diff mbox series

media: mediatek: vcodec: add decoder command to support stateless decoder

Message ID 20240315072629.27738-1-yunfei.dong@mediatek.com (mailing list archive)
State New, archived
Headers show
Series media: mediatek: vcodec: add decoder command to support stateless decoder | expand

Commit Message

Yunfei Dong March 15, 2024, 7:26 a.m. UTC
The supported decoder commands are different for stateless and
stateful architecture. Adding stateless decoder commands to fix
below v4l2-compliance test error.

Codec ioctls:
    VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
    VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
 test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
    VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device)
 test VIDIOC_G_ENC_INDEX: OK (Not Supported)
    VIDIOC_DECODER_CMD returned -1 (Invalid argument)
    VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
    VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
    fail: v4l2-test-codecs.cpp(126): ret
 test VIDIOC_(TRY_)DECODER_CMD: FAIL

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
---
 .../mediatek/vcodec/decoder/mtk_vcodec_dec.c  | 65 +++++++++++++++++--
 1 file changed, 59 insertions(+), 6 deletions(-)

Comments

Sebastian Fricke March 15, 2024, 10:30 a.m. UTC | #1
Hey Yunfei,

On 15.03.2024 15:26, Yunfei Dong wrote:
>The supported decoder commands are different for stateless and
>stateful architecture. Adding stateless decoder commands to fix

s/Adding/Add/

>below v4l2-compliance test error.

s/below v4l2-compliance test error./the v4l2-compliance test error below./

>
>Codec ioctls:
>    VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
>    VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>    VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>    VIDIOC_DECODER_CMD returned -1 (Invalid argument)
>    VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
>    VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
>    fail: v4l2-test-codecs.cpp(126): ret
> test VIDIOC_(TRY_)DECODER_CMD: FAIL
>
>Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
>---
> .../mediatek/vcodec/decoder/mtk_vcodec_dec.c  | 65 +++++++++++++++++--
> 1 file changed, 59 insertions(+), 6 deletions(-)
>
>diff --git a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c
>index ba742f0e391d..90579dd92cae 100644
>--- a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c
>+++ b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c
>@@ -80,21 +80,20 @@ static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_dec_ctx *ctx,
> 	return &ctx->q_data[MTK_Q_DATA_DST];
> }
>
>-static int vidioc_try_decoder_cmd(struct file *file, void *priv,
>-				struct v4l2_decoder_cmd *cmd)
>+static int mtk_vcodec_stateful_try_decoder_cmd(struct file *file, void *priv,
>+					       struct v4l2_decoder_cmd *cmd)

In some cases you seem to name these functions with the prefix
`mtk_vdec` and sometimes with the prefix `mtk_vcodec` but all of these
are for decoders, so could you settle for one naming scheme? Also as
these functions are static I don't think it is strictly necessary to add
a prefix for each function.

> {
> 	return v4l2_m2m_ioctl_try_decoder_cmd(file, priv, cmd);
> }
>
>-
>-static int vidioc_decoder_cmd(struct file *file, void *priv,
>-				struct v4l2_decoder_cmd *cmd)
>+static int mtk_vcodec_stateful_decoder_cmd(struct file *file, void *priv,
>+					   struct v4l2_decoder_cmd *cmd)
> {
> 	struct mtk_vcodec_dec_ctx *ctx = fh_to_dec_ctx(priv);
> 	struct vb2_queue *src_vq, *dst_vq;
> 	int ret;
>
>-	ret = vidioc_try_decoder_cmd(file, priv, cmd);
>+	ret = mtk_vcodec_stateful_try_decoder_cmd(file, priv, cmd);
> 	if (ret)
> 		return ret;
>
>@@ -128,6 +127,60 @@ static int vidioc_decoder_cmd(struct file *file, void *priv,
> 	return 0;
> }
>
>+static int mtk_vcodec_stateless_try_decoder_cmd(struct file *file, void *priv,
>+						struct v4l2_decoder_cmd *cmd)
>+{
>+	return v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv, cmd);
>+}
>+
>+static int mtk_vcodec_stateless_decoder_cmd(struct file *file, void *priv,
>+					    struct v4l2_decoder_cmd *cmd)
>+{
>+	struct mtk_vcodec_dec_ctx *ctx = fh_to_dec_ctx(priv);
>+	int ret;
>+
>+	ret = v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv, cmd);
>+	if (ret)
>+		return ret;
>+
>+	mtk_v4l2_vdec_dbg(3, ctx, "decoder cmd=%u", cmd->cmd);
>+	switch (cmd->cmd) {
>+	case V4L2_DEC_CMD_FLUSH:
>+		/*
>+		 * If the flag of output buffer is set with V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF,

s/output/the output/
s/is set with/equals/

>+		 * this command will prevent dequeueing the capture buffer containing the last
>+		 * decoded frame. Or do nothing
>+		 */
>+		break;
>+

Please remove this newline.

>+	default:
>+		mtk_v4l2_vdec_err(ctx, "invalid stateless decoder cmd=%u", cmd->cmd);
>+		return -EINVAL;
>+	}
>+
>+	return 0;
>+}
>+
>+static int vidioc_try_decoder_cmd(struct file *file, void *priv, struct v4l2_decoder_cmd *cmd)
>+{
>+	struct mtk_vcodec_dec_ctx *ctx = fh_to_dec_ctx(priv);
>+
>+	if (ctx->dev->vdec_pdata->uses_stateless_api)
>+		return mtk_vcodec_stateless_try_decoder_cmd(file, priv, cmd);
>+	else

As these conditional branches contain return statements you can skip the
else.
E.g.
	if (ctx->dev->vdec_pdata->uses_stateless_api)
		return mtk_vcodec_stateless_try_decoder_cmd(file, priv, cmd);
   return mtk_vcodec_stateful_try_decoder_cmd(file, priv, cmd);

>+		return mtk_vcodec_stateful_try_decoder_cmd(file, priv, cmd);
>+}
>+
>+static int vidioc_decoder_cmd(struct file *file, void *priv, struct v4l2_decoder_cmd *cmd)
>+{
>+	struct mtk_vcodec_dec_ctx *ctx = fh_to_dec_ctx(priv);
>+
>+	if (ctx->dev->vdec_pdata->uses_stateless_api)
>+		return mtk_vcodec_stateless_decoder_cmd(file, priv, cmd);
>+	else

Same as mentioned above.

>+		return mtk_vcodec_stateful_decoder_cmd(file, priv, cmd);
>+}
>+
> void mtk_vdec_unlock(struct mtk_vcodec_dec_ctx *ctx)
> {
> 	mutex_unlock(&ctx->dev->dec_mutex[ctx->hw_id]);
>-- 
>2.18.0
>
diff mbox series

Patch

diff --git a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c
index ba742f0e391d..90579dd92cae 100644
--- a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c
@@ -80,21 +80,20 @@  static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_dec_ctx *ctx,
 	return &ctx->q_data[MTK_Q_DATA_DST];
 }
 
-static int vidioc_try_decoder_cmd(struct file *file, void *priv,
-				struct v4l2_decoder_cmd *cmd)
+static int mtk_vcodec_stateful_try_decoder_cmd(struct file *file, void *priv,
+					       struct v4l2_decoder_cmd *cmd)
 {
 	return v4l2_m2m_ioctl_try_decoder_cmd(file, priv, cmd);
 }
 
-
-static int vidioc_decoder_cmd(struct file *file, void *priv,
-				struct v4l2_decoder_cmd *cmd)
+static int mtk_vcodec_stateful_decoder_cmd(struct file *file, void *priv,
+					   struct v4l2_decoder_cmd *cmd)
 {
 	struct mtk_vcodec_dec_ctx *ctx = fh_to_dec_ctx(priv);
 	struct vb2_queue *src_vq, *dst_vq;
 	int ret;
 
-	ret = vidioc_try_decoder_cmd(file, priv, cmd);
+	ret = mtk_vcodec_stateful_try_decoder_cmd(file, priv, cmd);
 	if (ret)
 		return ret;
 
@@ -128,6 +127,60 @@  static int vidioc_decoder_cmd(struct file *file, void *priv,
 	return 0;
 }
 
+static int mtk_vcodec_stateless_try_decoder_cmd(struct file *file, void *priv,
+						struct v4l2_decoder_cmd *cmd)
+{
+	return v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv, cmd);
+}
+
+static int mtk_vcodec_stateless_decoder_cmd(struct file *file, void *priv,
+					    struct v4l2_decoder_cmd *cmd)
+{
+	struct mtk_vcodec_dec_ctx *ctx = fh_to_dec_ctx(priv);
+	int ret;
+
+	ret = v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv, cmd);
+	if (ret)
+		return ret;
+
+	mtk_v4l2_vdec_dbg(3, ctx, "decoder cmd=%u", cmd->cmd);
+	switch (cmd->cmd) {
+	case V4L2_DEC_CMD_FLUSH:
+		/*
+		 * If the flag of output buffer is set with V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF,
+		 * this command will prevent dequeueing the capture buffer containing the last
+		 * decoded frame. Or do nothing
+		 */
+		break;
+
+	default:
+		mtk_v4l2_vdec_err(ctx, "invalid stateless decoder cmd=%u", cmd->cmd);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int vidioc_try_decoder_cmd(struct file *file, void *priv, struct v4l2_decoder_cmd *cmd)
+{
+	struct mtk_vcodec_dec_ctx *ctx = fh_to_dec_ctx(priv);
+
+	if (ctx->dev->vdec_pdata->uses_stateless_api)
+		return mtk_vcodec_stateless_try_decoder_cmd(file, priv, cmd);
+	else
+		return mtk_vcodec_stateful_try_decoder_cmd(file, priv, cmd);
+}
+
+static int vidioc_decoder_cmd(struct file *file, void *priv, struct v4l2_decoder_cmd *cmd)
+{
+	struct mtk_vcodec_dec_ctx *ctx = fh_to_dec_ctx(priv);
+
+	if (ctx->dev->vdec_pdata->uses_stateless_api)
+		return mtk_vcodec_stateless_decoder_cmd(file, priv, cmd);
+	else
+		return mtk_vcodec_stateful_decoder_cmd(file, priv, cmd);
+}
+
 void mtk_vdec_unlock(struct mtk_vcodec_dec_ctx *ctx)
 {
 	mutex_unlock(&ctx->dev->dec_mutex[ctx->hw_id]);