| Message ID | 20240506164941.110389-9-jacopo.mondi@ideasonboard.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | media: renesas: rcar-csi2: Use the subdev active state | expand |
Hi Jacopo, Thank you for the patch. On Mon, May 06, 2024 at 06:49:36PM +0200, Jacopo Mondi wrote: > Now that the adv748x CSI-2 transmitter drivers validate the supported > formats, it is required for subdevices along the pipeline to produce > and consume the same media bus codes. > > The adv748x analog front end driver use the 2X8 variant of the UYVY8 > media bus code, while the CSI-2 transmitter use the 1X16 variant, which > is the correct one to use for the serial bus. > > Make the adv748x afe use the 1X16 format variant to maintain the > pipeline validation correct. > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/media/i2c/adv748x/adv748x-afe.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c > index 50d9fbadbe38..5edb3295dc58 100644 > --- a/drivers/media/i2c/adv748x/adv748x-afe.c > +++ b/drivers/media/i2c/adv748x/adv748x-afe.c > @@ -114,7 +114,7 @@ static void adv748x_afe_fill_format(struct adv748x_afe *afe, > { > memset(fmt, 0, sizeof(*fmt)); > > - fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; > + fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; > fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; > fmt->field = V4L2_FIELD_ALTERNATE; > > @@ -337,7 +337,7 @@ static int adv748x_afe_enum_mbus_code(struct v4l2_subdev *sd, > if (code->index != 0) > return -EINVAL; > > - code->code = MEDIA_BUS_FMT_UYVY8_2X8; > + code->code = MEDIA_BUS_FMT_UYVY8_1X16; > > return 0; > }
diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c index 50d9fbadbe38..5edb3295dc58 100644 --- a/drivers/media/i2c/adv748x/adv748x-afe.c +++ b/drivers/media/i2c/adv748x/adv748x-afe.c @@ -114,7 +114,7 @@ static void adv748x_afe_fill_format(struct adv748x_afe *afe, { memset(fmt, 0, sizeof(*fmt)); - fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; + fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; fmt->field = V4L2_FIELD_ALTERNATE; @@ -337,7 +337,7 @@ static int adv748x_afe_enum_mbus_code(struct v4l2_subdev *sd, if (code->index != 0) return -EINVAL; - code->code = MEDIA_BUS_FMT_UYVY8_2X8; + code->code = MEDIA_BUS_FMT_UYVY8_1X16; return 0; }
Now that the adv748x CSI-2 transmitter drivers validate the supported formats, it is required for subdevices along the pipeline to produce and consume the same media bus codes. The adv748x analog front end driver use the 2X8 variant of the UYVY8 media bus code, while the CSI-2 transmitter use the 1X16 variant, which is the correct one to use for the serial bus. Make the adv748x afe use the 1X16 format variant to maintain the pipeline validation correct. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> --- drivers/media/i2c/adv748x/adv748x-afe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)