@@ -262,7 +262,7 @@ static int vidioc_try_fmt(struct mtk_vcodec_dec_ctx *ctx, struct v4l2_format *f,
int tmp_w, tmp_h;
/*
- * Find next closer width align 64, heign align 64, size align
+ * Find next closer width align 64, height align 64, size align
* 64 rectangle
* Note: This only get default value, the real HW needed value
* only available when ctx in MTK_STATE_HEADER state
@@ -67,11 +67,11 @@ enum mtk_vdec_hw_arch {
* @pic_w: picture width
* @pic_h: picture height
* @buf_w: picture buffer width (64 aligned up from pic_w)
- * @buf_h: picture buffer heiht (64 aligned up from pic_h)
+ * @buf_h: picture buffer height (64 aligned up from pic_h)
* @fb_sz: bitstream size of each plane
* E.g. suppose picture size is 176x144,
* buffer size will be aligned to 176x160.
- * @cap_fourcc: fourcc number(may changed when resolution change)
+ * @cap_fourcc: fourcc number(may change on a resolution change)
* @reserved: align struct to 64-bit in order to adjust 32-bit and 64-bit os.
*/
struct vdec_pic_info {
@@ -326,7 +326,7 @@ struct vdec_av1_slice_quantization {
* @use_lr: whether to use loop restoration
* @use_chroma_lr: whether to use chroma loop restoration
* @frame_restoration_type: specifies the type of restoration used for each plane
- * @loop_restoration_size: pecifies the size of loop restoration units in units
+ * @loop_restoration_size: specifies the size of loop restoration units in units
* of samples in the current plane
*/
struct vdec_av1_slice_lr {
@@ -347,7 +347,7 @@ struct vdec_av1_slice_lr {
* and loop_filter_sharpness together determine when
* a block edge is filtered, and by how much the
* filtering can change the sample values
- * @loop_filter_delta_enabled: filetr level depends on the mode and reference
+ * @loop_filter_delta_enabled: filter level depends on the mode and reference
* frame used to predict a block
*/
struct vdec_av1_slice_loop_filter {
@@ -392,7 +392,7 @@ struct vdec_av1_slice_mfmv {
/**
* struct vdec_av1_slice_tile - AV1 Tile info
* @tile_cols: specifies the number of tiles across the frame
- * @tile_rows: pecifies the number of tiles down the frame
+ * @tile_rows: specifies the number of tiles down the frame
* @mi_col_starts: an array specifying the start column
* @mi_row_starts: an array specifying the start row
* @context_update_tile_id: specifies which tile to use for the CDF update
@@ -423,15 +423,15 @@ struct vdec_av1_slice_tile {
* or the tile sizes are coded
* @interpolation_filter: specifies the filter selection used for performing inter prediction
* @allow_warped_motion: motion_mode may be present or not
- * @is_motion_mode_switchable : euqlt to 0 specifies that only the SIMPLE motion mode will be used
+ * @is_motion_mode_switchable : equal to 0 specifies that only the SIMPLE motion mode will be used
* @reference_mode : frame reference mode selected
* @allow_high_precision_mv: specifies that motion vectors are specified to
* quarter pel precision or to eighth pel precision
- * @allow_intra_bc: ubducates that intra block copy may be used in this frame
+ * @allow_intra_bc: allows that intra block copy may be used in this frame
* @force_integer_mv: specifies motion vectors will always be integers or
* can contain fractional bits
* @allow_screen_content_tools: intra blocks may use palette encoding
- * @error_resilient_mode: error resislent mode is enable/disable
+ * @error_resilient_mode: error resilient mode is enable/disable
* @frame_type: specifies the AV1 frame type
* @primary_ref_frame: specifies which reference frame contains the CDF values
* and other state that should be loaded at the start of the frame
@@ -440,8 +440,8 @@ struct vdec_av1_slice_tile {
* @disable_cdf_update: specified whether the CDF update in the symbol
* decoding process should be disables
* @skip_mode: av1 skip mode parameters
- * @seg: av1 segmentaon parameters
- * @delta_q_lf: av1 delta loop fileter
+ * @seg: av1 segmentation parameters
+ * @delta_q_lf: av1 delta loop filter
* @quant: av1 Quantization params
* @lr: av1 Loop Restauration parameters
* @superres_denom: the denominator for the upscaling ratio
@@ -450,8 +450,8 @@ struct vdec_av1_slice_tile {
* @mfmv: av1 mfmv parameters
* @tile: av1 Tile info
* @frame_is_intra: intra frame
- * @loss_less_array: loss less array
- * @coded_loss_less: coded lsss less
+ * @loss_less_array: lossless array
+ * @coded_loss_less: coded lossless
* @mi_rows: size of mi unit in rows
* @mi_cols: size of mi unit in cols
*/
@@ -94,7 +94,7 @@ struct vdec_h264_dec_info {
* AP-W/R : AP is writer/reader on this item
* VPU-W/R: VPU is write/reader on this item
* @hdr_buf : Header parsing buffer (AP-W, VPU-R)
- * @pred_buf_dma : HW working predication buffer dma address (AP-W, VPU-R)
+ * @pred_buf_dma : HW working prediction buffer dma address (AP-W, VPU-R)
* @mv_buf_dma : HW working motion vector buffer dma address (AP-W, VPU-R)
* @list_free : free frame buffer ring list (AP-W/R, VPU-W)
* @list_disp : display frame buffer ring list (AP-R, VPU-W)
@@ -117,7 +117,7 @@ struct vdec_h264_vsi {
* struct vdec_h264_inst - h264 decoder instance
* @num_nalu : how many nalus be decoded
* @ctx : point to mtk_vcodec_dec_ctx
- * @pred_buf : HW working predication buffer
+ * @pred_buf : HW working prediction buffer
* @mv_buf : HW working motion vector buffer
* @vpu : VPU instance
* @vsi : VPU shared information
@@ -136,7 +136,7 @@ static unsigned int get_mv_buf_size(unsigned int width, unsigned int height)
return HW_MB_STORE_SZ * (width/MB_UNIT_LEN) * (height/MB_UNIT_LEN);
}
-static int allocate_predication_buf(struct vdec_h264_inst *inst)
+static int allocate_prediction_buf(struct vdec_h264_inst *inst)
{
int err = 0;
@@ -151,7 +151,7 @@ static int allocate_predication_buf(struct vdec_h264_inst *inst)
return 0;
}
-static void free_predication_buf(struct vdec_h264_inst *inst)
+static void free_prediction_buf(struct vdec_h264_inst *inst)
{
struct mtk_vcodec_mem *mem = NULL;
@@ -286,7 +286,7 @@ static int vdec_h264_init(struct mtk_vcodec_dec_ctx *ctx)
}
inst->vsi = (struct vdec_h264_vsi *)inst->vpu.vsi;
- err = allocate_predication_buf(inst);
+ err = allocate_prediction_buf(inst);
if (err)
goto error_deinit;
@@ -308,7 +308,7 @@ static void vdec_h264_deinit(void *h_vdec)
struct vdec_h264_inst *inst = (struct vdec_h264_inst *)h_vdec;
vpu_dec_deinit(&inst->vpu);
- free_predication_buf(inst);
+ free_prediction_buf(inst);
free_mv_buf(inst);
kfree(inst);
@@ -175,7 +175,7 @@ void mtk_vdec_h264_get_ref_list(u8 *ref_list,
int num_valid);
/**
- * mtk_vdec_h264_get_ctrl_ptr - get each CID contrl address.
+ * mtk_vdec_h264_get_ctrl_ptr - get each CID control address.
*
* @ctx: v4l2 ctx
* @id: CID control ID
@@ -246,7 +246,7 @@ mtk_vdec_h264_copy_decode_params(struct slice_api_h264_decode_param *dst_params,
const struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES]);
/**
- * mtk_vdec_h264_update_dpb - updata dpb list.
+ * mtk_vdec_h264_update_dpb - update dpb list.
*
* @dec_param: v4l2 control decode params
* @dpb: dpb entry informaton
@@ -27,7 +27,7 @@ struct mtk_h264_dec_slice_param {
/**
* struct vdec_h264_dec_info - decode information
* @dpb_sz : decoding picture buffer size
- * @resolution_changed : resoltion change happen
+ * @resolution_changed : resolution change happend
* @realloc_mv_buf : flag to notify driver to re-allocate mv buffer
* @cap_num_planes : number planes of capture buffer
* @bs_dma : Input bit-stream buffer dma address
@@ -54,7 +54,7 @@ struct vdec_h264_dec_info {
* by VPU.
* AP-W/R : AP is writer/reader on this item
* VPU-W/R: VPU is write/reader on this item
- * @pred_buf_dma : HW working predication buffer dma address (AP-W, VPU-R)
+ * @pred_buf_dma : HW working prediction buffer dma address (AP-W, VPU-R)
* @mv_buf_dma : HW working motion vector buffer dma address (AP-W, VPU-R)
* @dec : decode information (AP-R, VPU-W)
* @pic : picture information (AP-R, VPU-W)
@@ -74,7 +74,7 @@ struct vdec_h264_vsi {
* struct vdec_h264_slice_inst - h264 decoder instance
* @num_nalu : how many nalus be decoded
* @ctx : point to mtk_vcodec_dec_ctx
- * @pred_buf : HW working predication buffer
+ * @pred_buf : HW working prediction buffer
* @mv_buf : HW working motion vector buffer
* @vpu : VPU instance
* @vsi_ctx : Local VSI data for this decoding context
@@ -154,7 +154,7 @@ static int get_vdec_decode_parameters(struct vdec_h264_slice_inst *inst)
return 0;
}
-static int allocate_predication_buf(struct vdec_h264_slice_inst *inst)
+static int allocate_prediction_buf(struct vdec_h264_slice_inst *inst)
{
int err;
@@ -169,7 +169,7 @@ static int allocate_predication_buf(struct vdec_h264_slice_inst *inst)
return 0;
}
-static void free_predication_buf(struct vdec_h264_slice_inst *inst)
+static void free_prediction_buf(struct vdec_h264_slice_inst *inst)
{
struct mtk_vcodec_mem *mem = &inst->pred_buf;
@@ -292,7 +292,7 @@ static int vdec_h264_slice_init(struct mtk_vcodec_dec_ctx *ctx)
inst->vsi_ctx.dec.resolution_changed = true;
inst->vsi_ctx.dec.realloc_mv_buf = true;
- err = allocate_predication_buf(inst);
+ err = allocate_prediction_buf(inst);
if (err)
goto error_deinit;
@@ -320,7 +320,7 @@ static void vdec_h264_slice_deinit(void *h_vdec)
struct vdec_h264_slice_inst *inst = h_vdec;
vpu_dec_deinit(&inst->vpu);
- free_predication_buf(inst);
+ free_prediction_buf(inst);
free_mv_buf(inst);
kfree(inst);
@@ -51,7 +51,7 @@ struct vdec_h264_slice_lat_dec_param {
* struct vdec_h264_slice_info - decode information
*
* @nal_info: nal info of current picture
- * @timeout: Decode timeout: 1 timeout, 0 no timeount
+ * @timeout: Decode timeout: 1 timeout, 0 no timeout
* @bs_buf_size: bitstream size
* @bs_buf_addr: bitstream buffer dma address
* @y_fb_dma: Y frame buffer dma address
@@ -133,7 +133,7 @@ struct vdec_h264_slice_share_info {
*
* @slice_dec_num: how many picture be decoded
* @ctx: point to mtk_vcodec_dec_ctx
- * @pred_buf: HW working predication buffer
+ * @pred_buf: HW working prediction buffer
* @mv_buf: HW working motion vector buffer
* @vpu: VPU instance
* @vsi: vsi used for lat
@@ -254,7 +254,7 @@ struct vdec_hevc_slice_lat_dec_param {
* struct vdec_hevc_slice_info - decode information
*
* @wdma_end_addr_offset: wdma end address offset
- * @timeout: Decode timeout: 1 timeout, 0 no timeount
+ * @timeout: Decode timeout: 1 timeout, 0 no timeout
* @vdec_fb_va: VDEC frame buffer struct virtual address
* @crc: Used to check whether hardware's status is right
*/
@@ -56,7 +56,7 @@
* @cur_c_fb_dma : current plane C frame buffer dma address
* @bs_dma : bitstream dma address
* @bs_sz : bitstream size
- * @resolution_changed: resolution change flag 1 - changed, 0 - not change
+ * @resolution_changed: resolution change flag 1 - changed, 0 - not changed
* @show_frame : display this frame or not
* @wait_key_frame : wait key frame coming
*/
@@ -109,7 +109,7 @@ struct vdec_vp8_hw_reg_base {
/**
* struct vdec_vp8_vpu_inst - VPU instance for VP8 decode
* @wq_hd : Wait queue to wait VPU message ack
- * @signaled : 1 - Host has received ack message from VPU, 0 - not receive
+ * @signaled : 1 - Host has received ack message from VPU, 0 - not received
* @failure : VPU execution result status 0 - success, others - fail
* @inst_addr : VPU decoder instance address
*/
@@ -35,7 +35,7 @@
* @cur_c_fb_dma: current plane C frame buffer dma address
* @bs_dma: bitstream dma address
* @bs_sz: bitstream size
- * @resolution_changed:resolution change flag 1 - changed, 0 - not change
+ * @resolution_changed:resolution change flag 1 - changed, 0 - not changed
* @frame_header_type: current frame header type
* @crc: used to check whether hardware's status is right
* @reserved: reserved, currently unused
@@ -41,7 +41,7 @@ struct vp9_dram_buf {
/**
* struct vp9_fb_info - contains frame buffer info
- * @fb : frmae buffer
+ * @fb : frame buffer
* @reserved : reserved field used by vpu
*/
struct vp9_fb_info {
@@ -89,7 +89,7 @@ struct vp9_sf_ref_fb {
* AP-W/R : AP is writer/reader on this item
* VPU-W/R: VPU is write/reader on this item
* @sf_bs_buf : super frame backup buffer (AP-W, VPU-R)
- * @sf_ref_fb : record supoer frame reference buffer information
+ * @sf_ref_fb : record super frame reference buffer information
* (AP-R/W, VPU-R/W)
* @sf_next_ref_fb_idx : next available super frame (AP-W, VPU-R)
* @sf_frm_cnt : super frame count, filled by vpu (AP-R, VPU-W)
@@ -158,14 +158,14 @@ int vdec_msg_queue_qbuf(struct vdec_msg_queue_ctx *ctx, struct vdec_lat_buf *buf
struct vdec_lat_buf *vdec_msg_queue_dqbuf(struct vdec_msg_queue_ctx *ctx);
/**
- * vdec_msg_queue_update_ube_rptr - used to updata the ube read point.
+ * vdec_msg_queue_update_ube_rptr - used to update the ube read point.
* @msg_queue: used to store the lat buffer information
* @ube_rptr: current ube read point
*/
void vdec_msg_queue_update_ube_rptr(struct vdec_msg_queue *msg_queue, uint64_t ube_rptr);
/**
- * vdec_msg_queue_update_ube_wptr - used to updata the ube write point.
+ * vdec_msg_queue_update_ube_wptr - used to update the ube write point.
* @msg_queue: used to store the lat buffer information
* @ube_wptr: current ube write point
*/
@@ -81,7 +81,7 @@ int vpu_dec_deinit(struct vdec_vpu_inst *vpu);
/**
* vpu_dec_reset - reset decoder, use for flush decoder when end of stream or
- * seek. Remainig non displayed frame will be pushed to display.
+ * seek. Remaining non displayed frame will be pushed to display.
*
* @vpu: instance for vdec_vpu_inst
*/
@@ -98,7 +98,7 @@ int vpu_dec_core(struct vdec_vpu_inst *vpu);
/**
* vpu_dec_core_end - core end decoding, basically the function will be invoked once
* when core HW decoding done and receive interrupt successfully. The
- * decoder in VPU will updata hardware information and deinit hardware
+ * decoder in VPU will update hardware information and deinit hardware
* and check if there is a new decoded frame available to display.
*
* @vpu : instance for vdec_vpu_inst
@@ -311,7 +311,7 @@ static int vidioc_try_fmt_out(struct mtk_vcodec_enc_ctx *ctx, struct v4l2_format
pix_fmt_mp->height = clamp(pix_fmt_mp->height, MTK_VENC_MIN_H, max_height);
pix_fmt_mp->width = clamp(pix_fmt_mp->width, MTK_VENC_MIN_W, max_width);
- /* find next closer width align 16, heign align 32, size align
+ /* find next closer width align 16, height align 32, size align
* 64 rectangle
*/
tmp_w = pix_fmt_mp->width;
@@ -156,7 +156,7 @@ int venc_if_set_param(struct mtk_vcodec_enc_ctx *ctx,
* @ctx: device context
* @opt: encode frame option
* @frm_buf: input frame buffer information
- * @bs_buf: output bitstream buffer infomraiton
+ * @bs_buf: output bitstream buffer information
* @result: encode result
* Return: 0 if encoding frame successfully, otherwise it is failed.
*/