@@ -16,7 +16,6 @@
* the project's page is at https://linuxtv.org
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "budget.h"
#include "stv0299.h"
@@ -206,7 +205,7 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
if (slot != 0)
return -EINVAL;
- dprintk(1, "ciintf_slot_reset\n");
+ dprintk(1, "ci slot reset\n");
budget_av->slot_status = SLOTSTATUS_RESET;
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
@@ -235,7 +234,7 @@ static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
if (slot != 0)
return -EINVAL;
- dprintk(1, "ciintf_slot_shutdown\n");
+ dprintk(1, "ci slot shutdown\n");
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
budget_av->slot_status = SLOTSTATUS_NONE;
@@ -251,7 +250,7 @@ static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
if (slot != 0)
return -EINVAL;
- dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
+ dprintk(1, "ci slot status: %d\n", budget_av->slot_status);
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
@@ -1463,7 +1462,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
if (err != 0) {
ttpci_budget_deinit(&budget_av->budget);
kfree(budget_av);
- ERR("cannot init vv subsystem\n");
+ pr_err("cannot init vv subsystem\n");
return err;
}
vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
@@ -1475,7 +1474,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
saa7146_vv_release(dev);
ttpci_budget_deinit(&budget_av->budget);
kfree(budget_av);
- ERR("cannot register capture v4l2 device\n");
+ pr_err("cannot register capture v4l2 device\n");
return err;
}
@@ -124,7 +124,7 @@ static void msp430_ir_interrupt(struct tasklet_struct *t)
*/
if (ir_debug)
- printk("budget_ci: received byte 0x%02x\n", command);
+ pr_info("received byte 0x%02x\n", command);
/* Remove repeat bit, we use every command */
command = command & 0x7f;
@@ -165,7 +165,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
dev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!dev) {
- printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
+ pr_err("IR interface initialisation failed\n");
return -ENOMEM;
}
@@ -224,7 +224,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
error = rc_register_device(dev);
if (error) {
- printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
+ pr_err("could not init driver for IR device (code %d)\n", error);
rc_free_device(dev);
return error;
}
@@ -484,7 +484,7 @@ static int ciintf_init(struct budget_ci *budget_ci)
result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
&budget_ci->ca, ca_flags, 1);
if (result != 0) {
- printk("budget_ci: CI interface detected, but initialisation failed.\n");
+ pr_err("CI interface detected, but initialisation failed.\n");
goto error;
}
@@ -503,7 +503,7 @@ static int ciintf_init(struct budget_ci *budget_ci)
CICONTROL_RESET, 1, 0);
// success!
- printk("budget_ci: CI interface initialised\n");
+ pr_info("CI interface initialised\n");
budget_ci->budget.ci_present = 1;
// forge a fake CI IRQ so the CAM state is setup correctly
@@ -1356,7 +1356,7 @@ static void frontend_init(struct budget_ci *budget_ci)
budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) {
- printk("%s: No LNBP21 found!\n", __func__);
+ pr_err("%s: No LNBP21 found!\n", __func__);
dvb_frontend_detach(budget_ci->budget.dvb_frontend);
budget_ci->budget.dvb_frontend = NULL;
}
@@ -1367,7 +1367,7 @@ static void frontend_init(struct budget_ci *budget_ci)
budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48);
if (budget_ci->budget.dvb_frontend) {
if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) {
- printk(KERN_ERR "%s: No tda827x found!\n", __func__);
+ pr_err("%s: No tda827x found!\n", __func__);
dvb_frontend_detach(budget_ci->budget.dvb_frontend);
budget_ci->budget.dvb_frontend = NULL;
}
@@ -1379,12 +1379,12 @@ static void frontend_init(struct budget_ci *budget_ci)
if (budget_ci->budget.dvb_frontend) {
if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) {
if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
- printk(KERN_ERR "%s: No LNBP21 found!\n", __func__);
+ pr_err("%s: No LNBP21 found!\n", __func__);
dvb_frontend_detach(budget_ci->budget.dvb_frontend);
budget_ci->budget.dvb_frontend = NULL;
}
} else {
- printk(KERN_ERR "%s: No STB6000 found!\n", __func__);
+ pr_err("%s: No STB6000 found!\n", __func__);
dvb_frontend_detach(budget_ci->budget.dvb_frontend);
budget_ci->budget.dvb_frontend = NULL;
}
@@ -1419,7 +1419,7 @@ static void frontend_init(struct budget_ci *budget_ci)
if (budget_ci->budget.dvb_frontend) {
if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) {
if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
- printk("%s: No LNBP21 found!\n", __func__);
+ pr_err("%s: No LNBP21 found!\n", __func__);
dvb_frontend_detach(budget_ci->budget.dvb_frontend);
budget_ci->budget.dvb_frontend = NULL;
}
@@ -1433,7 +1433,7 @@ static void frontend_init(struct budget_ci *budget_ci)
}
if (budget_ci->budget.dvb_frontend == NULL) {
- printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+ pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
budget_ci->budget.dev->pci->vendor,
budget_ci->budget.dev->pci->device,
budget_ci->budget.dev->pci->subsystem_vendor,
@@ -1441,7 +1441,7 @@ static void frontend_init(struct budget_ci *budget_ci)
} else {
if (dvb_register_frontend
(&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
- printk("budget-ci: Frontend registration failed!\n");
+ pr_err("Frontend registration failed!\n");
dvb_frontend_detach(budget_ci->budget.dvb_frontend);
budget_ci->budget.dvb_frontend = NULL;
}
@@ -209,7 +209,7 @@ static void vpeirq(struct tasklet_struct *t)
budget->buffer_warnings++;
if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) {
- printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n",
+ pr_warn("%s %s: used %d times >80%% of buffer (%u bytes now)\n",
budget->dev->name, __func__, budget->buffer_warnings, count);
budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT;
budget->buffer_warnings = 0;
@@ -473,7 +473,7 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev,
budget->dev->name,
budget->buffer_size > budget->buffer_width * budget->buffer_height ? "odd/even" : "single",
budget->buffer_width, budget->buffer_height);
- printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size);
+ pr_info("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size);
ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name,
owner, &budget->dev->pci->dev, adapter_nums);
@@ -537,7 +537,7 @@ static void frontend_init(struct budget *budget)
case 0x4f52: /* Cards based on Philips Semi Sylt PCI ref. design */
budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
- printk(KERN_INFO "budget: tuner ALPS BSRU6 in Philips Semi. Sylt detected\n");
+ pr_info("tuner ALPS BSRU6 in Philips Semi. Sylt detected\n");
budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
break;
@@ -555,7 +555,7 @@ static void frontend_init(struct budget *budget)
/* assume ALPS BSRU6 */
budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap);
if (budget->dvb_frontend) {
- printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n");
+ pr_info("tuner ALPS BSRU6 detected\n");
budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
@@ -571,7 +571,7 @@ static void frontend_init(struct budget *budget)
msleep(250);
budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap);
if (budget->dvb_frontend) {
- printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n");
+ pr_info("tuner ALPS BSBE1 detected\n");
budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
@@ -617,7 +617,7 @@ static void frontend_init(struct budget *budget)
budget->dvb_frontend = fe;
if (dvb_attach(lnbp21_attach, fe, &budget->i2c_adap,
0, 0) == NULL) {
- printk("%s: No LNBP21 found!\n", __func__);
+ pr_err("%s: No LNBP21 found!\n", __func__);
goto error_out;
}
break;
@@ -639,10 +639,10 @@ static void frontend_init(struct budget *budget)
budget->dvb_frontend = fe;
if (dvb_attach(tda826x_attach, fe, 0x60,
&budget->i2c_adap, 0) == NULL)
- printk("%s: No tda826x found!\n", __func__);
+ pr_err("%s: No tda826x found!\n", __func__);
if (dvb_attach(lnbp21_attach, fe,
&budget->i2c_adap, 0, 0) == NULL) {
- printk("%s: No LNBP21 found!\n", __func__);
+ pr_err("%s: No LNBP21 found!\n", __func__);
goto error_out;
}
break;
@@ -694,11 +694,11 @@ static void frontend_init(struct budget *budget)
budget->dvb_frontend,
&budget->i2c_adap,
&tt1600_isl6423_config) == NULL) {
- printk(KERN_ERR "%s: No Intersil ISL6423 found!\n", __func__);
+ pr_err("%s: No Intersil ISL6423 found!\n", __func__);
goto error_out;
}
} else {
- printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__);
+ pr_err("%s: No STV6110(A) Silicon Tuner found!\n", __func__);
goto error_out;
}
}
@@ -719,7 +719,7 @@ static void frontend_init(struct budget *budget)
STV090x_DEMODULATOR_0);
if (budget->dvb_frontend) {
- printk(KERN_INFO "budget: Omicom S2 detected\n");
+ pr_info("Omicom S2 detected\n");
ctl = dvb_attach(stv6110x_attach,
budget->dvb_frontend,
@@ -752,12 +752,11 @@ static void frontend_init(struct budget *budget)
&budget->i2c_adap,
LNBH24_PCL | LNBH24_TTX,
LNBH24_TEN, 0x14>>1) == NULL) {
- printk(KERN_ERR
- "No LNBH24 found!\n");
+ pr_err("No LNBH24 found!\n");
goto error_out;
}
} else {
- printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__);
+ pr_err("%s: No STV6110(A) Silicon Tuner found!\n", __func__);
goto error_out;
}
}
@@ -766,7 +765,7 @@ static void frontend_init(struct budget *budget)
}
if (budget->dvb_frontend == NULL) {
- printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+ pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
budget->dev->pci->vendor,
budget->dev->pci->device,
budget->dev->pci->subsystem_vendor,
@@ -778,7 +777,7 @@ static void frontend_init(struct budget *budget)
return;
error_out:
- printk("budget: Frontend registration failed!\n");
+ pr_err("Frontend registration failed!\n");
dvb_frontend_detach(budget->dvb_frontend);
budget->dvb_frontend = NULL;
}
@@ -798,7 +797,7 @@ static int budget_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d
err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr);
if (err) {
- printk("==> failed\n");
+ pr_err("==> failed\n");
kfree(budget);
return err;
}
@@ -3,6 +3,12 @@
#ifndef __BUDGET_DVB__
#define __BUDGET_DVB__
+#ifdef pr_fmt
+#undef pr_fmt
+#endif
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <media/dvb_frontend.h>
#include <media/dvbdev.h>
#include <media/demux.h>
@@ -23,8 +29,7 @@ extern int budget_debug;
#define dprintk(level, fmt, arg...) do { \
if (level & budget_debug) \
- printk(KERN_DEBUG KBUILD_MODNAME ": %s(): " fmt, \
- __func__, ##arg); \
+ pr_info("%s(): " fmt, __func__, ##arg); \
} while (0)
#define TS_SIZE 188
This patch fixes the following checkpatch warnings: WARNING:PRINTK_WITHOUT_KERN_LEVEL: printk() should include KERN_<LEVEL> facility level WARNING:PREFER_PR_LEVEL: Prefer [subsystem eg: netdev]_dbg([subsystem]dev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ... WARNING:EMBEDDED_FUNCTION_NAME: Prefer using '"%s...", __func__' to using 'ciintf_slot_ts_enable', this function's name, in a string There was no consistent style of logging functions used so far. Convert all logging to the appropriate pr_* macros. Add a global pr_fmt macro for the whole driver. Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de> --- Note: All messages are prefixed with "KBUILD_MODNAME" now. The text of the majority of the messages shouldn't have changed, they had this prefix already. Only a few are changed slightly by adding the "KBUILD_MODNAME" prefix. drivers/media/pci/ttpci/budget-av.c | 11 +++++----- drivers/media/pci/ttpci/budget-ci.c | 24 +++++++++++----------- drivers/media/pci/ttpci/budget-core.c | 4 ++-- drivers/media/pci/ttpci/budget.c | 29 +++++++++++++-------------- drivers/media/pci/ttpci/budget.h | 9 +++++++-- 5 files changed, 40 insertions(+), 37 deletions(-) -- 2.34.0