| Message ID | 20240326-kms-hdmi-connector-state-v11-15-c5680ffcf261@kernel.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | drm/connector: Create HDMI Connector infrastructure | expand |
On Tue, Mar 26, 2024 at 04:40:19PM +0100, Maxime Ripard wrote: > Now that we have all the infrastructure needed, we can add some code > that will, for a given connector state and mode, compute the best output > format and bpc. > > The algorithm is equivalent to the one already found in i915 and vc4. > > Signed-off-by: Maxime Ripard <mripard@kernel.org> > --- > drivers/gpu/drm/display/drm_hdmi_state_helper.c | 197 ++++++++++++++++++++- > drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 25 ++- > 2 files changed, 210 insertions(+), 12 deletions(-) > > diff --git a/drivers/gpu/drm/display/drm_hdmi_state_helper.c b/drivers/gpu/drm/display/drm_hdmi_state_helper.c > index 063421835dba..b9bc0fb027ea 100644 > --- a/drivers/gpu/drm/display/drm_hdmi_state_helper.c > +++ b/drivers/gpu/drm/display/drm_hdmi_state_helper.c > @@ -1,9 +1,11 @@ > // SPDX-License-Identifier: MIT > > #include <drm/drm_atomic.h> > #include <drm/drm_connector.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_print.h> > > #include <drm/display/drm_hdmi_helper.h> > #include <drm/display/drm_hdmi_state_helper.h> > > /** > @@ -46,10 +48,110 @@ connector_state_get_mode(const struct drm_connector_state *conn_state) > return NULL; > > return &crtc_state->mode; > } > > +static bool > +sink_supports_format_bpc(const struct drm_connector *connector, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode, > + unsigned int format, unsigned int bpc) > +{ > + struct drm_device *dev = connector->dev; > + u8 vic = drm_match_cea_mode(mode); > + > + /* > + * CTA-861-F, section 5.4 - Color Coding & Quantization states > + * that the bpc must be 8, 10, 12 or 16 except for the default > + * 640x480 VIC1 where the value must be 8. > + * > + * The definition of default here is ambiguous but the spec > + * refers to VIC1 being the default timing in several occasions > + * so our understanding is that for the default timing (ie, > + * VIC1), the bpc must be 8. > + */ > + if (vic == 1 && bpc != 8) { > + drm_dbg_kms(dev, "VIC1 requires a bpc of 8, got %u\n", bpc); > + return false; > + } > + > + if (!info->is_hdmi && > + (format != HDMI_COLORSPACE_RGB || bpc != 8)) { > + drm_dbg_kms(dev, "DVI Monitors require an RGB output at 8 bpc\n"); > + return false; > + } > + > + if (!(connector->hdmi.supported_formats & BIT(format))) { These are the capabilities of the souce I take it? > + drm_dbg_kms(dev, "%s format unsupported by the connector.\n", > + drm_hdmi_connector_get_output_format_name(format)); > + return false; > + } > + > + switch (format) { > + case HDMI_COLORSPACE_RGB: > + drm_dbg_kms(dev, "RGB Format, checking the constraints.\n"); > + > + if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444)) > + return false; and this is the sink. Maybe we should use the same bits for both? Anyways, that seems like material for a followup series. > + > + if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) { > + drm_dbg_kms(dev, "10 BPC but sink doesn't support Deep Color 30.\n"); > + return false; > + } > + > + if (bpc == 12 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36)) { > + drm_dbg_kms(dev, "12 BPC but sink doesn't support Deep Color 36.\n"); > + return false; > + } > + > + drm_dbg_kms(dev, "RGB format supported in that configuration.\n"); > + > + return true; > + > + case HDMI_COLORSPACE_YUV422: > + drm_dbg_kms(dev, "YUV422 format, checking the constraints.\n"); > + > + if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) { > + drm_dbg_kms(dev, "Sink doesn't support YUV422.\n"); > + return false; > + } > + > + if (bpc != 12) { > + drm_dbg_kms(dev, "YUV422 only supports 12 bpc.\n"); > + return false; > + } Did something change around here from the last time? > + > + drm_dbg_kms(dev, "YUV422 format supported in that configuration.\n"); > + > + return true; > + > + case HDMI_COLORSPACE_YUV444: > + drm_dbg_kms(dev, "YUV444 format, checking the constraints.\n"); > + > + if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR444)) { > + drm_dbg_kms(dev, "Sink doesn't support YUV444.\n"); > + return false; > + } > + > + if (bpc == 10 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_30)) { > + drm_dbg_kms(dev, "10 BPC but sink doesn't support Deep Color 30.\n"); > + return false; > + } > + > + if (bpc == 12 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_36)) { > + drm_dbg_kms(dev, "12 BPC but sink doesn't support Deep Color 36.\n"); > + return false; > + } > + > + drm_dbg_kms(dev, "YUV444 format supported in that configuration.\n"); > + > + return true; > + } > + > + return false; > +} > + > static enum drm_mode_status > hdmi_clock_valid(const struct drm_connector *connector, > const struct drm_display_mode *mode, > unsigned long long clock) > { > @@ -90,10 +192,101 @@ hdmi_compute_clock(const struct drm_connector *connector, > conn_state->hdmi.tmds_char_rate = clock; > > return 0; > } > > +static bool > +hdmi_try_format_bpc(const struct drm_connector *connector, > + struct drm_connector_state *conn_state, > + const struct drm_display_mode *mode, > + unsigned int bpc, enum hdmi_colorspace fmt) > +{ > + const struct drm_display_info *info = &connector->display_info; > + struct drm_device *dev = connector->dev; > + int ret; > + > + drm_dbg_kms(dev, "Trying %s output format\n", > + drm_hdmi_connector_get_output_format_name(fmt)); > + > + if (!sink_supports_format_bpc(connector, info, mode, fmt, bpc)) { > + drm_dbg_kms(dev, "%s output format not supported with %u bpc\n", > + drm_hdmi_connector_get_output_format_name(fmt), > + bpc); > + return false; > + } > + > + ret = hdmi_compute_clock(connector, conn_state, mode, bpc, fmt); > + if (ret) { > + drm_dbg_kms(dev, "Couldn't compute clock for %s output format and %u bpc\n", > + drm_hdmi_connector_get_output_format_name(fmt), > + bpc); > + return false; > + } > + > + drm_dbg_kms(dev, "%s output format supported with %u (TMDS char rate: %llu Hz)\n", > + drm_hdmi_connector_get_output_format_name(fmt), > + bpc, conn_state->hdmi.tmds_char_rate); > + > + return true; > +} > + > +static int > +hdmi_compute_format(const struct drm_connector *connector, > + struct drm_connector_state *conn_state, > + const struct drm_display_mode *mode, > + unsigned int bpc) > +{ > + struct drm_device *dev = connector->dev; > + > + /* > + * TODO: Add support for YCbCr420 output for HDMI 2.0 capable > + * devices, for modes that only support YCbCr420. > + */ > + if (hdmi_try_format_bpc(connector, conn_state, mode, bpc, HDMI_COLORSPACE_RGB)) { > + conn_state->hdmi.output_format = HDMI_COLORSPACE_RGB; > + return 0; > + } > + > + drm_dbg_kms(dev, "Failed. No Format Supported for that bpc count.\n"); > + > + return -EINVAL; > +} > + > +static int > +hdmi_compute_config(const struct drm_connector *connector, > + struct drm_connector_state *conn_state, > + const struct drm_display_mode *mode) > +{ > + struct drm_device *dev = connector->dev; > + unsigned int max_bpc = clamp_t(unsigned int, > + conn_state->max_bpc, > + 8, connector->max_bpc); > + unsigned int bpc; > + int ret; > + > + for (bpc = max_bpc; bpc >= 8; bpc -= 2) { > + drm_dbg_kms(dev, "Trying with a %d bpc output\n", bpc); > + > + ret = hdmi_compute_format(connector, conn_state, mode, bpc); > + if (ret) > + continue; > + > + conn_state->hdmi.output_bpc = bpc; > + > + drm_dbg_kms(dev, > + "Mode %ux%u @ %uHz: Found configuration: bpc: %u, fmt: %s, clock: %llu\n", > + mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode), > + conn_state->hdmi.output_bpc, > + drm_hdmi_connector_get_output_format_name(conn_state->hdmi.output_format), > + conn_state->hdmi.tmds_char_rate); > + > + return 0; > + } > + > + return -EINVAL; > +} > + > /** > * drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state > * @connector: DRM Connector > * @state: the DRM State object > * > @@ -113,13 +306,11 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector, > drm_atomic_get_new_connector_state(state, connector); > const struct drm_display_mode *mode = > connector_state_get_mode(new_conn_state); > int ret; > > - ret = hdmi_compute_clock(connector, new_conn_state, mode, > - new_conn_state->hdmi.output_bpc, > - new_conn_state->hdmi.output_format); > + ret = hdmi_compute_config(connector, new_conn_state, mode); > if (ret) > return ret; > > if (old_conn_state->hdmi.output_bpc != new_conn_state->hdmi.output_bpc || > old_conn_state->hdmi.output_format != new_conn_state->hdmi.output_format) { > diff --git a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c > index ead998a691e7..a49a544d7b49 100644 > --- a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c > +++ b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c > @@ -70,13 +70,10 @@ static int light_up_connector(struct kunit *test, > KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); > > conn_state = drm_atomic_get_connector_state(state, connector); > KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); > > - conn_state->hdmi.output_bpc = connector->max_bpc; > - conn_state->hdmi.output_format = HDMI_COLORSPACE_RGB; > - > ret = drm_atomic_set_crtc_for_connector(conn_state, crtc); > KUNIT_EXPECT_EQ(test, ret, 0); > > crtc_state = drm_atomic_get_crtc_state(state, crtc); > KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); > @@ -251,14 +248,19 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test) > priv = drm_atomic_helper_connector_hdmi_init(test, > BIT(HDMI_COLORSPACE_RGB), > 10); > KUNIT_ASSERT_NOT_NULL(test, priv); > > + conn = &priv->connector; > + ret = set_connector_edid(test, conn, > + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz, > + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz)); > + KUNIT_ASSERT_EQ(test, ret, 0); > + > ctx = drm_kunit_helper_acquire_ctx_alloc(test); > KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); > > - conn = &priv->connector; > preferred = find_preferred_mode(conn); > KUNIT_ASSERT_NOT_NULL(test, preferred); > > drm = &priv->drm; > crtc = priv->crtc; > @@ -272,15 +274,15 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test) > KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state); > > old_conn_state = drm_atomic_get_old_connector_state(state, conn); > KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state); > > - new_conn_state->hdmi.output_bpc = 8; > + new_conn_state->max_requested_bpc = 8; > > KUNIT_ASSERT_NE(test, > - old_conn_state->hdmi.output_bpc, > - new_conn_state->hdmi.output_bpc); > + old_conn_state->max_requested_bpc, > + new_conn_state->max_requested_bpc); > > ret = drm_atomic_check_only(state); > KUNIT_ASSERT_EQ(test, ret, 0); > > old_conn_state = drm_atomic_get_old_connector_state(state, conn); > @@ -320,14 +322,19 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test) > priv = drm_atomic_helper_connector_hdmi_init(test, > BIT(HDMI_COLORSPACE_RGB), > 10); > KUNIT_ASSERT_NOT_NULL(test, priv); > > + conn = &priv->connector; > + ret = set_connector_edid(test, conn, > + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz, > + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz)); > + KUNIT_ASSERT_EQ(test, ret, 0); > + > ctx = drm_kunit_helper_acquire_ctx_alloc(test); > KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); > > - conn = &priv->connector; > preferred = find_preferred_mode(conn); > KUNIT_ASSERT_NOT_NULL(test, preferred); > > drm = &priv->drm; > crtc = priv->crtc; > @@ -670,11 +677,11 @@ static void drm_test_check_format_value(struct kunit *test) > 8); > KUNIT_ASSERT_NOT_NULL(test, priv); > > conn = &priv->connector; > conn_state = conn->state; > - KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); > + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, 0); > } > > /* > * Test that the value of the output format property out of reset is set > * to 0, and will be computed at atomic_check time. > > -- > 2.44.0
On Tue, Apr 16, 2024 at 04:50:58PM +0300, Ville Syrjälä wrote: > On Tue, Mar 26, 2024 at 04:40:19PM +0100, Maxime Ripard wrote: > > Now that we have all the infrastructure needed, we can add some code > > that will, for a given connector state and mode, compute the best output > > format and bpc. > > > > The algorithm is equivalent to the one already found in i915 and vc4. > > > > Signed-off-by: Maxime Ripard <mripard@kernel.org> > > --- > > drivers/gpu/drm/display/drm_hdmi_state_helper.c | 197 ++++++++++++++++++++- > > drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 25 ++- > > 2 files changed, 210 insertions(+), 12 deletions(-) > > > > diff --git a/drivers/gpu/drm/display/drm_hdmi_state_helper.c b/drivers/gpu/drm/display/drm_hdmi_state_helper.c > > index 063421835dba..b9bc0fb027ea 100644 > > --- a/drivers/gpu/drm/display/drm_hdmi_state_helper.c > > +++ b/drivers/gpu/drm/display/drm_hdmi_state_helper.c > > @@ -1,9 +1,11 @@ > > // SPDX-License-Identifier: MIT > > > > #include <drm/drm_atomic.h> > > #include <drm/drm_connector.h> > > +#include <drm/drm_edid.h> > > +#include <drm/drm_print.h> > > > > #include <drm/display/drm_hdmi_helper.h> > > #include <drm/display/drm_hdmi_state_helper.h> > > > > /** > > @@ -46,10 +48,110 @@ connector_state_get_mode(const struct drm_connector_state *conn_state) > > return NULL; > > > > return &crtc_state->mode; > > } > > > > +static bool > > +sink_supports_format_bpc(const struct drm_connector *connector, > > + const struct drm_display_info *info, > > + const struct drm_display_mode *mode, > > + unsigned int format, unsigned int bpc) > > +{ > > + struct drm_device *dev = connector->dev; > > + u8 vic = drm_match_cea_mode(mode); > > + > > + /* > > + * CTA-861-F, section 5.4 - Color Coding & Quantization states > > + * that the bpc must be 8, 10, 12 or 16 except for the default > > + * 640x480 VIC1 where the value must be 8. > > + * > > + * The definition of default here is ambiguous but the spec > > + * refers to VIC1 being the default timing in several occasions > > + * so our understanding is that for the default timing (ie, > > + * VIC1), the bpc must be 8. > > + */ > > + if (vic == 1 && bpc != 8) { > > + drm_dbg_kms(dev, "VIC1 requires a bpc of 8, got %u\n", bpc); > > + return false; > > + } > > + > > + if (!info->is_hdmi && > > + (format != HDMI_COLORSPACE_RGB || bpc != 8)) { > > + drm_dbg_kms(dev, "DVI Monitors require an RGB output at 8 bpc\n"); > > + return false; > > + } > > + > > + if (!(connector->hdmi.supported_formats & BIT(format))) { > > These are the capabilities of the souce I take it? > > > + drm_dbg_kms(dev, "%s format unsupported by the connector.\n", > > + drm_hdmi_connector_get_output_format_name(format)); > > + return false; > > + } > > + > > + switch (format) { > > + case HDMI_COLORSPACE_RGB: > > + drm_dbg_kms(dev, "RGB Format, checking the constraints.\n"); > > + > > + if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444)) > > + return false; > > and this is the sink. > > Maybe we should use the same bits for both? Anyways, that seems like > material for a followup series. Ack > > + > > + if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) { > > + drm_dbg_kms(dev, "10 BPC but sink doesn't support Deep Color 30.\n"); > > + return false; > > + } > > + > > + if (bpc == 12 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36)) { > > + drm_dbg_kms(dev, "12 BPC but sink doesn't support Deep Color 36.\n"); > > + return false; > > + } > > + > > + drm_dbg_kms(dev, "RGB format supported in that configuration.\n"); > > + > > + return true; > > + > > + case HDMI_COLORSPACE_YUV422: > > + drm_dbg_kms(dev, "YUV422 format, checking the constraints.\n"); > > + > > + if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) { > > + drm_dbg_kms(dev, "Sink doesn't support YUV422.\n"); > > + return false; > > + } > > + > > + if (bpc != 12) { > > + drm_dbg_kms(dev, "YUV422 only supports 12 bpc.\n"); > > + return false; > > + } > > Did something change around here from the last time? The format selection code now prefers to select a lower bpc rather than another format, which is what you asked for in the previous version.
diff --git a/drivers/gpu/drm/display/drm_hdmi_state_helper.c b/drivers/gpu/drm/display/drm_hdmi_state_helper.c index 063421835dba..b9bc0fb027ea 100644 --- a/drivers/gpu/drm/display/drm_hdmi_state_helper.c +++ b/drivers/gpu/drm/display/drm_hdmi_state_helper.c @@ -1,9 +1,11 @@ // SPDX-License-Identifier: MIT #include <drm/drm_atomic.h> #include <drm/drm_connector.h> +#include <drm/drm_edid.h> +#include <drm/drm_print.h> #include <drm/display/drm_hdmi_helper.h> #include <drm/display/drm_hdmi_state_helper.h> /** @@ -46,10 +48,110 @@ connector_state_get_mode(const struct drm_connector_state *conn_state) return NULL; return &crtc_state->mode; } +static bool +sink_supports_format_bpc(const struct drm_connector *connector, + const struct drm_display_info *info, + const struct drm_display_mode *mode, + unsigned int format, unsigned int bpc) +{ + struct drm_device *dev = connector->dev; + u8 vic = drm_match_cea_mode(mode); + + /* + * CTA-861-F, section 5.4 - Color Coding & Quantization states + * that the bpc must be 8, 10, 12 or 16 except for the default + * 640x480 VIC1 where the value must be 8. + * + * The definition of default here is ambiguous but the spec + * refers to VIC1 being the default timing in several occasions + * so our understanding is that for the default timing (ie, + * VIC1), the bpc must be 8. + */ + if (vic == 1 && bpc != 8) { + drm_dbg_kms(dev, "VIC1 requires a bpc of 8, got %u\n", bpc); + return false; + } + + if (!info->is_hdmi && + (format != HDMI_COLORSPACE_RGB || bpc != 8)) { + drm_dbg_kms(dev, "DVI Monitors require an RGB output at 8 bpc\n"); + return false; + } + + if (!(connector->hdmi.supported_formats & BIT(format))) { + drm_dbg_kms(dev, "%s format unsupported by the connector.\n", + drm_hdmi_connector_get_output_format_name(format)); + return false; + } + + switch (format) { + case HDMI_COLORSPACE_RGB: + drm_dbg_kms(dev, "RGB Format, checking the constraints.\n"); + + if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444)) + return false; + + if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) { + drm_dbg_kms(dev, "10 BPC but sink doesn't support Deep Color 30.\n"); + return false; + } + + if (bpc == 12 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36)) { + drm_dbg_kms(dev, "12 BPC but sink doesn't support Deep Color 36.\n"); + return false; + } + + drm_dbg_kms(dev, "RGB format supported in that configuration.\n"); + + return true; + + case HDMI_COLORSPACE_YUV422: + drm_dbg_kms(dev, "YUV422 format, checking the constraints.\n"); + + if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) { + drm_dbg_kms(dev, "Sink doesn't support YUV422.\n"); + return false; + } + + if (bpc != 12) { + drm_dbg_kms(dev, "YUV422 only supports 12 bpc.\n"); + return false; + } + + drm_dbg_kms(dev, "YUV422 format supported in that configuration.\n"); + + return true; + + case HDMI_COLORSPACE_YUV444: + drm_dbg_kms(dev, "YUV444 format, checking the constraints.\n"); + + if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR444)) { + drm_dbg_kms(dev, "Sink doesn't support YUV444.\n"); + return false; + } + + if (bpc == 10 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_30)) { + drm_dbg_kms(dev, "10 BPC but sink doesn't support Deep Color 30.\n"); + return false; + } + + if (bpc == 12 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_36)) { + drm_dbg_kms(dev, "12 BPC but sink doesn't support Deep Color 36.\n"); + return false; + } + + drm_dbg_kms(dev, "YUV444 format supported in that configuration.\n"); + + return true; + } + + return false; +} + static enum drm_mode_status hdmi_clock_valid(const struct drm_connector *connector, const struct drm_display_mode *mode, unsigned long long clock) { @@ -90,10 +192,101 @@ hdmi_compute_clock(const struct drm_connector *connector, conn_state->hdmi.tmds_char_rate = clock; return 0; } +static bool +hdmi_try_format_bpc(const struct drm_connector *connector, + struct drm_connector_state *conn_state, + const struct drm_display_mode *mode, + unsigned int bpc, enum hdmi_colorspace fmt) +{ + const struct drm_display_info *info = &connector->display_info; + struct drm_device *dev = connector->dev; + int ret; + + drm_dbg_kms(dev, "Trying %s output format\n", + drm_hdmi_connector_get_output_format_name(fmt)); + + if (!sink_supports_format_bpc(connector, info, mode, fmt, bpc)) { + drm_dbg_kms(dev, "%s output format not supported with %u bpc\n", + drm_hdmi_connector_get_output_format_name(fmt), + bpc); + return false; + } + + ret = hdmi_compute_clock(connector, conn_state, mode, bpc, fmt); + if (ret) { + drm_dbg_kms(dev, "Couldn't compute clock for %s output format and %u bpc\n", + drm_hdmi_connector_get_output_format_name(fmt), + bpc); + return false; + } + + drm_dbg_kms(dev, "%s output format supported with %u (TMDS char rate: %llu Hz)\n", + drm_hdmi_connector_get_output_format_name(fmt), + bpc, conn_state->hdmi.tmds_char_rate); + + return true; +} + +static int +hdmi_compute_format(const struct drm_connector *connector, + struct drm_connector_state *conn_state, + const struct drm_display_mode *mode, + unsigned int bpc) +{ + struct drm_device *dev = connector->dev; + + /* + * TODO: Add support for YCbCr420 output for HDMI 2.0 capable + * devices, for modes that only support YCbCr420. + */ + if (hdmi_try_format_bpc(connector, conn_state, mode, bpc, HDMI_COLORSPACE_RGB)) { + conn_state->hdmi.output_format = HDMI_COLORSPACE_RGB; + return 0; + } + + drm_dbg_kms(dev, "Failed. No Format Supported for that bpc count.\n"); + + return -EINVAL; +} + +static int +hdmi_compute_config(const struct drm_connector *connector, + struct drm_connector_state *conn_state, + const struct drm_display_mode *mode) +{ + struct drm_device *dev = connector->dev; + unsigned int max_bpc = clamp_t(unsigned int, + conn_state->max_bpc, + 8, connector->max_bpc); + unsigned int bpc; + int ret; + + for (bpc = max_bpc; bpc >= 8; bpc -= 2) { + drm_dbg_kms(dev, "Trying with a %d bpc output\n", bpc); + + ret = hdmi_compute_format(connector, conn_state, mode, bpc); + if (ret) + continue; + + conn_state->hdmi.output_bpc = bpc; + + drm_dbg_kms(dev, + "Mode %ux%u @ %uHz: Found configuration: bpc: %u, fmt: %s, clock: %llu\n", + mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode), + conn_state->hdmi.output_bpc, + drm_hdmi_connector_get_output_format_name(conn_state->hdmi.output_format), + conn_state->hdmi.tmds_char_rate); + + return 0; + } + + return -EINVAL; +} + /** * drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state * @connector: DRM Connector * @state: the DRM State object * @@ -113,13 +306,11 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector, drm_atomic_get_new_connector_state(state, connector); const struct drm_display_mode *mode = connector_state_get_mode(new_conn_state); int ret; - ret = hdmi_compute_clock(connector, new_conn_state, mode, - new_conn_state->hdmi.output_bpc, - new_conn_state->hdmi.output_format); + ret = hdmi_compute_config(connector, new_conn_state, mode); if (ret) return ret; if (old_conn_state->hdmi.output_bpc != new_conn_state->hdmi.output_bpc || old_conn_state->hdmi.output_format != new_conn_state->hdmi.output_format) { diff --git a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c index ead998a691e7..a49a544d7b49 100644 --- a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c +++ b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c @@ -70,13 +70,10 @@ static int light_up_connector(struct kunit *test, KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); conn_state = drm_atomic_get_connector_state(state, connector); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); - conn_state->hdmi.output_bpc = connector->max_bpc; - conn_state->hdmi.output_format = HDMI_COLORSPACE_RGB; - ret = drm_atomic_set_crtc_for_connector(conn_state, crtc); KUNIT_EXPECT_EQ(test, ret, 0); crtc_state = drm_atomic_get_crtc_state(state, crtc); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); @@ -251,14 +248,19 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test) priv = drm_atomic_helper_connector_hdmi_init(test, BIT(HDMI_COLORSPACE_RGB), 10); KUNIT_ASSERT_NOT_NULL(test, priv); + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz, + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz)); + KUNIT_ASSERT_EQ(test, ret, 0); + ctx = drm_kunit_helper_acquire_ctx_alloc(test); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); - conn = &priv->connector; preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); drm = &priv->drm; crtc = priv->crtc; @@ -272,15 +274,15 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test) KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state); old_conn_state = drm_atomic_get_old_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state); - new_conn_state->hdmi.output_bpc = 8; + new_conn_state->max_requested_bpc = 8; KUNIT_ASSERT_NE(test, - old_conn_state->hdmi.output_bpc, - new_conn_state->hdmi.output_bpc); + old_conn_state->max_requested_bpc, + new_conn_state->max_requested_bpc); ret = drm_atomic_check_only(state); KUNIT_ASSERT_EQ(test, ret, 0); old_conn_state = drm_atomic_get_old_connector_state(state, conn); @@ -320,14 +322,19 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test) priv = drm_atomic_helper_connector_hdmi_init(test, BIT(HDMI_COLORSPACE_RGB), 10); KUNIT_ASSERT_NOT_NULL(test, priv); + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz, + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz)); + KUNIT_ASSERT_EQ(test, ret, 0); + ctx = drm_kunit_helper_acquire_ctx_alloc(test); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); - conn = &priv->connector; preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); drm = &priv->drm; crtc = priv->crtc; @@ -670,11 +677,11 @@ static void drm_test_check_format_value(struct kunit *test) 8); KUNIT_ASSERT_NOT_NULL(test, priv); conn = &priv->connector; conn_state = conn->state; - KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, 0); } /* * Test that the value of the output format property out of reset is set * to 0, and will be computed at atomic_check time.
Now that we have all the infrastructure needed, we can add some code that will, for a given connector state and mode, compute the best output format and bpc. The algorithm is equivalent to the one already found in i915 and vc4. Signed-off-by: Maxime Ripard <mripard@kernel.org> --- drivers/gpu/drm/display/drm_hdmi_state_helper.c | 197 ++++++++++++++++++++- drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 25 ++- 2 files changed, 210 insertions(+), 12 deletions(-)