| Message ID | 20240327231710.53188-9-git@luigi311.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | v2: imx258 improvement series | expand |
Hi Luigi311, Thank you for the patchset. On Wed, Mar 27, 2024 at 05:16:54PM -0600, git@luigi311.com wrote: > From: Dave Stevenson <dave.stevenson@raspberrypi.com> > > There's no reason why only a clock of 19.2MHz is supported. > Indeed this isn't even a frequency listed in the datasheet. > > Add support for 24MHz as well. > The PLL settings result in slightly different link frequencies, > so parameterise those. > > Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > Signed-off-by: Luigi311 <git@luigi311.com> Is Luigi311 your real name? As per Documentation/process/submitting-patches.rst, anonymous (or pseudonym I'd say as well) contributions are not an option. > --- > drivers/media/i2c/imx258.c | 133 +++++++++++++++++++++++++++++-------- > 1 file changed, 107 insertions(+), 26 deletions(-) > > diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c > index 351add1bc5d5..6ee7de079454 100644 > --- a/drivers/media/i2c/imx258.c > +++ b/drivers/media/i2c/imx258.c > @@ -76,9 +76,6 @@ > #define REG_CONFIG_MIRROR_FLIP 0x03 > #define REG_CONFIG_FLIP_TEST_PATTERN 0x02 > > -/* Input clock frequency in Hz */ > -#define IMX258_INPUT_CLOCK_FREQ 19200000 > - > struct imx258_reg { > u16 address; > u8 val; > @@ -115,7 +112,9 @@ struct imx258_mode { > }; > > /* 4208x3120 needs 1267Mbps/lane, 4 lanes */ > -static const struct imx258_reg mipi_data_rate_1267mbps[] = { > +static const struct imx258_reg mipi_1267mbps_19_2mhz[] = { > + { 0x0136, 0x13 }, > + { 0x0137, 0x33 }, > { 0x0301, 0x05 }, > { 0x0303, 0x02 }, > { 0x0305, 0x03 }, > @@ -133,7 +132,29 @@ static const struct imx258_reg mipi_data_rate_1267mbps[] = { > { 0x0823, 0xCC }, > }; > > -static const struct imx258_reg mipi_data_rate_640mbps[] = { > +static const struct imx258_reg mipi_1272mbps_24mhz[] = { > + { 0x0136, 0x18 }, > + { 0x0137, 0x00 }, > + { 0x0301, 0x05 }, > + { 0x0303, 0x02 }, > + { 0x0305, 0x04 }, > + { 0x0306, 0x00 }, > + { 0x0307, 0xD4 }, > + { 0x0309, 0x0A }, > + { 0x030B, 0x01 }, > + { 0x030D, 0x02 }, > + { 0x030E, 0x00 }, > + { 0x030F, 0xD8 }, > + { 0x0310, 0x00 }, > + { 0x0820, 0x13 }, > + { 0x0821, 0x4C }, > + { 0x0822, 0xCC }, > + { 0x0823, 0xCC }, > +}; > + > +static const struct imx258_reg mipi_640mbps_19_2mhz[] = { > + { 0x0136, 0x13 }, > + { 0x0137, 0x33 }, > { 0x0301, 0x05 }, > { 0x0303, 0x02 }, > { 0x0305, 0x03 }, > @@ -151,9 +172,27 @@ static const struct imx258_reg mipi_data_rate_640mbps[] = { > { 0x0823, 0x00 }, > }; > > +static const struct imx258_reg mipi_642mbps_24mhz[] = { > + { 0x0136, 0x18 }, > + { 0x0137, 0x00 }, > + { 0x0301, 0x05 }, > + { 0x0303, 0x02 }, > + { 0x0305, 0x04 }, > + { 0x0306, 0x00 }, > + { 0x0307, 0x6B }, > + { 0x0309, 0x0A }, > + { 0x030B, 0x01 }, > + { 0x030D, 0x02 }, > + { 0x030E, 0x00 }, > + { 0x030F, 0xD8 }, > + { 0x0310, 0x00 }, > + { 0x0820, 0x0A }, > + { 0x0821, 0x00 }, > + { 0x0822, 0x00 }, > + { 0x0823, 0x00 }, > +}; > + > static const struct imx258_reg mode_common_regs[] = { > - { 0x0136, 0x13 }, > - { 0x0137, 0x33 }, > { 0x3051, 0x00 }, > { 0x3052, 0x00 }, > { 0x4E21, 0x14 }, > @@ -313,10 +352,6 @@ static const char * const imx258_supply_name[] = { > > #define IMX258_NUM_SUPPLIES ARRAY_SIZE(imx258_supply_name) > > -/* Configurations for supported link frequencies */ > -#define IMX258_LINK_FREQ_634MHZ 633600000ULL > -#define IMX258_LINK_FREQ_320MHZ 320000000ULL > - > enum { > IMX258_LINK_FREQ_1267MBPS, > IMX258_LINK_FREQ_640MBPS, > @@ -335,25 +370,55 @@ static u64 link_freq_to_pixel_rate(u64 f) > } > > /* Menu items for LINK_FREQ V4L2 control */ > -static const s64 link_freq_menu_items[] = { > +/* Configurations for supported link frequencies */ > +#define IMX258_LINK_FREQ_634MHZ 633600000ULL > +#define IMX258_LINK_FREQ_320MHZ 320000000ULL > + > +static const s64 link_freq_menu_items_19_2[] = { > IMX258_LINK_FREQ_634MHZ, > IMX258_LINK_FREQ_320MHZ, > }; > > +/* Configurations for supported link frequencies */ > +#define IMX258_LINK_FREQ_636MHZ 636000000ULL > +#define IMX258_LINK_FREQ_321MHZ 321000000ULL These values aren't used outside the array below and the macro names are imprecise anyway. Could you put the numerical values to the array instead? > + > +static const s64 link_freq_menu_items_24[] = { > + IMX258_LINK_FREQ_636MHZ, > + IMX258_LINK_FREQ_321MHZ, > +}; > + > /* Link frequency configs */ > -static const struct imx258_link_freq_config link_freq_configs[] = { > +static const struct imx258_link_freq_config link_freq_configs_19_2[] = { > [IMX258_LINK_FREQ_1267MBPS] = { > .pixels_per_line = IMX258_PPL_DEFAULT, > .reg_list = { > - .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps), > - .regs = mipi_data_rate_1267mbps, > + .num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz), > + .regs = mipi_1267mbps_19_2mhz, > } > }, > [IMX258_LINK_FREQ_640MBPS] = { > .pixels_per_line = IMX258_PPL_DEFAULT, > .reg_list = { > - .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps), > - .regs = mipi_data_rate_640mbps, > + .num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz), > + .regs = mipi_640mbps_19_2mhz, > + } > + }, > +}; > + > +static const struct imx258_link_freq_config link_freq_configs_24[] = { > + [IMX258_LINK_FREQ_1267MBPS] = { > + .pixels_per_line = IMX258_PPL_DEFAULT, > + .reg_list = { > + .num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz), > + .regs = mipi_1272mbps_24mhz, > + } > + }, > + [IMX258_LINK_FREQ_640MBPS] = { > + .pixels_per_line = IMX258_PPL_DEFAULT, > + .reg_list = { > + .num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz), > + .regs = mipi_642mbps_24mhz, > } > }, > }; > @@ -410,6 +475,9 @@ struct imx258 { > /* Current mode */ > const struct imx258_mode *cur_mode; > > + const struct imx258_link_freq_config *link_freq_configs; > + const s64 *link_freq_menu_items; > + > /* > * Mutex for serialized access: > * Protect sensor module set pad format and start/stop streaming safely. > @@ -713,7 +781,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, > imx258->cur_mode = mode; > __v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index); > > - link_freq = link_freq_menu_items[mode->link_freq_index]; > + link_freq = imx258->link_freq_menu_items[mode->link_freq_index]; > pixel_rate = link_freq_to_pixel_rate(link_freq); > __v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate); > /* Update limits and set FPS to default */ > @@ -727,7 +795,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, > vblank_def); > __v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def); > h_blank = > - link_freq_configs[mode->link_freq_index].pixels_per_line > + imx258->link_freq_configs[mode->link_freq_index].pixels_per_line > - imx258->cur_mode->width; > __v4l2_ctrl_modify_range(imx258->hblank, h_blank, > h_blank, 1, h_blank); > @@ -747,7 +815,7 @@ static int imx258_start_streaming(struct imx258 *imx258) > > /* Setup PLL */ > link_freq_index = imx258->cur_mode->link_freq_index; > - reg_list = &link_freq_configs[link_freq_index].reg_list; > + reg_list = &imx258->link_freq_configs[link_freq_index].reg_list; > ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs); > if (ret) { > dev_err(&client->dev, "%s failed to set plls\n", __func__); > @@ -946,9 +1014,9 @@ static int imx258_init_controls(struct imx258 *imx258) > imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, > &imx258_ctrl_ops, > V4L2_CID_LINK_FREQ, > - ARRAY_SIZE(link_freq_menu_items) - 1, > + ARRAY_SIZE(link_freq_menu_items_19_2) - 1, > 0, > - link_freq_menu_items); > + imx258->link_freq_menu_items); > > if (imx258->link_freq) > imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; > @@ -964,8 +1032,10 @@ static int imx258_init_controls(struct imx258 *imx258) > if (vflip) > vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > - pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]); > - pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]); > + pixel_rate_max = > + link_freq_to_pixel_rate(imx258->link_freq_menu_items[0]); > + pixel_rate_min = > + link_freq_to_pixel_rate(imx258->link_freq_menu_items[1]); The arrays currently have two entries so this works but it'd nice to have a bit more robust way to handle differences between the two arrays. Could you maintain e.g. the number of entries in the array in a struct field perhaps? > /* By default, PIXEL_RATE is read only */ > imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops, > V4L2_CID_PIXEL_RATE, > @@ -1086,8 +1156,19 @@ static int imx258_probe(struct i2c_client *client) > } else { > val = clk_get_rate(imx258->clk); > } > - if (val != IMX258_INPUT_CLOCK_FREQ) { > - dev_err(&client->dev, "input clock frequency not supported\n"); > + > + switch (val) { > + case 19200000: > + imx258->link_freq_configs = link_freq_configs_19_2; > + imx258->link_freq_menu_items = link_freq_menu_items_19_2; > + break; > + case 24000000: > + imx258->link_freq_configs = link_freq_configs_24; > + imx258->link_freq_menu_items = link_freq_menu_items_24; > + break; > + default: > + dev_err(&client->dev, "input clock frequency of %u not supported\n", > + val); > return -EINVAL; > } >
On 3/28/24 02:09, Sakari Ailus wrote: > Hi Luigi311, > > Thank you for the patchset. > > On Wed, Mar 27, 2024 at 05:16:54PM -0600, git@luigi311.com wrote: >> From: Dave Stevenson <dave.stevenson@raspberrypi.com> >> >> There's no reason why only a clock of 19.2MHz is supported. >> Indeed this isn't even a frequency listed in the datasheet. >> >> Add support for 24MHz as well. >> The PLL settings result in slightly different link frequencies, >> so parameterise those. >> >> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> >> Signed-off-by: Luigi311 <git@luigi311.com> > > Is Luigi311 your real name? As per > Documentation/process/submitting-patches.rst, anonymous (or pseudonym I'd > say as well) contributions are not an option. Luigi311 is not my real name but it would be a lot easier to find me if it was. My real name is Luis Garcia which is a super common name so its actually way easier to find me and all my work using my online name of Luigi311. I can go ahead and swap over to Luis Garcia if required but a name like that would provide no value in contacting/finding me since I'm not famous like all the other Luis Garcia's that appear on google. > >> --- >> drivers/media/i2c/imx258.c | 133 +++++++++++++++++++++++++++++-------- >> 1 file changed, 107 insertions(+), 26 deletions(-) >> >> diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c >> index 351add1bc5d5..6ee7de079454 100644 >> --- a/drivers/media/i2c/imx258.c >> +++ b/drivers/media/i2c/imx258.c >> @@ -76,9 +76,6 @@ >> #define REG_CONFIG_MIRROR_FLIP 0x03 >> #define REG_CONFIG_FLIP_TEST_PATTERN 0x02 >> >> -/* Input clock frequency in Hz */ >> -#define IMX258_INPUT_CLOCK_FREQ 19200000 >> - >> struct imx258_reg { >> u16 address; >> u8 val; >> @@ -115,7 +112,9 @@ struct imx258_mode { >> }; >> >> /* 4208x3120 needs 1267Mbps/lane, 4 lanes */ >> -static const struct imx258_reg mipi_data_rate_1267mbps[] = { >> +static const struct imx258_reg mipi_1267mbps_19_2mhz[] = { >> + { 0x0136, 0x13 }, >> + { 0x0137, 0x33 }, >> { 0x0301, 0x05 }, >> { 0x0303, 0x02 }, >> { 0x0305, 0x03 }, >> @@ -133,7 +132,29 @@ static const struct imx258_reg mipi_data_rate_1267mbps[] = { >> { 0x0823, 0xCC }, >> }; >> >> -static const struct imx258_reg mipi_data_rate_640mbps[] = { >> +static const struct imx258_reg mipi_1272mbps_24mhz[] = { >> + { 0x0136, 0x18 }, >> + { 0x0137, 0x00 }, >> + { 0x0301, 0x05 }, >> + { 0x0303, 0x02 }, >> + { 0x0305, 0x04 }, >> + { 0x0306, 0x00 }, >> + { 0x0307, 0xD4 }, >> + { 0x0309, 0x0A }, >> + { 0x030B, 0x01 }, >> + { 0x030D, 0x02 }, >> + { 0x030E, 0x00 }, >> + { 0x030F, 0xD8 }, >> + { 0x0310, 0x00 }, >> + { 0x0820, 0x13 }, >> + { 0x0821, 0x4C }, >> + { 0x0822, 0xCC }, >> + { 0x0823, 0xCC }, >> +}; >> + >> +static const struct imx258_reg mipi_640mbps_19_2mhz[] = { >> + { 0x0136, 0x13 }, >> + { 0x0137, 0x33 }, >> { 0x0301, 0x05 }, >> { 0x0303, 0x02 }, >> { 0x0305, 0x03 }, >> @@ -151,9 +172,27 @@ static const struct imx258_reg mipi_data_rate_640mbps[] = { >> { 0x0823, 0x00 }, >> }; >> >> +static const struct imx258_reg mipi_642mbps_24mhz[] = { >> + { 0x0136, 0x18 }, >> + { 0x0137, 0x00 }, >> + { 0x0301, 0x05 }, >> + { 0x0303, 0x02 }, >> + { 0x0305, 0x04 }, >> + { 0x0306, 0x00 }, >> + { 0x0307, 0x6B }, >> + { 0x0309, 0x0A }, >> + { 0x030B, 0x01 }, >> + { 0x030D, 0x02 }, >> + { 0x030E, 0x00 }, >> + { 0x030F, 0xD8 }, >> + { 0x0310, 0x00 }, >> + { 0x0820, 0x0A }, >> + { 0x0821, 0x00 }, >> + { 0x0822, 0x00 }, >> + { 0x0823, 0x00 }, >> +}; >> + >> static const struct imx258_reg mode_common_regs[] = { >> - { 0x0136, 0x13 }, >> - { 0x0137, 0x33 }, >> { 0x3051, 0x00 }, >> { 0x3052, 0x00 }, >> { 0x4E21, 0x14 }, >> @@ -313,10 +352,6 @@ static const char * const imx258_supply_name[] = { >> >> #define IMX258_NUM_SUPPLIES ARRAY_SIZE(imx258_supply_name) >> >> -/* Configurations for supported link frequencies */ >> -#define IMX258_LINK_FREQ_634MHZ 633600000ULL >> -#define IMX258_LINK_FREQ_320MHZ 320000000ULL >> - >> enum { >> IMX258_LINK_FREQ_1267MBPS, >> IMX258_LINK_FREQ_640MBPS, >> @@ -335,25 +370,55 @@ static u64 link_freq_to_pixel_rate(u64 f) >> } >> >> /* Menu items for LINK_FREQ V4L2 control */ >> -static const s64 link_freq_menu_items[] = { >> +/* Configurations for supported link frequencies */ >> +#define IMX258_LINK_FREQ_634MHZ 633600000ULL >> +#define IMX258_LINK_FREQ_320MHZ 320000000ULL >> + >> +static const s64 link_freq_menu_items_19_2[] = { >> IMX258_LINK_FREQ_634MHZ, >> IMX258_LINK_FREQ_320MHZ, >> }; >> >> +/* Configurations for supported link frequencies */ >> +#define IMX258_LINK_FREQ_636MHZ 636000000ULL >> +#define IMX258_LINK_FREQ_321MHZ 321000000ULL > > These values aren't used outside the array below and the macro names are > imprecise anyway. Could you put the numerical values to the array instead? Ok I've removed the defines and just threw the values into the array instead. > >> + >> +static const s64 link_freq_menu_items_24[] = { >> + IMX258_LINK_FREQ_636MHZ, >> + IMX258_LINK_FREQ_321MHZ, >> +}; >> + >> /* Link frequency configs */ >> -static const struct imx258_link_freq_config link_freq_configs[] = { >> +static const struct imx258_link_freq_config link_freq_configs_19_2[] = { >> [IMX258_LINK_FREQ_1267MBPS] = { >> .pixels_per_line = IMX258_PPL_DEFAULT, >> .reg_list = { >> - .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps), >> - .regs = mipi_data_rate_1267mbps, >> + .num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz), >> + .regs = mipi_1267mbps_19_2mhz, >> } >> }, >> [IMX258_LINK_FREQ_640MBPS] = { >> .pixels_per_line = IMX258_PPL_DEFAULT, >> .reg_list = { >> - .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps), >> - .regs = mipi_data_rate_640mbps, >> + .num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz), >> + .regs = mipi_640mbps_19_2mhz, >> + } >> + }, >> +}; >> + >> +static const struct imx258_link_freq_config link_freq_configs_24[] = { >> + [IMX258_LINK_FREQ_1267MBPS] = { >> + .pixels_per_line = IMX258_PPL_DEFAULT, >> + .reg_list = { >> + .num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz), >> + .regs = mipi_1272mbps_24mhz, >> + } >> + }, >> + [IMX258_LINK_FREQ_640MBPS] = { >> + .pixels_per_line = IMX258_PPL_DEFAULT, >> + .reg_list = { >> + .num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz), >> + .regs = mipi_642mbps_24mhz, >> } >> }, >> }; >> @@ -410,6 +475,9 @@ struct imx258 { >> /* Current mode */ >> const struct imx258_mode *cur_mode; >> >> + const struct imx258_link_freq_config *link_freq_configs; >> + const s64 *link_freq_menu_items; >> + >> /* >> * Mutex for serialized access: >> * Protect sensor module set pad format and start/stop streaming safely. >> @@ -713,7 +781,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, >> imx258->cur_mode = mode; >> __v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index); >> >> - link_freq = link_freq_menu_items[mode->link_freq_index]; >> + link_freq = imx258->link_freq_menu_items[mode->link_freq_index]; >> pixel_rate = link_freq_to_pixel_rate(link_freq); >> __v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate); >> /* Update limits and set FPS to default */ >> @@ -727,7 +795,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, >> vblank_def); >> __v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def); >> h_blank = >> - link_freq_configs[mode->link_freq_index].pixels_per_line >> + imx258->link_freq_configs[mode->link_freq_index].pixels_per_line >> - imx258->cur_mode->width; >> __v4l2_ctrl_modify_range(imx258->hblank, h_blank, >> h_blank, 1, h_blank); >> @@ -747,7 +815,7 @@ static int imx258_start_streaming(struct imx258 *imx258) >> >> /* Setup PLL */ >> link_freq_index = imx258->cur_mode->link_freq_index; >> - reg_list = &link_freq_configs[link_freq_index].reg_list; >> + reg_list = &imx258->link_freq_configs[link_freq_index].reg_list; >> ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs); >> if (ret) { >> dev_err(&client->dev, "%s failed to set plls\n", __func__); >> @@ -946,9 +1014,9 @@ static int imx258_init_controls(struct imx258 *imx258) >> imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, >> &imx258_ctrl_ops, >> V4L2_CID_LINK_FREQ, >> - ARRAY_SIZE(link_freq_menu_items) - 1, >> + ARRAY_SIZE(link_freq_menu_items_19_2) - 1, >> 0, >> - link_freq_menu_items); >> + imx258->link_freq_menu_items); >> >> if (imx258->link_freq) >> imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; >> @@ -964,8 +1032,10 @@ static int imx258_init_controls(struct imx258 *imx258) >> if (vflip) >> vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY; >> >> - pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]); >> - pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]); >> + pixel_rate_max = >> + link_freq_to_pixel_rate(imx258->link_freq_menu_items[0]); >> + pixel_rate_min = >> + link_freq_to_pixel_rate(imx258->link_freq_menu_items[1]); > > The arrays currently have two entries so this works but it'd nice to have a > bit more robust way to handle differences between the two arrays. Could you > maintain e.g. the number of entries in the array in a struct field perhaps? Would it make more sense to do something like default to index 0 and then use ARRAY_SIZE to iterate through the array and do a comparison to get the min and max size so it would always choose the correct value no matter how many entries there are? > >> /* By default, PIXEL_RATE is read only */ >> imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops, >> V4L2_CID_PIXEL_RATE, >> @@ -1086,8 +1156,19 @@ static int imx258_probe(struct i2c_client *client) >> } else { >> val = clk_get_rate(imx258->clk); >> } >> - if (val != IMX258_INPUT_CLOCK_FREQ) { >> - dev_err(&client->dev, "input clock frequency not supported\n"); >> + >> + switch (val) { >> + case 19200000: >> + imx258->link_freq_configs = link_freq_configs_19_2; >> + imx258->link_freq_menu_items = link_freq_menu_items_19_2; >> + break; >> + case 24000000: >> + imx258->link_freq_configs = link_freq_configs_24; >> + imx258->link_freq_menu_items = link_freq_menu_items_24; >> + break; >> + default: >> + dev_err(&client->dev, "input clock frequency of %u not supported\n", >> + val); >> return -EINVAL; >> } >> >
On 3/28/24 11:55, Luigi311 wrote: > On 3/28/24 02:09, Sakari Ailus wrote: >> Hi Luigi311, >> >> Thank you for the patchset. >> >> On Wed, Mar 27, 2024 at 05:16:54PM -0600, git@luigi311.com wrote: >>> From: Dave Stevenson <dave.stevenson@raspberrypi.com> >>> >>> There's no reason why only a clock of 19.2MHz is supported. >>> Indeed this isn't even a frequency listed in the datasheet. >>> >>> Add support for 24MHz as well. >>> The PLL settings result in slightly different link frequencies, >>> so parameterise those. >>> >>> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> >>> Signed-off-by: Luigi311 <git@luigi311.com> >> >> Is Luigi311 your real name? As per >> Documentation/process/submitting-patches.rst, anonymous (or pseudonym I'd >> say as well) contributions are not an option. > > Luigi311 is not my real name but it would be a lot easier to find me if > it was. My real name is Luis Garcia which is a super common name so its > actually way easier to find me and all my work using my online name of > Luigi311. I can go ahead and swap over to Luis Garcia if required but a > name like that would provide no value in contacting/finding me since I'm > not famous like all the other Luis Garcia's that appear on google. > >> >>> --- >>> drivers/media/i2c/imx258.c | 133 +++++++++++++++++++++++++++++-------- >>> 1 file changed, 107 insertions(+), 26 deletions(-) >>> >>> diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c >>> index 351add1bc5d5..6ee7de079454 100644 >>> --- a/drivers/media/i2c/imx258.c >>> +++ b/drivers/media/i2c/imx258.c >>> @@ -76,9 +76,6 @@ >>> #define REG_CONFIG_MIRROR_FLIP 0x03 >>> #define REG_CONFIG_FLIP_TEST_PATTERN 0x02 >>> >>> -/* Input clock frequency in Hz */ >>> -#define IMX258_INPUT_CLOCK_FREQ 19200000 >>> - >>> struct imx258_reg { >>> u16 address; >>> u8 val; >>> @@ -115,7 +112,9 @@ struct imx258_mode { >>> }; >>> >>> /* 4208x3120 needs 1267Mbps/lane, 4 lanes */ >>> -static const struct imx258_reg mipi_data_rate_1267mbps[] = { >>> +static const struct imx258_reg mipi_1267mbps_19_2mhz[] = { >>> + { 0x0136, 0x13 }, >>> + { 0x0137, 0x33 }, >>> { 0x0301, 0x05 }, >>> { 0x0303, 0x02 }, >>> { 0x0305, 0x03 }, >>> @@ -133,7 +132,29 @@ static const struct imx258_reg mipi_data_rate_1267mbps[] = { >>> { 0x0823, 0xCC }, >>> }; >>> >>> -static const struct imx258_reg mipi_data_rate_640mbps[] = { >>> +static const struct imx258_reg mipi_1272mbps_24mhz[] = { >>> + { 0x0136, 0x18 }, >>> + { 0x0137, 0x00 }, >>> + { 0x0301, 0x05 }, >>> + { 0x0303, 0x02 }, >>> + { 0x0305, 0x04 }, >>> + { 0x0306, 0x00 }, >>> + { 0x0307, 0xD4 }, >>> + { 0x0309, 0x0A }, >>> + { 0x030B, 0x01 }, >>> + { 0x030D, 0x02 }, >>> + { 0x030E, 0x00 }, >>> + { 0x030F, 0xD8 }, >>> + { 0x0310, 0x00 }, >>> + { 0x0820, 0x13 }, >>> + { 0x0821, 0x4C }, >>> + { 0x0822, 0xCC }, >>> + { 0x0823, 0xCC }, >>> +}; >>> + >>> +static const struct imx258_reg mipi_640mbps_19_2mhz[] = { >>> + { 0x0136, 0x13 }, >>> + { 0x0137, 0x33 }, >>> { 0x0301, 0x05 }, >>> { 0x0303, 0x02 }, >>> { 0x0305, 0x03 }, >>> @@ -151,9 +172,27 @@ static const struct imx258_reg mipi_data_rate_640mbps[] = { >>> { 0x0823, 0x00 }, >>> }; >>> >>> +static const struct imx258_reg mipi_642mbps_24mhz[] = { >>> + { 0x0136, 0x18 }, >>> + { 0x0137, 0x00 }, >>> + { 0x0301, 0x05 }, >>> + { 0x0303, 0x02 }, >>> + { 0x0305, 0x04 }, >>> + { 0x0306, 0x00 }, >>> + { 0x0307, 0x6B }, >>> + { 0x0309, 0x0A }, >>> + { 0x030B, 0x01 }, >>> + { 0x030D, 0x02 }, >>> + { 0x030E, 0x00 }, >>> + { 0x030F, 0xD8 }, >>> + { 0x0310, 0x00 }, >>> + { 0x0820, 0x0A }, >>> + { 0x0821, 0x00 }, >>> + { 0x0822, 0x00 }, >>> + { 0x0823, 0x00 }, >>> +}; >>> + >>> static const struct imx258_reg mode_common_regs[] = { >>> - { 0x0136, 0x13 }, >>> - { 0x0137, 0x33 }, >>> { 0x3051, 0x00 }, >>> { 0x3052, 0x00 }, >>> { 0x4E21, 0x14 }, >>> @@ -313,10 +352,6 @@ static const char * const imx258_supply_name[] = { >>> >>> #define IMX258_NUM_SUPPLIES ARRAY_SIZE(imx258_supply_name) >>> >>> -/* Configurations for supported link frequencies */ >>> -#define IMX258_LINK_FREQ_634MHZ 633600000ULL >>> -#define IMX258_LINK_FREQ_320MHZ 320000000ULL >>> - >>> enum { >>> IMX258_LINK_FREQ_1267MBPS, >>> IMX258_LINK_FREQ_640MBPS, >>> @@ -335,25 +370,55 @@ static u64 link_freq_to_pixel_rate(u64 f) >>> } >>> >>> /* Menu items for LINK_FREQ V4L2 control */ >>> -static const s64 link_freq_menu_items[] = { >>> +/* Configurations for supported link frequencies */ >>> +#define IMX258_LINK_FREQ_634MHZ 633600000ULL >>> +#define IMX258_LINK_FREQ_320MHZ 320000000ULL >>> + >>> +static const s64 link_freq_menu_items_19_2[] = { >>> IMX258_LINK_FREQ_634MHZ, >>> IMX258_LINK_FREQ_320MHZ, >>> }; >>> >>> +/* Configurations for supported link frequencies */ >>> +#define IMX258_LINK_FREQ_636MHZ 636000000ULL >>> +#define IMX258_LINK_FREQ_321MHZ 321000000ULL >> >> These values aren't used outside the array below and the macro names are >> imprecise anyway. Could you put the numerical values to the array instead? > > Ok I've removed the defines and just threw the values into the array instead. > >> >>> + >>> +static const s64 link_freq_menu_items_24[] = { >>> + IMX258_LINK_FREQ_636MHZ, >>> + IMX258_LINK_FREQ_321MHZ, >>> +}; >>> + >>> /* Link frequency configs */ >>> -static const struct imx258_link_freq_config link_freq_configs[] = { >>> +static const struct imx258_link_freq_config link_freq_configs_19_2[] = { >>> [IMX258_LINK_FREQ_1267MBPS] = { >>> .pixels_per_line = IMX258_PPL_DEFAULT, >>> .reg_list = { >>> - .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps), >>> - .regs = mipi_data_rate_1267mbps, >>> + .num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz), >>> + .regs = mipi_1267mbps_19_2mhz, >>> } >>> }, >>> [IMX258_LINK_FREQ_640MBPS] = { >>> .pixels_per_line = IMX258_PPL_DEFAULT, >>> .reg_list = { >>> - .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps), >>> - .regs = mipi_data_rate_640mbps, >>> + .num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz), >>> + .regs = mipi_640mbps_19_2mhz, >>> + } >>> + }, >>> +}; >>> + >>> +static const struct imx258_link_freq_config link_freq_configs_24[] = { >>> + [IMX258_LINK_FREQ_1267MBPS] = { >>> + .pixels_per_line = IMX258_PPL_DEFAULT, >>> + .reg_list = { >>> + .num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz), >>> + .regs = mipi_1272mbps_24mhz, >>> + } >>> + }, >>> + [IMX258_LINK_FREQ_640MBPS] = { >>> + .pixels_per_line = IMX258_PPL_DEFAULT, >>> + .reg_list = { >>> + .num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz), >>> + .regs = mipi_642mbps_24mhz, >>> } >>> }, >>> }; >>> @@ -410,6 +475,9 @@ struct imx258 { >>> /* Current mode */ >>> const struct imx258_mode *cur_mode; >>> >>> + const struct imx258_link_freq_config *link_freq_configs; >>> + const s64 *link_freq_menu_items; >>> + >>> /* >>> * Mutex for serialized access: >>> * Protect sensor module set pad format and start/stop streaming safely. >>> @@ -713,7 +781,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, >>> imx258->cur_mode = mode; >>> __v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index); >>> >>> - link_freq = link_freq_menu_items[mode->link_freq_index]; >>> + link_freq = imx258->link_freq_menu_items[mode->link_freq_index]; >>> pixel_rate = link_freq_to_pixel_rate(link_freq); >>> __v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate); >>> /* Update limits and set FPS to default */ >>> @@ -727,7 +795,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, >>> vblank_def); >>> __v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def); >>> h_blank = >>> - link_freq_configs[mode->link_freq_index].pixels_per_line >>> + imx258->link_freq_configs[mode->link_freq_index].pixels_per_line >>> - imx258->cur_mode->width; >>> __v4l2_ctrl_modify_range(imx258->hblank, h_blank, >>> h_blank, 1, h_blank); >>> @@ -747,7 +815,7 @@ static int imx258_start_streaming(struct imx258 *imx258) >>> >>> /* Setup PLL */ >>> link_freq_index = imx258->cur_mode->link_freq_index; >>> - reg_list = &link_freq_configs[link_freq_index].reg_list; >>> + reg_list = &imx258->link_freq_configs[link_freq_index].reg_list; >>> ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs); >>> if (ret) { >>> dev_err(&client->dev, "%s failed to set plls\n", __func__); >>> @@ -946,9 +1014,9 @@ static int imx258_init_controls(struct imx258 *imx258) >>> imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, >>> &imx258_ctrl_ops, >>> V4L2_CID_LINK_FREQ, >>> - ARRAY_SIZE(link_freq_menu_items) - 1, >>> + ARRAY_SIZE(link_freq_menu_items_19_2) - 1, >>> 0, >>> - link_freq_menu_items); >>> + imx258->link_freq_menu_items); >>> >>> if (imx258->link_freq) >>> imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; >>> @@ -964,8 +1032,10 @@ static int imx258_init_controls(struct imx258 *imx258) >>> if (vflip) >>> vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY; >>> >>> - pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]); >>> - pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]); >>> + pixel_rate_max = >>> + link_freq_to_pixel_rate(imx258->link_freq_menu_items[0]); >>> + pixel_rate_min = >>> + link_freq_to_pixel_rate(imx258->link_freq_menu_items[1]); >> >> The arrays currently have two entries so this works but it'd nice to have a >> bit more robust way to handle differences between the two arrays. Could you >> maintain e.g. the number of entries in the array in a struct field perhaps? > > Would it make more sense to do something like default to index 0 and then use > ARRAY_SIZE to iterate through the array and do a comparison to get the min and > max size so it would always choose the correct value no matter how many entries > there are? > Actually down the patch series 15/23 set pixel_rate range to the same as the value, changes the logic and removes those two lines all together >> >>> /* By default, PIXEL_RATE is read only */ >>> imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops, >>> V4L2_CID_PIXEL_RATE, >>> @@ -1086,8 +1156,19 @@ static int imx258_probe(struct i2c_client *client) >>> } else { >>> val = clk_get_rate(imx258->clk); >>> } >>> - if (val != IMX258_INPUT_CLOCK_FREQ) { >>> - dev_err(&client->dev, "input clock frequency not supported\n"); >>> + >>> + switch (val) { >>> + case 19200000: >>> + imx258->link_freq_configs = link_freq_configs_19_2; >>> + imx258->link_freq_menu_items = link_freq_menu_items_19_2; >>> + break; >>> + case 24000000: >>> + imx258->link_freq_configs = link_freq_configs_24; >>> + imx258->link_freq_menu_items = link_freq_menu_items_24; >>> + break; >>> + default: >>> + dev_err(&client->dev, "input clock frequency of %u not supported\n", >>> + val); >>> return -EINVAL; >>> } >>> >> >
Hi Luigi311, On Thu, Mar 28, 2024 at 11:55:24AM -0600, Luigi311 wrote: > On 3/28/24 02:09, Sakari Ailus wrote: > > Hi Luigi311, > > > > Thank you for the patchset. > > > > On Wed, Mar 27, 2024 at 05:16:54PM -0600, git@luigi311.com wrote: > >> From: Dave Stevenson <dave.stevenson@raspberrypi.com> > >> > >> There's no reason why only a clock of 19.2MHz is supported. > >> Indeed this isn't even a frequency listed in the datasheet. > >> > >> Add support for 24MHz as well. > >> The PLL settings result in slightly different link frequencies, > >> so parameterise those. > >> > >> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > >> Signed-off-by: Luigi311 <git@luigi311.com> > > > > Is Luigi311 your real name? As per > > Documentation/process/submitting-patches.rst, anonymous (or pseudonym I'd > > say as well) contributions are not an option. > > Luigi311 is not my real name but it would be a lot easier to find me if > it was. My real name is Luis Garcia which is a super common name so its > actually way easier to find me and all my work using my online name of > Luigi311. I can go ahead and swap over to Luis Garcia if required but a > name like that would provide no value in contacting/finding me since I'm > not famous like all the other Luis Garcia's that appear on google. Thanks. E-mail addresses are still unique, presumably, so that helps. > > > > >> --- > >> drivers/media/i2c/imx258.c | 133 +++++++++++++++++++++++++++++-------- > >> 1 file changed, 107 insertions(+), 26 deletions(-) > >> > >> diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c > >> index 351add1bc5d5..6ee7de079454 100644 > >> --- a/drivers/media/i2c/imx258.c > >> +++ b/drivers/media/i2c/imx258.c > >> @@ -76,9 +76,6 @@ > >> #define REG_CONFIG_MIRROR_FLIP 0x03 > >> #define REG_CONFIG_FLIP_TEST_PATTERN 0x02 > >> > >> -/* Input clock frequency in Hz */ > >> -#define IMX258_INPUT_CLOCK_FREQ 19200000 > >> - > >> struct imx258_reg { > >> u16 address; > >> u8 val; > >> @@ -115,7 +112,9 @@ struct imx258_mode { > >> }; > >> > >> /* 4208x3120 needs 1267Mbps/lane, 4 lanes */ > >> -static const struct imx258_reg mipi_data_rate_1267mbps[] = { > >> +static const struct imx258_reg mipi_1267mbps_19_2mhz[] = { > >> + { 0x0136, 0x13 }, > >> + { 0x0137, 0x33 }, > >> { 0x0301, 0x05 }, > >> { 0x0303, 0x02 }, > >> { 0x0305, 0x03 }, > >> @@ -133,7 +132,29 @@ static const struct imx258_reg mipi_data_rate_1267mbps[] = { > >> { 0x0823, 0xCC }, > >> }; > >> > >> -static const struct imx258_reg mipi_data_rate_640mbps[] = { > >> +static const struct imx258_reg mipi_1272mbps_24mhz[] = { > >> + { 0x0136, 0x18 }, > >> + { 0x0137, 0x00 }, > >> + { 0x0301, 0x05 }, > >> + { 0x0303, 0x02 }, > >> + { 0x0305, 0x04 }, > >> + { 0x0306, 0x00 }, > >> + { 0x0307, 0xD4 }, > >> + { 0x0309, 0x0A }, > >> + { 0x030B, 0x01 }, > >> + { 0x030D, 0x02 }, > >> + { 0x030E, 0x00 }, > >> + { 0x030F, 0xD8 }, > >> + { 0x0310, 0x00 }, > >> + { 0x0820, 0x13 }, > >> + { 0x0821, 0x4C }, > >> + { 0x0822, 0xCC }, > >> + { 0x0823, 0xCC }, > >> +}; > >> + > >> +static const struct imx258_reg mipi_640mbps_19_2mhz[] = { > >> + { 0x0136, 0x13 }, > >> + { 0x0137, 0x33 }, > >> { 0x0301, 0x05 }, > >> { 0x0303, 0x02 }, > >> { 0x0305, 0x03 }, > >> @@ -151,9 +172,27 @@ static const struct imx258_reg mipi_data_rate_640mbps[] = { > >> { 0x0823, 0x00 }, > >> }; > >> > >> +static const struct imx258_reg mipi_642mbps_24mhz[] = { > >> + { 0x0136, 0x18 }, > >> + { 0x0137, 0x00 }, > >> + { 0x0301, 0x05 }, > >> + { 0x0303, 0x02 }, > >> + { 0x0305, 0x04 }, > >> + { 0x0306, 0x00 }, > >> + { 0x0307, 0x6B }, > >> + { 0x0309, 0x0A }, > >> + { 0x030B, 0x01 }, > >> + { 0x030D, 0x02 }, > >> + { 0x030E, 0x00 }, > >> + { 0x030F, 0xD8 }, > >> + { 0x0310, 0x00 }, > >> + { 0x0820, 0x0A }, > >> + { 0x0821, 0x00 }, > >> + { 0x0822, 0x00 }, > >> + { 0x0823, 0x00 }, > >> +}; > >> + > >> static const struct imx258_reg mode_common_regs[] = { > >> - { 0x0136, 0x13 }, > >> - { 0x0137, 0x33 }, > >> { 0x3051, 0x00 }, > >> { 0x3052, 0x00 }, > >> { 0x4E21, 0x14 }, > >> @@ -313,10 +352,6 @@ static const char * const imx258_supply_name[] = { > >> > >> #define IMX258_NUM_SUPPLIES ARRAY_SIZE(imx258_supply_name) > >> > >> -/* Configurations for supported link frequencies */ > >> -#define IMX258_LINK_FREQ_634MHZ 633600000ULL > >> -#define IMX258_LINK_FREQ_320MHZ 320000000ULL > >> - > >> enum { > >> IMX258_LINK_FREQ_1267MBPS, > >> IMX258_LINK_FREQ_640MBPS, > >> @@ -335,25 +370,55 @@ static u64 link_freq_to_pixel_rate(u64 f) > >> } > >> > >> /* Menu items for LINK_FREQ V4L2 control */ > >> -static const s64 link_freq_menu_items[] = { > >> +/* Configurations for supported link frequencies */ > >> +#define IMX258_LINK_FREQ_634MHZ 633600000ULL > >> +#define IMX258_LINK_FREQ_320MHZ 320000000ULL > >> + > >> +static const s64 link_freq_menu_items_19_2[] = { > >> IMX258_LINK_FREQ_634MHZ, > >> IMX258_LINK_FREQ_320MHZ, > >> }; > >> > >> +/* Configurations for supported link frequencies */ > >> +#define IMX258_LINK_FREQ_636MHZ 636000000ULL > >> +#define IMX258_LINK_FREQ_321MHZ 321000000ULL > > > > These values aren't used outside the array below and the macro names are > > imprecise anyway. Could you put the numerical values to the array instead? > > Ok I've removed the defines and just threw the values into the array instead. > > > > >> + > >> +static const s64 link_freq_menu_items_24[] = { > >> + IMX258_LINK_FREQ_636MHZ, > >> + IMX258_LINK_FREQ_321MHZ, > >> +}; > >> + > >> /* Link frequency configs */ > >> -static const struct imx258_link_freq_config link_freq_configs[] = { > >> +static const struct imx258_link_freq_config link_freq_configs_19_2[] = { > >> [IMX258_LINK_FREQ_1267MBPS] = { > >> .pixels_per_line = IMX258_PPL_DEFAULT, > >> .reg_list = { > >> - .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps), > >> - .regs = mipi_data_rate_1267mbps, > >> + .num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz), > >> + .regs = mipi_1267mbps_19_2mhz, > >> } > >> }, > >> [IMX258_LINK_FREQ_640MBPS] = { > >> .pixels_per_line = IMX258_PPL_DEFAULT, > >> .reg_list = { > >> - .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps), > >> - .regs = mipi_data_rate_640mbps, > >> + .num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz), > >> + .regs = mipi_640mbps_19_2mhz, > >> + } > >> + }, > >> +}; > >> + > >> +static const struct imx258_link_freq_config link_freq_configs_24[] = { > >> + [IMX258_LINK_FREQ_1267MBPS] = { > >> + .pixels_per_line = IMX258_PPL_DEFAULT, > >> + .reg_list = { > >> + .num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz), > >> + .regs = mipi_1272mbps_24mhz, > >> + } > >> + }, > >> + [IMX258_LINK_FREQ_640MBPS] = { > >> + .pixels_per_line = IMX258_PPL_DEFAULT, > >> + .reg_list = { > >> + .num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz), > >> + .regs = mipi_642mbps_24mhz, > >> } > >> }, > >> }; > >> @@ -410,6 +475,9 @@ struct imx258 { > >> /* Current mode */ > >> const struct imx258_mode *cur_mode; > >> > >> + const struct imx258_link_freq_config *link_freq_configs; > >> + const s64 *link_freq_menu_items; > >> + > >> /* > >> * Mutex for serialized access: > >> * Protect sensor module set pad format and start/stop streaming safely. > >> @@ -713,7 +781,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, > >> imx258->cur_mode = mode; > >> __v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index); > >> > >> - link_freq = link_freq_menu_items[mode->link_freq_index]; > >> + link_freq = imx258->link_freq_menu_items[mode->link_freq_index]; > >> pixel_rate = link_freq_to_pixel_rate(link_freq); > >> __v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate); > >> /* Update limits and set FPS to default */ > >> @@ -727,7 +795,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, > >> vblank_def); > >> __v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def); > >> h_blank = > >> - link_freq_configs[mode->link_freq_index].pixels_per_line > >> + imx258->link_freq_configs[mode->link_freq_index].pixels_per_line > >> - imx258->cur_mode->width; > >> __v4l2_ctrl_modify_range(imx258->hblank, h_blank, > >> h_blank, 1, h_blank); > >> @@ -747,7 +815,7 @@ static int imx258_start_streaming(struct imx258 *imx258) > >> > >> /* Setup PLL */ > >> link_freq_index = imx258->cur_mode->link_freq_index; > >> - reg_list = &link_freq_configs[link_freq_index].reg_list; > >> + reg_list = &imx258->link_freq_configs[link_freq_index].reg_list; > >> ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs); > >> if (ret) { > >> dev_err(&client->dev, "%s failed to set plls\n", __func__); > >> @@ -946,9 +1014,9 @@ static int imx258_init_controls(struct imx258 *imx258) > >> imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, > >> &imx258_ctrl_ops, > >> V4L2_CID_LINK_FREQ, > >> - ARRAY_SIZE(link_freq_menu_items) - 1, > >> + ARRAY_SIZE(link_freq_menu_items_19_2) - 1, > >> 0, > >> - link_freq_menu_items); > >> + imx258->link_freq_menu_items); > >> > >> if (imx258->link_freq) > >> imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; > >> @@ -964,8 +1032,10 @@ static int imx258_init_controls(struct imx258 *imx258) > >> if (vflip) > >> vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY; > >> > >> - pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]); > >> - pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]); > >> + pixel_rate_max = > >> + link_freq_to_pixel_rate(imx258->link_freq_menu_items[0]); > >> + pixel_rate_min = > >> + link_freq_to_pixel_rate(imx258->link_freq_menu_items[1]); > > > > The arrays currently have two entries so this works but it'd nice to have a > > bit more robust way to handle differences between the two arrays. Could you > > maintain e.g. the number of entries in the array in a struct field perhaps? > > Would it make more sense to do something like default to index 0 and then use > ARRAY_SIZE to iterate through the array and do a comparison to get the min and > max size so it would always choose the correct value no matter how many entries > there are? I'll check that later patch you mentioned in the follow-up separately.
diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c index 351add1bc5d5..6ee7de079454 100644 --- a/drivers/media/i2c/imx258.c +++ b/drivers/media/i2c/imx258.c @@ -76,9 +76,6 @@ #define REG_CONFIG_MIRROR_FLIP 0x03 #define REG_CONFIG_FLIP_TEST_PATTERN 0x02 -/* Input clock frequency in Hz */ -#define IMX258_INPUT_CLOCK_FREQ 19200000 - struct imx258_reg { u16 address; u8 val; @@ -115,7 +112,9 @@ struct imx258_mode { }; /* 4208x3120 needs 1267Mbps/lane, 4 lanes */ -static const struct imx258_reg mipi_data_rate_1267mbps[] = { +static const struct imx258_reg mipi_1267mbps_19_2mhz[] = { + { 0x0136, 0x13 }, + { 0x0137, 0x33 }, { 0x0301, 0x05 }, { 0x0303, 0x02 }, { 0x0305, 0x03 }, @@ -133,7 +132,29 @@ static const struct imx258_reg mipi_data_rate_1267mbps[] = { { 0x0823, 0xCC }, }; -static const struct imx258_reg mipi_data_rate_640mbps[] = { +static const struct imx258_reg mipi_1272mbps_24mhz[] = { + { 0x0136, 0x18 }, + { 0x0137, 0x00 }, + { 0x0301, 0x05 }, + { 0x0303, 0x02 }, + { 0x0305, 0x04 }, + { 0x0306, 0x00 }, + { 0x0307, 0xD4 }, + { 0x0309, 0x0A }, + { 0x030B, 0x01 }, + { 0x030D, 0x02 }, + { 0x030E, 0x00 }, + { 0x030F, 0xD8 }, + { 0x0310, 0x00 }, + { 0x0820, 0x13 }, + { 0x0821, 0x4C }, + { 0x0822, 0xCC }, + { 0x0823, 0xCC }, +}; + +static const struct imx258_reg mipi_640mbps_19_2mhz[] = { + { 0x0136, 0x13 }, + { 0x0137, 0x33 }, { 0x0301, 0x05 }, { 0x0303, 0x02 }, { 0x0305, 0x03 }, @@ -151,9 +172,27 @@ static const struct imx258_reg mipi_data_rate_640mbps[] = { { 0x0823, 0x00 }, }; +static const struct imx258_reg mipi_642mbps_24mhz[] = { + { 0x0136, 0x18 }, + { 0x0137, 0x00 }, + { 0x0301, 0x05 }, + { 0x0303, 0x02 }, + { 0x0305, 0x04 }, + { 0x0306, 0x00 }, + { 0x0307, 0x6B }, + { 0x0309, 0x0A }, + { 0x030B, 0x01 }, + { 0x030D, 0x02 }, + { 0x030E, 0x00 }, + { 0x030F, 0xD8 }, + { 0x0310, 0x00 }, + { 0x0820, 0x0A }, + { 0x0821, 0x00 }, + { 0x0822, 0x00 }, + { 0x0823, 0x00 }, +}; + static const struct imx258_reg mode_common_regs[] = { - { 0x0136, 0x13 }, - { 0x0137, 0x33 }, { 0x3051, 0x00 }, { 0x3052, 0x00 }, { 0x4E21, 0x14 }, @@ -313,10 +352,6 @@ static const char * const imx258_supply_name[] = { #define IMX258_NUM_SUPPLIES ARRAY_SIZE(imx258_supply_name) -/* Configurations for supported link frequencies */ -#define IMX258_LINK_FREQ_634MHZ 633600000ULL -#define IMX258_LINK_FREQ_320MHZ 320000000ULL - enum { IMX258_LINK_FREQ_1267MBPS, IMX258_LINK_FREQ_640MBPS, @@ -335,25 +370,55 @@ static u64 link_freq_to_pixel_rate(u64 f) } /* Menu items for LINK_FREQ V4L2 control */ -static const s64 link_freq_menu_items[] = { +/* Configurations for supported link frequencies */ +#define IMX258_LINK_FREQ_634MHZ 633600000ULL +#define IMX258_LINK_FREQ_320MHZ 320000000ULL + +static const s64 link_freq_menu_items_19_2[] = { IMX258_LINK_FREQ_634MHZ, IMX258_LINK_FREQ_320MHZ, }; +/* Configurations for supported link frequencies */ +#define IMX258_LINK_FREQ_636MHZ 636000000ULL +#define IMX258_LINK_FREQ_321MHZ 321000000ULL + +static const s64 link_freq_menu_items_24[] = { + IMX258_LINK_FREQ_636MHZ, + IMX258_LINK_FREQ_321MHZ, +}; + /* Link frequency configs */ -static const struct imx258_link_freq_config link_freq_configs[] = { +static const struct imx258_link_freq_config link_freq_configs_19_2[] = { [IMX258_LINK_FREQ_1267MBPS] = { .pixels_per_line = IMX258_PPL_DEFAULT, .reg_list = { - .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps), - .regs = mipi_data_rate_1267mbps, + .num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz), + .regs = mipi_1267mbps_19_2mhz, } }, [IMX258_LINK_FREQ_640MBPS] = { .pixels_per_line = IMX258_PPL_DEFAULT, .reg_list = { - .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps), - .regs = mipi_data_rate_640mbps, + .num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz), + .regs = mipi_640mbps_19_2mhz, + } + }, +}; + +static const struct imx258_link_freq_config link_freq_configs_24[] = { + [IMX258_LINK_FREQ_1267MBPS] = { + .pixels_per_line = IMX258_PPL_DEFAULT, + .reg_list = { + .num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz), + .regs = mipi_1272mbps_24mhz, + } + }, + [IMX258_LINK_FREQ_640MBPS] = { + .pixels_per_line = IMX258_PPL_DEFAULT, + .reg_list = { + .num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz), + .regs = mipi_642mbps_24mhz, } }, }; @@ -410,6 +475,9 @@ struct imx258 { /* Current mode */ const struct imx258_mode *cur_mode; + const struct imx258_link_freq_config *link_freq_configs; + const s64 *link_freq_menu_items; + /* * Mutex for serialized access: * Protect sensor module set pad format and start/stop streaming safely. @@ -713,7 +781,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, imx258->cur_mode = mode; __v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index); - link_freq = link_freq_menu_items[mode->link_freq_index]; + link_freq = imx258->link_freq_menu_items[mode->link_freq_index]; pixel_rate = link_freq_to_pixel_rate(link_freq); __v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate); /* Update limits and set FPS to default */ @@ -727,7 +795,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, vblank_def); __v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def); h_blank = - link_freq_configs[mode->link_freq_index].pixels_per_line + imx258->link_freq_configs[mode->link_freq_index].pixels_per_line - imx258->cur_mode->width; __v4l2_ctrl_modify_range(imx258->hblank, h_blank, h_blank, 1, h_blank); @@ -747,7 +815,7 @@ static int imx258_start_streaming(struct imx258 *imx258) /* Setup PLL */ link_freq_index = imx258->cur_mode->link_freq_index; - reg_list = &link_freq_configs[link_freq_index].reg_list; + reg_list = &imx258->link_freq_configs[link_freq_index].reg_list; ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs); if (ret) { dev_err(&client->dev, "%s failed to set plls\n", __func__); @@ -946,9 +1014,9 @@ static int imx258_init_controls(struct imx258 *imx258) imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_LINK_FREQ, - ARRAY_SIZE(link_freq_menu_items) - 1, + ARRAY_SIZE(link_freq_menu_items_19_2) - 1, 0, - link_freq_menu_items); + imx258->link_freq_menu_items); if (imx258->link_freq) imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; @@ -964,8 +1032,10 @@ static int imx258_init_controls(struct imx258 *imx258) if (vflip) vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY; - pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]); - pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]); + pixel_rate_max = + link_freq_to_pixel_rate(imx258->link_freq_menu_items[0]); + pixel_rate_min = + link_freq_to_pixel_rate(imx258->link_freq_menu_items[1]); /* By default, PIXEL_RATE is read only */ imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_PIXEL_RATE, @@ -1086,8 +1156,19 @@ static int imx258_probe(struct i2c_client *client) } else { val = clk_get_rate(imx258->clk); } - if (val != IMX258_INPUT_CLOCK_FREQ) { - dev_err(&client->dev, "input clock frequency not supported\n"); + + switch (val) { + case 19200000: + imx258->link_freq_configs = link_freq_configs_19_2; + imx258->link_freq_menu_items = link_freq_menu_items_19_2; + break; + case 24000000: + imx258->link_freq_configs = link_freq_configs_24; + imx258->link_freq_menu_items = link_freq_menu_items_24; + break; + default: + dev_err(&client->dev, "input clock frequency of %u not supported\n", + val); return -EINVAL; }