add mediatek,gce-props.yaml for common GCE properties that is used for >> both mailbox providers and consumers. We place the common property >> "mediatek,gce-events" in this binding currently. >> >> The property "mediatek,gce-events" is used for GCE event ID corresponding >> to a hardware event signal sent by the hardware or a sofware driver. >> If the mailbox providers or consumers want to manipulate the value of >> the event ID, they need to know the specific event ID. >> >> Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> >> --- >> .../bindings/mailbox/mediatek,gce-props.yaml | 52 +++++++++++++++++++ > > Is bindings/mailbox the correct directory to put this in? > Well, the GCE is a mailbox :-) ...but I get why you're asking... and I don't think that this should go to arm/mediatek/ as it's really just only referring to extra properties for kind of "special" mailbox client events... Cheers, Angelo >> 1 file changed, 52 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml >> >> diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml >> new file mode 100644 >> index 000000000000..68b519ff089f >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml >> @@ -0,0 +1,52 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: MediaTek Global Command Engine Common Propertes >> + >> +maintainers: >> + - Houlong Wei <houlong.wei@mediatek.com> >> + >> +description: >> + The Global Command Engine (GCE) is an instruction based, multi-threaded, >> + single-core command dispatcher for MediaTek hardware. The Command Queue >> + (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux >> + mailbox framework. It is used to receive messages from mailbox consumers >> + and configure GCE to execute the specified instruction set in the message. >> + We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox >> + driver. A device driver that uses the CMDQ driver to configure its hardware >> + registers is a mailbox consumer. The mailbox consumer can request a mailbox >> + channel corresponding to a GCE hardware thread to send a message, specifying >> + that the GCE thread to configure its hardware. The mailbox provider can also >> + reserved a mailbox channel to configure GCE hardware register by the spcific >> + GCE thread. This binding defines the common GCE properties for both mailbox >> + provider and consumers. >> + >> +properties: >> + mediatek,gce-events: >> + description: >> + GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023). >> + Each event ID has a boolean event value with the default value 0. >> + The property mediatek,gce-events is used to obtain the event IDs. >> + Some gce-events are hardware-bound and cannot be changed by software. >> + For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will >> + send an event signal to GCE, setting the value of event ID 597 to 1. >> + Similarly, in MT8188, the value of event ID 574 will be set to 1 when >> + VOD0_MUTEX is stream done. >> + On the other hand, some gce-events are not hardware-bound and can be >> + changed by software. For example, in MT8188, we can set the value of >> + event ID 855, which is not bound to any hardware, to 1 when the driver >> + in the secure world completes a task. However, in MT8195, event ID 855 >> + is already bound to VDEC_LAT1, so we need to select another event ID to >> + achieve the same purpose. This event ID can be any ID that is not bound >> + to any hardware and is not yet used in any software driver. >> + To determine if the event ID is bound to the hardware or used by a >> + software driver, refer to the GCE header >> + include/dt-bindings/gce/<chip>-gce.h of each chip. >> + $ref: /schemas/types.yaml#/definitions/uint32-array >> + minItems: 1 >> + maxItems: 1024 >> + >> +additionalProperties: true >> -- >> 2.18.0 >>
Hi Fei, Thanks for the corrections. On Mon, 2024-01-22 at 11:44 +0800, Fei Shao wrote: > > External email : Please do not click links or open attachments until > you have verified the sender or the content. > On Fri, Jan 19, 2024 at 2:32 PM Jason-JH.Lin < > jason-jh.lin@mediatek.com> wrote: > Hi Jason, > > Just few nitpicks about typo: > > > > Add mediatek,gce-props.yaml for common GCE properties that is used > for > > both mailbox providers and consumers. We place the common property > > "mediatek,gce-events" in this binding currently. > > > > The property "mediatek,gce-events" is used for GCE event ID > corresponding > > to a hardware event signal sent by the hardware or a sofware > driver. > software > > > If the mailbox providers or consumers want to manipulate the value > of > > the event ID, they need to know the specific event ID. > > > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> > > --- > > .../bindings/mailbox/mediatek,gce-props.yaml | 52 > +++++++++++++++++++ > > 1 file changed, 52 insertions(+) > > create mode 100644 > Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > > > > diff --git > a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml > > new file mode 100644 > > index 000000000000..68b519ff089f > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce- > props.yaml > > @@ -0,0 +1,52 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: > http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: MediaTek Global Command Engine Common Propertes > Properties > > > + > > +maintainers: > > + - Houlong Wei <houlong.wei@mediatek.com> > > + > > +description: > > + The Global Command Engine (GCE) is an instruction based, multi- > threaded, > > + single-core command dispatcher for MediaTek hardware. The > Command Queue > > + (CMDQ) mailbox driver is a driver for GCE, implemented using the > Linux > > + mailbox framework. It is used to receive messages from mailbox > consumers > > + and configure GCE to execute the specified instruction set in > the message. > > + We use mediatek,gce-mailbox.yaml to define the properties for > CMDQ mailbox > > + driver. A device driver that uses the CMDQ driver to configure > its hardware > > + registers is a mailbox consumer. The mailbox consumer can > request a mailbox > > + channel corresponding to a GCE hardware thread to send a > message, specifying > > + that the GCE thread to configure its hardware. The mailbox > provider can also > > + reserved a mailbox channel to configure GCE hardware register by > the spcific > s/reserved/reserve/ > s/spcific/specific/ > > Regards, > Fei > I'll fix these typo in the next version. Regards, Jason-JH.Lin
On Mon, Jan 22, 2024 at 11:38:15AM +0100, AngeloGioacchino Del Regno wrote: > Il 19/01/24 17:44, Conor Dooley ha scritto: > > Rob, > > > > On Fri, Jan 19, 2024 at 02:32:22PM +0800, Jason-JH.Lin wrote: > > > Add mediatek,gce-props.yaml for common GCE properties that is used for > > > both mailbox providers and consumers. We place the common property > > > "mediatek,gce-events" in this binding currently. > > > > > > The property "mediatek,gce-events" is used for GCE event ID corresponding > > > to a hardware event signal sent by the hardware or a sofware driver. > > > If the mailbox providers or consumers want to manipulate the value of > > > the event ID, they need to know the specific event ID. > > > > > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> > > > --- > > > .../bindings/mailbox/mediatek,gce-props.yaml | 52 +++++++++++++++++++ > > > > Is bindings/mailbox the correct directory to put this in? > > > > Well, the GCE is a mailbox :-) > > ...but I get why you're asking... and I don't think that this should go to > arm/mediatek/ as it's really just only referring to extra properties for kind of > "special" mailbox client events... gce is a mailbox, but this isn't a binding for the mailbox itself, hence me wondering. I haven't been able to think of something better though, so Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Cheers, Conor.
diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml new file mode 100644 index 000000000000..68b519ff089f --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Global Command Engine Common Propertes + +maintainers: + - Houlong Wei <houlong.wei@mediatek.com> + +description: + The Global Command Engine (GCE) is an instruction based, multi-threaded, + single-core command dispatcher for MediaTek hardware. The Command Queue + (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux + mailbox framework. It is used to receive messages from mailbox consumers + and configure GCE to execute the specified instruction set in the message. + We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox + driver. A device driver that uses the CMDQ driver to configure its hardware + registers is a mailbox consumer. The mailbox consumer can request a mailbox + channel corresponding to a GCE hardware thread to send a message, specifying + that the GCE thread to configure its hardware. The mailbox provider can also + reserved a mailbox channel to configure GCE hardware register by the spcific + GCE thread. This binding defines the common GCE properties for both mailbox + provider and consumers. + +properties: + mediatek,gce-events: + description: + GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023). + Each event ID has a boolean event value with the default value 0. + The property mediatek,gce-events is used to obtain the event IDs. + Some gce-events are hardware-bound and cannot be changed by software. + For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will + send an event signal to GCE, setting the value of event ID 597 to 1. + Similarly, in MT8188, the value of event ID 574 will be set to 1 when + VOD0_MUTEX is stream done. + On the other hand, some gce-events are not hardware-bound and can be + changed by software. For example, in MT8188, we can set the value of + event ID 855, which is not bound to any hardware, to 1 when the driver + in the secure world completes a task. However, in MT8195, event ID 855 + is already bound to VDEC_LAT1, so we need to select another event ID to + achieve the same purpose. This event ID can be any ID that is not bound + to any hardware and is not yet used in any software driver. + To determine if the event ID is bound to the hardware or used by a + software driver, refer to the GCE header + include/dt-bindings/gce/<chip>-gce.h of each chip. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 1024 + +additionalProperties: true
Add mediatek,gce-props.yaml for common GCE properties that is used for both mailbox providers and consumers. We place the common property "mediatek,gce-events" in this binding currently. The property "mediatek,gce-events" is used for GCE event ID corresponding to a hardware event signal sent by the hardware or a sofware driver. If the mailbox providers or consumers want to manipulate the value of the event ID, they need to know the specific event ID. Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> --- .../bindings/mailbox/mediatek,gce-props.yaml | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml